diff --git a/1008.tex b/1008.tex
new file mode 100644
index 0000000..135c61b
--- /dev/null
+++ b/1008.tex
@@ -0,0 +1,88 @@
+\input{preamble.tex}
+\graphicspath{{images/1008}{images}}
+
+\title{1008 VHDCI Carrier}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 1}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{8 channels}
+        \item{8 internal EEM connectors}
+        \item{2 external VHDCI connectors}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{Break out VHDCI to extension boards}
+        \item{Carry signals over VHDCI between crates}
+        \item{Low-cost alternative to DRTIO}
+        \item{Adapter for certain KC705 ARTIQ systems}
+    \end{itemize}
+
+\section{General Description}
+
+    The 1008 VHDCI Carrier is a 4hp EEM module, part of the ARTIQ/Sinara family. It is a passive adapter card which converts VHDCI connections to or from EEM connections.
+
+    The 1008 VHDCI Carrier is bidirectional; it can be driven by a core device carrier board, or can drive other cards.
+
+    A pair of VHDCI Carrier cards can be paired with VHDCI SCSI-3 cables to carry EEM signals over short distances between crates. Depending on the application, this can serve as a simple, low-cost, low-latency alternative to multiple core devices and ARTIQ DRTIO.
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.5in]{photo1008.jpg}
+    \caption{VHDCI Carrier card}
+    \includegraphics[height=2.5in, angle=90]{fp1008.pdf}
+    \caption{VHDCI Carrier front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{1008 VHDCI Carrier}{https://github.com/sinara-hw/VHDCI_Carrier}
+
+\section{Electrical Specifications}
+
+    \begin{table}[h]
+        \centering
+        \begin{threeparttable}
+        \caption{Electrical Specifications}
+        \begin{tabularx}{0.65\textwidth}{l | c | c | X}
+            \thickhline
+            \textbf{Parameter} & \textbf{Max. Value} & \textbf{Unit} & \textbf{Conditions} \\
+            \thickhline
+        \end{tabularx}
+        \end{threeparttable}
+    \end{table}
+
+    Power supply is required when driving EEM cards. 12V should be supplied through barrel jacks (2.50 mm ID, 5.50 mm OD) either in front panel or at back of card.
+
+\ordersection{1008 VHDCI Carrier}
+
+\finalfootnote
+
+\end{document}
diff --git a/images/1008/fp1008.pdf b/images/1008/fp1008.pdf
new file mode 100644
index 0000000..abc8871
Binary files /dev/null and b/images/1008/fp1008.pdf differ
diff --git a/images/1008/photo1008.jpg b/images/1008/photo1008.jpg
new file mode 100644
index 0000000..c4f5952
Binary files /dev/null and b/images/1008/photo1008.jpg differ