1008: init

1008.tex

@@ -0,0 +1,88 @@
+\input{preamble.tex}
+\graphicspath{{images/1008}{images}}
+
+\title{1008 VHDCI Carrier}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 1}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{8 channels}
+        \item{8 internal EEM connectors}
+        \item{2 external VHDCI connectors}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{Break out VHDCI to extension boards}
+        \item{Carry signals over VHDCI between crates}
+        \item{Low-cost alternative to DRTIO}
+        \item{Adapter for certain KC705 ARTIQ systems}
+    \end{itemize}
+
+\section{General Description}
+
+The 1008 VHDCI Carrier is a 4hp EEM module, part of the ARTIQ/Sinara family. It is a passive adapter card which converts VHDCI connections to or from EEM connections.
+
+The 1008 VHDCI Carrier is bidirectional; it can be driven by a core device carrier board, or can drive other cards.
+
+A pair of VHDCI Carrier cards can be paired with VHDCI SCSI-3 cables to carry EEM signals over short distances between crates. Depending on the application, this can serve as a simple, low-cost, low-latency alternative to multiple core devices and ARTIQ DRTIO.
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.5in]{photo1008.jpg}
+    \caption{VHDCI Carrier card}
+    \includegraphics[height=2.5in, angle=90]{fp1008.pdf}
+    \caption{VHDCI Carrier front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{1008 VHDCI Carrier}{https://github.com/sinara-hw/VHDCI_Carrier}
+
+\section{Electrical Specifications}
+
+    \begin{table}[h]
+        \centering
+        \begin{threeparttable}
+        \caption{Electrical Specifications}
+        \begin{tabularx}{0.65\textwidth}{l | c | c | X}
+            \thickhline
+            \textbf{Parameter} & \textbf{Max. Value} & \textbf{Unit} & \textbf{Conditions} \\
+            \thickhline
+        \end{tabularx}
+        \end{threeparttable}
+    \end{table}
+
+    Power supply is required when driving EEM cards. 12V should be supplied through barrel jacks (2.50 mm ID, 5.50 mm OD) either in front panel or at back of card.
+
+\ordersection{1008 VHDCI Carrier}
+
+\finalfootnote
+
+\end{document}

1106.tex

@@ -1,97 +0,0 @@
-\input{preamble.tex}
-\graphicspath{{images/1106}, {images}}
-
-\title{1106 EEM AC Power Module}
-\author{M-Labs Limited}
-\date{January 2025}
-\revision{Revision 1}
-\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
-
-\begin{document}
-\maketitle
-
-\section{Features}
-
-    \begin{itemize}
-        \item{Front panel IEC inlet}
-        \item{80-264V input range}
-        \item{Five 4-pin Molex MiniFit outputs}
-        \item{EMC filter}
-    \end{itemize}
-
-\section{Applications}
-
-    \begin{itemize}
-        \item{Power supply for ARTIQ/Sinara systems}
-        \item{Provides 400W at 25CFM cooling, 200W with free air convection}
-    \end{itemize}
-
-\section{General Description}
-
-    The 1106 EEM AC Power Module is a 8hp EEM form factor module, part of the ARTIQ/Sinara family. It serves as an in-crate power supply to other Sinara cards such as 1124 Carrier Kasli 2.0 and 1125 Carrier Kasli-SoC.
-
-    The AC Power Module features universal IEC input in the front panel and five 4-pin Molex output, directly compatible with Kasli Carriers, at the very rear side of the module. The mains circuit is protected by a steel cover.
-
-% Switch to next column
-\vfill\break
-
-%\begin{figure}[h]
-%    \centering
-%    \scalebox{1.15}{
-%    \begin{circuitikz}[european, every label/.append style={align=center}]
-%        \begin{scope}[]
-%            % if applicable
-%        \end{scope}
-%    \end{circuitikz}
-%    }
-
-%    \caption{Simplified Block Diagram}
-%\end{figure}
-
-\begin{figure}[hbt!]
-    \centering
-    \includegraphics[height=2.5in]{photo1106.jpg}
-    \caption{EEM AC Power Module with handle}
-    \includegraphics[height=2.5in, angle=90]{fp1106.pdf}
-    \caption{EEM AC Power Module front panel}
-\end{figure}
-
-% For wide tables, a single column layout is better. It can be switched
-% page-by-page.
-\onecolumn
-
-\sourcesection{1106 EEM AC Power Module}{https://github.com/sinara-hw/EEM_PWR_MOD_AC}
-
-\section{Electrical Specifications}
-
-Specifications of parameters are based on the datasheet of the EPP-400-12 power supply\footnote{\url{https://www.meanwell.com/upload/pdf/EPP-400/EPP-400-SPEC.PDF}}.
-
-\begin{table}[h]
-\centering
-\begin{threeparttable}
-\caption{Electrical Specifications}
-\begin{tabularx}{0.75\textwidth}{l | c c c | c | X}
-    \thickhline
-    \textbf{Parameter} & \textbf{Min} & \textbf{Typ.} & \textbf{Max} & \textbf{Unit} & \textbf{Conditions} \\
-    \hline
-    Output voltage & & 12 & & V & \\ \hline
-    \multirow{2}{*}{Rated current} & & 33.3 & & \multirow{2}{*}{A} & 25CFM forced cooling \\ \cline{2-4}
-        & & 20.8 & & & Convection \\ \hline
-    \multirow{2}{*}{Rated power} & & 399.6 & & \multirow{2}{*}{W} & 25CFM forced cooling \\ \cline{2-4}
-        & & 249.6 & & & Convection \\ \hline
-    Input voltage           & 80 & & 264    & VAC & \\ \hline
-    Input frequency range   & 47 & & 63     & Hz  & \\ \hline
-    \thickhline
-\end{tabularx}
-\end{threeparttable}
-\end{table}
-
-\section{Indicator LEDs}
-
-The 1106 EEM AC Power Module features several indicator LEDs. Four serve as current indicators signaling 25\%, 50\%, 75\% and 100\% load. \texttt{12V} LED signals power on. Additional \texttt{OVERTEMP} LED signals overtemp or overload.
-
-\ordersection{1106 EEM AC Power Module}
-
-\finalfootnote
-
-\end{document}