diff --git a/2118-2128.tex b/2118-2128.tex index 1717f30..c3f1141 100644 --- a/2118-2128.tex +++ b/2118-2128.tex @@ -4,8 +4,6 @@ \usepackage{minted} \usepackage{tcolorbox} \usepackage{etoolbox} -\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}% -\AfterEndEnvironment{minted}{\end{tcolorbox}}% \usepackage[justification=centering]{caption} @@ -68,6 +66,11 @@ The card support a minimum pulse width of 3ns. \newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}} \newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}} \newcommand{\repeatfootnote}[1]{\textsuperscript{\ref{#1}}} +\newcommand{\inputcolorboxminted}[2]{% + \begin{tcolorbox}[colback=white] + \inputminted[#1, gobble=4]{python}{#2} + \end{tcolorbox} +} \begin{figure}[h] \centering @@ -434,78 +437,27 @@ Timing accuracy in the examples below is well under 1 nanosecond thanks to the A \subsection{One pulse per second} The channel should be configured as output in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - while True: - self.ttl0.pulse(500*ms) - delay(500*ms) -\end{minted} +\inputcolorboxminted{firstline=9,lastline=15}{examples/ttl.py} \newpage \subsection{Morse code} This example demonstrates some basic algorithmic features of the ARTIQ-Python language. -\begin{minted}{python} -def prepare(self): - # As of ARTIQ-6, the ARTIQ compiler has limited string handling - # capabilities, so we pass a list of integers instead. - message = ".- .-. - .. --.-" - self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message] - -@kernel -def run(self): - self.core.reset() - for cmd in self.commands: - if cmd == 1: - self.led.pulse(100*ms) - delay(100*ms) - if cmd == 2: - self.led.pulse(300*ms) - delay(100*ms) - if cmd == 3: - delay(700*ms) -\end{minted} +\inputcolorboxminted{firstline=23,lastline=40}{examples/ttl.py} \subsection{Counting rising edges in a 1ms window} The channel should be configured as input in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - gate_end_mu = self.ttl0.gate_rising(1*ms) - counts = self.ttl0.count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=48,lastline=53}{examples/ttl.py} This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second. If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second: -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.edgecounter0.gate_rising(1*ms) - counts = self.edgecounter0.fetch_count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=61,lastline=66}{examples/ttl.py} \newpage \subsection{Responding to an external trigger} One channel needs to be configured as input, and the other as output. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.ttlin.gate_rising(5*ms) - timestamp_mu = self.ttlin.timestamp_mu() - at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms)) - self.ttlout.pulse(1*us) -\end{minted} +\inputcolorboxminted{firstline=75,lastline=81}{examples/ttl.py} \section{Ordering Information} To order, please visit \url{https://m-labs.hk} and select the 2118 BNC-TTL/2128 SMA-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}. diff --git a/2238.tex b/2238.tex index d5cc8be..46332ff 100644 --- a/2238.tex +++ b/2238.tex @@ -4,8 +4,6 @@ \usepackage{minted} \usepackage{tcolorbox} \usepackage{etoolbox} -\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}% -\AfterEndEnvironment{minted}{\end{tcolorbox}}% \usepackage[justification=centering]{caption} @@ -65,6 +63,11 @@ This card can achieve higher speed and lower jitter than the isolated 2118/2128 \newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}} \newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}} +\newcommand{\inputcolorboxminted}[2]{% + \begin{tcolorbox}[colback=white] + \inputminted[#1, gobble=4]{python}{#2} + \end{tcolorbox} +} \begin{figure}[h] \centering @@ -560,75 +563,24 @@ Timing accuracy in the examples below is well under 1 nanosecond thanks to the A \subsection{One pulse per second} The channel should be configured as output in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - while True: - self.ttl0.pulse(500*ms) - delay(500*ms) -\end{minted} +\inputcolorboxminted{firstline=9,lastline=15}{examples/ttl.py} \subsection{Morse code} This example demonstrates some basic algorithmic features of the ARTIQ-Python language. -\begin{minted}{python} -def prepare(self): - # As of ARTIQ-6, the ARTIQ compiler has limited string handling - # capabilities, so we pass a list of integers instead. - message = ".- .-. - .. --.-" - self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message] - -@kernel -def run(self): - self.core.reset() - for cmd in self.commands: - if cmd == 1: - self.led.pulse(100*ms) - delay(100*ms) - if cmd == 2: - self.led.pulse(300*ms) - delay(100*ms) - if cmd == 3: - delay(700*ms) -\end{minted} +\inputcolorboxminted{firstline=23,lastline=40}{examples/ttl.py} \newpage \subsection{Counting rising edges in a 1ms window} The channel should be configured as input in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - gate_end_mu = self.ttl0.gate_rising(1*ms) - counts = self.ttl0.count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=48,lastline=53}{examples/ttl.py} This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second. If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second: -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.edgecounter0.gate_rising(1*ms) - counts = self.edgecounter0.fetch_count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=61,lastline=66}{examples/ttl.py} \subsection{Responding to an external trigger} One channel needs to be configured as input, and the other as output. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.ttlin.gate_rising(5*ms) - timestamp_mu = self.ttlin.timestamp_mu() - at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms)) - self.ttlout.pulse(1*us) -\end{minted} +\inputcolorboxminted{firstline=75,lastline=81}{examples/ttl.py} \section{Ordering Information} To order, please visit \url{https://m-labs.hk} and select the 2238 MCX-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}. diff --git a/2245.tex b/2245.tex index a0c575c..79da33e 100644 --- a/2245.tex +++ b/2245.tex @@ -4,8 +4,6 @@ \usepackage{minted} \usepackage{tcolorbox} \usepackage{etoolbox} -\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}% -\AfterEndEnvironment{minted}{\end{tcolorbox}}% \usepackage[justification=centering]{caption} @@ -69,6 +67,11 @@ Only shielded Ethernet Cat-6 cables should be connected. \newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}} \newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}} +\newcommand{\inputcolorboxminted}[2]{% + \begin{tcolorbox}[colback=white] + \inputminted[#1, gobble=4]{python}{#2} + \end{tcolorbox} +} \begin{figure}[h] \centering @@ -466,76 +469,24 @@ Timing accuracy in the examples below is well under 1 nanosecond thanks to the A \subsection{One pulse per second} The channel should be configured as output in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - while True: - self.ttl0.pulse(500*ms) - delay(500*ms) -\end{minted} +\inputcolorboxminted{firstline=9,lastline=15}{examples/ttl.py} \subsection{Morse code} This example demonstrates some basic algorithmic features of the ARTIQ-Python language. -\begin{minted}{python} -def prepare(self): - # As of ARTIQ-6, the ARTIQ compiler has limited string handling - # capabilities, so we pass a list of integers instead. - message = ".- .-. - .. --.-" - self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message] - -@kernel -def run(self): - self.core.reset() - for cmd in self.commands: - if cmd == 1: - self.led.pulse(100*ms) - delay(100*ms) - if cmd == 2: - self.led.pulse(300*ms) - delay(100*ms) - if cmd == 3: - delay(700*ms) -\end{minted} +\inputcolorboxminted{firstline=23,lastline=40}{examples/ttl.py} \newpage - \subsection{Counting rising edges in a 1ms window} The channel should be configured as input in both the gateware and hardware. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - gate_end_mu = self.ttl0.gate_rising(1*ms) - counts = self.ttl0.count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=48,lastline=53}{examples/ttl.py} This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second. If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second: -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.edgecounter0.gate_rising(1*ms) - counts = self.edgecounter0.fetch_count() - print(counts) -\end{minted} +\inputcolorboxminted{firstline=61,lastline=66}{examples/ttl.py} \subsection{Responding to an external trigger} One channel needs to be configured as input, and the other as output. - -\begin{minted}{python} -@kernel -def run(self): - self.core.reset() - self.ttlin.gate_rising(5*ms) - timestamp_mu = self.ttlin.timestamp_mu() - at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms)) - self.ttlout.pulse(1*us) -\end{minted} +\inputcolorboxminted{firstline=75,lastline=81}{examples/ttl.py} \section{Ordering Information} To order, please visit \url{https://m-labs.hk} and select the 2245 LVDS-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}. diff --git a/examples/ttl.py b/examples/ttl.py new file mode 100644 index 0000000..01080eb --- /dev/null +++ b/examples/ttl.py @@ -0,0 +1,81 @@ +from artiq.experiment import * + + +class OnePulsePerSecond(EnvExperiment): + def build(self): + self.setattr_device("core") + self.ttl0 = self.get_device("ttl0") + + @kernel + def run(self): + self.core.reset() + self.core.break_realtime() + while True: + self.ttl0.pulse(500*ms) + delay(500*ms) + + +class MorseCode(EnvExperiment): + def build(self): + self.setattr_device("core") + self.led = self.get_device("led0") + + def prepare(self): + # As of ARTIQ-6, the ARTIQ compiler has limited string handling + # capabilities, so we pass a list of integers instead. + message = ".- .-. - .. --.-" + self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message] + + @kernel + def run(self): + self.core.reset() + for cmd in self.commands: + if cmd == 1: + self.led.pulse(100*ms) + delay(100*ms) + if cmd == 2: + self.led.pulse(300*ms) + delay(100*ms) + if cmd == 3: + delay(700*ms) + + +class SoftwareEdgeCount(EnvExperiment): + def build(self): + self.setattr_device("core") + self.ttl0 = self.get_device("ttl0") + + @kernel + def run(self): + self.core.reset() + gate_end_mu = self.ttl0.gate_rising(1*ms) + counts = self.ttl0.count(gate_end_mu) + print(counts) + + +class EdgeCounter(EnvExperiment): + def build(self): + self.setattr_device("core") + self.edgecounter0 = self.get_device("ttl0_counter") + + @kernel + def run(self): + self.core.reset() + self.edgecounter0.gate_rising(1*ms) + counts = self.edgecounter0.fetch_count() + print(counts) + + +class ExternalTrigger(EnvExperiment): + def build(self): + self.setattr_device("core") + self.ttlin = self.get_device("ttl0") + self.ttlout = self.get_device("ttl4") + + @kernel + def run(self): + self.core.reset() + gate_end_mu = self.ttlin.gate_rising(5*ms) + timestamp_mu = self.ttlin.timestamp_mu(gate_end_mu) + at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms)) + self.ttlout.pulse(1*us)