From 8c2c9ecfe48153d32227a8defc0c76282ac7f107 Mon Sep 17 00:00:00 2001 From: occheung Date: Thu, 9 Jun 2022 11:51:25 +0800 Subject: [PATCH] 5108: mention possible SMA breakout option Updates #13 --- 5108.tex | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/5108.tex b/5108.tex index 78acead..5a30b36 100644 --- a/5108.tex +++ b/5108.tex @@ -37,6 +37,7 @@ \item{1.5 MSPS simultaneously on all channels.} \item{Full scale input voltage $\pm$10mV to $\pm$10V.} \item{BNC connector.} +\item{SMA breakout with 5528 SMA-IDC adapter.} \end{itemize} \section{Applications} @@ -55,6 +56,7 @@ It adds analog-digital converting capabilities to carrier cards such as 1124 Kas It provides 8 analog-to-digital channels, each exposed by a BNC connector. Each channel supports input voltage ranges from \textpm 10mV to \textpm 10V. All channels can be sampled simultaneously. +Channels can broken out to SMA by adding a 5528 SMA-IDC card. 5108 ADC Sampler provides a sample rate of 1.5 MSPS. However, the sample rate in practice is typically limited by the use of ARTIQ-Python kernel code. @@ -163,6 +165,9 @@ However, the sample rate in practice is typically limited by the use of ARTIQ-Py \draw (1.25,0)to[short,o-](1.6,0) ; \end{scope} + % Dwar IDC Port (ADC IN) + \draw (0.8, -1.925) node[twoportshape,t={IDC Port}, circuitikz/bipoles/twoport/width=1.5, scale=0.5] (idc) {}; + % Draw PGIAs % The connections are too complicated for the usual buffer/op-amp symbol \draw (3, 2.45) node[twoportshape,t=\MymyLabel{CH 0}{PGIA}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (pgia0) {}; @@ -174,7 +179,7 @@ However, the sample rate in practice is typically limited by the use of ARTIQ-Py \draw (3, -1.75) node[twoportshape,t=\MymyLabel{CH 6}{PGIA}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (pgia6) {}; \draw (3, -2.45) node[twoportshape,t=\MymyLabel{CH 7}{PGIA}, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (pgia7) {}; - % Drop termination connection to input lines + % Draw termination connection to input lines \draw [-] (0.65, 1.675) -- (0.65, 1.225); \draw [-] (0.75, 1.675) -- (0.75, 0.875); \draw [-] (0.85, 1.675) -- (0.85, 0.525); @@ -184,6 +189,16 @@ However, the sample rate in practice is typically limited by the use of ARTIQ-Py \draw [-] (1.25, 1.675) -- (1.25, -0.875); \draw [-] (1.35, 1.675) -- (1.35, -1.225); + % Draw IDC port (ADC IN) connection to input lines + \draw [-] (0.45, -1.675) -- (0.45, 1.225); + \draw [-] (0.55, -1.675) -- (0.55, 0.875); + \draw [-] (0.65, -1.675) -- (0.65, 0.525); + \draw [-] (0.75, -1.675) -- (0.75, 0.175); + \draw [-] (0.85, -1.675) -- (0.85, -0.175); + \draw [-] (0.95, -1.675) -- (0.95, -0.525); + \draw [-] (1.05, -1.675) -- (1.05, -0.875); + \draw [-] (1.15, -1.675) -- (1.15, -1.225); + % Connect BNC to PGIA, with termination line \draw [-latexslim] (bnc0.east) -- (1.9, 1.225) -- (1.9, 2.45) -- (pgia0.west); \draw [-latexslim] (bnc1.east) -- (2, 0.875) -- (2, 1.75) -- (pgia1.west);