diff --git a/7210.tex b/7210.tex
index 523c2ab..057a3c8 100644
--- a/7210.tex
+++ b/7210.tex
@@ -249,9 +249,9 @@ Specifications are derived based on the datasheets of the clock buffer (ADCLK950
             \hspace{3mm} Peak-to-peak voltage & 0.40 & & 2.40 & V\textsubscript{p-p} & \\
             \hspace{3mm} Frequency & 10 & & 4000 & MHz & \\
     \hline
-    Clock output
-            & & 0.8 & & V\textsubscript{p-p} & \multirow{3}{*}{50\textOmega~load, 100 MHz} \\
-            & & 5 & & dBm & \\
+    Clock output & & & & & \\
+            \hspace{3mm} Peak-to-peak voltage & & 0.8 & & V\textsubscript{p-p} & \multirow{3}{*}{50\textOmega~load, 100 MHz} \\
+            \hspace{3mm} Power & & 5 & & dBm & \\
     \thickhline
 \end{tabularx}
 \end{threeparttable}
@@ -276,7 +276,7 @@ Performance measured against 100 MHz Wenzel Quartz, phase-locked to 10MHz Wenzel
 \end{figure}
 
 \section{Selecting Clock Source}
-Clock input can be supplied to 7210 Clocker using either the internal MMCX connector or the external SMA connector on the front panel. The selection of clock input is configurable by an SPDT switch, located between the MMCX input connector (\texttt{INT CLK IN}) and the MMCX output connectors. See Figure 4.
+Clock input can be supplied to 7210 Clocker using either the internal MMCX connector or the external SMA connector on the front panel. The selection of clock input is configurable by an SPDT switch, located between the MMCX input connector (\texttt{INT CLK IN}) and the MMCX output connectors. See Figure 5.
 \begin{multicols}{2}
 
 Either \texttt{INT} or \texttt{EXT} can be selected.