1106: init

1106.tex

@@ -0,0 +1,97 @@
+\input{preamble.tex}
+\graphicspath{{images/1106}, {images}}
+
+\title{1106 EEM AC Power Module}
+\author{M-Labs Limited}
+\date{January 2025}
+\revision{Revision 1}
+\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
+
+\begin{document}
+\maketitle
+
+\section{Features}
+
+    \begin{itemize}
+        \item{Front panel IEC inlet}
+        \item{80-264V input range}
+        \item{Five 4-pin Molex MiniFit outputs}
+        \item{EMC filter}
+    \end{itemize}
+
+\section{Applications}
+
+    \begin{itemize}
+        \item{Power supply for ARTIQ/Sinara systems}
+        \item{Provides 400W at 25CFM cooling, 200W with free air convection}
+    \end{itemize}
+
+\section{General Description}
+
+    The 1106 EEM AC Power Module is a 8hp EEM form factor module, part of the ARTIQ/Sinara family. It serves as an in-crate power supply to other Sinara cards such as 1124 Carrier Kasli 2.0 and 1125 Carrier Kasli-SoC.
+
+    The AC Power Module features universal IEC input in the front panel and five 4-pin Molex output, directly compatible with Kasli Carriers, at the very rear side of the module. The mains circuit is protected by a steel cover.
+
+% Switch to next column
+\vfill\break
+
+%\begin{figure}[h]
+%    \centering
+%    \scalebox{1.15}{
+%    \begin{circuitikz}[european, every label/.append style={align=center}]
+%        \begin{scope}[]
+%            % if applicable
+%        \end{scope}
+%    \end{circuitikz}
+%    }
+
+%    \caption{Simplified Block Diagram}
+%\end{figure}
+
+\begin{figure}[hbt!]
+    \centering
+    \includegraphics[height=2.5in]{photo1106.jpg}
+    \caption{EEM AC Power Module with handle}
+    \includegraphics[height=2.5in, angle=90]{fp1106.pdf}
+    \caption{EEM AC Power Module front panel}
+\end{figure}
+
+% For wide tables, a single column layout is better. It can be switched
+% page-by-page.
+\onecolumn
+
+\sourcesection{1106 EEM AC Power Module}{https://github.com/sinara-hw/EEM_PWR_MOD_AC}
+
+\section{Electrical Specifications}
+
+Specifications of parameters are based on the datasheet of the EPP-400-12 power supply\footnote{\url{https://www.meanwell.com/upload/pdf/EPP-400/EPP-400-SPEC.PDF}}.
+
+\begin{table}[h]
+\centering
+\begin{threeparttable}
+\caption{Electrical Specifications}
+\begin{tabularx}{0.75\textwidth}{l | c c c | c | X}
+    \thickhline
+    \textbf{Parameter} & \textbf{Min} & \textbf{Typ.} & \textbf{Max} & \textbf{Unit} & \textbf{Conditions} \\
+    \hline
+    Output voltage & & 12 & & V & \\ \hline
+    \multirow{2}{*}{Rated current} & & 33.3 & & \multirow{2}{*}{A} & 25CFM forced cooling \\ \cline{2-4}
+        & & 20.8 & & & Convection \\ \hline
+    \multirow{2}{*}{Rated power} & & 399.6 & & \multirow{2}{*}{W} & 25CFM forced cooling \\ \cline{2-4}
+        & & 249.6 & & & Convection \\ \hline
+    Input voltage           & 80 & & 264    & VAC & \\ \hline
+    Input frequency range   & 47 & & 63     & Hz  & \\ \hline
+    \thickhline
+\end{tabularx}
+\end{threeparttable}
+\end{table}
+
+\section{Indicator LEDs}
+
+The 1106 EEM AC Power Module features several indicator LEDs. Four serve as current indicators signaling 25\%, 50\%, 75\% and 100\% load. \texttt{12V} LED signals power on. Additional \texttt{OVERTEMP} LED signals overtemp or overload.
+
+\ordersection{1106 EEM AC Power Module}
+
+\finalfootnote
+
+\end{document}