From 2838213457f0b3afb0299c0b9f4eca244c73fc3f Mon Sep 17 00:00:00 2001 From: occheung Date: Fri, 17 Jun 2022 16:12:27 +0800 Subject: [PATCH] fix language --- 2118-2128.tex | 2 +- 5518-5528.tex | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/2118-2128.tex b/2118-2128.tex index 5b11e21..0a4d068 100644 --- a/2118-2128.tex +++ b/2118-2128.tex @@ -562,7 +562,7 @@ The channel should be configured as output in both the gateware and hardware. \subsection{Sub-coarse-RTIO-cycle pulse} With the use of the ARTIQ RTIO, only 1 event can be enqueued per coarse RTIO cycle, which is typically 8ns. Therefore, to emit a pulse that is less than 8ns, additional delay is needed such that the \texttt{ttl.on()} \& \texttt{ttl.off()} event are submitted at different coarse RTIO cycles. -The TTL pulse parameter must satisfy the minimum pulse width stated in the electircal specifications. +The TTL pulse must satisfy the minimum pulse width stated in the electircal specifications. \inputcolorboxminted{firstline=88,lastline=92}{examples/ttl.py} diff --git a/5518-5528.tex b/5518-5528.tex index 4c3f192..2be02bd 100644 --- a/5518-5528.tex +++ b/5518-5528.tex @@ -52,7 +52,7 @@ \section{General Description} The 5518 BNC-IDC card is a 8hp EEM module, while the 5528 SMA-IDC card is a 4hp EEM module. -Both adapter cards breaks out analog signal from IDC connectors to BNC (5518) or SMA (5528). +Both adapter cards break out analog signal from IDC connectors to BNC (5518) or SMA (5528). IDC connectors can be found on 5108 Sampler, 5432 DAC Zotino, 5632 DAC Fastino \& 5568 HD68-IDC. Each card provides 8 channels, with BNC (5518) or SMA (5528) connectors.