diff --git a/5518-5528.tex b/5518-5528.tex new file mode 100644 index 0000000..4c3f192 --- /dev/null +++ b/5518-5528.tex @@ -0,0 +1,384 @@ +\documentclass[10pt]{datasheet} +\usepackage{palatino} +\usepackage{textgreek} +\usepackage{minted} +\usepackage{tcolorbox} +\usepackage{etoolbox} + +\usepackage[justification=centering]{caption} + +\usepackage[utf8]{inputenc} +\usepackage[english]{babel} +\usepackage[english]{isodate} + +\usepackage{graphicx} +\usepackage{subfig} + +\usepackage{tikz} +\usepackage{pgfplots} +\usepackage{circuitikz} +\usepackage{pifont} +\usetikzlibrary{calc} +\usetikzlibrary{fit,backgrounds} + +\title{5518 BNC-IDC / 5528 SMA-IDC} +\author{M-Labs Limited} +\date{January 2022} +\revision{Revision 1} +\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}} + +\begin{document} +\maketitle + +\section{Features} + +\begin{itemize} + \item{8 channels.} + \item{Internal IDC connector.} + \item{External BNC or SMA connectors.} +\end{itemize} + +\section{Applications} + +\begin{itemize} + \item{Breaks out analog signals.} + \item{BNC or SMA adapters for: \begin{itemize} + \item{5432 DAC Zotino} + \item{5632 DAC Fastino} + \end{itemize}} + \item{(5528 only) SMA adapter for 5108 Sampler.} + \item{Convert from/to HD68 with 5568 HD68-IDC.} +\end{itemize} + +\section{General Description} +The 5518 BNC-IDC card is a 8hp EEM module, while the 5528 SMA-IDC card is a 4hp EEM module. +Both adapter cards breaks out analog signal from IDC connectors to BNC (5518) or SMA (5528). +IDC connectors can be found on 5108 Sampler, 5432 DAC Zotino, 5632 DAC Fastino \& 5568 HD68-IDC. + +Each card provides 8 channels, with BNC (5518) or SMA (5528) connectors. +Breaking out all 32 channels from 5432 DAC Zotino, 5632 DAC Fastino or 5568 HD68-IDC requires 4 BNC/SMA-IDC cards. +Only 1 BNC/SMA-IDC is required to break out all 8 ADC channels from a 5108 Sampler. + +% Switch to next column +\vfill\break + +\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}} +\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}} +\newcommand{\repeatfootnote}[1]{\textsuperscript{\ref{#1}}} +\newcommand{\inputcolorboxminted}[2]{% + \begin{tcolorbox}[colback=white] + \inputminted[#1, gobble=4]{python}{#2} + \end{tcolorbox} +} + +\begin{figure}[h] + \centering + \scalebox{0.95}{ + \begin{circuitikz}[european, scale=1.2, every label/.append style={align=center}] + + \begin{scope}[] + + % Node to pin-point the locations of IO symbols + \draw[color=white, text=black] (-0.1, 2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io0) {}; + \draw[color=white, text=black] (-0.1, 1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io1) {}; + \draw[color=white, text=black] (-0.1, 1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io2) {}; + \draw[color=white, text=black] (-0.1, 0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io3) {}; + \draw[color=white, text=black] (-0.1, -0.35) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io4) {}; + \draw[color=white, text=black] (-0.1, -1.05) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io5) {}; + \draw[color=white, text=black] (-0.1, -1.75) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io6) {}; + \draw[color=white, text=black] (-0.1, -2.45) node[twoportshape, circuitikz/bipoles/twoport/width=1.2, scale=0.4 ] (io7) {}; + + % Labels for all IO symbols + \node [label=left:\tiny{IO 0}] at (0.25, 2.45) {}; + \node [label=left:\tiny{IO 1}] at (0.25, 1.75) {}; + \node [label=left:\tiny{IO 2}] at (0.25, 1.05) {}; + \node [label=left:\tiny{IO 3}] at (0.25, 0.35) {}; + \node [label=left:\tiny{IO 4}] at (0.25, -0.35) {}; + \node [label=left:\tiny{IO 5}] at (0.25, -1.05) {}; + \node [label=left:\tiny{IO 6}] at (0.25, -1.75) {}; + \node [label=left:\tiny{IO 7}] at (0.25, -2.45) {}; + + % draw all IO symbols + \begin{scope}[scale=0.07 , rotate=-90, xshift=35cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=25cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=15cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=5cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=-5cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=-15cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=-25cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + \begin{scope}[scale=0.07 , rotate=-90, xshift=-35cm, yshift=2cm] + \draw (0,0.65) -- (0,3); + \clip (-1.5,0) rectangle (1.5,1.5); + \draw (0,0) circle(1.5); + \clip (-0.8,0) rectangle (0.8,0.8); + \draw (0,0) circle(0.8); + \end{scope} + + % Draw CH0, CH1 & CH7 CM chokes + \draw (3, 1.2) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm0) {}; + \draw (3, 0.4) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm1) {}; + \draw (3, -1.1) node[twoportshape, t=\MymyLabel{Common Mode}{Line Filter}, circuitikz/bipoles/twoport/width=2.2, scale=0.6] (cm7) {}; + + % Omission dots for other channels + \node at (3, -0.15)[circle,fill,inner sep=0.7pt]{}; + \node at (3, -0.35)[circle,fill,inner sep=0.7pt]{}; + \node at (3, -0.55)[circle,fill,inner sep=0.7pt]{}; + + % IDC26 connector + \draw (5.13, 0) node[twoportshape, t={IDC Port}, circuitikz/bipoles/twoport/width=3.8, scale=0.7, rotate=-90] (idc) {}; + + % Connect IO connectors to CM chokes + \draw [latexslim-latexslim] (io0.east) -- (1.3, 2.45) -- (1.3, 1.2) -- (cm0.west); + \draw [latexslim-latexslim] (io1.east) -- (1.2, 1.75) -- (1.2, 0.4) -- (cm1.west); + \draw [latexslim-latexslim] (io2.east) -- (1.1, 1.05) -- (1.1, -0.15) -- (2.5, -0.15); + \draw [latexslim-latexslim] (io3.east) -- (1.0, 0.35) -- (1.0, -0.25) -- (2.5, -0.25); + \draw [latexslim-latexslim] (io4.east) -- (1.0, -0.35) -- (1.0, -0.35) -- (2.5, -0.35); + \draw [latexslim-latexslim] (io5.east) -- (1.1, -1.05) -- (1.1, -0.45) -- (2.5, -0.45); + \draw [latexslim-latexslim] (io6.east) -- (1.2, -1.75) -- (1.2, -0.55) -- (2.5, -0.55); + \draw [latexslim-latexslim] (io7.east) -- (1.3, -2.45) -- (1.3, -1.1) -- (cm7.west); + + % Connect CM chokes to the IDC connector + \draw [latexslim-latexslim] (cm0.east) -- (4.85, 1.2); + \draw [latexslim-latexslim] (cm1.east) -- (4.85, 0.4); + \draw [latexslim-latexslim] (3.5, -0.15) -- ++(1.35, 0); + \draw [latexslim-latexslim] (3.5, -0.25) -- ++(1.35, 0); + \draw [latexslim-latexslim] (3.5, -0.35) -- ++(1.35, 0); + \draw [latexslim-latexslim] (3.5, -0.45) -- ++(1.35, 0); + \draw [latexslim-latexslim] (3.5, -0.55) -- ++(1.35, 0); + \draw [latexslim-latexslim] (cm7.east) -- (4.85, -1.1); + + \end{scope} + + \end{circuitikz} + } + + \caption{Simplified Block Diagram} +\end{figure} + +\begin{figure}[hbt!] + \centering + \subfloat[\centering BNC-IDC]{{ + \includegraphics[height=2.5in]{BNC_IDC_FP.jpg} + \includegraphics[height=2.5in]{photo5518.jpg} + }}% + \subfloat[\centering SMA-IDC]{{ + \quad + \includegraphics[height=2.5in]{SMA_IDC_FP.pdf} + \quad + }}% + \caption{BNC-IDC/SMA-IDC Card photos}% + \label{fig:example}% +\end{figure} + +% For wide tables, a single column layout is better. It can be switched +% page-by-page. +\onecolumn + +\section{Electrical Specifications} + +Specifications of parameters are based on the datasheet of the +common mode line filter\footnote{\label{cm_choke}https://www.we-online.com/catalog/datasheet/744229.pdf}. +\begin{table}[h] +\centering +\begin{threeparttable} +\caption{Electrical Specifications} +\begin{tabularx}{0.65\textwidth}{l | c | c | c | X} + \thickhline + \textbf{Parameter} & \textbf{Symbol} & \textbf{Max. Value} & \textbf{Unit} & \textbf{Conditions} \\ + \hline + Rated voltage & $V_{R}$ & 80 & V & \\ + \hline + Rated current & $I_{R}$ & 400 & mA & $\Delta T^{*}=40K$ \\ + \thickhline +\end{tabularx} +*$\Delta T$ refers to the temperature of the CM line filter minus the ambient. +\end{threeparttable} +\end{table} + +Impedance characteristics of common mode \& differential mode signal at different frequencies are shown in the following graph. + +\begin{figure}[H] + \centering + \includegraphics[]{idc_cm_choke.pdf} + \caption{Common Mode Line Filter Impedance Characteristics} +\end{figure} + +\newpage + +\section{Channel Mapping} +The following table shows the corresponding channel number of the BNC/SMA-IDC adapter IO ports, when it is connected to Sinara cards that support IDC connections. +\begin{table}[h] + \caption{Channel Mapping of BNC/SMA-IDC to Zotino, Fastino \& HD68-IDC} + \centering + \begin{tabular}{|c|c|c|c|c|c|c|c|c|} + \hline + IDC Port Label & \multicolumn{1}{l|}{IO 0} & \multicolumn{1}{l|}{IO 1} & \multicolumn{1}{l|}{IO 2} & \multicolumn{1}{l|}{IO 3} & \multicolumn{1}{l|}{IO 4} & \multicolumn{1}{l|}{IO 5} & \multicolumn{1}{l|}{IO 6} & \multicolumn{1}{l|}{IO 7} \\ \hline + CH 0-7 & 0 & 1 & 2 & 3 & 4 & 5 & 6 & 7 \\ \hline + CH 8-15 & 8 & 9 & 10 & 11 & 12 & 13 & 14 & 15 \\ \hline + CH 16-23 & 16 & 17 & 18 & 19 & 20 & 21 & 22 & 23 \\ \hline + CH 24-31 & 24 & 25 & 26 & 27 & 28 & 29 & 30 & 31 \\ \hline + \end{tabular} +\end{table} + +\begin{table}[h] + \caption{Channel Mapping of BNC/SMA-IDC to 5108 Sampler} + \centering + \begin{tabular}{|l|l|l|l|l|l|l|l|l|} + \hline + & IO 0 & IO 1 & IO 2 & IO 3 & IO 4 & IO 5 & IO 6 & IO 7 \\ \hline + Sampler Ch. & \multicolumn{1}{c|}{7} & \multicolumn{1}{c|}{6} & \multicolumn{1}{c|}{5} & \multicolumn{1}{c|}{4} & \multicolumn{1}{c|}{3} & \multicolumn{1}{c|}{2} & \multicolumn{1}{c|}{1} & \multicolumn{1}{c|}{0} \\ \hline + \end{tabular} +\end{table} + +\section{Front Panel Drawings} + +\begin{multicols}{2} + +\begin{center} + \centering + \includegraphics[height=2.7in]{bnc_idc_drawings.pdf} + \captionof{figure}{5518 BNC-IDC front panel drawings} +\end{center} + +\begin{center} + \captionof{table}{Bill of Material (5518 Standalone)} + \tiny + \begin{tabular}{|c|c|c|c|} + \hline + Index & Part No. & Qty & Description \\ \hline + 1 & 90506946 & 1 & FP-FRONT PANEL, EXTRUDED, TYPE 2, STATIC, 3Ux8HP \\ \hline + 2 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline + 3 & 3020716 & 0.04 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline + \end{tabular} +\end{center} + +\columnbreak + +\begin{center} + \centering + \includegraphics[height=2.7in]{bnc_idc_assembly.pdf} + \captionof{figure}{5518 BNC-IDC front panel assembly} +\end{center} + +\begin{center} + \captionof{table}{Bill of Material (5518 Assembled)} + \tiny + \begin{tabular}{|c|c|c|c|} + \hline + Index & Part No. & Qty & Description \\ \hline + 1 & 90506946 & 1 & FP-LYKJ 3U8HP PANEL \\ \hline + 2 & 3033098 & 0.04 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline + 3 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline + 4 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline + 5 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline + 6 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline + 7 & 3040005 & 1 & HANDLE 8HP GREY PLASTIC \\ \hline + 8 & 3207076 & 0.01 & SCR M2.5*16 PAN 100 21101-222 \\ \hline + 9 & 3201130 & 0.01 & NUT M2.5 HEX ST NI KIT (100PCS) \\ \hline + 10 & 3211232 & 1 & SCR M2.5*14 PAN PHL SS \\ \hline + 11 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline + \end{tabular} +\end{center} +\end{multicols} + +\begin{multicols}{2} + + \begin{center} + \centering + \includegraphics[height=3in]{sma_idc_drawings.pdf} + \captionof{figure}{5528 SMA-IDC front panel drawings} + \end{center} + + \begin{center} + \captionof{table}{Bill of Material (5528 Standalone)} + \tiny + \begin{tabular}{|c|c|c|c|} + \hline + Index & Part No. & Qty & Description \\ \hline + 1 & 90506946 & 1 & FRONT PANEL 3U 4HP PIU TYPE2 \\ \hline + 2 & 3020716 & 0.02 & SLEEVE GREY PLAS.M2.5 (100PCS) \\ \hline + 3 & 3218843 & 2 & FP-ALIGNMENT PIN (LOCALIZATION) \\ \hline + \end{tabular} + \end{center} + + \columnbreak + + \begin{center} + \centering + \includegraphics[height=3in]{sma_idc_assembly.pdf} + \captionof{figure}{5528 SMA-IDC front panel assembly} + \end{center} + + \begin{center} + \captionof{table}{Bill of Material (5528 Assembled)} + \tiny + \begin{tabular}{|c|c|c|c|} + \hline + Index & Part No. & Qty & Description \\ \hline + 1 & 90506949 & 1 & FP-LYKJ 3U4HP PANEL \\ \hline + 2 & 3001012 & 2 & SCR M2.5*6 PAN PHL NI DIN7985 \\ \hline + 3 & 3010110 & 0.02 & WASHER PLN.M2.7 DIN125 (100X) \\ \hline + 4 & 3010124 & 0.1 & EMC GASKET FABRIC 3U (10PCS) \\ \hline + 5 & 3040012 & 1 & HANDLE 4HP GREY PLASTIC \\ \hline + 6 & 3040138 & 2 & PB HOLDER DIE-CAST \\ \hline + 7 & 3201099 & 0.01 & SCR M2.5*8 OVL PHL ST NI (100EA) \\ \hline + 8 & 3207075 & 0.01 & SCR M2.5*12 PAN 100 21101-221 \\ \hline + 9 & 3033098 & 0.02 & SCREW COLLAR M2.5X12.3 (100X) \\ \hline + \end{tabular} + \end{center} +\end{multicols} + +\section{Ordering Information} +To order, please visit \url{https://m-labs.hk} and select the 5518 BNC-IDC/5528 SMA-IDC in the ARTIQ Sinara crate configuration tool. +The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}. + +\section*{} +\vspace*{\fill} + +\begin{footnotesize} +Information furnished by M-Labs Limited is provided in good faith in the hope that it will be useful. However, no responsibility is assumed by M-Labs Limited for its use. Specifications may be subject to change without notice. +\end{footnotesize} + +\end{document} diff --git a/BNC_IDC_FP.jpg b/BNC_IDC_FP.jpg new file mode 100644 index 0000000..4cc20c5 Binary files /dev/null and b/BNC_IDC_FP.jpg differ diff --git a/SMA_IDC_FP.pdf b/SMA_IDC_FP.pdf new file mode 100644 index 0000000..4f10be3 Binary files /dev/null and b/SMA_IDC_FP.pdf differ diff --git a/bnc_idc_assembly.pdf b/bnc_idc_assembly.pdf new file mode 100644 index 0000000..2a94c18 Binary files /dev/null and b/bnc_idc_assembly.pdf differ diff --git a/bnc_idc_drawings.pdf b/bnc_idc_drawings.pdf new file mode 100644 index 0000000..6cc8b0f Binary files /dev/null and b/bnc_idc_drawings.pdf differ diff --git a/idc_cm_choke.pdf b/idc_cm_choke.pdf new file mode 100644 index 0000000..bc231eb Binary files /dev/null and b/idc_cm_choke.pdf differ diff --git a/photo5518.jpg b/photo5518.jpg new file mode 100644 index 0000000..3615f6f Binary files /dev/null and b/photo5518.jpg differ diff --git a/sma_idc_assembly.pdf b/sma_idc_assembly.pdf new file mode 100644 index 0000000..3b9dd16 Binary files /dev/null and b/sma_idc_assembly.pdf differ diff --git a/sma_idc_drawings.pdf b/sma_idc_drawings.pdf new file mode 100644 index 0000000..6a997e4 Binary files /dev/null and b/sma_idc_drawings.pdf differ