# UART Logs Used for network, booting, and most other issues debugging. ## How to get them First, connect your Kasli/SoC to the PC with a micro-USB cable. Once you turn on the device, wait at least 15 seconds until its fully loaded. ### Development shell 1. `flterm /dev/ttyUSBX`, where `X` is usually third (index 2) from suggested variants. 2. Restart the device with `artiq_flash start` 3. If it didn't work, try all of `/dev/ttyUSBX`, and restart the device ### Older Nix and other Linuxes 1. Install `cutecom` via `nix-shell -p cutecom` or your package manager 2. Run `cutecom` and follow settings from the picture: ![uart_cutecom.png](../img/uart_cutecom.png) 3. Restart the device with `artiq_flash start`, or by power-cycling it (wait 30 seconds before turning on) 4. If it didn't work, try all of `/dev/ttyUSBX`, and restart the device ### Windows TODO