sinara-hw
/
assembly
5
3
Fork 6
Code Issues 5 Pull Requests Packages Projects Releases Activity

fastino: add zero voltage output failure mode #7

Merged
esavkin merged 1 commits from morgan/assembly:fastino_flashing into master 2024-01-11 12:37:21 +08:00
Conversation 0 Commits 1 Files Changed 1 +17 -1
1 changed files with 17 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/hw/zotino_fastino.md
View File

@ -56,3 +56,19 @@ Press ENTER when done.
This may happen when power-cycle is too short. Power down the crate, wait at least 30 seconds, and power up again. This may happen when power-cycle is too short. Power down the crate, wait at least 30 seconds, and power up again.
[Issue](https://github.com/sinara-hw/Zotino/issues/37). [Issue](https://github.com/sinara-hw/Zotino/issues/37).
### Zero voltage output on Fastino
Some Fastino may not output any voltage during testing, usually that means it has no gateware.
Another common symptom of no gateware is that no LEDs are lit up. Whereas if the gateware has been flashed, the PG and FD LEDs will be lit green.
You can flash the gateware with a standalone Kasli/Kasli-SoC:
1. Download the latest `fastino.bin` release from [quartiq/fastino](https://github.com/quartiq/fastino/releases)
2. Run `git clone https://github.com/quartiq/kasli-i2c.git` and place `fastino.bin` in the kasli-i2c directory
2. Connect the Fastino's EEM0 to any available Kasli/Kasli-SoC EEM port (**do not hot-plug**)
3. Power on the standalone Kasli/Kasli-SoC
4. Run `nix-shell -p python311Packages.pyftdi`
5. Run `cd kasli-i2c; python flash_fastino.py 0 EEM<number> write fastino.bin` where `<number>` is the EEM port number on the Kasli/Kasli-SoC side
6. If PG and FD LEDs are lit green, the Fastino is ready.