stabilizer - use Hydra builds, remove mentions of the old version #18
@ -10,9 +10,19 @@ EEM is used for power only, and it can be alternatively powered by 12V barrel ja
|
|||||||
|
|
||||||
Not present in the JSON.
|
Not present in the JSON.
|
||||||
|
|
||||||
## Building
|
## Getting the firmware
|
||||||
|
|
||||||
Pick your poison - firmware version: older with Pounder support or newer with USB serial console - the first works with a hardcoded MQTT broker and (static or dynamic) IP address, the latter is configured like the booster - through a serial console.
|
You can get the firmware from [Hydra](https://nixbld.m-labs.hk/jobset/mcu/mcu-contrib).
|
||||||
|
|
||||||
|
* ``stabilizer-dual-iir`` supports Pounder v1.2 - probably you should flash this one,
|
||||||
|
* ``stabilizer-dual-iir-pounder_v1_0`` supports Pounder 1.0 and 1.1 (legacy),
|
||||||
|
* ``stabilizer-lockin`` is a different application which we do not usually flash.
|
||||||
|
|
||||||
|
These all include changes to the mainline code to include Pounder telemetry.
|
||||||
|
|
||||||
|
### Building (optional)
|
||||||
|
|
||||||
|
Please keep in mind that the firmware from the official Quartiq repository does not include support for Pounder in MQTT, you may need to use a fork for that. But if the stabilizer is without a Pounder, it's also a valid option.
|
||||||
|
|
||||||
There is no Nix Flake support to make things easier, so you need to set up rust and cargo manually. Start with cloning the stabilizer repository and opening a new shell with dfu-util (for flashing) and rustup (for building).
|
There is no Nix Flake support to make things easier, so you need to set up rust and cargo manually. Start with cloning the stabilizer repository and opening a new shell with dfu-util (for flashing) and rustup (for building).
|
||||||
|
|
||||||
@ -30,27 +40,18 @@ rustup update
|
|||||||
rustup default stable
|
rustup default stable
|
||||||
```
|
```
|
||||||
|
|
||||||
Building the older version:
|
Building:
|
||||||
|
|
||||||
```
|
|
||||||
BROKER="MQTT BROKER IP" cargo build --release
|
|
||||||
BROKER="MQTT BROKER IP" cargo objcopy --release --bin dual-iir -- -O binary dual-iir.bin
|
|
||||||
```
|
|
||||||
|
|
||||||
Building the newer version:
|
|
||||||
|
|
||||||
```
|
```
|
||||||
cargo build --release
|
cargo build --release
|
||||||
cargo objcopy --release --bin dual-iir -- -O binary dual-iir.bin
|
cargo objcopy --release --bin dual-iir -- -O binary dual-iir.bin
|
||||||
```
|
```
|
||||||
|
|
||||||
The newer version must be configured with USB console later (try ``help`` command first).
|
|
||||||
|
|
||||||
## Flashing
|
## Flashing
|
||||||
|
|
||||||
Once you have the binary (either built, or received from someone), you can now flash it.
|
Once you have the binary, you can now flash it.
|
||||||
|
|
||||||
Without firmware on the device or with older firmware, you need to use the jumper method:
|
Without firmware on the device or with older firmware (without USB serial console), you need to use the jumper method:
|
||||||
|
|
||||||
1. Have the Stabilizer disconnected from power.
|
1. Have the Stabilizer disconnected from power.
|
||||||
2. Use a jumper of some sort to short BOOT pins on the board.
|
2. Use a jumper of some sort to short BOOT pins on the board.
|
||||||
@ -75,9 +76,11 @@ dfu-util -a 0 -s 0x08000000:leave -R -D dual-iir.bin
|
|||||||
|
|
||||||
7. Look for "File downloaded successfully".
|
7. Look for "File downloaded successfully".
|
||||||
|
|
||||||
|
For normal usage, the stabilizer must be configured with USB console later (try ``help`` command first), to set its IP address and MQTT broker address. However, for general testing (like the one below), you don't need to configure it any further.
|
||||||
|
|
||||||
## Testing
|
## Testing
|
||||||
|
|
||||||
1. Ensure that the [firmware](https://github.com/quartiq/stabilizer) has been flashed onto the Stabilizer
|
1. Ensure that the [firmware](#getting-the-firmware) has been flashed onto the Stabilizer
|
||||||
2. Turn on the crate/Stabilizer via EEM cable or power supply
|
2. Turn on the crate/Stabilizer via EEM cable or power supply
|
||||||
3. Set up the signal generator for an amplitude of 1V, frequency of 10kHz, and a sine wave
|
3. Set up the signal generator for an amplitude of 1V, frequency of 10kHz, and a sine wave
|
||||||
4. Use the splitter to connect the generator's output to ADC0 and to the oscilloscope (refer to the picture below)
|
4. Use the splitter to connect the generator's output to ADC0 and to the oscilloscope (refer to the picture below)
|
||||||
|
Loading…
Reference in New Issue
Block a user