sinara-hw
/
assembly
5
3
Fork 6
Code Issues 5 Pull Requests Packages Projects Releases Activity

mirny: add build and flashing instructions #17

Merged
esavkin merged 1 commits from mwojcik/assembly:mirny-improvements into master 2024-08-17 17:37:24 +08:00
Conversation 1 Commits 1 Files Changed 2 +11 -3
2 changed files with 11 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

BIN
src/extra/mirny/mirny-0.3.1.zip Normal file
View File

Binary file not shown.

14
src/hw/mirny_almazny.md
View File

@ -15,9 +15,15 @@
}
```
## Building firmware
## Getting the firmware
Once you get your hands on the firmware, you will need to work around few shortcomings of Nix, mainly not being able to run dynamically linked executables.
Here is [Mirny 0.3.1 firmware](../extra/mirny/mirny-0.3.1.zip). It contains a single ``.jed`` file that can be flashed following [flashing instructions](#flashing).
### Building firmware (optional)
However, if you need to make chances or build from source, follow these instructions.
Once you get your hands on the firmware source code, you will need to work around few shortcomings of Nix, mainly not being able to run dynamically linked executables.
You will need:
esavkin commented 2024-06-05 10:15:23 +08:00
Review
Copy Link

This better be in Getting the firmware

This better be in `Getting the firmware`
mwojcik commented 2024-06-05 10:27:44 +08:00
Review
Copy Link

There's some overlap (ISE) but not all (no Migen, but xc3sprog). So I just repeated that.

There's some overlap (ISE) but not all (no Migen, but xc3sprog). So I just repeated that.
- Xilinx ISE 14.7 installed on your system (this guide is assuming ``/opt/Xilinx`` path),
@ -53,6 +59,8 @@ python mirny_impl.py
### Flashing
For flashing, you will need Xilinx ISE 14.7 installed on your system (here assuming ``/opt/Xilinx`` path), and ``xc3sprog`` with the appropriate HS2 JTAG adapter.
```shell
nix-shell -p xc3sprog
xc3sprog -c jtaghs2 -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed
@ -142,4 +150,4 @@ You should also see differences in various modes, but that may require disabling
~~Mirnies often fail `ValueError: MUXOUT not high`, in that case restart the tests or reboot the board(s).~~ - fixed in [9569cfb](https://github.com/m-labs/artiq/commit/9569cfb26329c0acdc1705d3256d2506b7bccce5)
For Almazny v1.2+ support, CPLD firmware above 0.3.0 (with fixes) must be flashed onto Mirny.
For Almazny v1.2+ support, CPLD firmware 0.3.1+ (with fixes) must be flashed onto Mirny.