Update phaser and networking

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-06-26 15:43:11 +08:00
parent aa33bb57e4
commit cf840f083a
3 changed files with 7 additions and 6 deletions

View File

@ -26,12 +26,13 @@ phaser0 10+0 10+1 10+2 10+3 10+4 MHz
1. Install gqrx `nix-shell -p gqrx` 1. Install gqrx `nix-shell -p gqrx`
2. Connect bladeRF via USB cable only 2. Connect bladeRF via USB cable only
3. Run gqrx and choose `BladeRF #<number>...` 3. Run gqrx and choose `Nuand bladeRF SN <number>...`
4. Input rate 30000000, other settings are default 4. Input rate 20000000, other settings are default
5. When gqrx loaded, start DSP processing with frequency near 2.875 GHz + frequencies from `artiq_sinara_test` 5. Lower the gain in `Input options`
6. When gqrx loaded, start DSP processing with frequency near 2.875 GHz +- frequencies from `artiq_sinara_test`
in `Receiver Options` in `Receiver Options`
6. Connect the probe through attenuator to the Phaser's ports 7. Connect the probe through attenuator to the Phaser's ports
7. You should see 5 tones on `artiq_sinara_test`'s frequencies, like on the picture below 8. You should see 5 tones on `artiq_sinara_test`'s frequencies, like on the picture below
![](../img/phaser_upconverter_gqrx.png) ![](../img/phaser_upconverter_gqrx.png)

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.3 MiB

After

Width:  |  Height:  |  Size: 2.0 MiB

View File

@ -23,6 +23,6 @@ a-la `I can't connect, please help`.
or connected to different address. If the packets just do not respond then it is not as clear, we cannot know all the truth. or connected to different address. If the packets just do not respond then it is not as clear, we cannot know all the truth.
2. See the SFP0 LED 2. See the SFP0 LED
3. See the ERR LED 3. See the ERR LED
4. UART logs. TODO here is a link to ways to obtain them 4. [UART logs](uart_logs.md)
5. `nmap` and `arp` to scan your network to help your Kasli get discovered. May be restricted in your network. 5. `nmap` and `arp` to scan your network to help your Kasli get discovered. May be restricted in your network.
6. Become a router and capture all the packets when your Kasli tries to connect to the network. 6. Become a router and capture all the packets when your Kasli tries to connect to the network.