mirny: add firmware
This commit is contained in:
parent
440f687bac
commit
6bdd0b61ac
Binary file not shown.
|
@ -15,9 +15,15 @@
|
||||||
}
|
}
|
||||||
```
|
```
|
||||||
|
|
||||||
## Building firmware
|
## Getting the firmware
|
||||||
|
|
||||||
Once you get your hands on the firmware, you will need to work around few shortcomings of Nix, mainly not being able to run dynamically linked executables.
|
Here is [Mirny 0.3.1 firmware](../extra/mirny/mirny-0.3.1.zip). It contains a single ``.jed`` file that can be flashed following [flashing instructions](#flashing).
|
||||||
|
|
||||||
|
### Building firmware (optional)
|
||||||
|
|
||||||
|
However, if you need to make chances or build from source, follow these instructions.
|
||||||
|
|
||||||
|
Once you get your hands on the firmware source code, you will need to work around few shortcomings of Nix, mainly not being able to run dynamically linked executables.
|
||||||
|
|
||||||
You will need:
|
You will need:
|
||||||
- Xilinx ISE 14.7 installed on your system (this guide is assuming ``/opt/Xilinx`` path),
|
- Xilinx ISE 14.7 installed on your system (this guide is assuming ``/opt/Xilinx`` path),
|
||||||
|
@ -53,6 +59,8 @@ python mirny_impl.py
|
||||||
|
|
||||||
### Flashing
|
### Flashing
|
||||||
|
|
||||||
|
For flashing, you will need Xilinx ISE 14.7 installed on your system (here assuming ``/opt/Xilinx`` path), and ``xc3sprog`` with the appropriate HS2 JTAG adapter.
|
||||||
|
|
||||||
```shell
|
```shell
|
||||||
nix-shell -p xc3sprog
|
nix-shell -p xc3sprog
|
||||||
xc3sprog -c jtaghs2 -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed
|
xc3sprog -c jtaghs2 -m /opt/Xilinx/14.7/ISE_DS/ISE/xbr/data -v build/mirny.jed
|
||||||
|
@ -142,4 +150,4 @@ You should also see differences in various modes, but that may require disabling
|
||||||
|
|
||||||
~~Mirnies often fail `ValueError: MUXOUT not high`, in that case restart the tests or reboot the board(s).~~ - fixed in [9569cfb](https://github.com/m-labs/artiq/commit/9569cfb26329c0acdc1705d3256d2506b7bccce5)
|
~~Mirnies often fail `ValueError: MUXOUT not high`, in that case restart the tests or reboot the board(s).~~ - fixed in [9569cfb](https://github.com/m-labs/artiq/commit/9569cfb26329c0acdc1705d3256d2506b7bccce5)
|
||||||
|
|
||||||
For Almazny v1.2+ support, CPLD firmware above 0.3.0 (with fixes) must be flashed onto Mirny.
|
For Almazny v1.2+ support, CPLD firmware 0.3.1+ (with fixes) must be flashed onto Mirny.
|
Loading…
Reference in New Issue