noptica2-sdr/noptica.py

155 lines
4.6 KiB
Python

import serial
import queue
import threading
import SoapySDR
import numpy as np
from scipy.signal import blackmanharris
class BufferedSDR:
def __init__(self, sdr, channels, bufsize, nbufs):
self.sdr = sdr
self.channels = channels
self.bufsize = bufsize
self.stream = None
self.terminate = False
self.thread = None
self.queue = queue.Queue(nbufs)
self.available_buffers = queue.Queue(nbufs)
for _ in range(nbufs):
self.available_buffers.put([np.array([0]*bufsize, np.complex64) for _ in self.channels])
def start(self):
self.stream = self.sdr.setupStream(SoapySDR.SOAPY_SDR_RX, SoapySDR.SOAPY_SDR_CF32, self.channels)
try:
self.thread = threading.Thread(target=self.thread_target)
self.thread.start()
except:
self.sdr.closeStream(self.stream)
raise
def stop(self):
self.terminate = True
self.thread.join()
self.sdr.closeStream(self.stream)
def get(self):
return self.queue.get()
def dispose(self, buffers):
self.available_buffers.put(buffers)
def thread_target(self):
self.sdr.activateStream(self.stream)
try:
while not self.terminate:
buffers = self.available_buffers.get()
sr = self.sdr.readStream(self.stream, buffers, self.bufsize)
if sr.ret != self.bufsize:
print("SDR sampling error")
return
self.queue.put(buffers)
finally:
self.sdr.deactivateStream(self.stream)
class DummyInductionHeater:
def __init__(self, port, induction_min, induction_max):
pass
def start(self):
pass
def set(self, amount):
print("induction", amount)
def stop(self):
pass
class InductionHeater:
"""Interface to the MHS5200A function generator driving the LC tank"""
def __init__(self, port, induction_min, induction_max):
self.port = port
self.induction_min = induction_min
self.induction_max = induction_max
self.queue = queue.Queue(1)
def start(self):
self.serial = serial.Serial(self.port, 57600)
self.thread = threading.Thread(target=self.thread_target)
self.thread.start()
def thread_target(self):
while True:
amount = self.queue.get()
if amount is None:
break
amount = max(min(amount, 0.5), -0.5)
freq = ((self.induction_min + self.induction_max)/2
+ amount*(self.induction_max - self.induction_min))
command = ":s1f{:010d}\n".format(int(freq*1e2))
self.serial.write(command.encode())
self.serial.readline()
def set(self, amount):
self.queue.put(amount, block=False)
def stop(self):
self.queue.put(None, block=True)
self.thread.join()
self.serial.close()
class Stabilizer:
def __init__(self, fft_size, amp_threshold, freq_target, k, tuner):
self.freqs = np.fft.fftfreq(fft_size)
self.amp_threshold = amp_threshold
self.freq_target = freq_target
self.k = k
self.tuner = tuner
def input(self, samples):
spectrum = np.abs(np.fft.fft(samples*blackmanharris(len(samples))))
i = np.argmax(spectrum)
freq = self.freqs[i]
amplitude = spectrum[i]
if amplitude > self.amp_threshold:
tuning = (freq - self.freq_target)*self.k
else:
tuning = 0.0
self.tuner.set(tuning)
def continuous_unwrap(last_phase, last_phase_unwrapped, p):
# note: np.unwrap always preserves first element of array
p = np.unwrap(p)
glue = np.array([last_phase_unwrapped, last_phase_unwrapped + (p[0] - last_phase)])
new_p0 = np.unwrap(glue)[1]
return new_p0 + p - p[0]
class PositionTracker:
def __init__(self, leakage_avg):
self.last_phase = 0.0
self.last_position = 0.0
self.leakage = np.zeros(leakage_avg)
self.leakage_ptr = 0
def input(self, ref, meas):
demod = np.conjugate(ref)*meas
self.leakage[self.leakage_ptr] = np.real(np.sum(demod)/len(demod))
self.leakage_ptr = (self.leakage_ptr + 1) % len(self.leakage)
leakage = np.sum(self.leakage)/len(self.leakage)
phase = np.angle(demod - leakage)
position = continuous_unwrap(self.last_phase, self.last_position, phase)/(2.0*np.pi)
self.last_phase = phase[-1]
self.last_position = position[-1]
return position, leakage