Prior to this change, the neighbor cache would get limited even when the
device failed to process our arp packet, which could put the socket in
the waiting state in the next poll.
This change only limits the cache rate if the device successfully
consumed our packet.
This fixes build on latest nightly. The cause of the breakage
is this commit:
7c4ca59f4b
which added a #[must_use = "if you don't need the old value, you
can just assign the new value directly"] hint to mem::replace.
Disable ethernet-related features and framing based on a feature gate.
Add a no-ethernet option to Travis.
notes:
- allow(unused) is added when not using ethernet feature
- Don't run pretty-print doctest, ethernet is optional.
Closes: #308
Approved by: whitequark
Adds accessor functions to the device implementing the phy::Device trait
within an ethernet interface. The intent is to allow access to read-only
methods such as gathering of device statistics or other diagnostics
while the interface is running. The interface does not hold any internal
invariants on the device, so that a mutable accessor can be added as
well.
Closes: #289
Approved by: whitequark
A regression meant broadcast IPv4 packets were ignored. Restore
handling those packets and also reply to broadcast ICMPv4 echo requests.
Closes#287.
Closes: #288
Approved by: whitequark
Using Routes<'static> used to make these functions impossible because it created a reference that needed to be valid for the static lifetime
Closes: #243
Approved by: dlrobertson
- Add a function to EthernetInterface useful for determining if a
received packet with the source address being a solicited node
address is the solicited node address for an IPv6 address assigned
to the interface.
- Add SOLICITED_NODES_PREFIX to Ipv6Cidr
- Fix some nits
Closes: #175
Approved by: whitequark
Add basic ICMPv6 handling
- ICMPv6
- Handle ICMPv6 echo requests
- Send ICMPv6 error messages
- When know listening UDP socket is found in process_udp
- When the next header is not known
- Update icmpv6 test to be more useful
- ICMPv4
- Handle one more case where we are sending too much data
- Add `process_ipv6` to `EthernetInterface`
- Add basic test for `process_ipv6`
- Add `deny(unused)` if either proto-ipv4 or proto-ipv6 is enabled
- Add `cfg`s where needed to avoid compile time errors due to the above
- There are several warnings that are thrown when running `cargo doc`. Fix
these warnings.
- Convert all module documentation to use /*! for consistency.
- Add MIN_MTU constants to the IP version modules.
- Ensure that ICMPv4 error replies comply with the size requirements
specified in RFC 1812 § 4.3.2.3.
Dario Nieuwenhuis
Alex Crawford
Thales Fragoso
Zhaofeng Li
Scott Mabin
Ruben De Smet
Astro
Andreas Molzer
Adam Greig
Chris Branch
Derk Bell
whitequark
Sidharth Shanker
Dan Robertson
jD91mZM2
Valentin Lorentz
Ole Martin Ruud
whitequark
Dan Robertson
Philipp Oppermann