310 lines
10 KiB
Rust
310 lines
10 KiB
Rust
#![no_std]
|
|
#![no_main]
|
|
|
|
extern crate panic_itm;
|
|
use cortex_m::{iprintln, iprint};
|
|
|
|
use embedded_hal::{
|
|
digital::v2::OutputPin,
|
|
blocking::delay::DelayMs
|
|
};
|
|
use stm32f4xx_hal::{
|
|
rcc::RccExt,
|
|
gpio::GpioExt,
|
|
time::U32Ext,
|
|
stm32::ITM,
|
|
delay::Delay,
|
|
spi::Spi,
|
|
time::Hertz
|
|
};
|
|
use enc424j600;
|
|
use enc424j600::{smoltcp_phy, EthController};
|
|
|
|
use smoltcp::wire::{
|
|
EthernetAddress, IpAddress, IpCidr, Ipv6Cidr
|
|
};
|
|
use smoltcp::iface::{NeighborCache, EthernetInterfaceBuilder, EthernetInterface};
|
|
use smoltcp::socket::{SocketSet, TcpSocket, TcpSocketBuffer};
|
|
use core::str;
|
|
use core::fmt::Write;
|
|
|
|
/// Timer
|
|
use core::cell::RefCell;
|
|
use cortex_m::interrupt::Mutex;
|
|
use cortex_m_rt::exception;
|
|
use stm32f4xx_hal::{
|
|
rcc::Clocks,
|
|
time::MilliSeconds,
|
|
timer::{Timer, Event as TimerEvent},
|
|
stm32::SYST
|
|
};
|
|
use smoltcp::time::Instant;
|
|
/// Rate in Hz
|
|
const TIMER_RATE: u32 = 20;
|
|
/// Interval duration in milliseconds
|
|
const TIMER_DELTA: u32 = 1000 / TIMER_RATE;
|
|
/// Elapsed time in milliseconds
|
|
static TIMER_MS: Mutex<RefCell<u32>> = Mutex::new(RefCell::new(0));
|
|
|
|
/// Setup SysTick exception
|
|
fn timer_setup(syst: SYST, clocks: Clocks) {
|
|
let mut timer = Timer::syst(syst, TIMER_RATE.hz(), clocks);
|
|
timer.listen(TimerEvent::TimeOut);
|
|
}
|
|
|
|
/// SysTick exception (Timer)
|
|
#[exception]
|
|
fn SysTick() {
|
|
cortex_m::interrupt::free(|cs| {
|
|
*TIMER_MS.borrow(cs)
|
|
.borrow_mut() += TIMER_DELTA;
|
|
});
|
|
}
|
|
|
|
/// Obtain current time in milliseconds
|
|
pub fn timer_now() -> MilliSeconds {
|
|
let ms = cortex_m::interrupt::free(|cs| {
|
|
*TIMER_MS.borrow(cs)
|
|
.borrow()
|
|
});
|
|
ms.ms()
|
|
}
|
|
|
|
///
|
|
use stm32f4xx_hal::{
|
|
stm32::SPI1,
|
|
gpio::{
|
|
gpioa::{PA5, PA6, PA7, PA4},
|
|
Alternate, AF5, Output, PushPull
|
|
}
|
|
};
|
|
type BoosterSpiEth = enc424j600::SpiEth<
|
|
Spi<SPI1, (PA5<Alternate<AF5>>, PA6<Alternate<AF5>>, PA7<Alternate<AF5>>)>,
|
|
PA4<Output<PushPull>>,
|
|
fn(u32) -> ()
|
|
>;
|
|
|
|
pub struct NetStorage {
|
|
ip_addrs: [IpCidr; 1],
|
|
neighbor_cache: [Option<(IpAddress, smoltcp::iface::Neighbor)>; 8],
|
|
}
|
|
|
|
static mut NET_STORE: NetStorage = NetStorage {
|
|
// Placeholder for the real IP address, which is initialized at runtime.
|
|
ip_addrs: [IpCidr::Ipv6(
|
|
Ipv6Cidr::SOLICITED_NODE_PREFIX,
|
|
)],
|
|
neighbor_cache: [None; 8],
|
|
};
|
|
|
|
#[rtic::app(device = stm32f4xx_hal::stm32, peripherals = true, monotonic = rtic::cyccnt::CYCCNT)]
|
|
const APP: () = {
|
|
struct Resources {
|
|
eth_iface: EthernetInterface<
|
|
'static,
|
|
'static,
|
|
'static,
|
|
smoltcp_phy::SmoltcpDevice<BoosterSpiEth>>,
|
|
itm: ITM
|
|
}
|
|
|
|
#[init()]
|
|
fn init(mut c: init::Context) -> init::LateResources {
|
|
c.core.SCB.enable_icache();
|
|
c.core.SCB.enable_dcache(&mut c.core.CPUID);
|
|
|
|
// Enable monotonic timer CYCCNT
|
|
c.core.DWT.enable_cycle_counter();
|
|
c.core.DCB.enable_trace();
|
|
|
|
let clocks = c.device.RCC.constrain()
|
|
.cfgr
|
|
.sysclk(168.mhz())
|
|
.hclk(168.mhz())
|
|
.pclk1(42.mhz())
|
|
.require_pll48clk()
|
|
.freeze();
|
|
let mut delay = Delay::new(c.core.SYST, clocks);
|
|
|
|
// Init ITM
|
|
let mut itm = c.core.ITM;
|
|
let stim0 = &mut itm.stim[0];
|
|
|
|
iprintln!(stim0,
|
|
"Eth TCP Server on STM32-F407 via NIC100/ENC424J600");
|
|
|
|
// NIC100 / ENC424J600 Set-up
|
|
let spi1 = c.device.SPI1;
|
|
let gpioa = c.device.GPIOA.split();
|
|
// Mapping: see Table 9, STM32F407ZG Manual
|
|
let spi1_sck = gpioa.pa5.into_alternate_af5();
|
|
let spi1_miso = gpioa.pa6.into_alternate_af5();
|
|
let spi1_mosi = gpioa.pa7.into_alternate_af5();
|
|
let spi1_nss = gpioa.pa4.into_push_pull_output();
|
|
// Map SPISEL: see Table 1, NIC100 Manual
|
|
let mut spisel = gpioa.pa1.into_push_pull_output();
|
|
spisel.set_high().unwrap();
|
|
delay.delay_ms(1_u32);
|
|
spisel.set_low().unwrap();
|
|
|
|
// Create SPI1 for HAL
|
|
let eth_iface = {
|
|
let mut spi_eth = {
|
|
let spi_eth_port = Spi::spi1(
|
|
spi1, (spi1_sck, spi1_miso, spi1_mosi),
|
|
enc424j600::spi::interfaces::SPI_MODE,
|
|
Hertz(enc424j600::spi::interfaces::SPI_CLOCK_FREQ),
|
|
clocks);
|
|
|
|
let delay_ns_fp: fn(u32) -> () = |time_ns| {
|
|
cortex_m::asm::delay((time_ns*21)/125 + 1)
|
|
};
|
|
enc424j600::SpiEth::new(spi_eth_port, spi1_nss, delay_ns_fp)
|
|
};
|
|
|
|
// Init controller
|
|
match spi_eth.init_dev() {
|
|
Ok(_) => {
|
|
iprintln!(stim0, "Initializing Ethernet...")
|
|
}
|
|
Err(_) => {
|
|
panic!("Ethernet initialization failed!")
|
|
}
|
|
}
|
|
|
|
// Read MAC
|
|
let mut eth_mac_addr: [u8; 6] = [0; 6];
|
|
spi_eth.read_from_mac(&mut eth_mac_addr);
|
|
for i in 0..6 {
|
|
let byte = eth_mac_addr[i];
|
|
match i {
|
|
0 => iprint!(stim0, "MAC Address = {:02x}-", byte),
|
|
1..=4 => iprint!(stim0, "{:02x}-", byte),
|
|
5 => iprint!(stim0, "{:02x}\n", byte),
|
|
_ => ()
|
|
};
|
|
}
|
|
|
|
// Init Rx/Tx buffers
|
|
spi_eth.init_rxbuf();
|
|
spi_eth.init_txbuf();
|
|
iprintln!(stim0, "Ethernet controller initialized");
|
|
|
|
// Init smoltcp interface
|
|
let eth_iface = {
|
|
let device = smoltcp_phy::SmoltcpDevice::new(spi_eth);
|
|
|
|
let store = unsafe { &mut NET_STORE };
|
|
store.ip_addrs[0] = IpCidr::new(IpAddress::v4(192, 168, 1, 77), 24);
|
|
let neighbor_cache = NeighborCache::new(&mut store.neighbor_cache[..]);
|
|
|
|
EthernetInterfaceBuilder::new(device)
|
|
.ethernet_addr(EthernetAddress(eth_mac_addr))
|
|
.neighbor_cache(neighbor_cache)
|
|
.ip_addrs(&mut store.ip_addrs[..])
|
|
.finalize()
|
|
};
|
|
iprintln!(stim0, "Ethernet interface initialized");
|
|
|
|
eth_iface
|
|
};
|
|
|
|
// Setup SysTick after releasing SYST from Delay
|
|
// Reference to stm32-eth:examples/ip.rs
|
|
timer_setup(delay.free(), clocks);
|
|
iprintln!(stim0, "Timer initialized");
|
|
|
|
init::LateResources {
|
|
eth_iface,
|
|
itm
|
|
}
|
|
}
|
|
|
|
#[idle(resources=[eth_iface, itm])]
|
|
fn idle(c: idle::Context) -> ! {
|
|
let stim0 = &mut c.resources.itm.stim[0];
|
|
let iface = c.resources.eth_iface;
|
|
|
|
// Copied / modified from smoltcp:
|
|
// examples/loopback.rs
|
|
let echo_socket = {
|
|
static mut TCP_SERVER_RX_DATA: [u8; 1024] = [0; 1024];
|
|
static mut TCP_SERVER_TX_DATA: [u8; 1024] = [0; 1024];
|
|
let tcp_rx_buffer = TcpSocketBuffer::new(unsafe { &mut TCP_SERVER_RX_DATA[..] });
|
|
let tcp_tx_buffer = TcpSocketBuffer::new(unsafe { &mut TCP_SERVER_TX_DATA[..] });
|
|
TcpSocket::new(tcp_rx_buffer, tcp_tx_buffer)
|
|
};
|
|
let greet_socket = {
|
|
static mut TCP_SERVER_RX_DATA: [u8; 256] = [0; 256];
|
|
static mut TCP_SERVER_TX_DATA: [u8; 256] = [0; 256];
|
|
let tcp_rx_buffer = TcpSocketBuffer::new(unsafe { &mut TCP_SERVER_RX_DATA[..] });
|
|
let tcp_tx_buffer = TcpSocketBuffer::new(unsafe { &mut TCP_SERVER_TX_DATA[..] });
|
|
TcpSocket::new(tcp_rx_buffer, tcp_tx_buffer)
|
|
};
|
|
let mut socket_set_entries = [None, None];
|
|
let mut socket_set = SocketSet::new(&mut socket_set_entries[..]);
|
|
let echo_handle = socket_set.add(echo_socket);
|
|
let greet_handle = socket_set.add(greet_socket);
|
|
{
|
|
let store = unsafe { &mut NET_STORE };
|
|
iprintln!(stim0,
|
|
"TCP sockets will listen at {}", store.ip_addrs[0].address());
|
|
}
|
|
|
|
// Copied / modified from:
|
|
// smoltcp:examples/loopback.rs, examples/server.rs;
|
|
// stm32-eth:examples/ip.rs,
|
|
// git.m-labs.hk/M-Labs/tnetplug
|
|
loop {
|
|
// Poll
|
|
let now = timer_now().0;
|
|
let instant = Instant::from_millis(now as i64);
|
|
match iface.poll(&mut socket_set, instant) {
|
|
Ok(_) => {
|
|
},
|
|
Err(e) => {
|
|
iprintln!(stim0, "[{}] Poll error: {:?}", instant, e)
|
|
}
|
|
}
|
|
// Control the "echoing" socket (:1234)
|
|
{
|
|
let mut socket = socket_set.get::<TcpSocket>(echo_handle);
|
|
if !socket.is_open() {
|
|
iprintln!(stim0,
|
|
"[{}] Listening to port 1234 for echoing, time-out in 10s", instant);
|
|
socket.listen(1234).unwrap();
|
|
socket.set_timeout(Some(smoltcp::time::Duration::from_millis(10000)));
|
|
}
|
|
if socket.can_recv() {
|
|
iprintln!(stim0,
|
|
"[{}] Received packet: {:?}", instant, socket.recv(|buffer| {
|
|
(buffer.len(), str::from_utf8(buffer).unwrap())
|
|
}));
|
|
}
|
|
}
|
|
// Control the "greeting" socket (:4321)
|
|
{
|
|
let mut socket = socket_set.get::<TcpSocket>(greet_handle);
|
|
if !socket.is_open() {
|
|
iprintln!(stim0,
|
|
"[{}] Listening to port 4321 for greeting, \
|
|
please connect to the port", instant);
|
|
socket.listen(4321).unwrap();
|
|
}
|
|
|
|
if socket.can_send() {
|
|
let greeting = "Welcome to the server demo for STM32-F407!";
|
|
write!(socket, "{}\n", greeting).unwrap();
|
|
iprintln!(stim0,
|
|
"[{}] Greeting sent, socket closed", instant);
|
|
socket.close();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
extern "C" {
|
|
fn EXTI0();
|
|
}
|
|
};
|