#![no_std] #![no_main] extern crate panic_itm; use cortex_m::{iprint, iprintln}; use cortex_m_rt::entry; use embedded_hal::watchdog::{WatchdogEnable, Watchdog}; use embedded_hal::digital::v2::OutputPin; use embedded_hal::blocking::delay::DelayMs; use stm32f4xx_hal::{ rcc::RccExt, gpio::GpioExt, watchdog::IndependentWatchdog, time::U32Ext, stm32::{CorePeripherals, Peripherals}, delay::Delay, spi::Spi }; use enc424j600; use enc424j600::EthController; #[entry] fn main() -> ! { let mut cp = CorePeripherals::take().unwrap(); cp.SCB.enable_icache(); cp.SCB.enable_dcache(&mut cp.CPUID); let dp = Peripherals::take().unwrap(); let clocks = dp.RCC.constrain() .cfgr .sysclk(168.mhz()) .hclk(168.mhz()) .pclk1(32.mhz()) .pclk2(64.mhz()) .freeze(); let mut delay = Delay::new(cp.SYST, clocks); let mut itm = cp.ITM; let stim0 = &mut itm.stim[0]; iprintln!(stim0, "Eth TX Pinging on STM32-H407 via NIC100/ENC424J600"); // NIC100 / ENC424J600 Set-up let spi1 = dp.SPI1; let gpioa = dp.GPIOA.split(); // Mapping: see Table 9, STM32F407ZG Manual let spi1_sck = gpioa.pa5.into_alternate_af5(); let spi1_miso = gpioa.pa6.into_alternate_af5(); let spi1_mosi = gpioa.pa7.into_alternate_af5(); let spi1_nss = gpioa.pa4.into_push_pull_output(); // Map SPISEL: see Table 1, NIC100 Manual let mut spisel = gpioa.pa1.into_push_pull_output(); spisel.set_high().unwrap(); delay.delay_ms(1_u32); spisel.set_low().unwrap(); // Create SPI1 for HAL let spi_eth_port = Spi::spi1( spi1, (spi1_sck, spi1_miso, spi1_mosi), enc424j600::spi::SPI_MODE, enc424j600::spi::SPI_CLOCK.into(), clocks); let mut spi_eth = enc424j600::SpiEth::new(spi_eth_port, spi1_nss); // Init match spi_eth.init_dev() { Ok(_) => { iprintln!(stim0, "Ethernet initialised.") } Err(_) => { panic!("Ethernet initialisation Failed!") } } delay.delay_ms(1_u32); iprintln!(stim0, "- Delayed 1000us (>=256us), PHY regs are now available"); // Read MAC let mut eth_mac_addr: [u8; 6] = [0; 6]; spi_eth.read_from_mac(&mut eth_mac_addr); iprintln!(stim0, "MAC Address = {:02x}-{:02x}-{:02x}-{:02x}-{:02x}-{:02x}", eth_mac_addr[5], eth_mac_addr[4], eth_mac_addr[3], eth_mac_addr[2], eth_mac_addr[1], eth_mac_addr[0]); // Set to promiscuous mode spi_eth.set_promiscuous(); iprintln!(stim0, "Promiscuous Mode ON"); // Init Rx/Tx buffers spi_eth.init_rxbuf(); spi_eth.init_txbuf(); // Testing Eth TX let eth_tx_dat: [u8; 64] = [ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x08, 0x60, 0x6e, 0x44, 0x42, 0x95, 0x08, 0x06, 0x00, 0x01, 0x08, 0x00, 0x06, 0x04, 0x00, 0x01, 0x08, 0x60, 0x6e, 0x44, 0x42, 0x95, 0xc0, 0xa8, 0x01, 0x64, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xa8, 0x01, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x69, 0xd0, 0x85, 0x9f ]; loop { let mut eth_tx_packet = enc424j600::tx::TxPacket::new(); eth_tx_packet.update_frame(ð_tx_dat, 64); iprintln!(stim0, "Sending packet (len={:}): \ dest={:02x}-{:02x}-{:02x}-{:02x}-{:02x}-{:02x} \ src={:02x}-{:02x}-{:02x}-{:02x}-{:02x}-{:02x} \ data={:02x}{:02x}{:02x}{:02x} {:02x}{:02x}{:02x}{:02x} ...", eth_tx_packet.get_frame_length(), eth_tx_packet.get_frame_byte(0), eth_tx_packet.get_frame_byte(1), eth_tx_packet.get_frame_byte(2), eth_tx_packet.get_frame_byte(3), eth_tx_packet.get_frame_byte(4), eth_tx_packet.get_frame_byte(5), eth_tx_packet.get_frame_byte(6), eth_tx_packet.get_frame_byte(7), eth_tx_packet.get_frame_byte(8), eth_tx_packet.get_frame_byte(9), eth_tx_packet.get_frame_byte(10), eth_tx_packet.get_frame_byte(11), eth_tx_packet.get_frame_byte(12), eth_tx_packet.get_frame_byte(13), eth_tx_packet.get_frame_byte(14), eth_tx_packet.get_frame_byte(15), eth_tx_packet.get_frame_byte(16), eth_tx_packet.get_frame_byte(17), eth_tx_packet.get_frame_byte(18), eth_tx_packet.get_frame_byte(19) ); spi_eth.send_raw_packet(eth_tx_packet); iprintln!(stim0, "Packet sent"); delay.delay_ms(100_u32); } unreachable!() }