spi: Replace delay_ns func pointer with delay on cortex-m

* SPI NSS nanosecond delays now only takes place on Cortex-M CPUs

Cargo.toml

@@ -32,6 +32,7 @@ nal = [
     "embedded-time", "embedded-nal", "heapless",
     "smoltcp-phy", "smoltcp/socket-tcp", "smoltcp/ethernet"
 ]
+cortex-m-cpu = ["cortex-m"]
 # Example-based features
 smoltcp-examples = [
     "smoltcp-phy", "smoltcp/socket-tcp", "smoltcp/ethernet"

src/lib.rs

@@ -44,24 +44,28 @@ impl From<spi::Error> for Error {
 
 /// ENC424J600 controller in SPI mode
 pub struct Enc424j600<SPI: Transfer<u8>,
-                      NSS: OutputPin,
-                      F: FnMut(u32) -> ()> {
-    spi_port: spi::SpiPort<SPI, NSS, F>,
+                      NSS: OutputPin> {
+    spi_port: spi::SpiPort<SPI, NSS>,
     rx_buf: rx::RxBuffer,
-    tx_buf: tx::TxBuffer
+    tx_buf: tx::TxBuffer,
 }
 
 impl <SPI: Transfer<u8>,
-      NSS: OutputPin,
-      F: FnMut(u32) -> ()> Enc424j600<SPI, NSS, F> {
-    pub fn new(spi: SPI, nss: NSS, delay_ns: F) -> Self {
+      NSS: OutputPin> Enc424j600<SPI, NSS> {
+    pub fn new(spi: SPI, nss: NSS) -> Self {
         Enc424j600 {
-            spi_port: spi::SpiPort::new(spi, nss, delay_ns),
+            spi_port: spi::SpiPort::new(spi, nss),
             rx_buf: rx::RxBuffer::new(),
-            tx_buf: tx::TxBuffer::new()
+            tx_buf: tx::TxBuffer::new(),
         }
     }
 
+    #[cfg(feature = "cortex-m-cpu")]
+    pub fn cpu_freq_mhz(mut self, freq: u32) -> Self {
+        self.spi_port = self.spi_port.cpu_freq_mhz(freq);
+        self
+    }
+
     pub fn init(&mut self, delay: &mut impl DelayUs<u16>) -> Result<(), Error> {
         self.reset(delay)?;
         self.init_rxbuf()?;
@@ -145,8 +149,7 @@ impl <SPI: Transfer<u8>,
 }
 
 impl <SPI: Transfer<u8>,
-      NSS: OutputPin,
-      F: FnMut(u32) -> ()> EthPhy for Enc424j600<SPI, NSS, F> {
+      NSS: OutputPin> EthPhy for Enc424j600<SPI, NSS> {
     /// Receive the next packet and return it
     /// Set is_poll to true for returning until PKTIF is set;
     /// Set is_poll to false for returning Err when PKTIF is not set

src/spi.rs

@@ -62,11 +62,11 @@ pub mod addrs {
 /// Struct for SPI I/O interface on ENC424J600
 /// Note: stm32f4xx_hal::spi's pins include: SCK, MISO, MOSI
 pub struct SpiPort<SPI: Transfer<u8>,
-                   NSS: OutputPin,
-                   F: FnMut(u32) -> ()> {
+                   NSS: OutputPin> {
     spi: SPI,
     nss: NSS,
-    delay_ns: F,
+    #[cfg(feature = "cortex-m-cpu")]
+    cpu_freq_mhz: f32,
 }
 
 pub enum Error {
@@ -76,19 +76,25 @@ pub enum Error {
 
 #[allow(unused_must_use)]
 impl <SPI: Transfer<u8>,
-      NSS: OutputPin,
-      F: FnMut(u32) -> ()> SpiPort<SPI, NSS, F> {
+      NSS: OutputPin> SpiPort<SPI, NSS> {
     // TODO: return as Result()
-    pub fn new(spi: SPI, mut nss: NSS, delay_ns: F) -> Self {
+    pub fn new(spi: SPI, mut nss: NSS) -> Self {
         nss.set_high();
 
         SpiPort {
             spi,
             nss,
-            delay_ns,
+            #[cfg(feature = "cortex-m-cpu")]
+            cpu_freq_mhz: 0.,
         }
     }
 
+    #[cfg(feature = "cortex-m-cpu")]
+    pub fn cpu_freq_mhz(mut self, freq: u32) -> Self {
+        self.cpu_freq_mhz = freq as f32;
+        self
+    }
+
     pub fn read_reg_8b(&mut self, addr: u8) -> Result<u8, Error> {
         // Using RCRU instruction to read using unbanked (full) address
         let mut buf: [u8; 4] = [0; 4];
@@ -180,10 +186,6 @@ impl <SPI: Transfer<u8>,
         }
     }
 
-    pub fn delay_us(&mut self, duration: u32) {
-        (self.delay_ns)(duration * 1000)
-    }
-
     // TODO: Actual data should start from buf[0], not buf[1]
     // Completes an SPI transfer for reading data to the given buffer,
     // or writing data from the buffer.
@@ -195,10 +197,12 @@ impl <SPI: Transfer<u8>,
         assert!(buf.len() > data_length);
         // Enable chip select
         self.nss.set_low();
+        // >=50ns min. CS_n setup time
+        #[cfg(feature = "cortex-m-cpu")]
         match opcode {
             opcodes::RCRU | opcodes::WCRU |
             opcodes::RRXDATA | opcodes::WGPDATA => {
-                (self.delay_ns)(50);    // >=50ns min. CS_n setup time
+                cortex_m::asm::delay((0.05*(self.cpu_freq_mhz+1.)) as u32);
             }
             _ => { }
         }
@@ -209,9 +213,13 @@ impl <SPI: Transfer<u8>,
             opcodes::RCRU | opcodes::WCRU |
             opcodes::RRXDATA | opcodes::WGPDATA => {
                 // Disable chip select
-                (self.delay_ns)(50);    // >=50ns min. CS_n hold time
+                // >=50ns min. CS_n hold time
+                #[cfg(feature = "cortex-m-cpu")]
+                cortex_m::asm::delay((0.05*(self.cpu_freq_mhz+1.)) as u32);
                 self.nss.set_high();
-                (self.delay_ns)(20);    // >=20ns min. CS_n disable time
+                // >=20ns min. CS_n disable time
+                #[cfg(feature = "cortex-m-cpu")]
+                cortex_m::asm::delay((0.02*(self.cpu_freq_mhz+1.)) as u32);    
             }
             _ => { }
         }