ENC424J600/examples/tx_stm32f407.rs

161 lines
5.1 KiB
Rust
Raw Normal View History

2020-06-18 15:00:49 +08:00
#![no_std]
#![no_main]
extern crate panic_itm;
2020-12-29 11:08:35 +08:00
use cortex_m::{iprintln, iprint};
2020-06-18 15:00:49 +08:00
use embedded_hal::{
digital::v2::OutputPin,
blocking::delay::DelayMs
};
2020-06-18 15:00:49 +08:00
use stm32f4xx_hal::{
rcc::RccExt,
gpio::GpioExt,
time::U32Ext,
stm32::ITM,
2020-06-18 15:00:49 +08:00
delay::Delay,
spi::Spi,
time::Hertz
2020-06-18 15:00:49 +08:00
};
use enc424j600;
use enc424j600::EthController;
///
use stm32f4xx_hal::{
stm32::SPI1,
gpio::{
gpioa::{PA5, PA6, PA7, PA4},
Alternate, AF5, Output, PushPull
},
};
type BoosterSpiEth = enc424j600::SpiEth<
Spi<SPI1, (PA5<Alternate<AF5>>, PA6<Alternate<AF5>>, PA7<Alternate<AF5>>)>,
PA4<Output<PushPull>>>;
2020-06-18 15:00:49 +08:00
#[rtic::app(device = stm32f4xx_hal::stm32, peripherals = true, monotonic = rtic::cyccnt::CYCCNT)]
const APP: () = {
struct Resources {
spi_eth: BoosterSpiEth,
delay: Delay,
itm: ITM,
}
2020-06-18 15:00:49 +08:00
#[init()]
fn init(mut c: init::Context) -> init::LateResources {
c.core.SCB.enable_icache();
c.core.SCB.enable_dcache(&mut c.core.CPUID);
2020-06-18 15:00:49 +08:00
let clocks = c.device.RCC.constrain()
.cfgr
.sysclk(168.mhz())
.hclk(168.mhz())
//.pclk1(32.mhz())
.pclk1(42.mhz())
//.pclk2(64.mhz())
.require_pll48clk()
.freeze();
let mut delay = Delay::new(c.core.SYST, clocks);
2020-06-18 15:00:49 +08:00
// Init ITM
let mut itm = c.core.ITM;
let stim0 = &mut itm.stim[0];
iprintln!(stim0,
"Eth TX Pinging on STM32-F407 via NIC100/ENC424J600");
2020-06-18 15:00:49 +08:00
// NIC100 / ENC424J600 Set-up
let spi1 = c.device.SPI1;
let gpioa = c.device.GPIOA.split();
// Mapping: see Table 9, STM32F407ZG Manual
let spi1_sck = gpioa.pa5.into_alternate_af5();
let spi1_miso = gpioa.pa6.into_alternate_af5();
let spi1_mosi = gpioa.pa7.into_alternate_af5();
let spi1_nss = gpioa.pa4.into_push_pull_output();
// Map SPISEL: see Table 1, NIC100 Manual
let mut spisel = gpioa.pa1.into_push_pull_output();
spisel.set_high().unwrap();
delay.delay_ms(1_u32);
spisel.set_low().unwrap();
// Create SPI1 for HAL
let mut spi_eth = {
let spi_eth_port = Spi::spi1(
spi1, (spi1_sck, spi1_miso, spi1_mosi),
enc424j600::spi::interfaces::SPI_MODE,
Hertz(enc424j600::spi::interfaces::SPI_CLOCK_FREQ),
clocks);
enc424j600::SpiEth::new(spi_eth_port, spi1_nss)
2020-12-29 11:08:35 +08:00
};
2020-06-18 15:00:49 +08:00
// Init
match spi_eth.init_dev(&mut delay) {
Ok(_) => {
iprintln!(stim0, "Initializing Ethernet...")
}
Err(_) => {
panic!("Ethernet initialization failed!")
}
}
// Read MAC
let mut eth_mac_addr: [u8; 6] = [0; 6];
spi_eth.read_from_mac(&mut eth_mac_addr);
for i in 0..6 {
let byte = eth_mac_addr[i];
2020-12-29 11:08:35 +08:00
match i {
0 => iprint!(stim0, "MAC Address = {:02x}-", byte),
1..=4 => iprint!(stim0, "{:02x}-", byte),
5 => iprint!(stim0, "{:02x}\n", byte),
2020-12-29 11:08:35 +08:00
_ => ()
};
}
// Init Rx/Tx buffers
spi_eth.init_rxbuf();
spi_eth.init_txbuf();
iprintln!(stim0, "Ethernet controller initialized");
init::LateResources {
spi_eth,
delay,
itm,
}
2020-06-18 15:00:49 +08:00
}
#[idle(resources=[spi_eth, delay, itm])]
fn idle(c: idle::Context) -> ! {
let stim0 = &mut c.resources.itm.stim[0];
// Testing Eth TX
let eth_tx_dat: [u8; 64] = [
0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x08, 0x60,
0x6e, 0x44, 0x42, 0x95, 0x08, 0x06, 0x00, 0x01,
0x08, 0x00, 0x06, 0x04, 0x00, 0x01, 0x08, 0x60,
0x6e, 0x44, 0x42, 0x95, 0xc0, 0xa8, 0x01, 0x64,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xa8,
0x01, 0xe7, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x69, 0xd0, 0x85, 0x9f
];
loop {
let mut eth_tx_packet = enc424j600::tx::TxPacket::new();
eth_tx_packet.update_frame(&eth_tx_dat, 64);
iprint!(stim0,
"Sending packet (len={:}): ", eth_tx_packet.get_frame_length());
for i in 0..20 {
let byte = eth_tx_packet.get_frame_byte(i);
match i {
0 => iprint!(stim0, "dest={:02x}-", byte),
6 => iprint!(stim0, "src={:02x}-", byte),
12 => iprint!(stim0, "data={:02x}", byte),
1..=4 | 7..=10 => iprint!(stim0, "{:02x}-", byte),
13..=14 | 16..=18 => iprint!(stim0, "{:02x}", byte),
5 | 11 | 15 => iprint!(stim0, "{:02x} ", byte),
19 => iprint!(stim0, "{:02x} ...\n", byte),
_ => ()
};
}
c.resources.spi_eth.send_raw_packet(&eth_tx_packet);
iprintln!(stim0, "Packet sent");
c.resources.delay.delay_ms(100_u32);
}
}
};