0755757601
compiler/tb: use FPU
2021-11-08 16:59:08 +08:00
0d708cd61a
compiler/target: split RISCV target into float/non-float
2021-11-08 16:59:08 +08:00
03b803e764
firmware: adjust csr separation
2021-11-08 16:59:08 +08:00
b3e315e24a
rust: find json file using CARGO_TRIPLE
2021-11-08 16:59:08 +08:00
0898e101e2
board_misoc: reuse riscv dir for comm & kernel
2021-11-08 16:59:08 +08:00
cb247f235f
gateware: pass adr_w/data_w to submodules
2021-11-08 16:59:08 +08:00
90f944481c
kernel_cpu: add fpu if not kasli v1.x
2021-11-08 16:59:08 +08:00
d84ad0095b
comm_cpu: select 64b bus if not kasli v1.x
2021-11-08 16:59:08 +08:00
dd68b4ab82
mailbox: parametrize address width
2021-11-08 16:59:08 +08:00
c6e0e26440
drtio: accept 32b/64b bus
2021-11-08 16:59:08 +08:00
8da924ec0f
dma: set conversion granularity using bus width
2021-11-08 16:59:08 +08:00
591507a7c0
Merge pull request #1774 from m-labs/fastino-cic
...
Fastino cic
2021-10-28 17:44:20 +02:00
5a5b0cc7c0
fastino: expand docs
2021-10-28 15:19:48 +00:00
69cddc6b86
rtio_clocking: add warnings for unsupported rtio_clock settings ( #1773 )
2021-10-28 16:34:22 +08:00
9b1d7e297d
runtime: clock input specification improvements
...
closes #1735
2021-10-28 16:21:51 +08:00
1ff474893d
Revert "fastino: make driver filter order configurable"
...
This reverts commit 10c37b87ec
2021-10-28 06:29:56 +00:00
10c37b87ec
fastino: make driver filter order configurable
2021-10-27 20:24:58 +00:00
c940f104f1
artiq_flash: fix gateware header not in little-endian for RISC-V
2021-10-25 11:20:26 +08:00
0aa8a739aa
sayma_rtm: fix RTM firmware not in little-endian for RISC-V
2021-10-25 11:20:26 +08:00
d5fa3d131a
cargo.lock: update libc version for libfringe
2021-10-16 17:42:24 +08:00
6d3164a912
riscv: print mtval on panic
2021-10-16 17:42:24 +08:00
46326716fd
runtime: bump libfringe, impl ecall abi
...
See libfringe PR: M-Labs/libfringe#1
2021-10-16 17:42:24 +08:00
0a59c889de
satman/kern: init locked PMP on startup
2021-10-16 17:42:24 +08:00
27a7a96626
runtime: setup pmp + transfer to user
2021-10-16 17:42:24 +08:00
a0bf11b465
riscv: impl pmp
2021-10-16 17:42:24 +08:00
790a20edf6
linker: generate stack guard + symbol
2021-10-16 17:42:24 +08:00
fanmingyu212
178a86bcda
master: add an argument to set an experiment subdirectory
...
Signed-off-by: Mingyu Fan <mingyufan@ucsb.edu>
2021-10-15 16:54:31 +08:00
35d21c98d3
Revert "runtime: expose rint from libm"
...
Consistency with NAR3/Zynq where rint is not available.
This reverts commit f5100702f6
2021-10-11 08:12:04 +08:00
f5100702f6
runtime: expose rint from libm
2021-10-10 20:40:17 +08:00
3c1cbf47d2
phaser: add more slack during init. Closes #1757
2021-10-10 16:18:55 +08:00
3f6bf33298
fastino: add interpolator support
2021-10-08 15:47:07 +00:00
59065c4663
alloc_list: support alloc w/ large align
...
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
2021-10-07 12:38:03 +08:00
1894f0f626
gateware: share RTIOClockMultiplier and fix_serdes_timing_path ( #1760 )
2021-10-07 08:19:38 +08:00
a8333053c9
sinara_tester: add device_db and test selection CLI options
...
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-27 17:44:50 +08:00
3ed10221d8
compiler: remove big-endian support. Closes #1590
2021-09-13 13:40:24 +08:00
e8a7a8f41e
compiler: work around idiotic windoze behavior that causes conda ld.lld not to be found
2021-09-13 10:40:54 +08:00
ffb1e3ec2d
wavesynth: np.int is deprecated
2021-09-13 07:02:35 +08:00
2d79d824f9
firmware: remove minor or1k leftovers
2021-09-12 20:03:37 +08:00
a573dcf3f9
board_misoc/build: use rv32 as target arg
...
The original rv64 argument was only to match the misoc counterpart.
2021-09-10 14:11:23 +08:00
448974fe11
runtime/main: cleanup
2021-09-10 13:59:53 +08:00
b091d8cb66
kernel: flush cache before mod_init
...
This could be necessary as redirecting instructions from D$ directly to I$ as it seems.
Related: https://github.com/SpinalHDL/VexRiscv/issues/137
2021-09-10 13:25:12 +08:00
5394d04669
test_spi: add delay
2021-09-10 13:25:12 +08:00
b8ed5a0d91
alloc: fix alignment for riscv32 arch
2021-09-10 13:25:12 +08:00
2213e7ffac
ksupp/rtio/exception: fix timestamp
2021-09-10 13:25:12 +08:00
09ffd9de1e
dma: fix timestamp fetch
2021-09-10 13:25:12 +08:00
051a14abf2
rtio/dma: fix endianness
2021-09-10 13:25:12 +08:00
c6ba0f3cf4
ksupport: fix dma cslice (ffi)
2021-09-10 13:25:12 +08:00
c812a837ab
runtime: enlarge stack size
2021-09-10 13:25:12 +08:00
a596db404d
satman: fix cargo xbuild sysroot
2021-09-10 13:25:12 +08:00
4fab267593
cargo: std dependency hack
2021-09-10 13:25:12 +08:00
dcbd9f905c
cargo: use cargo xbuild
2021-09-10 13:25:12 +08:00
9f6b3f6014
firmware: clarify target triple
...
The lack of compressed instruction support can be inferred from the target triple, literally.
2021-09-10 13:25:12 +08:00
4619a33db4
test: remove broken array return tests
...
Removed test cases that do not respect lifetime/scope constraint.
See discussion in artiq-zynq repo: M-Labs/artiq-zynq#119
Referred to the patch from @dnadlinger. 5faa30a837
2021-09-10 13:25:12 +08:00
5985f7efb5
syscall: lower nowrite to inaccessiblememonly
...
In the origin implementation, the `nowrite` flag literally means not writing memory at all.
Due to the usage of flags on certain functions, it results in the same issues found in artiq-zynq after optimization passes. (M-Labs/artiq-zynq#119 )
A fix wrote by @dnadlinger can resolve this issue. (c1e46cc7c8
2021-09-10 13:25:12 +08:00
6db7280b09
flake: board package WIP
2021-09-10 13:25:12 +08:00
d8ac429059
dyld: streamline lib.rs
...
Only riscv32 is supported anyway, no need to have excessive architecture check.
2021-09-10 13:25:12 +08:00
798774192d
slave_fpga/bootloader: read in little endian
2021-09-10 13:25:12 +08:00
eecd825d23
firmware: suppress warning
2021-09-10 13:25:12 +08:00
1da0554a49
pcr: purge
2021-09-10 13:25:12 +08:00
5d0a8cf9ac
llvm_ir_gen: fix indent
2021-09-10 13:25:12 +08:00
70507e1b72
Cargo.lock: update
2021-09-10 13:25:12 +08:00
c113cd6bf5
libfringe: bump
2021-09-10 13:25:12 +08:00
61b0170a12
firmware: purge or1k
2021-09-10 13:25:12 +08:00
af263ffe1f
ksupport: fix rpc, cache signature (FFI)
...
The reason of the borrow stuff is explained in M-Labs/artiq-zynq#76 (artiq-zyna repo).
As for `cache_get()`, compiler will perform stack allocation to pre-allocate the returned structure, and pass to cache_get alongside the `key`.
However, ksupport fails to recognize the passed memory, so it will always assume the passed memory as the key.
2021-09-10 13:25:12 +08:00
a833974b50
analyzer: fix endianness
2021-09-10 13:25:12 +08:00
d623acc29d
llvm_ir_gen: fix now with now_pinning & little-endian target
2021-09-10 13:25:12 +08:00
8fa47b8119
rpc: enforce alignment
2021-09-10 13:25:12 +08:00
de0f2d4a28
firmware: adopt endianness protocol in artiq-zynq
...
Related:
artiq-zynq: M-Labs/artiq-zynq#126
artiq: #1588
2021-09-10 13:25:12 +08:00
9afe63c08a
ksupport: fix proto_artiq dependency
2021-09-10 13:25:12 +08:00
29a2f106d1
ksupport: replace asm with llvm_asm
2021-09-10 13:25:12 +08:00
b30ed75e69
kernel.ld: load elf header and prog headers
...
ld.lld has a habit of not putting the headers under any load sections.
However, the headers are needed by libunwind to handle exception raised by the kernel.
Creating PT_LOAD section with FILEHDR and PHDRS solves this issue. Other PHDRS are also specified as linkers (not limited to ld.lld) will not create additional unspecified headers even when necessary.
2021-09-10 13:25:12 +08:00
279593f984
ksupport.ld: merge sbss with bss
2021-09-10 13:25:12 +08:00
1ba8c8dfee
runtime: remove irq again
2021-09-10 13:25:12 +08:00
3d629006df
makefiles: revert byte-swaps
2021-09-10 13:25:12 +08:00
7542105f0f
board_misoc: remove pcr
...
VexRiscv seems to not support additional hardware performance counter, at least I have not seen any documentation on how to use it.
2021-09-10 13:25:12 +08:00
01ca114c66
runtime: remove irq dependency
2021-09-10 13:25:12 +08:00
36171f2c61
runtime: remove inaccurate sp on panic
2021-09-10 13:25:12 +08:00
01e357e5d3
ksupport.ld: reduce load section alignment
2021-09-10 13:25:12 +08:00
f77b607b56
compiler: generate symbols
2021-09-10 13:25:12 +08:00
1293e0750e
ld, makefiles: use ld.lld
2021-09-10 13:25:12 +08:00
fc42d053d9
kernel: use vexriscv
2021-09-10 13:25:12 +08:00
1b516b16e2
targets: default to vexriscv cpu
2021-09-10 13:25:12 +08:00
e8fe8409b2
libartiq_support: compatibility with recent stable rustc
2021-09-10 13:25:12 +08:00
cabe5ace8e
compiler: remove DebugInfoEmitter for now
...
Causes problems with LLVM 9 and not needed at first.
2021-09-10 13:25:12 +08:00
6629a49e86
compiler: use LLVM binutils/linker for Arm as well
...
Previously we kept GNU Binutils because they are less of a pain to support
on Windoze - the source of so many problems - but with RISC-V we need to
update LLVM anyway.
2021-09-10 13:25:12 +08:00
43d120359d
compiler: switch to upstream llvmlite and RISC-V target
2021-09-10 13:25:12 +08:00
5656e52581
remove profiler
2021-09-10 13:25:12 +08:00
1b8b4baf6a
ksupport: fix panic, libc, unwind
2021-09-10 13:25:12 +08:00
905330b0f1
ksupport: handle riscv exceptions
2021-09-10 13:25:12 +08:00
50a62b3d42
liballoc: change align to 16 bytes
2021-09-10 13:25:12 +08:00
7f0bc9f7f0
runtime/makefile: specify emulation, flip endianness
2021-09-10 13:25:12 +08:00
c42adfe6fd
runtime.ld: merge .sbss & .bss
2021-09-10 13:25:12 +08:00
f56152e72f
rust: fix dependencies
2021-09-10 13:25:12 +08:00
c800b6c8d3
runtime: update rust alloc, managed
2021-09-10 13:25:09 +08:00
e99061b013
runtime: add riscv
2021-09-10 13:23:22 +08:00
ecedec577c
runtime: impl riscv exception handling
2021-09-10 13:23:15 +08:00
252594a606
runtime: impl riscv panic handler
2021-09-10 13:20:31 +08:00
31bf17563c
personality: update from rust/panic_unwind
2021-09-10 13:20:31 +08:00
bfddd8a30f
libdyld: add riscv support
2021-09-10 13:20:31 +08:00
ad3037d0f6
libc: add minimal C types
2021-09-10 13:20:31 +08:00
daaf6c3401
libunwind: add rust interface
2021-09-10 13:20:31 +08:00
6d9cebfd42
satman: handle .sbss generation
2021-09-10 13:20:31 +08:00
96438c9da7
satman: make fbi big-endian
2021-09-10 13:20:31 +08:00
6535b2f089
satman: fix feature
2021-09-10 13:20:31 +08:00
45adaa1d98
satman: add riscv exception handling
2021-09-10 13:20:31 +08:00
869a282410
satman: use riscv
2021-09-10 13:20:31 +08:00
ebb9f298b5
proto_artiq: update alloc type path
2021-09-10 13:20:31 +08:00
97a0132f15
libio: update alloc type path
2021-09-10 13:20:31 +08:00
37ea863004
libio: pin failure version
2021-09-10 13:20:31 +08:00
3ff74e0693
bootloader: handle .sbss generation in .ld
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
448fe0e8cf
bootloader: fix panic
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
8294d7fea5
bootloader: swap endianness
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
13032272fd
bootloader: add rv32 exception handler
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
46102ee737
board_misoc: build vectors.S with rv64 target in misoc
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
b87ea79d51
rv32: rm irq & vexriscv-rust
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
9aee42f0f2
rv32/boot: remove hotswap
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
82b4052cd6
libboard_misoc: vexriscv integration
...
Signed-off-by: occheung <dc@m-labs.hk>
2021-09-10 13:20:31 +08:00
Leon Riesebos
2cf144a60c
ddb_template: edge counter keys correspond with according ttl keys
...
previously ttl_counter_0 and ttl_0 could be on completely different physical ttl output channels
with this change, ttl_0_counter (note the changed key format) is always on the same channel as ttl_0
Signed-off-by: Leon Riesebos <leon.riesebos@duke.edu>
2021-09-06 09:06:04 +08:00
4d7bd3ee32
phaser: fail init() if frame timestamp measurement times out
...
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-03 12:01:26 +02:00
075cb26dd7
phaser: rename get_next_frame_timestamp() to get_next_frame_mu()
...
and implement review comments (PR #1749 )
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-03 09:58:01 +02:00
7aebf02f84
phaser: docs: add reference to get_next_frame_timestamps(), fix typo
...
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-01 17:44:46 +02:00
61b44d40dd
phaser: add labels to debug init prints
...
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-01 17:43:30 +02:00
65f8a97b56
phaser: add helpers to align updates to the RTIO timeline
...
Signed-off-by: Etienne Wodey <etienne.wodey@aqt.eu>
2021-09-01 17:42:54 +02:00
SingularitySurfer
65f63e6927
fix suservo start
2021-08-19 07:38:48 +00:00
a53162d01d
tester: tweak suservo
...
* p gain 1 to get reasonable power
* refine testing instructions and comments
2021-08-19 09:17:14 +02:00
SingularitySurfer
4d21a72407
Implement SUServo tester.
2021-08-18 15:10:27 +00:00
Mikołaj Sowiński
898122f3e5
Added support for HVAMP_8CH ( #1741 )
2021-08-16 13:39:00 +08:00
420891ba54
syntax
2021-08-12 13:01:35 +08:00
9f94bc61ae
missing part of 477b1516d
2021-08-12 12:55:37 +08:00
c69a1316ad
compiler: stop using sys.version_info for parser
2021-08-12 12:52:24 +08:00
477b1516d3
remove profiler
2021-08-12 12:51:55 +08:00
67847f98f4
artiq_run: fix multiarch
2021-08-12 12:48:10 +08:00
7879d3630b
made kc705/gtx interface more similar to kasli/gtp
2021-08-10 18:53:52 +08:00
242dfae38e
kc705: fix DRTIO targets
2021-08-06 15:41:47 +08:00
5111132ef0
ICAP: prevent sayma from using it ( #1740 )
2021-08-06 15:08:30 +08:00
dc546630e4
kc705: DRTIO variants WIP
2021-08-06 14:41:41 +08:00
fd824f7ad0
ddb_template: print LED channel nos on Kasli v2
2021-08-05 17:29:38 +02:00
c9608c0a89
zotino: default div_read unified with ad53xx at 16, fix ad53xx doc
2021-08-05 17:42:11 +08:00
6b88ea563d
talk to ICAP primitive to restart gateware ( #1733 )
2021-08-05 17:00:31 +08:00
97e994700b
compiler: turn __repr__ into __str__ when sphinx is used. Closes #741
2021-08-05 11:32:20 +08:00
c3d765f745
ad9910: fix type annotations
2021-08-05 11:30:54 +08:00
53a98acfe4
artiq_flash: cleanup openocd handling, do not follow symlinks
...
Not following symlinks allows files to be added to OpenOCD via nixpkgs buildEnv.
2021-07-26 17:01:24 +08:00
30e5e06a33
moninj: fix read of incomplete data ( #1729 )
2021-07-22 17:56:38 +08:00
ebb67eaeee
applets: add length warning message on plot for plot_xy_hist and fix bug ( #1725 )
2021-07-19 15:45:48 +08:00
943a95e07a
applets: add data length warning message for plot_xy ( #1722 )
2021-07-19 15:14:15 +08:00
e996b5f635
applets: fix warning timing
2021-07-19 12:26:01 +08:00
4fb8ea5b73
artiq_flash: determine which firmware to flash by looking at filesystem
...
Closes #1719
2021-07-14 16:43:00 +08:00
5cd721c514
applets: add plot_hist dataset length mismatch warning ( #1718 )
2021-07-14 15:57:55 +08:00
Star Chen
6ce9c26402
GUI: add option to create new datasets ( #1716 )
2021-07-13 12:53:35 +08:00
2204fd2b22
adf5356: add delay to sync()
...
Signed-off-by: Oi Chee Cheung <dc@m-labs.hk>
2021-07-08 10:03:20 +08:00
