Browse Source

gateware: add DRTIO

Reviewed-on: M-Labs/artiq-zynq#140
Co-authored-by: mwojcik <mw@m-labs.hk>
Co-committed-by: mwojcik <mw@m-labs.hk>
exception
mwojcik 1 year ago committed by sb10q
parent
commit
ab0c205dd2
  1. 85
      src/gateware/drtio_aux_controller.py
  2. 297
      src/gateware/kasli_soc.py
  3. 404
      src/gateware/zc706.py

85
src/gateware/drtio_aux_controller.py

@ -0,0 +1,85 @@
"""Auxiliary controller, common to satellite and master"""
from artiq.gateware.drtio.aux_controller import Transmitter, Receiver
from migen.fhdl.simplify import FullMemoryWE
from misoc.interconnect.csr import *
from migen_axi.interconnect.sram import SRAM
from migen_axi.interconnect import axi
max_packet = 1024
class _DRTIOAuxControllerBase(Module):
def __init__(self, link_layer):
self.bus = axi.Interface()
self.submodules.transmitter = Transmitter(link_layer, len(self.bus.w.data))
self.submodules.receiver = Receiver(link_layer, len(self.bus.w.data))
def get_csrs(self):
return self.transmitter.get_csrs() + self.receiver.get_csrs()
# TODO: FullMemoryWE should be applied by migen.build
@FullMemoryWE()
class DRTIOAuxControllerAxi(_DRTIOAuxControllerBase):
def __init__(self, link_layer):
_DRTIOAuxControllerBase.__init__(self, link_layer)
tx_sdram_if = SRAM(self.transmitter.mem, read_only=False)
rx_sdram_if = SRAM(self.receiver.mem, read_only=True)
aw_decoder = axi.AddressDecoder(self.bus.aw,
[(lambda a: a[log2_int(max_packet)] == 0, tx_sdram_if.bus.aw),
(lambda a: a[log2_int(max_packet)] == 1, rx_sdram_if.bus.aw)],
register=True)
ar_decoder = axi.AddressDecoder(self.bus.ar,
[(lambda a: a[log2_int(max_packet)] == 0, tx_sdram_if.bus.ar),
(lambda a: a[log2_int(max_packet)] == 1, rx_sdram_if.bus.ar)],
register=True)
# unlike wb, axi address decoder only connects ar/aw lanes,
# the rest must also be connected!
# not quite unlike an address decoder itself.
# connect bus.b with tx.b
self.comb += [tx_sdram_if.bus.b.ready.eq(self.bus.b.ready),
self.bus.b.id.eq(tx_sdram_if.bus.b.id),
self.bus.b.resp.eq(tx_sdram_if.bus.b.resp),
self.bus.b.valid.eq(tx_sdram_if.bus.b.valid)]
# connect bus.w with tx.w
# no worries about w.valid and slave sel here, only tx will be written to
self.comb += [tx_sdram_if.bus.w.id.eq(self.bus.w.id),
tx_sdram_if.bus.w.data.eq(self.bus.w.data),
tx_sdram_if.bus.w.strb.eq(self.bus.w.strb),
tx_sdram_if.bus.w.last.eq(self.bus.w.last),
tx_sdram_if.bus.w.valid.eq(self.bus.w.valid),
self.bus.w.ready.eq(tx_sdram_if.bus.w.ready)]
# connect bus.r with rx.r and tx.r w/o data
self.comb += [self.bus.r.id.eq(rx_sdram_if.bus.r.id | tx_sdram_if.bus.r.id),
#self.bus.r.data.eq(rx_sdram_if.bus.r.data | tx_sdram_if.bus.r.data),
self.bus.r.resp.eq(rx_sdram_if.bus.r.resp | tx_sdram_if.bus.r.resp),
self.bus.r.last.eq(rx_sdram_if.bus.r.last | tx_sdram_if.bus.r.last),
self.bus.r.valid.eq(rx_sdram_if.bus.r.valid | tx_sdram_if.bus.r.valid),
rx_sdram_if.bus.r.ready.eq(self.bus.r.ready),
tx_sdram_if.bus.r.ready.eq(self.bus.r.ready)]
# connect read data after being masked
masked = [Replicate(rx_sdram_if.bus.r.valid,
len(self.bus.r.data)
) & rx_sdram_if.bus.r.data,
Replicate(tx_sdram_if.bus.r.valid,
len(self.bus.r.data)
) & tx_sdram_if.bus.r.data]
self.comb += self.bus.r.data.eq(reduce(or_, masked))
self.submodules += tx_sdram_if, rx_sdram_if, aw_decoder, ar_decoder
@FullMemoryWE()
class DRTIOAuxControllerBare(_DRTIOAuxControllerBase):
# Barebones version of the AuxController. No SRAM, no decoders.
# add memories manually from tx and rx in target code.
def get_tx_port(self):
return self.transmitter.mem.get_port(write_capable=True)
def get_rx_port(self):
return self.receiver.mem.get_port(write_capable=False)
def get_mem_size(self):
return max_packet

297
src/gateware/kasli_soc.py

@ -15,11 +15,16 @@ from misoc.integration import cpu_interface
from artiq.coredevice import jsondesc
from artiq.gateware import rtio, eem_7series
from artiq.gateware.rtio.phy import ttl_simple
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier
from artiq.gateware.drtio.transceiver import gtx_7series
from artiq.gateware.drtio.siphaser import SiPhaser7Series
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
from artiq.gateware.drtio import *
import dma
import analyzer
import acpki
import drtio_aux_controller
class RTIOCRG(Module, AutoCSR):
def __init__(self, platform):
@ -70,7 +75,7 @@ class RTIOCRG(Module, AutoCSR):
MultiReg(pll_locked, self.pll_locked.status)
]
eem_iostandard_dict = {
0: "LVDS_25",
1: "LVDS_25",
@ -173,13 +178,289 @@ class GenericStandalone(SoCCore):
class GenericMaster(SoCCore):
def __init__(self, description, **kwargs):
raise NotImplementedError
def __init__(self, description, acpki=False):
sys_clk_freq = 125e6
rtio_clk_freq = 125e6
self.acpki = acpki
self.rustc_cfg = dict()
platform = kasli_soc.Platform()
platform.toolchain.bitstream_commands.extend([
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
])
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
# kasli_soc has no SATA, but it has 4x SFP
# not sure yet why sfp0 is omitted in MasterMode
data_pads = [platform.request("sfp", i) for i in range(4)]
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("clk125_gtp"),
pads=data_pads,
sys_clk_freq=sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
self.csr_devices.append("rtio_crg")
self.rtio_channels = []
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
if has_grabber:
self.grabber_csr_group = []
eem_7series.add_peripherals(self, description["peripherals"], iostandard=eem_iostandard)
for i in (0, 1):
print("USER LED at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
user_led = self.platform.request("user_led", i)
phy = ttl_simple.Output(user_led)
self.submodules += phy
self.rtio_channels.append(rtio.Channel.from_phy(phy))
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
self.rtio_channels.append(rtio.LogChannel())
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
drtio_csr_group = []
drtioaux_csr_group = []
drtioaux_memory_group = []
self.drtio_cri = []
for i in range(len(self.drtio_transceiver.channels)):
core_name = "drtio" + str(i)
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtio_csr_group.append(core_name)
drtioaux_csr_group.append(coreaux_name)
drtioaux_memory_group.append(memory_name)
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
core = cdr(DRTIOMaster(self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, core_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(core_name)
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
setattr(self.submodules, coreaux_name, coreaux)
self.csr_devices.append(coreaux_name)
size = coreaux.get_mem_size()
memory_address = self.axi2csr.register_port(coreaux.get_tx_port(), size)
self.axi2csr.register_port(coreaux.get_rx_port(), size)
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, size * 2)
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtio", drtio_csr_group)
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, self.rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio_dma")
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.rtio.cri, self.rtio_dma.cri],
[self.rtio_core.cri] + self.drtio_cri,
enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
self.csr_devices.append("rtio_moninj")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
if has_grabber:
self.rustc_cfg["has_grabber"] = None
self.add_csr_group("grabber", self.grabber_csr_group)
class GenericSatellite(SoCCore):
def __init__(self, description, **kwargs):
raise NotImplementedError
def __init__(self, description, acpki=False):
sys_clk_freq = 125e6
rtio_clk_freq = 125e6
self.acpki = acpki
self.rustc_cfg = dict()
platform = kasli_soc.Platform()
platform.toolchain.bitstream_commands.extend([
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
])
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.crg = self.ps7 # HACK for eem_7series to find the clock
self.submodules.rtio_crg = RTIOClockMultiplier(rtio_clk_freq)
self.csr_devices.append("rtio_crg")
data_pads = [platform.request("sfp", i) for i in range(4)]
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("clk125_gtp"),
pads=data_pads,
sys_clk_freq=sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.rtio_channels = []
has_grabber = any(peripheral["type"] == "grabber" for peripheral in description["peripherals"])
if has_grabber:
self.grabber_csr_group = []
eem_7series.add_peripherals(self, description["peripherals"], iostandard=eem_iostandard)
for i in (0, 1):
print("USER LED at RTIO channel 0x{:06x}".format(len(self.rtio_channels)))
user_led = self.platform.request("user_led", i)
phy = ttl_simple.Output(user_led)
self.submodules += phy
self.rtio_channels.append(rtio.Channel.from_phy(phy))
self.config["RTIO_LOG_CHANNEL"] = len(self.rtio_channels)
self.rtio_channels.append(rtio.LogChannel())
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
drtioaux_csr_group = []
drtioaux_memory_group = []
drtiorep_csr_group = []
self.drtio_cri = []
for i in range(len(self.drtio_transceiver.channels)):
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtioaux_csr_group.append(coreaux_name)
drtioaux_memory_group.append(memory_name)
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
if i == 0:
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
core = cdr(DRTIOSatellite(
self.rtio_tsc, self.drtio_transceiver.channels[i],
self.rx_synchronizer))
self.submodules.drtiosat = core
self.csr_devices.append("drtiosat")
else:
corerep_name = "drtiorep" + str(i-1)
drtiorep_csr_group.append(corerep_name)
core = cdr(DRTIORepeater(
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, corerep_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(corerep_name)
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
setattr(self.submodules, coreaux_name, coreaux)
self.csr_devices.append(coreaux_name)
mem_size = coreaux.get_mem_size()
tx_port = coreaux.get_tx_port()
rx_port = coreaux.get_rx_port()
memory_address = self.axi2csr.register_port(tx_port, mem_size)
# rcv in upper half of the memory, thus added second
self.axi2csr.register_port(rx_port, mem_size)
# and registered in PS interface
# manually, because software refers to rx/tx by halves of entire memory block, not names
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.add_csr_group("drtiorep", drtiorep_csr_group)
if self.acpki:
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio_dma")
self.submodules.local_io = SyncRTIO(self.rtio_tsc, self.rtio_channels)
self.comb += self.drtiosat.async_errors.eq(self.local_io.async_errors)
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.drtiosat.cri],
[self.local_io.cri] + self.drtio_cri,
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
self.submodules.rtio_moninj = rtio.MonInj(self.rtio_channels)
self.csr_devices.append("rtio_moninj")
rtio_clk_period = 1e9/rtio_clk_freq
self.rustc_cfg["rtio_frequency"] = str(rtio_clk_freq/1e6)
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("cdr_clk"),
rx_synchronizer=self.rx_synchronizer,
ultrascale=False,
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
platform.add_false_path_constraints(
self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["has_siphaser"] = None
self.rustc_cfg["si5324_soft_reset"] = None
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.crg.cd_sys.clk, gtx.rxoutclk)
if has_grabber:
self.rustc_cfg["has_grabber"] = None
self.add_csr_group("grabber", self.grabber_csr_group)
# no RTIO CRG here
def write_mem_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_mem_rust(
soc.get_memory_regions(), soc.get_memory_groups(), None))
def write_csr_file(soc, filename):
@ -204,6 +485,8 @@ def main():
help="build Rust interface into the specified file")
parser.add_argument("-c", default=None,
help="build Rust compiler configuration into the specified file")
parser.add_argument("-m", default=None,
help="build Rust memory interface into the specified file")
parser.add_argument("-g", default=None,
help="build gateware into the specified directory")
parser.add_argument("--acpki", default=False, action="store_true",
@ -230,6 +513,8 @@ def main():
if args.r is not None:
write_csr_file(soc, args.r)
if args.m is not None:
write_mem_file(soc, args.m)
if args.c is not None:
write_rustc_cfg_file(soc, args.c)
if args.g is not None:

404
src/gateware/zc706.py

@ -11,13 +11,20 @@ from migen_axi.integration.soc_core import SoCCore
from migen_axi.platforms import zc706
from misoc.interconnect.csr import *
from misoc.integration import cpu_interface
from misoc.cores import gpio
from artiq.gateware import rtio, nist_clock, nist_qc2
from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series, dds, spi2
from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier, fix_serdes_timing_path
from artiq.gateware.drtio.transceiver import gtx_7series
from artiq.gateware.drtio.siphaser import SiPhaser7Series
from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
from artiq.gateware.drtio import *
import dma
import analyzer
import acpki
import drtio_aux_controller
class RTIOCRG(Module, AutoCSR):
@ -64,23 +71,45 @@ class RTIOCRG(Module, AutoCSR):
]
# The NIST backplanes require setting VADJ to 3.3V by reprogramming the power supply.
# This also changes the I/O standard for some on-board LEDs.
leds_fmc33 = [
("user_led_33", 0, Pins("Y21"), IOStandard("LVCMOS33")),
("user_led_33", 1, Pins("G2"), IOStandard("LVCMOS15")),
("user_led_33", 2, Pins("W21"), IOStandard("LVCMOS33")),
("user_led_33", 3, Pins("A17"), IOStandard("LVCMOS15")),
]
# same deal as with LEDs - changed I/O standard.
si5324_fmc33 = [
("si5324_33", 0,
Subsignal("rst_n", Pins("W23"), IOStandard("LVCMOS33")),
Subsignal("int", Pins("AJ25"), IOStandard("LVCMOS33"))
),
]
def prepare_zc706_platform(platform):
platform.toolchain.bitstream_commands.extend([
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
])
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
class ZC706(SoCCore):
def __init__(self, acpki=False):
self.acpki = acpki
self.rustc_cfg = dict()
platform = zc706.Platform()
platform.toolchain.bitstream_commands.extend([
"set_property BITSTREAM.GENERAL.COMPRESS True [current_design]",
])
prepare_zc706_platform(platform)
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_platform_command("create_clock -name clk_fpga_0 -period 8 [get_pins \"PS7/FCLKCLK[0]\"]")
platform.add_platform_command("set_input_jitter clk_fpga_0 0.24")
self.submodules.rtio_crg = RTIOCRG(self.platform, self.ps7.cd_sys.clk)
self.csr_devices.append("rtio_crg")
self.rustc_cfg["has_rtio_crg_clock_sel"] = None
@ -122,10 +151,284 @@ class ZC706(SoCCore):
self.csr_devices.append("rtio_analyzer")
class Simple(ZC706):
def __init__(self, **kwargs):
ZC706.__init__(self, **kwargs)
class _MasterBase(SoCCore):
def __init__(self, acpki=False):
self.acpki = acpki
self.rustc_cfg = dict()
platform = zc706.Platform()
prepare_zc706_platform(platform)
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_extension(si5324_fmc33)
self.sys_clk_freq = 125e6
platform = self.platform
self.comb += platform.request("sfp_tx_disable_n").eq(1)
data_pads = [
platform.request("sfp"),
platform.request("user_sma_mgt")
]
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("si5324_clkout"),
pads=data_pads,
sys_clk_freq=self.sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
drtio_csr_group = []
drtioaux_csr_group = []
drtioaux_memory_group = []
self.drtio_cri = []
for i in range(len(self.drtio_transceiver.channels)):
core_name = "drtio" + str(i)
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtio_csr_group.append(core_name)
drtioaux_csr_group.append(coreaux_name)
drtioaux_memory_group.append(memory_name)
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
core = cdr(DRTIOMaster(
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, core_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(core_name)
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
setattr(self.submodules, coreaux_name, coreaux)
self.csr_devices.append(coreaux_name)
mem_size = coreaux.get_mem_size()
memory_address = self.axi2csr.register_port(coreaux.get_tx_port(), mem_size)
self.axi2csr.register_port(coreaux.get_rx_port(), mem_size)
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtio", drtio_csr_group)
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.rustc_cfg["RTIO_FREQUENCY"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
self.csr_devices.append("si5324_rst_n")
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["si5324_as_synthesizer"] = None
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
# Constrain TX & RX timing for the first transceiver channel
# (First channel acts as master for phase alignment for all channels' TX)
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
# Constrain RX timing for the each transceiver channel
# (Each channel performs single-lane phase alignment for RX)
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk, gtx0.txoutclk, gtx.rxoutclk)
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
self.csr_devices.append("rtio_crg")
fix_serdes_timing_path(self.platform)
def add_rtio(self, rtio_channels):
self.submodules.rtio_tsc = rtio.TSC("async", glbl_fine_ts_width=3)
self.submodules.rtio_core = rtio.Core(self.rtio_tsc, rtio_channels)
self.csr_devices.append("rtio_core")
if self.acpki:
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
self.submodules.rtio_dma = dma.DMA(self.ps7.s_axi_hp0)
self.csr_devices.append("rtio_dma")
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.rtio.cri, self.rtio_dma.cri],
[self.local_io.cri] + self.drtio_cri,
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
self.submodules.rtio_analyzer = analyzer.Analyzer(self.rtio_tsc, self.rtio_core.cri,
self.ps7.s_axi_hp1)
self.csr_devices.append("rtio_analyzer")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
class _SatelliteBase(SoCCore):
def __init__(self, acpki=False):
self.acpki = acpki
self.rustc_cfg = dict()
platform = zc706.Platform()
prepare_zc706_platform(platform)
ident = self.__class__.__name__
if self.acpki:
ident = "acpki_" + ident
SoCCore.__init__(self, platform=platform, csr_data_width=32, ident=ident)
platform.add_extension(si5324_fmc33)
self.sys_clk_freq = 125e6
platform = self.platform
# SFP
self.comb += platform.request("sfp_tx_disable_n").eq(0)
data_pads = [
platform.request("sfp"),
platform.request("user_sma_mgt")
]
self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
# 1000BASE_BX10 Ethernet compatible, 125MHz RTIO clock
self.submodules.drtio_transceiver = gtx_7series.GTX(
clock_pads=platform.request("si5324_clkout"),
pads=data_pads,
sys_clk_freq=self.sys_clk_freq)
self.csr_devices.append("drtio_transceiver")
drtioaux_csr_group = []
drtioaux_memory_group = []
drtiorep_csr_group = []
self.drtio_cri = []
for i in range(len(self.drtio_transceiver.channels)):
coreaux_name = "drtioaux" + str(i)
memory_name = "drtioaux" + str(i) + "_mem"
drtioaux_csr_group.append(coreaux_name)
drtioaux_memory_group.append(memory_name)
cdr = ClockDomainsRenamer({"rtio_rx": "rtio_rx" + str(i)})
# Satellite
if i == 0:
self.submodules.rx_synchronizer = cdr(XilinxRXSynchronizer())
core = cdr(DRTIOSatellite(
self.rtio_tsc, self.drtio_transceiver.channels[0], self.rx_synchronizer))
self.submodules.drtiosat = core
self.csr_devices.append("drtiosat")
# Repeaters
else:
corerep_name = "drtiorep" + str(i-1)
drtiorep_csr_group.append(corerep_name)
core = cdr(DRTIORepeater(
self.rtio_tsc, self.drtio_transceiver.channels[i]))
setattr(self.submodules, corerep_name, core)
self.drtio_cri.append(core.cri)
self.csr_devices.append(corerep_name)
coreaux = cdr(drtio_aux_controller.DRTIOAuxControllerBare(core.link_layer))
setattr(self.submodules, coreaux_name, coreaux)
self.csr_devices.append(coreaux_name)
mem_size = coreaux.get_mem_size()
tx_port = coreaux.get_tx_port()
rx_port = coreaux.get_rx_port()
memory_address = self.axi2csr.register_port(tx_port, mem_size)
# rcv in upper half of the memory, thus added second
self.axi2csr.register_port(rx_port, mem_size)
# and registered in PS interface
# manually, because software refers to rx/tx by halves of entire memory block, not names
self.add_memory_region(memory_name, self.mem_map["csr"] + memory_address, mem_size * 2)
self.rustc_cfg["has_drtio"] = None
self.rustc_cfg["has_drtio_routing"] = None
self.add_csr_group("drtioaux", drtioaux_csr_group)
self.add_csr_group("drtiorep", drtiorep_csr_group)
self.add_memory_group("drtioaux_mem", drtioaux_memory_group)
self.rustc_cfg["rtio_frequency"] = str(self.drtio_transceiver.rtio_clk_freq/1e6)
# Si5324 Phaser
self.submodules.siphaser = SiPhaser7Series(
si5324_clkin=platform.request("si5324_clkin"),
rx_synchronizer=self.rx_synchronizer,
ultrascale=False,
rtio_clk_freq=self.drtio_transceiver.rtio_clk_freq)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk, self.siphaser.mmcm_freerun_output)
self.csr_devices.append("siphaser")
self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324_33").rst_n)
self.csr_devices.append("si5324_rst_n")
self.rustc_cfg["has_si5324"] = None
self.rustc_cfg["has_siphaser"] = None
rtio_clk_period = 1e9/self.drtio_transceiver.rtio_clk_freq
# Constrain TX & RX timing for the first transceiver channel
# (First channel acts as master for phase alignment for all channels' TX)
gtx0 = self.drtio_transceiver.gtxs[0]
platform.add_period_constraint(gtx0.txoutclk, rtio_clk_period)
platform.add_period_constraint(gtx0.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk,
gtx0.txoutclk, gtx0.rxoutclk)
# Constrain RX timing for the each transceiver channel
# (Each channel performs single-lane phase alignment for RX)
for gtx in self.drtio_transceiver.gtxs[1:]:
platform.add_period_constraint(gtx.rxoutclk, rtio_clk_period)
platform.add_false_path_constraints(
self.ps7.cd_sys.clk, gtx.rxoutclk)
self.submodules.rtio_crg = RTIOClockMultiplier(self.sys_clk_freq)
self.csr_devices.append("rtio_crg")
fix_serdes_timing_path(self.platform)
def add_rtio(self, rtio_channels):
self.submodules.rtio_moninj = rtio.MonInj(rtio_channels)
self.csr_devices.append("rtio_moninj")
if self.acpki:
self.rustc_cfg["ki_impl"] = "acp"
self.submodules.rtio = acpki.KernelInitiator(self.rtio_tsc,
bus=self.ps7.s_axi_acp,
user=self.ps7.s_axi_acp_user,
evento=self.ps7.event.o)
self.csr_devices.append("rtio")
else:
self.rustc_cfg["ki_impl"] = "csr"
self.submodules.rtio = rtio.KernelInitiator(self.rtio_tsc, now64=True)
self.csr_devices.append("rtio")
self.submodules.local_io = SyncRTIO(self.rtio_tsc, rtio_channels)
self.submodules.cri_con = rtio.CRIInterconnectShared(
[self.drtiosat.cri],
[self.local_io.cri] + self.drtio_cri,
mode="sync", enable_routing=True)
self.csr_devices.append("cri_con")
self.submodules.routing_table = rtio.RoutingTableAccess(self.cri_con)
self.csr_devices.append("routing_table")
class _Simple_RTIO:
def __init__(self):
platform = self.platform
rtio_channels = []
@ -140,23 +443,11 @@ class Simple(ZC706):
self.add_rtio(rtio_channels)
# The NIST backplanes require setting VADJ to 3.3V by reprogramming the power supply.
# This also changes the I/O standard for some on-board LEDs.
leds_fmc33 = [
("user_led_33", 0, Pins("Y21"), IOStandard("LVCMOS33")),
("user_led_33", 1, Pins("G2"), IOStandard("LVCMOS15")),
("user_led_33", 2, Pins("W21"), IOStandard("LVCMOS33")),
("user_led_33", 3, Pins("A17"), IOStandard("LVCMOS15")),
]
class NIST_CLOCK(ZC706):
class _NIST_CLOCK_RTIO:
"""
NIST clock hardware, with old backplane and 11 DDS channels
"""
def __init__(self, **kwargs):
ZC706.__init__(self, **kwargs)
def __init__(self):
platform = self.platform
platform.add_extension(nist_clock.fmc_adapter_io)
platform.add_extension(leds_fmc33)
@ -203,14 +494,12 @@ class NIST_CLOCK(ZC706):
self.add_rtio(rtio_channels)
class NIST_QC2(ZC706):
class _NIST_QC2_RTIO:
"""
NIST QC2 hardware, as used in Quantum I and Quantum II, with new backplane
and 24 DDS channels. Two backplanes are used.
"""
def __init__(self, **kwargs):
ZC706.__init__(self, **kwargs)
def __init__(self):
platform = self.platform
platform.add_extension(nist_qc2.fmc_adapter_io)
platform.add_extension(leds_fmc33)
@ -253,7 +542,56 @@ class NIST_QC2(ZC706):
self.add_rtio(rtio_channels)
VARIANTS = {cls.__name__.lower(): cls for cls in [Simple, NIST_CLOCK, NIST_QC2]}
class Simple(ZC706, _Simple_RTIO):
def __init__(self, acpki):
ZC706.__init__(self, acpki)
_Simple_RTIO.__init__(self)
class Master(_MasterBase, _Simple_RTIO):
def __init__(self, acpki):
_MasterBase.__init__(self, acpki)
_Simple_RTIO.__init__(self)
class Satellite(_SatelliteBase, _Simple_RTIO):
def __init__(self, acpki):
_SatelliteBase.__init__(self, acpki)
_Simple_RTIO.__init__(self)
class NIST_CLOCK(ZC706, _NIST_CLOCK_RTIO):
def __init__(self, acpki):
ZC706.__init__(self, acpki)
_NIST_CLOCK_RTIO.__init__(self)
class NIST_CLOCK_Master(_MasterBase, _NIST_CLOCK_RTIO):
def __init__(self, acpki):
_MasterBase.__init__(self, acpki)
_NIST_CLOCK_RTIO.__init__(self)
class NIST_CLOCK_Satellite(_SatelliteBase, _NIST_CLOCK_RTIO):
def __init__(self, acpki):
_SatelliteBase.__init__(self, acpki)
_NIST_CLOCK_RTIO.__init__(self)
class NIST_QC2(ZC706, _NIST_QC2_RTIO):
def __init__(self, acpki):
ZC706.__init__(self, acpki)
_NIST_QC2_RTIO.__init__(self)
class NIST_QC2_Master(_MasterBase, _NIST_QC2_RTIO):
def __init__(self, acpki):
_MasterBase.__init__(self, acpki)
_NIST_QC2_RTIO.__init__(self)
class NIST_QC2_Satellite(_SatelliteBase, _NIST_QC2_RTIO):
def __init__(self, acpki):
_SatelliteBase.__init__(self, acpki)
_NIST_QC2_RTIO.__init__(self)
VARIANTS = {cls.__name__.lower(): cls for cls in [Simple, Master, Satellite,
NIST_CLOCK, NIST_CLOCK_Master, NIST_CLOCK_Satellite,
NIST_QC2, NIST_QC2_Master, NIST_QC2_Satellite]}
def write_csr_file(soc, filename):
@ -261,6 +599,11 @@ def write_csr_file(soc, filename):
f.write(cpu_interface.get_csr_rust(
soc.get_csr_regions(), soc.get_csr_groups(), soc.get_constants()))
def write_mem_file(soc, filename):
with open(filename, "w") as f:
f.write(cpu_interface.get_mem_rust(
soc.get_memory_regions(), soc.get_memory_groups(), None))
def write_rustc_cfg_file(soc, filename):
with open(filename, "w") as f:
@ -276,6 +619,8 @@ def main():
description="ARTIQ port to the ZC706 Zynq development kit")
parser.add_argument("-r", default=None,
help="build Rust interface into the specified file")
parser.add_argument("-m", default=None,
help="build Rust memory interface into the specified file")
parser.add_argument("-c", default=None,
help="build Rust compiler configuration into the specified file")
parser.add_argument("-g", default=None,
@ -300,11 +645,12 @@ def main():
if args.r is not None:
write_csr_file(soc, args.r)
if args.m is not None:
write_mem_file(soc, args.m)
if args.c is not None:
write_rustc_cfg_file(soc, args.c)
if args.g is not None:
soc.build(build_dir=args.g)
if __name__ == "__main__":
main()

Loading…
Cancel
Save