artiq-zynq/src/gateware/acpki.py

261 lines
7.9 KiB
Python
Raw Normal View History

from operator import attrgetter
from migen import *
from migen.genlib.cdc import MultiReg
from migen_axi.interconnect import axi
from misoc.interconnect.csr import *
from artiq.gateware import rtio
OUT_BURST_LEN = 4
IN_BURST_LEN = 4
class Engine(Module, AutoCSR):
def __init__(self, bus, user):
self.addr_base = CSRStorage(32)
self.trig_count = CSRStatus(32)
self.write_count = CSRStatus(32)
self.trigger_stb = Signal()
# Dout : Data received from CPU, output by DMA module
# Din : Data driven into DMA module, written into CPU
# When stb assert, index shows word being read/written, dout/din holds
# data
#
# Cycle:
# trigger_stb pulsed at start
# Then out_burst_len words are strobed out of dout
# Then, when din_ready is high, in_burst_len words are strobed in to din
self.dout_stb = Signal()
self.din_stb = Signal()
self.dout_index = Signal(max=16)
self.din_index = Signal(max=16)
self.din_ready = Signal()
self.dout = Signal(64)
self.din = Signal(64)
###
self.sync += If(self.trigger_stb, self.trig_count.status.eq(self.trig_count.status+1))
self.comb += [
user.aruser.eq(0x1f),
user.awuser.eq(0x1f)
]
ar, aw, w, r, b = attrgetter("ar", "aw", "w", "r", "b")(bus)
### Read
self.comb += [
ar.addr.eq(self.addr_base.storage),
self.dout.eq(r.data),
r.ready.eq(1),
ar.burst.eq(axi.Burst.incr.value),
ar.len.eq(OUT_BURST_LEN-1), # Number of transfers in burst (0->1 transfer, 1->2 transfers...)
ar.size.eq(3), # Width of burst: 3 = 8 bytes = 64 bits
ar.cache.eq(0xf),
]
# read control
self.submodules.read_fsm = read_fsm = FSM(reset_state="IDLE")
read_fsm.act("IDLE",
If(self.trigger_stb,
ar.valid.eq(1),
If(ar.ready,
NextState("READ")
).Else(
NextState("READ_START")
)
)
)
read_fsm.act("READ_START",
ar.valid.eq(1),
If(ar.ready,
NextState("READ"),
)
)
read_fsm.act("READ",
ar.valid.eq(0),
If(r.last & r.valid,
NextState("IDLE")
)
)
self.sync += [
If(read_fsm.ongoing("IDLE"),
self.dout_index.eq(0)
).Else(If(r.valid & read_fsm.ongoing("READ"),
self.dout_index.eq(self.dout_index+1)
)
)
]
self.comb += self.dout_stb.eq(r.valid & r.ready)
### Write
self.comb += [
w.data.eq(self.din),
aw.addr.eq(self.addr_base.storage+32), # Write to next cache line
w.strb.eq(0xff),
aw.burst.eq(axi.Burst.incr.value),
aw.len.eq(IN_BURST_LEN-1), # Number of transfers in burst minus 1
aw.size.eq(3), # Width of burst: 3 = 8 bytes = 64 bits
aw.cache.eq(0xf),
b.ready.eq(1),
]
# write control
self.submodules.write_fsm = write_fsm = FSM(reset_state="IDLE")
write_fsm.act("IDLE",
w.valid.eq(0),
aw.valid.eq(0),
If(self.trigger_stb,
aw.valid.eq(1),
If(aw.ready, # assumes aw.ready is not randomly deasserted
NextState("DATA_WAIT")
).Else(
NextState("AW_READY_WAIT")
)
)
)
write_fsm.act("AW_READY_WAIT",
aw.valid.eq(1),
If(aw.ready,
NextState("DATA_WAIT"),
)
)
write_fsm.act("DATA_WAIT",
aw.valid.eq(0),
If(self.din_ready,
w.valid.eq(1),
NextState("WRITE")
)
)
write_fsm.act("WRITE",
w.valid.eq(1),
If(w.ready & w.last,
NextState("IDLE")
)
)
self.sync += If(w.ready & w.valid, self.write_count.status.eq(self.write_count.status+1))
self.sync += [
If(write_fsm.ongoing("IDLE"),
self.din_index.eq(0)
),
If(w.ready & w.valid, self.din_index.eq(self.din_index+1))
]
self.comb += [
w.last.eq(0),
If(self.din_index==aw.len, w.last.eq(1))
]
self.comb += self.din_stb.eq(w.valid & w.ready)
class KernelInitiator(Module, AutoCSR):
def __init__(self, tsc, bus, user, evento):
# Core is disabled upon reset to avoid spurious triggering if evento toggles from e.g. boot code.
self.enable = CSRStorage()
self.counter = CSRStatus(64)
self.counter_update = CSR()
self.submodules.engine = Engine(bus, user)
self.cri = rtio.cri.Interface()
###
evento_stb = Signal()
evento_latched = Signal()
evento_latched_d = Signal()
self.specials += MultiReg(evento, evento_latched)
self.sync += evento_latched_d.eq(evento_latched)
self.comb += self.engine.trigger_stb.eq(self.enable.storage & (evento_latched != evento_latched_d))
cri = self.cri
cmd = Signal(8)
cmd_write = Signal()
cmd_read = Signal()
self.comb += [
cmd_write.eq(cmd == 0),
cmd_read.eq(cmd == 1)
]
dout_cases = {}
dout_lw = Signal(32)
dout_hw = Signal(32)
self.comb += [
dout_lw.eq(self.engine.dout[:32]),
dout_hw.eq(self.engine.dout[32:])
]
dout_cases[0] = [
cmd.eq(dout_lw[24:]),
cri.chan_sel.eq(dout_lw[:24]),
cri.o_address.eq(dout_hw[:16])
]
dout_cases[1] = [
cri.o_timestamp.eq(self.engine.dout)
]
dout_cases[2] = [cri.o_data.eq(self.engine.dout)] # only lowest 64 bits
self.sync += [
cri.cmd.eq(rtio.cri.commands["nop"]),
If(self.engine.dout_stb,
Case(self.engine.dout_index, dout_cases),
If(self.engine.dout_index == 2,
If(cmd_write, cri.cmd.eq(rtio.cri.commands["write"])),
If(cmd_read, cri.cmd.eq(rtio.cri.commands["read"]))
)
)
]
# If input event, wait for response before allow input data to be
# sampled
# TODO: If output, wait for wait flag clear
RTIO_I_STATUS_WAIT_STATUS = 4
RTIO_O_STATUS_WAIT = 1
self.submodules.fsm = fsm = FSM(reset_state="IDLE")
fsm.act("IDLE",
If(self.engine.trigger_stb, NextState("WAIT_OUT_CYCLE"))
)
fsm.act("WAIT_OUT_CYCLE",
self.engine.din_ready.eq(0),
If(self.engine.dout_stb & (self.engine.dout_index == 3),
NextState("WAIT_READY")
)
)
fsm.act("WAIT_READY",
If(cmd_read & (cri.i_status & RTIO_I_STATUS_WAIT_STATUS == 0) \
| cmd_write & ~(cri.o_status & RTIO_O_STATUS_WAIT),
self.engine.din_ready.eq(1),
NextState("IDLE")
)
)
din_cases_cmdwrite = {
0: [self.engine.din.eq((1<<16) | cri.o_status)],
1: [self.engine.din.eq(0)],
}
din_cases_cmdread = {
0: [self.engine.din[:32].eq((1<<16) | cri.i_status), self.engine.din[32:].eq(cri.i_data)],
1: [self.engine.din.eq(cri.i_timestamp)]
}
self.comb += [
If(cmd_read, Case(self.engine.din_index, din_cases_cmdread)),
If(cmd_write, Case(self.engine.din_index, din_cases_cmdwrite)),
]
# RTIO counter access
self.sync += If(self.counter_update.re, self.counter.status.eq(tsc.full_ts_cri))