diff --git a/content/experiment-control/sinara-core.md b/content/experiment-control/sinara-core.md index 69dc940..3df8b2a 100644 --- a/content/experiment-control/sinara-core.md +++ b/content/experiment-control/sinara-core.md @@ -34,21 +34,32 @@ One of the main devices in the Sinara family is the 1123 Carrier (codenamed Kasl {% layout_text_img(src="images/isolated-ttl@2x.png", popup="images/origin/dio.jpg", alt="", textleft=true, shadow=false) %} -##### Sinara 2118/2128/2138 TTL cards +##### Sinara 2118/2128/2138 8-channel isolated TTL cards -For simple TTL signals, we offer I/O cards in the EEM form factor with 8 channels over BNC (2118), SMA (2128) or MCX (2138) connectors. The IOs are divided into two banks of 4, with per-bank ground isolation. The direction (input/output) and termination (high-Z/50R) is selectable on a per-channel basis via I2C or on-board switches. The open circuit voltage of outputs is 5V, and outputs can supply a valid TTL level into 50Ω and tolerate an indefinite short circuit to ground. +For simple TTL signals, we offer I/O cards in the EEM form factor with 8 channels over BNC (2118), SMA (2128) or MCX (2138) connectors. The IOs are divided into two banks of 4, with per-bank ground isolation. The direction (input/output) and termination (high-Z/50Ω) is selectable on a per-channel basis via I2C or on-board switches. The open circuit voltage of outputs is 5V, and outputs can supply a valid TTL level into 50Ω and tolerate an indefinite short circuit to ground. More information: BNC card SMA card {% end %} +{% layout_text_img(src="images/DIOMCX@2x.png", popup="images/origin/dio_mcx.jpg", alt="", shadow=false) %} + +##### Sinara 2238 16-channel non-isolated MCX TTL card + +When higher densities or faster speeds are required, the Sinara 2238 MCX card is available. It provides 16 non-isolated channels in 4hp of space using MCX connectors. The card is bidirectional, with the direction controlled in groups of 4 channels. Each IO can be individually terminated with 50Ω. + +More information + +{% end %} -{% layout_text_img(src="images/LVDS@2x.png", popup="images/origin/dio_rj45.jpg", alt="", shadow=false) %} -##### Sinara 2245 LVDS TTL card +{% layout_text_img(src="images/LVDS@2x.png", popup="images/origin/dio_rj45.jpg", alt="", textleft=true, shadow=false) %} -For high-density or faster signals, the Sinara 2245 is an extension module supplying 16 LVDS pairs via 4 front-panel RJ45 connectors. + +##### Sinara 2245 16-channel non-isolated LVDS RJ45 TTL card + +For even higher-density or even faster signals, the Sinara 2245 is an extension module supplying 16 LVDS pairs via 4 front-panel RJ45 connectors. Each RJ45 supplies 4 LVDS DIOs. The direction (input/output) is individually selectable for each signal via on-board switches. Outputs are intended to drive 100Ω loads (LVDS is short-circuit protected), inputs are 100Ω terminated. The connectors dedicate all 8 pins to LVDS signals, ground is on the connector shield so only shielded Ethernet cat 6 shielded cables are allowed. More information @@ -57,7 +68,7 @@ Each RJ45 supplies 4 LVDS DIOs. The direction (input/output) is individually sel -{% layout_text_img(src="images/Banker-TTL-1@2x.png", popup="images/origin/banker1.jpg", alt="", textleft=true, shadow=false) %} +{% layout_text_img(src="images/Banker-TTL-1@2x.png", popup="images/origin/banker1.jpg", alt="", shadow=false) %} ##### Sinara 3128 TTL I/O expander "Banker" @@ -75,7 +86,7 @@ Interfaces include: {% layout_text_img(src="images/Banker-TTL-2@2x.png", popup="images/origin/banker2.jpg", alt="", textleft=true, shadow=false) %} -All outputs can be configured either as 3.3 or 5V. They can drive 50R load when set to 5V. FPGA can is configured from on-board FLASH. FLASH can be updated over I2C or with the on-board SPI connector. +All outputs can be configured either as 3.3 or 5V. They can drive 50Ω load when set to 5V. FPGA can is configured from on-board FLASH. FLASH can be updated over I2C or with the on-board SPI connector. The VHDCI connections can be used to interface with either non-buffered or buffered remote boards that distribute signals to neighboring modules. These modules can be assembled together and placed in COTS enclosures. The enclosures fit onto the low-cost and simple DIN rail standard. diff --git a/static/images/DIOMCX@2x.png b/static/images/DIOMCX@2x.png new file mode 100644 index 0000000..88aca9f Binary files /dev/null and b/static/images/DIOMCX@2x.png differ diff --git a/static/images/origin/dio_mcx.jpg b/static/images/origin/dio_mcx.jpg new file mode 100644 index 0000000..060dc92 Binary files /dev/null and b/static/images/origin/dio_mcx.jpg differ