forked from sinara-hw/datasheets
277 lines
9.4 KiB
TeX
277 lines
9.4 KiB
TeX
\documentclass[10pt]{datasheet}
|
|
\usepackage{palatino}
|
|
\usepackage{textgreek}
|
|
\usepackage{minted}
|
|
\usepackage{tcolorbox}
|
|
\usepackage{etoolbox}
|
|
\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}%
|
|
\AfterEndEnvironment{minted}{\end{tcolorbox}}%
|
|
|
|
\usepackage[justification=centering]{caption}
|
|
|
|
\usepackage[utf8]{inputenc}
|
|
\usepackage[english]{babel}
|
|
\usepackage[english]{isodate}
|
|
|
|
\usepackage{graphicx}
|
|
\usepackage{subfigure}
|
|
|
|
\usepackage{tikz}
|
|
\usepackage{pgfplots}
|
|
\usepackage{circuitikz}
|
|
\usetikzlibrary{calc}
|
|
\usetikzlibrary{fit,backgrounds}
|
|
|
|
\title{5432 Zotino}
|
|
\author{M-Labs Limited}
|
|
\date{December 2021}
|
|
\revision{Revision 1}
|
|
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
|
|
|
|
\begin{document}
|
|
\maketitle
|
|
|
|
\section{Features}
|
|
|
|
\begin{itemize}
|
|
\item{32-channels DAC.}
|
|
\item{16-bits resolution.}
|
|
\item{1 MSPS shared between all channels.}
|
|
\item{Output voltage $\pm$10V.}
|
|
\item{HD68 connector.}
|
|
\item{Can be broken out to BNC/SMA/MCX.}
|
|
\end{itemize}
|
|
|
|
\section{Applications}
|
|
|
|
\begin{itemize}
|
|
\item{Controlling setpoints of PID controllers for laser power stabilization.}
|
|
\item{Low-frequency arbitrary waveform generation.}
|
|
\item{Driving DC electrodes in ion traps.}
|
|
\end{itemize}
|
|
|
|
\section{General Description}
|
|
The 5432 Zotino is a 4hp EEM module part of the ARTIQ Sinara family.
|
|
It adds digital-analog converting capabilities to carrier cards such as 1124 Kasli and 1125 Kasli-SoC.
|
|
|
|
It provides 4 groups of 8 analog channels each, exposed by 1 HD68 connector.
|
|
Each channel supports output voltage from -10 V to 10 V.
|
|
All channels can be updated simultaneously.
|
|
|
|
% Switch to next column
|
|
\vfill\break
|
|
|
|
\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}}
|
|
\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}}
|
|
|
|
\begin{figure}[h]
|
|
\centering
|
|
\scalebox{0.88}{
|
|
\begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]
|
|
|
|
% HD68 Connector
|
|
\draw (0, 0) node[muxdemux, muxdemux def={Lh=6.5, Rh=8, w=2, NL=0, NB=0, NR=0}, circuitikz/bipoles/twoport/width=3.2, scale=0.7] (hd68) {HD68};
|
|
|
|
% EEM Connectors to IDC cards
|
|
\draw (2.2, 1.2) node[twoportshape, t={\MyLabel{EEM}{ADC 16-23}}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (eem2) {};
|
|
\draw (1.4, 1.2) node[twoportshape, t={\MyLabel{EEM}{ADC 24-31}}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (eem3) {};
|
|
\draw (2.2, -1.2) node[twoportshape, t={\MyLabel{EEM}{ADC 8-15}}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (eem1) {};
|
|
\draw (1.4, -1.2) node[twoportshape, t={\MyLabel{EEM}{ADC 0-7}}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (eem0) {};
|
|
|
|
% Op-amp x32
|
|
\draw (3.6, 0) node[buffer, circuitikz/bipoles/twoport/width=1.2, scale=-0.5] (amp) {};
|
|
|
|
% DAC AD5372
|
|
\draw (5.2, 0) node[twoportshape, t={DAC}, circuitikz/bipoles/twoport/width=1.2, scale=0.7] (dac) {};
|
|
|
|
% LVDS Transceivers
|
|
\draw (6.6, 1.6) node[twoportshape, t=\MymyLabel{LVDS}{Transceiever}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (lvds0) {};
|
|
\draw (6.6, -1.6) node[twoportshape, t=\MymyLabel{LVDS}{Transceiever}, circuitikz/bipoles/twoport/width=1.8, scale=0.5, rotate=-90] (lvds1) {};
|
|
|
|
% Aesthetic EEPROM
|
|
\draw (6.6, 0) node[twoportshape, t={EEPROM}, circuitikz/bipoles/twoport/width=1.6, scale=0.5, rotate=-90] (eeprom) {};
|
|
|
|
% EEMs from core device / controllers
|
|
\draw (8.2, 0.0) node[twoportshape, t={EEM Port}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem_in) {};
|
|
|
|
% Connect EEM IN to LVDS & EEMPROM
|
|
\draw [latexslim-latexslim] (eeprom.north) -- (7.85, 0);
|
|
\draw [latexslim-latexslim] (lvds0.north) -- (7.85, 1.6);
|
|
\draw [latexslim-latexslim] (lvds1.north) -- (7.85, -1.6);
|
|
|
|
% Connect LVDS to DAC
|
|
\draw [latexslim-latexslim] (lvds0.south) -- (5.2, 1.6) -- (dac.north);
|
|
\draw [latexslim-latexslim] (lvds1.south) -- (5.2, -1.6) -- (dac.south);
|
|
|
|
% Connect DAC to Op-amp, label op-amp width x32
|
|
\draw [-latexslim] (dac.west) -- (amp.west);
|
|
\node [label=below:\tiny{Op-amp x32}] at (3.6, -0.2) {};
|
|
\node [label=below:\tiny{1 per ch.}] at (3.6, -0.45) {};
|
|
|
|
% Connect Op-amp to EEM OUT and HD68
|
|
\draw [-latexslim] (amp.east) -- (hd68.east);
|
|
\draw [-latexslim] (2.2, 0) -- (eem2.east);
|
|
\draw [-latexslim] (1.4, 0) -- (eem3.east);
|
|
\draw [-latexslim] (2.2, 0) -- (eem1.west);
|
|
\draw [-latexslim] (1.4, 0) -- (eem0.west);
|
|
|
|
\end{circuitikz}
|
|
}
|
|
|
|
\caption{Simplified Block Diagram}
|
|
\end{figure}
|
|
|
|
\begin{figure}[h]
|
|
\centering
|
|
\includegraphics[width=3in]{photo5432.jpg}
|
|
\caption{Zotino Card photo}
|
|
\end{figure}
|
|
|
|
% For wide tables, a single column layout is better. It can be switched
|
|
% page-by-page.
|
|
\onecolumn
|
|
|
|
\section{Electrical Specifications}
|
|
|
|
\begin{table}[h]
|
|
\begin{threeparttable}
|
|
\caption{Output Specifications}
|
|
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
|
\thickhline
|
|
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
|
\textbf{Unit} & \textbf{Conditions} \\
|
|
\hline
|
|
Output voltage & $V_{out}$ & -10 & & 10 & V & \\
|
|
\hline
|
|
Output impedance & $Z_{out}$ & \multicolumn{4}{c|}{470 $\Omega$ $||$ 2.2nF} & \\
|
|
\hline
|
|
Resolution & & & 16 & & bits & \\
|
|
\hline
|
|
3dB bandwidth & & & 75 & & kHz & \\
|
|
\hline
|
|
Power consumption & & 3 & & 8.7 & W & \\
|
|
\thickhline
|
|
\end{tabularx}
|
|
\end{threeparttable}
|
|
\end{table}
|
|
|
|
Output noise are measured after 15 cm IDC cable, IDC-SMA, 100 cm coax ($\sim$50 pF), and 500 k$\Omega$ $||$ 150 pF. The DAC output is 3.5 V.
|
|
|
|
\begin{table}[h]
|
|
\begin{threeparttable}
|
|
\caption{Electrical Characteristics}
|
|
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
|
\thickhline
|
|
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
|
\textbf{Unit} & \textbf{Conditions / Comments} \\
|
|
\hline
|
|
DC cross-talk & & & -116 & & dB & \\
|
|
\hline
|
|
Fall-time & & & 18.5 & & $\mu$s & 10\% to 90\% fall-time \\
|
|
& & & 25 & & $\mu$s & 1\% to 99\% fall-time \\
|
|
\hline
|
|
Negative overshoot & & & 0.5\% & & - & \\
|
|
\hline
|
|
Rise-time & & & 30 & & $\mu$s & 1\% to 99\% rise-time \\
|
|
\hline
|
|
Positive overshoot & & & 0.65\% & & - & \\
|
|
\hline
|
|
Output noise & & & & & & \\
|
|
\hspace{18mm} @ 100 Hz & & & 500 & & nV/rtHz & 6.9 Hz bandwidth \\
|
|
\hspace{18mm} @ 300 Hz & & & 300 & & nV/rtHz & 6.9 Hz bandwidth \\
|
|
\hspace{18mm} @ 50 kHz & & & 210 & & nV/rtHz & 6.9 kHz bandwidth \\
|
|
\hspace{18mm} @ 1 MHz & & & 4.6 & & nV/rtHz & 6.9 kHz bandwidth \\
|
|
\hspace{18mm} $>$ 4 MHz & & & & 1 & nV/rtHz & 6.9 kHz bandwidth \\
|
|
\thickhline
|
|
\end{tabularx}
|
|
\end{threeparttable}
|
|
\end{table}
|
|
|
|
\newpage
|
|
|
|
\begin{figure}[h]
|
|
\centering
|
|
\includegraphics[width=3.3in]{zotino_step_response_rising.png}
|
|
\caption{Step response (switching from -10V to +10V)}
|
|
\end{figure}
|
|
|
|
\begin{figure}[h]
|
|
\centering
|
|
\includegraphics[width=3.3in]{zotino_step_response_falling.png}
|
|
\caption{Step response (switching from +10V to -10V)}
|
|
\end{figure}
|
|
|
|
\begin{figure}[hbt!]
|
|
\centering
|
|
\includegraphics[width=3.3in]{zotino_fext.png}
|
|
\caption{Step crosstalk}
|
|
\end{figure}
|
|
|
|
\newpage
|
|
|
|
\section{Example ARTIQ code}
|
|
The sections below demonstrate simple usage scenarios of the 5432 Zotino card with the ARTIQ control system.
|
|
They do not exhaustively demonstrate all the features of the ARTIQ system.
|
|
The full documentation for the ARTIQ software and gateware is available at \url{https://m-labs.hk}.
|
|
|
|
\subsection{Set output voltage}
|
|
The following example initializes the Zotino card, then emits 1.0 V, 2.0 V, 3.0 V and 4.0 V at channel 0, 1, 2, 3 respectively.
|
|
Voltages of all 4 channels are updated simultaneously with the use of \texttt{set\char`_dac()}.
|
|
|
|
\begin{minted}{python}
|
|
def prepare(self):
|
|
self.channels = [0, 1, 2, 3]
|
|
self.voltages = [1.0, 2.0, 3.0, 4.0]
|
|
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
self.core.break_realtime()
|
|
self.zotino.init()
|
|
|
|
delay(1*ms)
|
|
self.zotino.set_dac(self.voltages, self.channels)
|
|
\end{minted}
|
|
|
|
\subsection{Triangular Wave}
|
|
A triangular waveform at 10 Hz, 16 V peak-to-peak.
|
|
Timing accuracy of the RTIO system can be demonstrated by the precision of the frequency.
|
|
\begin{minted}{python}
|
|
from scipy import signal
|
|
import numpy
|
|
|
|
def prepare(self):
|
|
self.period = 0.1*s
|
|
self.sample = 128
|
|
t = numpy.linspace(0, 1, self.sample)
|
|
self.voltages = 8*signal.sawtooth(2*numpy.pi*t, 0.5)
|
|
self.interval = self.period/self.sample
|
|
|
|
@kernel
|
|
def run(self):
|
|
self.core.reset()
|
|
self.core.break_realtime()
|
|
self.zotino.init()
|
|
|
|
delay(1*ms)
|
|
|
|
counter = 0
|
|
while True:
|
|
self.zotino.set_dac([self.voltages[counter]], [0])
|
|
counter = (counter + 1) % self.sample
|
|
delay(self.interval)
|
|
\end{minted}
|
|
|
|
\section{Ordering Information}
|
|
To order, please visit \url{https://m-labs.hk} and select the 5432 Zotino in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}.
|
|
|
|
\section*{}
|
|
\vspace*{\fill}
|
|
|
|
\begin{footnotesize}
|
|
Information furnished by M-Labs Limited is believed to be accurate and reliable. However, no responsibility is assumed by M-Labs Limited for its use, nor for any infringements of patents or other rights of third parties that may result from its use.
|
|
Specifications subject to change without notice.
|
|
\end{footnotesize}
|
|
|
|
\end{document}
|