sinarads/5568.tex

\input{preamble.tex}
\graphicspath{{images/5568}{images}}

\title{5568 HD68-IDC}
\author{M-Labs Limited}
\date{January 2022}
\revision{Revision 1}
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}

\begin{document}
\maketitle

\section{Features}

\begin{itemize}
    \item{32 channels}
    \item{Internal IDC connector}
    \item{External HD68 connectors}
\end{itemize}

\section{Applications}

\begin{itemize}
    \item{Branch out analog signal from: \begin{itemize}
        \item{5432 DAC Zotino}
        \item{5632 DAC Fastino}
    \end{itemize}}
    \item{BNC or SMA adapter when used with: \begin{itemize}
        \item{5518 BNC-IDC}
        \item{5528 SMA-IDC}
    \end{itemize}}
\end{itemize}

\section{General Description}
The 5568 HD68-IDC card is a 4hp EEM module, part of the ARTIQ/Sinara family. It is an adapter card that converts IDC connections to or from HD68 connections. It can be connected via external HD68 cable to 5518 BNC-IDC or 5528 SMA-IDC cards.

Each card supports 32 channels, with one HD68 connector and four IDC connectors. Each IDC connector supports 8 channels. All 32 channels can be accessed using an external HD68 cable.

% Switch to next column
\vfill\break

\begin{figure}[h]
    \centering
    \scalebox{1}{
    \begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]

        % HD68 Connector
        \draw (0, 0) node[muxdemux, muxdemux def={Lh=6.5, Rh=8, w=2, NL=0, NB=0, NR=0}, circuitikz/bipoles/twoport/width=3.2, scale=0.7] (hd68) {HD68};

        % IDC Connectors to IDC cards
        \draw (3.0, 1.8) node[twoportshape, t={\twocm{IDC}{CH 16-23}}, circuitikz/bipoles/twoport/width=1.8, scale=0.7, rotate=-90] (eem2) {};
        \draw (1.8, 1.8) node[twoportshape, t={\twocm{IDC}{CH 24-31}}, circuitikz/bipoles/twoport/width=1.8, scale=0.7, rotate=-90] (eem3) {};
        \draw (3.0, -1.8) node[twoportshape, t={\twocm{IDC}{CH 8-15}}, circuitikz/bipoles/twoport/width=1.8, scale=0.7, rotate=-90] (eem1) {};
        \draw (1.8, -1.8) node[twoportshape, t={\twocm{IDC}{CH 0-7}}, circuitikz/bipoles/twoport/width=1.8, scale=0.7, rotate=-90] (eem0) {};

        % Connect Op-amp to EEM OUT and HD68
        \draw [-latexslim] (3.0, 0) -- (hd68.east);
        \draw [-latexslim] (3.0, 0) -- (eem2.east);
        \draw [-latexslim] (1.8, 0) -- (eem3.east);
        \draw [-latexslim] (3.0, 0) -- (eem1.west);
        \draw [-latexslim] (1.8, 0) -- (eem0.west);

    \end{circuitikz}
    }

    \caption{Simplified Block Diagram}
\end{figure}

\begin{figure}[h]
    \centering
    \includegraphics[height=3.5in, angle=90]{photo5568.jpg}
    \includegraphics[height=3in, angle=90]{HD68_IDC_FP.pdf}
    \caption{Card and front panel}
\end{figure}

% For wide tables, a single column layout is better. It can be switched
% page-by-page.
\onecolumn

\sourcesection{5568 HD68-IDC}{https://github.com/sinara-hw/IDC_HD68_Adapter}

\section{Cable Connection Diagram}
The 5568 HD68-IDC card can convert signals from HD68 format to IDC format. Within the Sinara family, the analog output of 5432 DAC Zotino \& 5632 DAC Fastino cards is exported using HD68 connectors. To break out the analog signal into a different crate, connect 5568 HD68-IDC with the DAC card using an external SCSI cable. Then plug in IDC cables to the appropriate IDC connectors to break out the signal to e.g. 5518 BNC-IDC, 5528 SMA-IDC, or 5538 MCX-IDC.

The cable connections for 5568 HD68-IDC can be seen in the diagram below.

\begin{figure}[h]
    \centering
    \includegraphics[height=4in]{hd68_idc_connection.pdf}
    \caption{HD68-IDC connection diagram}
\end{figure}

\ordersection{5568 HD68-IDC}

\finalfootnote

\end{document}