firmware/ksupport: restore exception id order

Currently the exact ordering is compared in the `pending_priorities`
test which is not necessary and is non-deterministic. This patch only
 asserts the middle priority experiment is ran before the high priority
 experiment scheduled in the future.

Signed-off-by: Kanyang Ying <lexugeyky@outlook.com>

RELEASE_NOTES.rst

@@ -17,7 +17,7 @@ Highlights:
    - Almazny mezzanine board for Mirny
    - Phaser: improved documentation, exposed the DAC coarse mixer and ``sif_sync``, exposed upconverter calibration
      and enabling/disabling of upconverter LO & RF outputs, added helpers to align Phaser updates to the
-     RTIO timeline (``get_next_frame_mu()``
+     RTIO timeline (``get_next_frame_mu()``).
    - Urukul: ``get()``, ``get_mu()``, ``get_att()``, and ``get_att_mu()`` functions added for AD9910 and AD9912.
 * Softcore targets now use the RISC-V architecture (VexRiscv) instead of OR1K (mor1kx).
 * Gateware FPU is supported on KC705 and Kasli 2.0.
@@ -67,9 +67,9 @@ Breaking changes:
   generated for some configurations.
 * Phaser: fixed coarse mixer frequency configuration
 * Mirny: Added extra delays in ``ADF5356.sync()``. This avoids the need of an extra delay before
-  calling `ADF5356.init()`.
+  calling ``ADF5356.init()``.
 * The deprecated ``set_dataset(..., save=...)`` is no longer supported.
-* The ``PCA9548`` I2C switch class was renamed to ``I2CSwitch``, to accomodate support for PCA9547,
+* The ``PCA9548`` I2C switch class was renamed to ``I2CSwitch``, to accommodate support for PCA9547,
   and possibly other switches in future. Readback has been removed, and now only one channel per
   switch is supported.
 

artiq/_version.py

@@ -1,4 +1,4 @@
 import os
 
 def get_version():
-    return os.getenv("VERSIONEER_OVERRIDE", default="7.0.beta")
+    return os.getenv("VERSIONEER_OVERRIDE", default="7.0")

artiq/browser/experiments.py

@@ -285,8 +285,8 @@ class _ExperimentDock(QtWidgets.QMdiSubWindow):
         state = self.argeditor.save_state()
         self.argeditor.deleteLater()
         self.argeditor = _ArgumentEditor(self)
-        self.argeditor.restore_state(state)
         self.layout.addWidget(self.argeditor, 0, 0, 1, 5)
+        self.argeditor.restore_state(state)
 
     async def load_hdf5_task(self, filename=None):
         if filename is None:
@@ -406,7 +406,7 @@ class ExperimentsArea(QtWidgets.QMdiArea):
 
         self.worker_handlers = {
             "get_device_db": lambda: {},
-            "get_device": lambda k: {"type": "dummy"},
+            "get_device": lambda key, resolve_alias=False: {"type": "dummy"},
             "get_dataset": self._ddb.get,
             "update_dataset": self._ddb.update,
         }

artiq/browser/files.py

@@ -83,7 +83,7 @@ class ZoomIconView(QtWidgets.QListView):
             w = self.iconSize().width()*self.zoom_step**(
                 ev.angleDelta().y()/120.)
             if a <= w <= b:
-                self.setIconSize(QtCore.QSize(w, w*self.aspect))
+                self.setIconSize(QtCore.QSize(int(w), int(w*self.aspect)))
         else:
             QtWidgets.QListView.wheelEvent(self, ev)
 
@@ -102,13 +102,14 @@ class Hdf5FileSystemModel(QtWidgets.QFileSystemModel):
             h5 = open_h5(info)
             if h5 is not None:
                 try:
-                    expid = pyon.decode(h5["expid"][()])
+                    expid = pyon.decode(h5["expid"][()]) if "expid" in h5 else dict()
-                    start_time = datetime.fromtimestamp(h5["start_time"][()])
+                    start_time = datetime.fromtimestamp(h5["start_time"][()]) if "start_time" in h5 else "<none>"
                     v = ("artiq_version: {}\nrepo_rev: {}\nfile: {}\n"
                          "class_name: {}\nrid: {}\nstart_time: {}").format(
-                             h5["artiq_version"][()], expid["repo_rev"],
+                             h5["artiq_version"][()] if "artiq_version" in h5 else "<none>",
-                             expid.get("file", "<none>"), expid["class_name"],
+                             expid.get("repo_rev", "<none>"),
-                             h5["rid"][()], start_time)
+                             expid.get("file", "<none>"), expid.get("class_name", "<none>"),
+                             h5["rid"][()] if "rid" in h5 else "<none>", start_time)
                     return v
                 except:
                     logger.warning("unable to read metadata from %s",
@@ -174,14 +175,14 @@ class FilesDock(QtWidgets.QDockWidget):
         logger.debug("loading datasets from %s", info.filePath())
         with f:
             try:
-                expid = pyon.decode(f["expid"][()])
+                expid = pyon.decode(f["expid"][()]) if "expid" in f else dict()
-                start_time = datetime.fromtimestamp(f["start_time"][()])
+                start_time = datetime.fromtimestamp(f["start_time"][()]) if "start_time" in f else "<none>"
                 v = {
-                    "artiq_version": f["artiq_version"][()],
+                    "artiq_version": f["artiq_version"][()] if "artiq_version" in f else "<none>",
-                    "repo_rev": expid["repo_rev"],
+                    "repo_rev": expid.get("repo_rev", "<none>"),
                     "file": expid.get("file", "<none>"),
-                    "class_name": expid["class_name"],
+                    "class_name": expid.get("class_name", "<none>"),
-                    "rid": f["rid"][()],
+                    "rid": f["rid"][()] if "rid" in f else "<none>",
                     "start_time": start_time,
                 }
                 self.metadata_changed.emit(v)

artiq/compiler/embedding.py

@@ -45,21 +45,34 @@ class EmbeddingMap:
         self.object_forward_map = {}
         self.object_reverse_map = {}
         self.module_map = {}
+
+        # type_map connects the host Python `type` to the pair of associated
+        # `(TInstance, TConstructor)`s. The `used_…_names` sets cache the
+        # respective `.name`s for O(1) collision avoidance.
         self.type_map = {}
+        self.used_instance_type_names = set()
+        self.used_constructor_type_names = set()
+
         self.function_map = {}
         self.str_forward_map = {}
         self.str_reverse_map = {}
 
-        self.preallocate_runtime_exception_names(["RuntimeError",
+        # Keep this list of exceptions in sync with `EXCEPTION_ID_LOOKUP` in `artiq::firmware::ksupport::eh_artiq`
-                                                  "RTIOUnderflow",
+        # The exceptions declared here must be defined in `artiq.coredevice.exceptions`
-                                                  "RTIOOverflow",
+        # Verify synchronization by running the test cases in `artiq.test.coredevice.test_exceptions`
-                                                  "RTIODestinationUnreachable",
+        self.preallocate_runtime_exception_names([
-                                                  "DMAError",
+            "0:RuntimeError",
-                                                  "I2CError",
+            "RTIOUnderflow",
-                                                  "CacheError",
+            "RTIOOverflow",
-                                                  "SPIError",
+            "RTIODestinationUnreachable",
-                                                  "0:ZeroDivisionError",
+            "DMAError",
-                                                  "0:IndexError"])
+            "I2CError",
+            "CacheError",
+            "SPIError",
+            "0:ZeroDivisionError",
+            "0:IndexError",
+            "UnwrapNoneError",
+        ])
 
     def preallocate_runtime_exception_names(self, names):
         for i, name in enumerate(names):
@@ -91,16 +104,6 @@ class EmbeddingMap:
 
     # Types
     def store_type(self, host_type, instance_type, constructor_type):
-        self._rename_type(instance_type)
-        self.type_map[host_type] = (instance_type, constructor_type)
-
-    def retrieve_type(self, host_type):
-        return self.type_map[host_type]
-
-    def has_type(self, host_type):
-        return host_type in self.type_map
-
-    def _rename_type(self, new_instance_type):
         # Generally, user-defined types that have exact same name (which is to say, classes
         # defined inside functions) do not pose a problem to the compiler. The two places which
         # cannot handle this are:
@@ -109,12 +112,29 @@ class EmbeddingMap:
         # Since handling #2 requires renaming on ARTIQ side anyway, it's more straightforward
         # to do it once when embedding (since non-embedded code cannot define classes in
         # functions). Also, easier to debug.
-        n = 0
+        suffix = 0
-        for host_type in self.type_map:
+        new_instance_name = instance_type.name
-            instance_type, constructor_type = self.type_map[host_type]
+        new_constructor_name = constructor_type.name
-            if instance_type.name == new_instance_type.name:
+        while True:
-                n += 1
+            if (new_instance_name not in self.used_instance_type_names
-                new_instance_type.name = "{}.{}".format(new_instance_type.name, n)
+                    and new_constructor_name not in self.used_constructor_type_names):
+                break
+            suffix += 1
+            new_instance_name = f"{instance_type.name}.{suffix}"
+            new_constructor_name = f"{constructor_type.name}.{suffix}"
+
+        self.used_instance_type_names.add(new_instance_name)
+        instance_type.name = new_instance_name
+        self.used_constructor_type_names.add(new_constructor_name)
+        constructor_type.name = new_constructor_name
+
+        self.type_map[host_type] = (instance_type, constructor_type)
+
+    def retrieve_type(self, host_type):
+        return self.type_map[host_type]
+
+    def has_type(self, host_type):
+        return host_type in self.type_map
 
     def attribute_count(self):
         count = 0
@@ -532,7 +552,7 @@ class StitchingASTTypedRewriter(ASTTypedRewriter):
         node = asttyped.QuotedFunctionDefT(
             typing_env=extractor.typing_env, globals_in_scope=extractor.global_,
             signature_type=types.TVar(), return_type=types.TVar(),
-            name=node.name, args=node.args, returns=node.returns,
+            name=node.name, args=node.args, returns=None,
             body=node.body, decorator_list=node.decorator_list,
             keyword_loc=node.keyword_loc, name_loc=node.name_loc,
             arrow_loc=node.arrow_loc, colon_loc=node.colon_loc, at_locs=node.at_locs,
@@ -644,9 +664,9 @@ class StitchingInferencer(Inferencer):
                 if elt.__class__ == float:
                     state |= IS_FLOAT
                 elif elt.__class__ == int:
-                    if -2**31 < elt < 2**31-1:
+                    if -2**31 <= elt <= 2**31-1:
                         state |= IS_INT32
-                    elif -2**63 < elt < 2**63-1:
+                    elif -2**63 <= elt <= 2**63-1:
                         state |= IS_INT64
                     else:
                         state = -1

artiq/compiler/kernel.ld

@@ -33,9 +33,19 @@ SECTIONS
         KEEP(*(.eh_frame_hdr))
     } : text : eh_frame
 
+    .got :
+    {
+        *(.got)
+    } : text
+
+    .got.plt :
+    {
+        *(.got.plt)
+    } : text
+
     .data :
     {
-        *(.data)
+        *(.data .data.*)
     } : data
 
     .dynamic :
@@ -51,6 +61,10 @@ SECTIONS
         _end = .;
     }
 
+    /* Kernel stack grows downward from end of memory, so put guard page after
+     * all the program contents. Note: This requires all loaded sections (at
+     * least those accessed) to be explicitly listed in the above!
+     */
     . = ALIGN(0x1000);
     _sstack_guard = .;
 }

artiq/compiler/math_fns.py

@@ -61,22 +61,6 @@ unary_fp_runtime_calls = [
     ("cbrt", "cbrt"),
 ]
 
-#: float -> float numpy.* math functions lowered to runtime calls.
-unary_fp_runtime_calls = [
-    ("tan", "tan"),
-    ("arcsin", "asin"),
-    ("arccos", "acos"),
-    ("arctan", "atan"),
-    ("sinh", "sinh"),
-    ("cosh", "cosh"),
-    ("tanh", "tanh"),
-    ("arcsinh", "asinh"),
-    ("arccosh", "acosh"),
-    ("arctanh", "atanh"),
-    ("expm1", "expm1"),
-    ("cbrt", "cbrt"),
-]
-
 scipy_special_unary_runtime_calls = [
     ("erf", "erf"),
     ("erfc", "erfc"),

artiq/compiler/targets.py

@@ -263,7 +263,7 @@ class NativeTarget(Target):
     def __init__(self):
         super().__init__()
         self.triple = llvm.get_default_triple()
-        host_data_layout = str(llvm.targets.Target.from_default_triple().create_target_machine().target_data)
+        self.data_layout = str(llvm.targets.Target.from_default_triple().create_target_machine().target_data)
 
 class RV32IMATarget(Target):
     triple = "riscv32-unknown-linux"

artiq/compiler/transforms/int_monomorphizer.py

@@ -14,9 +14,9 @@ class IntMonomorphizer(algorithm.Visitor):
     def visit_NumT(self, node):
         if builtins.is_int(node.type):
             if types.is_var(node.type["width"]):
-                if -2**31 < node.n < 2**31-1:
+                if -2**31 <= node.n <= 2**31-1:
                     width = 32
-                elif -2**63 < node.n < 2**63-1:
+                elif -2**63 <= node.n <= 2**63-1:
                     width = 64
                 else:
                     diag = diagnostic.Diagnostic("error",

artiq/compiler/transforms/llvm_ir_generator.py

@@ -177,6 +177,15 @@ class LLVMIRGenerator:
         self.empty_metadata = self.llmodule.add_metadata([])
         self.quote_fail_msg = None
 
+        # Maximum alignment required according to the target platform ABI. As this is
+        # not directly exposed by LLVM, just take the maximum across all the "big"
+        # elementary types we use. (Vector types, should we ever support them, are
+        # likely contenders for even larger alignment requirements.)
+        self.max_target_alignment = max(map(
+            lambda t: self.abi_layout_info.get_size_align(t)[1],
+            [lli64, lldouble, llptr]
+        ))
+
     def add_pred(self, pred, block):
         if block not in self.llpred_map:
             self.llpred_map[block] = set()
@@ -335,8 +344,8 @@ class LLVMIRGenerator:
             else:
                 value = const.value
 
-            llptr = self.llstr_of_str(const.value, linkage="private", unnamed_addr=True)
+            llptr = self.llstr_of_str(value, linkage="private", unnamed_addr=True)
-            lllen = ll.Constant(lli32, len(const.value))
+            lllen = ll.Constant(lli32, len(value))
             return ll.Constant(llty, (llptr, lllen))
         else:
             assert False
@@ -1529,7 +1538,7 @@ class LLVMIRGenerator:
 
         self.llbuilder.position_at_end(llalloc)
         llalloca = self.llbuilder.alloca(lli8, llsize, name="rpc.alloc")
-        llalloca.align = 4 # maximum alignment required by OR1K ABI
+        llalloca.align = self.max_target_alignment
         llphi.add_incoming(llalloca, llalloc)
         self.llbuilder.branch(llhead)
 

artiq/coredevice/ad53xx.py

@@ -233,7 +233,7 @@ class AD53xx:
     def write_gain_mu(self, channel, gain=0xffff):
         """Program the gain register for a DAC channel.
 
-        The DAC output is not updated until LDAC is pulsed (see :meth load:).
+        The DAC output is not updated until LDAC is pulsed (see :meth:`load`).
         This method advances the timeline by the duration of one SPI transfer.
 
         :param gain: 16-bit gain register value (default: 0xffff)
@@ -245,7 +245,7 @@ class AD53xx:
     def write_offset_mu(self, channel, offset=0x8000):
         """Program the offset register for a DAC channel.
 
-        The DAC output is not updated until LDAC is pulsed (see :meth load:).
+        The DAC output is not updated until LDAC is pulsed (see :meth:`load`).
         This method advances the timeline by the duration of one SPI transfer.
 
         :param offset: 16-bit offset register value (default: 0x8000)
@@ -258,7 +258,7 @@ class AD53xx:
         """Program the DAC offset voltage for a channel.
 
         An offset of +V can be used to trim out a DAC offset error of -V.
-        The DAC output is not updated until LDAC is pulsed (see :meth load:).
+        The DAC output is not updated until LDAC is pulsed (see :meth:`load`).
         This method advances the timeline by the duration of one SPI transfer.
 
         :param voltage: the offset voltage
@@ -270,7 +270,7 @@ class AD53xx:
     def write_dac_mu(self, channel, value):
         """Program the DAC input register for a channel.
 
-        The DAC output is not updated until LDAC is pulsed (see :meth load:).
+        The DAC output is not updated until LDAC is pulsed (see :meth:`load`).
         This method advances the timeline by the duration of one SPI transfer.
         """
         self.bus.write(
@@ -280,7 +280,7 @@ class AD53xx:
     def write_dac(self, channel, voltage):
         """Program the DAC output voltage for a channel.
 
-        The DAC output is not updated until LDAC is pulsed (see :meth load:).
+        The DAC output is not updated until LDAC is pulsed (see :meth:`load`).
         This method advances the timeline by the duration of one SPI transfer.
         """
         self.write_dac_mu(channel, voltage_to_mu(voltage, self.offset_dacs,
@@ -313,7 +313,7 @@ class AD53xx:
 
         If no LDAC device was defined, the LDAC pulse is skipped.
 
-        See :meth load:.
+        See :meth:`load`.
 
         :param values: list of DAC values to program
         :param channels: list of DAC channels to program. If not specified,
@@ -355,7 +355,7 @@ class AD53xx:
         """ Two-point calibration of a DAC channel.
 
         Programs the offset and gain register to trim out DAC errors. Does not
-        take effect until LDAC is pulsed (see :meth load:).
+        take effect until LDAC is pulsed (see :meth:`load`).
 
         Calibration consists of measuring the DAC output voltage for a channel
         with the DAC set to zero-scale (0x0000) and full-scale (0xffff).

artiq/coredevice/adf5356.py

@@ -80,10 +80,11 @@ class ADF5356:
 
         :param blind: Do not attempt to verify presence.
         """
+        self.sync()
         if not blind:
             # MUXOUT = VDD
             self.regs[4] = ADF5356_REG4_MUXOUT_UPDATE(self.regs[4], 1)
-            self.sync()
+            self.write(self.regs[4])
             delay(1000 * us)
             if not self.read_muxout():
                 raise ValueError("MUXOUT not high")
@@ -91,7 +92,7 @@ class ADF5356:
 
             # MUXOUT = DGND
             self.regs[4] = ADF5356_REG4_MUXOUT_UPDATE(self.regs[4], 2)
-            self.sync()
+            self.write(self.regs[4])
             delay(1000 * us)
             if self.read_muxout():
                 raise ValueError("MUXOUT not low")
@@ -99,8 +100,7 @@ class ADF5356:
 
             # MUXOUT = digital lock-detect
             self.regs[4] = ADF5356_REG4_MUXOUT_UPDATE(self.regs[4], 6)
-        else:
+            self.write(self.regs[4])
-            self.sync()
 
     @kernel
     def set_att(self, att):

artiq/coredevice/comm_analyzer.py

@@ -102,15 +102,15 @@ def decode_dump(data):
     # messages are big endian
     parts = struct.unpack(endian + "IQbbb", data[:15])
     (sent_bytes, total_byte_count,
-     error_occured, log_channel, dds_onehot_sel) = parts
+     error_occurred, log_channel, dds_onehot_sel) = parts
 
     expected_len = sent_bytes + 15
     if expected_len != len(data):
         raise ValueError("analyzer dump has incorrect length "
                          "(got {}, expected {})".format(
                             len(data), expected_len))
-    if error_occured:
+    if error_occurred:
-        logger.warning("error occured within the analyzer, "
+        logger.warning("error occurred within the analyzer, "
                        "data may be corrupted")
     if total_byte_count > sent_bytes:
         logger.info("analyzer ring buffer has wrapped %d times",

artiq/coredevice/comm_kernel.py

@@ -3,6 +3,7 @@ import logging
 import traceback
 import numpy
 import socket
+import builtins
 from enum import Enum
 from fractions import Fraction
 from collections import namedtuple
@@ -449,12 +450,12 @@ class CommKernel:
             self._write_bool(value)
         elif tag == "i":
             check(isinstance(value, (int, numpy.int32)) and
-                  (-2**31 <= value < 2**31),
+                  (-2**31 <= value <= 2**31-1),
                   lambda: "32-bit int")
             self._write_int32(value)
         elif tag == "I":
             check(isinstance(value, (int, numpy.int32, numpy.int64)) and
-                  (-2**63 <= value < 2**63),
+                  (-2**63 <= value <= 2**63-1),
                   lambda: "64-bit int")
             self._write_int64(value)
         elif tag == "f":
@@ -463,8 +464,8 @@ class CommKernel:
             self._write_float64(value)
         elif tag == "F":
             check(isinstance(value, Fraction) and
-                  (-2**63 <= value.numerator < 2**63) and
+                  (-2**63 <= value.numerator <= 2**63-1) and
-                  (-2**63 <= value.denominator < 2**63),
+                  (-2**63 <= value.denominator <= 2**63-1),
                   lambda: "64-bit Fraction")
             self._write_int64(value.numerator)
             self._write_int64(value.denominator)
@@ -600,9 +601,10 @@ class CommKernel:
                 self._write_int32(embedding_map.store_str(function))
             else:
                 exn_type = type(exn)
-                if exn_type in (ZeroDivisionError, ValueError, IndexError, RuntimeError) or \
+                if exn_type in builtins.__dict__.values():
-                        hasattr(exn, "artiq_builtin"):
+                    name = "0:{}".format(exn_type.__qualname__)
-                    name = "0:{}".format(exn_type.__name__)
+                elif hasattr(exn, "artiq_builtin"):
+                    name = "0:{}.{}".format(exn_type.__module__, exn_type.__qualname__)
                 else:
                     exn_id = embedding_map.store_object(exn_type)
                     name = "{}:{}.{}".format(exn_id,
@@ -686,8 +688,14 @@ class CommKernel:
         else:
             python_exn_type = embedding_map.retrieve_object(core_exn.id)
 
-        python_exn = python_exn_type(
+        try:
-            nested_exceptions[-1][1].format(*nested_exceptions[0][2]))
+            python_exn = python_exn_type(
+                nested_exceptions[-1][1].format(*nested_exceptions[0][2]))
+        except Exception as ex:
+            python_exn = RuntimeError(
+                f"Exception type={python_exn_type}, which couldn't be "
+                f"reconstructed ({ex})"
+            )
         python_exn.artiq_core_exception = core_exn
         raise python_exn
 

artiq/coredevice/core.py

@@ -52,6 +52,9 @@ def rtio_get_destination_status(linkno: TInt32) -> TBool:
 def rtio_get_counter() -> TInt64:
     raise NotImplementedError("syscall not simulated")
 
+@syscall
+def test_exception_id_sync(id: TInt32) -> TNone:
+    raise NotImplementedError("syscall not simulated")
 
 class Core:
     """Core device driver.

artiq/coredevice/coredevice_generic.schema.json

@@ -122,7 +122,7 @@
                 },
                 "hw_rev": {
                     "type": "string",
-                    "enum": ["v1.0"]
+                    "enum": ["v1.0", "v1.1"]
                 }
             }
         }
@@ -302,6 +302,12 @@
                         "pll_n": {
                             "type": "integer"
                         },
+                        "pll_en": {
+                            "type": "integer",
+                            "minimum": 0,
+                            "maximum": 1,
+                            "default": 1
+                        },
                         "pll_vco": {
                             "type": "integer"
                         },
@@ -405,6 +411,12 @@
                             "type": "integer",
                             "default": 32
                         },
+                        "pll_en": {
+                            "type": "integer",
+                            "minimum": 0,
+                            "maximum": 1,
+                            "default": 1
+                        },
                         "pll_vco": {
                             "type": "integer"
                         }

artiq/coredevice/exceptions.py

@@ -6,12 +6,26 @@ import os
 from artiq import __artiq_dir__ as artiq_dir
 from artiq.coredevice.runtime import source_loader
 
+"""
+This file provides class definition for all the exceptions declared in `EmbeddingMap` in `artiq.compiler.embedding`
+
+For Python builtin exceptions, use the `builtins` module
+For ARTIQ specific exceptions, inherit from `Exception` class
+"""
 
-ZeroDivisionError = builtins.ZeroDivisionError
-ValueError = builtins.ValueError
-IndexError = builtins.IndexError
-RuntimeError = builtins.RuntimeError
 AssertionError = builtins.AssertionError
+AttributeError = builtins.AttributeError
+IndexError = builtins.IndexError
+IOError = builtins.IOError
+KeyError = builtins.KeyError
+NotImplementedError = builtins.NotImplementedError
+OverflowError = builtins.OverflowError
+RuntimeError = builtins.RuntimeError
+TimeoutError = builtins.TimeoutError
+TypeError = builtins.TypeError
+ValueError = builtins.ValueError
+ZeroDivisionError = builtins.ZeroDivisionError
+OSError = builtins.OSError
 
 
 class CoreException:
@@ -150,13 +164,17 @@ class DMAError(Exception):
 
 class ClockFailure(Exception):
     """Raised when RTIO PLL has lost lock."""
-
+    artiq_builtin = True
 
 class I2CError(Exception):
     """Raised when a I2C transaction fails."""
-    pass
+    artiq_builtin = True
 
 
 class SPIError(Exception):
     """Raised when a SPI transaction fails."""
-    pass
+    artiq_builtin = True
+
+class UnwrapNoneError(Exception):
+    """Raised when unwrapping a none Option."""
+    artiq_builtin = True

artiq/coredevice/i2c.py

@@ -161,6 +161,7 @@ class I2CSwitch:
     @kernel
     def set(self, channel):
         """Enable one channel.
+
         :param channel: channel number (0-7)
         """
         i2c_switch_select(self.busno, self.address >> 1, 1 << channel)

artiq/coredevice/mirny.py

@@ -183,7 +183,7 @@ class Almazny:
     """
     Almazny (High frequency mezzanine board for Mirny)
 
-    :param host_mirny - Mirny device Almazny is connected to
+    :param host_mirny: Mirny device Almazny is connected to
     """
 
     def __init__(self, dmgr, host_mirny):
@@ -223,9 +223,10 @@ class Almazny:
     def set_att(self, channel, att, rf_switch=True):
         """
         Sets attenuators on chosen shift register (channel).
-        :param channel - index of the register [0-3]
+
-        :param att_mu - attenuation setting in dBm [0-31.5]
+        :param channel: index of the register [0-3]
-        :param rf_switch - rf switch (bool)
+        :param att: attenuation setting in dBm [0-31.5]
+        :param rf_switch: rf switch (bool)
         """
         self.set_att_mu(channel, self.att_to_mu(att), rf_switch)
 
@@ -233,9 +234,10 @@ class Almazny:
     def set_att_mu(self, channel, att_mu, rf_switch=True):
         """
         Sets attenuators on chosen shift register (channel).
-        :param channel - index of the register [0-3]
+
-        :param att_mu - attenuation setting in machine units [0-63]
+        :param channel: index of the register [0-3]
-        :param rf_switch - rf switch (bool)
+        :param att_mu: attenuation setting in machine units [0-63]
+        :param rf_switch: rf switch (bool)
         """
         self.channel_sw[channel] = 1 if rf_switch else 0
         self.att_mu[channel] = att_mu
@@ -245,7 +247,8 @@ class Almazny:
     def output_toggle(self, oe):
         """
         Toggles output on all shift registers on or off.
-        :param oe - toggle output enable (bool)
+
+        :param oe: toggle output enable (bool)
         """
         self.output_enable = oe
         cfg_reg = self.mirny_cpld.read_reg(1)

artiq/coredevice/phaser.py

@@ -237,7 +237,7 @@ class Phaser:
 
         for data in self.dac_mmap:
             self.dac_write(data >> 16, data)
-            delay(40*us)
+            delay(120*us)
         self.dac_sync()
         delay(40*us)
 
@@ -616,7 +616,7 @@ class Phaser:
         .. note:: Synchronising the NCO clears the phase-accumulator
         """
         config1f = self.dac_read(0x1f)
-        delay(.1*ms)
+        delay(.4*ms)
         self.dac_write(0x1f, config1f & ~int32(1 << 1))
         self.dac_write(0x1f, config1f | (1 << 1))
 

artiq/dashboard/experiments.py

@@ -268,7 +268,7 @@ class _ExperimentDock(QtWidgets.QMdiSubWindow):
             datetime.setDate(QtCore.QDate.currentDate())
         else:
             datetime.setDateTime(QtCore.QDateTime.fromMSecsSinceEpoch(
-                scheduling["due_date"]*1000))
+                int(scheduling["due_date"]*1000)))
         datetime_en.setChecked(scheduling["due_date"] is not None)
 
         def update_datetime(dt):
@@ -422,8 +422,8 @@ class _ExperimentDock(QtWidgets.QMdiSubWindow):
 
         editor_class = self.manager.get_argument_editor_class(self.expurl)
         self.argeditor = editor_class(self.manager, self, self.expurl)
-        self.argeditor.restore_state(argeditor_state)
         self.layout.addWidget(self.argeditor, 0, 0, 1, 5)
+        self.argeditor.restore_state(argeditor_state)
 
     def contextMenuEvent(self, event):
         menu = QtWidgets.QMenu(self)

artiq/dashboard/moninj.py

@@ -8,8 +8,11 @@ from PyQt5 import QtCore, QtWidgets, QtGui
 from sipyco.sync_struct import Subscriber
 
 from artiq.coredevice.comm_moninj import *
-from artiq.coredevice.ad9910 import _AD9910_REG_PROFILE0, _AD9910_REG_PROFILE7, _AD9910_REG_FTW
+from artiq.coredevice.ad9910 import (
-from artiq.coredevice.ad9912_reg import AD9912_POW1
+    _AD9910_REG_PROFILE0, _AD9910_REG_PROFILE7, 
+    _AD9910_REG_FTW, _AD9910_REG_CFR1
+)
+from artiq.coredevice.ad9912_reg import AD9912_POW1, AD9912_SER_CONF
 from artiq.gui.tools import LayoutWidget
 from artiq.gui.flowlayout import FlowLayout
 
@@ -311,6 +314,10 @@ class _DDSWidget(QtWidgets.QFrame):
         apply.clicked.connect(self.apply_changes)
         if self.dds_model.is_urukul:
             off_btn.clicked.connect(self.off_clicked)
+            off_btn.setToolTip(textwrap.dedent(
+                """Note: If TTL RTIO sw for the channel is switched high,
+                this button will not disable the channel.
+                Use the TTL override instead."""))
         self.value_edit.returnPressed.connect(lambda: self.apply_changes(None))
         self.value_edit.escapePressedConnect(self.cancel_changes)
         cancel.clicked.connect(self.cancel_changes)
@@ -534,7 +541,7 @@ class _DeviceManager:
             "log_level": logging.WARNING,
             "content": content,
             "class_name": class_name,
-            "arguments": []
+            "arguments": {}
         }
         scheduling = {
             "pipeline_name": "main",
@@ -549,33 +556,55 @@ class _DeviceManager:
             scheduling["flush"])
         logger.info("Submitted '%s', RID is %d", title, rid)
 
-    def dds_set_frequency(self, dds_channel, dds_model, freq):
+    def _dds_faux_injection(self, dds_channel, dds_model, action, title, log_msg):
         # create kernel and fill it in and send-by-content
+
+        # initialize CPLD (if applicable)
         if dds_model.is_urukul:
             # urukuls need CPLD init and switch to on
-            # keep previous config if it was set already
             cpld_dev = """self.setattr_device("core_cache")
                 self.setattr_device("{}")""".format(dds_model.cpld)
-            cpld_init = """cfg = self.core_cache.get("_{cpld}_cfg")
+
-                if len(cfg) > 0:
+            # `sta`/`rf_sw`` variables are guaranteed for urukuls 
-                    self.{cpld}.cfg_reg = cfg[0]
+            # so {action} can use it
-                else:
+            # if there's no RF enabled, CPLD may have not been initialized
+            # but if there is, it has been initialised - no need to do again
+            cpld_init = """delay(15*ms)
+                was_init = self.core_cache.get("_{cpld}_init")
+                sta = self.{cpld}.sta_read()
+                rf_sw = urukul_sta_rf_sw(sta)
+                if rf_sw == 0 and len(was_init) == 0:
                     delay(15*ms)
                     self.{cpld}.init()
-                    self.core_cache.put("_{cpld}_cfg", [self.{cpld}.cfg_reg])
+                    self.core_cache.put("_{cpld}_init", [1])
-                    cfg = self.core_cache.get("_{cpld}_cfg")
             """.format(cpld=dds_model.cpld)
-            cfg_sw = """self.{}.cfg_sw(True)
-                cfg[0] = self.{}.cfg_reg
-            """.format(dds_channel, dds_model.cpld)
         else:
             cpld_dev = ""
             cpld_init = ""
-            cfg_sw = ""
+
+        # AD9912/9910: init channel (if uninitialized)
+        if dds_model.dds_type == "AD9912":
+            # 0xFF before init, 0x99 after
+            channel_init = """
+                if self.{dds_channel}.read({cfgreg}, length=1) == 0xFF:
+                    delay(10*ms)
+                    self.{dds_channel}.init()
+            """.format(dds_channel=dds_channel, cfgreg=AD9912_SER_CONF)
+        elif dds_model.dds_type == "AD9910":
+            # -1 before init, 2 after
+            channel_init = """
+                if self.{dds_channel}.read32({cfgreg}) == -1:
+                    delay(10*ms)
+                    self.{dds_channel}.init()
+            """.format(dds_channel=dds_channel, cfgreg=AD9912_SER_CONF)
+        else:
+            channel_init = "self.{dds_channel}.init()".format(dds_channel=dds_channel)
+
         dds_exp = textwrap.dedent("""
         from artiq.experiment import *
+        from artiq.coredevice.urukul import *
 
-        class SetDDS(EnvExperiment):
+        class {title}(EnvExperiment):
             def build(self):
                 self.setattr_device("core")
                 self.setattr_device("{dds_channel}")
@@ -583,55 +612,57 @@ class _DeviceManager:
                 
             @kernel
             def run(self):
-                self.core.reset()
+                self.core.break_realtime()
                 {cpld_init}
-                delay(5*ms)
+                delay(10*ms)
-                self.{dds_channel}.init()
+                {channel_init}
-                self.{dds_channel}.set({freq})
+                delay(15*ms)
-                {cfg_sw}
+                {action}
-        """.format(dds_channel=dds_channel, freq=freq,
+        """.format(title=title, action=action,
+                   dds_channel=dds_channel,
                    cpld_dev=cpld_dev, cpld_init=cpld_init,
-                   cfg_sw=cfg_sw))
+                   channel_init=channel_init))
         asyncio.ensure_future(
             self._submit_by_content(
                 dds_exp, 
-                "SetDDS", 
+                title, 
-                "Set DDS {} {}MHz".format(dds_channel, freq/1e6)))
+                log_msg))
+
+    def dds_set_frequency(self, dds_channel, dds_model, freq):
+        action = "self.{ch}.set({freq})".format(
+            freq=freq, ch=dds_channel)
+        if dds_model.is_urukul:
+            action += """
+                ch_no = self.{ch}.chip_select - 4
+                self.{cpld}.cfg_switches(rf_sw | 1 << ch_no)
+            """.format(ch=dds_channel, cpld=dds_model.cpld)
+        self._dds_faux_injection(
+            dds_channel,
+            dds_model,
+            action,
+            "SetDDS", 
+            "Set DDS {} {}MHz".format(dds_channel, freq/1e6))
 
     def dds_channel_toggle(self, dds_channel, dds_model, sw=True):
         # urukul only
-        toggle_exp = textwrap.dedent("""
+        if sw:
-        from artiq.experiment import *
+            switch = "| 1 << ch_no"
-
+        else:
-        class ToggleDDS(EnvExperiment):
+            switch = "& ~(1 << ch_no)"
-            def build(self):
+        action = """
-                self.setattr_device("core")
+                ch_no = self.{dds_channel}.chip_select - 4
-                self.setattr_device("{ch}")
+                self.{cpld}.cfg_switches(rf_sw {switch})
-                self.setattr_device("core_cache")
+        """.format(
-                self.setattr_device("{cpld}")
+            dds_channel=dds_channel,
-                
+            cpld=dds_model.cpld,
-            @kernel
+            switch=switch
-            def run(self):
-                self.core.reset()
-                cfg = self.core_cache.get("_{cpld}_cfg")
-                if len(cfg) > 0:
-                    self.{cpld}.cfg_reg = cfg[0]
-                else:
-                    delay(15*ms)
-                    self.{cpld}.init()
-                    self.core_cache.put("_{cpld}_cfg", [self.{cpld}.cfg_reg])
-                    cfg = self.core_cache.get("_{cpld}_cfg")
-                delay(5*ms)
-                self.{ch}.init()
-                self.{ch}.cfg_sw({sw})
-                cfg[0] = self.{cpld}.cfg_reg
-        """.format(ch=dds_channel, cpld=dds_model.cpld, sw=sw))
-        asyncio.ensure_future(
-            self._submit_by_content(
-                toggle_exp, 
-                "ToggleDDS", 
-                "Toggle DDS {} {}".format(dds_channel, "on" if sw else "off"))
         )
+        self._dds_faux_injection(
+            dds_channel,
+            dds_model,
+            action,
+            "ToggleDDS", 
+            "Toggle DDS {} {}".format(dds_channel, "on" if sw else "off"))
 
     def setup_ttl_monitoring(self, enable, channel):
         if self.mi_connection is not None:
@@ -695,11 +726,11 @@ class _DeviceManager:
                 logger.info("cancelled connection to moninj")
                 break
             except:
-                logger.error("failed to connect to moninj", exc_info=True)
+                logger.error("failed to connect to moninj. Is aqctl_moninj_proxy running?", exc_info=True)
                 await asyncio.sleep(10.)
                 self.reconnect_mi.set()
             else:
-                logger.info("ARTIQ dashboard connected to moninj proxy (%s)",
+                logger.info("ARTIQ dashboard connected to moninj (%s)",
                             self.mi_addr)
                 self.mi_connection = new_mi_connection
                 for ttl_channel in self.ttl_widgets.keys():

artiq/firmware/Cargo.lock

@@ -1,10 +1,42 @@
 # This file is automatically @generated by Cargo.
 # It is not intended for manual editing.
 [[package]]
-name = "aho-corasick"
+name = "addr2line"
-version = "0.7.18"
+version = "0.14.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "1e37cfd5e7657ada45f742d6e99ca5788580b5c529dc78faf11ece6dc702656f"
+checksum = "7c0929d69e78dd9bf5408269919fcbcaeb2e35e5d43e5815517cdc6a8e11a423"
+dependencies = [
+ "cpp_demangle",
+ "fallible-iterator",
+ "gimli",
+ "object",
+ "rustc-demangle",
+ "smallvec",
+]
+
+[[package]]
+name = "adler"
+version = "0.2.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "ee2a4ec343196209d6594e19543ae87a39f96d5534d7174822a3ad825dd6ed7e"
+
+[[package]]
+name = "adler"
+version = "1.0.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f26201604c87b1e01bd3d98f8d5d9a8fcbb815e8cedb41ffccbeb4bf593a35fe"
+
+[[package]]
+name = "ahash"
+version = "0.4.8"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0453232ace82dee0dd0b4c87a59bd90f7b53b314f3e0f61fe2ee7c8a16482289"
+
+[[package]]
+name = "aho-corasick"
+version = "0.7.15"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "7404febffaa47dac81aa44dba71523c9d069b1bdc50a77db41195149e17f68e5"
 dependencies = [
  "memchr",
 ]
@@ -24,9 +56,9 @@ dependencies = [
 
 [[package]]
 name = "bit_field"
-version = "0.10.1"
+version = "0.10.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "dcb6dd1c2376d2e096796e234a70e17e94cc2d5d54ff8ce42b28cef1d0d359a4"
+checksum = "dc827186963e592360843fb5ba4b973e145841266c1357f7180c43526f2e5b61"
 
 [[package]]
 name = "bitflags"
@@ -66,12 +98,26 @@ dependencies = [
 name = "bootloader"
 version = "0.0.0"
 dependencies = [
+ "addr2line",
  "board_misoc",
  "build_misoc",
  "byteorder",
+ "cc",
+ "compiler_builtins",
  "crc",
+ "dlmalloc",
+ "fortanix-sgx-abi",
+ "getopts",
+ "hashbrown",
+ "hermit-abi",
+ "libc 0.2.79",
+ "memchr",
+ "miniz_oxide 0.4.0",
  "riscv",
+ "rustc-demangle",
  "smoltcp",
+ "unicode-width",
+ "wasi",
 ]
 
 [[package]]
@@ -92,9 +138,9 @@ checksum = "14c189c53d098945499cdfa7ecc63567cf3886b3332b312a5b4585d8d3a6a610"
 
 [[package]]
 name = "cc"
-version = "1.0.70"
+version = "1.0.60"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d26a6ce4b6a484fa3edb70f7efa6fc430fd2b87285fe8b84304fd0936faa0dc0"
+checksum = "ef611cc68ff783f18535d77ddd080185275713d852c4f5cbb6122c462a7a825c"
 
 [[package]]
 name = "cfg-if"
@@ -114,6 +160,15 @@ version = "0.1.39"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "3748f82c7d366a0b4950257d19db685d4958d2fa27c6d164a3f069fec42b748b"
 
+[[package]]
+name = "cpp_demangle"
+version = "0.3.5"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "eeaa953eaad386a53111e47172c2fedba671e5684c8dd601a5f474f4f118710f"
+dependencies = [
+ "cfg-if 1.0.0",
+]
+
 [[package]]
 name = "crc"
 version = "1.8.1"
@@ -123,12 +178,30 @@ dependencies = [
  "build_const",
 ]
 
+[[package]]
+name = "crc32fast"
+version = "1.4.2"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a97769d94ddab943e4510d138150169a2758b5ef3eb191a9ee688de3e23ef7b3"
+dependencies = [
+ "cfg-if 1.0.0",
+]
+
 [[package]]
 name = "cslice"
 version = "0.3.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "0f8cb7306107e4b10e64994de6d3274bd08996a7c1322a27b86482392f96be0a"
 
+[[package]]
+name = "dlmalloc"
+version = "0.2.1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "332570860c2edf2d57914987bf9e24835425f75825086b6ba7d1e6a3e4f1f254"
+dependencies = [
+ "libc 0.2.79",
+]
+
 [[package]]
 name = "dyld"
 version = "0.0.0"
@@ -137,7 +210,6 @@ version = "0.0.0"
 name = "eh"
 version = "0.0.0"
 dependencies = [
- "compiler_builtins",
  "cslice",
  "libc 0.1.0",
  "unwind",
@@ -160,12 +232,71 @@ dependencies = [
  "synstructure",
 ]
 
+[[package]]
+name = "fallible-iterator"
+version = "0.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "4443176a9f2c162692bd3d352d745ef9413eec5782a80d8fd6f8a1ac692a07f7"
+
+[[package]]
+name = "flate2"
+version = "1.0.30"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5f54427cfd1c7829e2a139fcefea601bf088ebca651d2bf53ebc600eac295dae"
+dependencies = [
+ "crc32fast",
+ "miniz_oxide 0.7.3",
+]
+
+[[package]]
+name = "fortanix-sgx-abi"
+version = "0.3.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "c56c422ef86062869b2d57ae87270608dc5929969dd130a6e248979cf4fb6ca6"
+
 [[package]]
 name = "fringe"
 version = "1.2.1"
 source = "git+https://git.m-labs.hk/M-Labs/libfringe.git?rev=3ecbe5#3ecbe53f7644b18ee46ebd5b2ca12c9cbceec43a"
 dependencies = [
- "libc 0.2.101",
+ "libc 0.2.79",
+]
+
+[[package]]
+name = "getopts"
+version = "0.2.21"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "14dbbfd5c71d70241ecf9e6f13737f7b5ce823821063188d7e46c41d371eebd5"
+dependencies = [
+ "unicode-width",
+]
+
+[[package]]
+name = "gimli"
+version = "0.23.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "f6503fe142514ca4799d4c26297c4248239fe8838d827db6bd6065c6ed29a6ce"
+dependencies = [
+ "fallible-iterator",
+ "stable_deref_trait",
+]
+
+[[package]]
+name = "hashbrown"
+version = "0.9.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "00d63df3d41950fb462ed38308eea019113ad1508da725bbedcd0fa5a85ef5f7"
+dependencies = [
+ "ahash",
+]
+
+[[package]]
+name = "hermit-abi"
+version = "0.1.17"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "5aca5565f760fb5b220e499d72710ed156fdb74e631659e99377d9ebfbd13ae8"
+dependencies = [
+ "libc 0.2.79",
 ]
 
 [[package]]
@@ -206,9 +337,9 @@ version = "0.1.0"
 
 [[package]]
 name = "libc"
-version = "0.2.101"
+version = "0.2.79"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "3cb00336871be5ed2c8ed44b60ae9959dc5b9f08539422ed43f09e34ecaeba21"
+checksum = "2448f6066e80e3bfc792e9c98bf705b4b0fc6e8ef5b43e5889aff0eaa9c58743"
 
 [[package]]
 name = "log"
@@ -241,16 +372,38 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "c75de51135344a4f8ed3cfe2720dc27736f7711989703a0b43aadf3753c55577"
 
 [[package]]
-name = "managed"
+name = "memchr"
-version = "0.8.0"
+version = "2.3.4"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "0ca88d725a0a943b096803bd34e73a4437208b6077654cc4ecb2947a5f91618d"
+checksum = "0ee1c47aaa256ecabcaea351eae4a9b01ef39ed810004e298d2511ed284b1525"
 
 [[package]]
-name = "memchr"
+name = "miniz_oxide"
-version = "2.4.1"
+version = "0.4.0"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "308cc39be01b73d0d18f82a0e7b2a3df85245f84af96fdddc5d202d27e47b86a"
+checksum = "be0f75932c1f6cfae3c04000e40114adf955636e19040f9c0a2c380702aa1c7f"
+dependencies = [
+ "adler 0.2.3",
+]
+
+[[package]]
+name = "miniz_oxide"
+version = "0.7.3"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "87dfd01fe195c66b572b37921ad8803d010623c0aca821bea2302239d155cdae"
+dependencies = [
+ "adler 1.0.2",
+]
+
+[[package]]
+name = "object"
+version = "0.22.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "8d3b63360ec3cb337817c2dbd47ab4a0f170d285d8e5a2064600f3def1402397"
+dependencies = [
+ "flate2",
+ "wasmparser",
+]
 
 [[package]]
 name = "proto_artiq"
@@ -274,9 +427,9 @@ checksum = "7a6e920b65c65f10b2ae65c831a81a073a89edd28c7cce89475bff467ab4167a"
 
 [[package]]
 name = "regex"
-version = "1.5.4"
+version = "1.4.6"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d07a8629359eb56f1e2fb1652bb04212c072a87ba68546a04065d525673ac461"
+checksum = "2a26af418b574bd56588335b3a3659a65725d4e636eb1016c2f9e3b38c7cc759"
 dependencies = [
  "aho-corasick",
  "memchr",
@@ -285,9 +438,9 @@ dependencies = [
 
 [[package]]
 name = "regex-syntax"
-version = "0.6.25"
+version = "0.6.29"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "f497285884f3fcff424ffc933e56d7cbca511def0c9831a7f9b5f6153e3cc89b"
+checksum = "f162c6dd7b008981e4d40210aca20b4bd0f9b60ca9271061b07f78537722f2e1"
 
 [[package]]
 name = "riscv"
@@ -327,13 +480,19 @@ dependencies = [
  "io",
  "log",
  "logger_artiq",
- "managed 0.7.2",
+ "managed",
  "proto_artiq",
  "riscv",
  "smoltcp",
  "unwind_backtrace",
 ]
 
+[[package]]
+name = "rustc-demangle"
+version = "0.1.18"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "6e3bad0ee36814ca07d7968269dd4b7ec89ec2da10c4bb613928d3077083c232"
+
 [[package]]
 name = "rustc_version"
 version = "0.2.3"
@@ -370,16 +529,28 @@ source = "registry+https://github.com/rust-lang/crates.io-index"
 checksum = "388a1df253eca08550bef6c72392cfe7c30914bf41df5269b68cbd6ff8f570a3"
 
 [[package]]
-name = "smoltcp"
+name = "smallvec"
-version = "0.8.0"
+version = "1.13.2"
 source = "registry+https://github.com/rust-lang/crates.io-index"
-checksum = "d2308a1657c8db1f5b4993bab4e620bdbe5623bd81f254cf60326767bb243237"
+checksum = "3c5e1a9a646d36c3599cd173a41282daf47c44583ad367b8e6837255952e5c67"
+
+[[package]]
+name = "smoltcp"
+version = "0.6.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "0fe46639fd2ec79eadf8fe719f237a7a0bd4dac5d957f1ca5bbdbc1c3c39e53a"
 dependencies = [
  "bitflags",
  "byteorder",
- "managed 0.8.0",
+ "managed",
 ]
 
+[[package]]
+name = "stable_deref_trait"
+version = "1.2.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "a8f112729512f8e442d81f95a8a7ddf2b7c6b8a1a6f509a95864142b30cab2d3"
+
 [[package]]
 name = "syn"
 version = "0.11.11"
@@ -410,6 +581,12 @@ dependencies = [
  "syn",
 ]
 
+[[package]]
+name = "unicode-width"
+version = "0.1.8"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "9337591893a19b88d8d87f2cec1e73fad5cdfd10e5a6f349f498ad6ea2ffb1e3"
+
 [[package]]
 name = "unicode-xid"
 version = "0.0.4"
@@ -431,3 +608,15 @@ dependencies = [
  "libc 0.1.0",
  "unwind",
 ]
+
+[[package]]
+name = "wasi"
+version = "0.9.0+wasi-snapshot-preview1"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "cccddf32554fecc6acb585f82a32a72e28b48f8c4c1883ddfeeeaa96f7d8e519"
+
+[[package]]
+name = "wasmparser"
+version = "0.57.0"
+source = "registry+https://github.com/rust-lang/crates.io-index"
+checksum = "32fddd575d477c6e9702484139cf9f23dcd554b06d185ed0f56c857dd3a47aa6"

artiq/firmware/bootloader/Cargo.toml

@@ -13,8 +13,25 @@ path = "main.rs"
 build_misoc = { path = "../libbuild_misoc" }
 
 [dependencies]
-byteorder = { version = "1.0", default-features = false }
+byteorder = { version = "=1.4.3", default-features = false }
 crc = { version = "1.7", default-features = false }
 board_misoc = { path = "../libboard_misoc", features = ["uart_console", "smoltcp"] }
-smoltcp = { version = "0.8.0", default-features = false, features = ["medium-ethernet", "proto-ipv4", "proto-ipv6", "socket-tcp"] }
+smoltcp = { version = "0.6.0", default-features = false, features = ["ethernet", "proto-ipv4", "proto-ipv6", "socket-tcp"] }
 riscv = { version = "0.6.0", features = ["inline-asm"] }
+
+# insanity required by using cargo build-std over xbuild with nix
+[dev-dependencies]
+getopts = "=0.2.21"
+libc = "=0.2.79"
+unicode-width = "=0.1.8"
+addr2line = "=0.14.0"
+memchr = "=2.3.4"
+hashbrown = "=0.9.0"
+miniz_oxide = "=0.4.0"
+rustc-demangle = "=0.1.18"
+hermit-abi = "=0.1.17"
+dlmalloc = "=0.2.1"
+wasi = "=0.9.0"
+fortanix-sgx-abi = "=0.3.3"
+cc = "=1.0.60"
+compiler_builtins = "=0.1.39"

artiq/firmware/bootloader/Makefile

@@ -3,8 +3,6 @@ include $(MISOC_DIRECTORY)/software/common.mak
 
 RUSTFLAGS += -Cpanic=abort
 
-export XBUILD_SYSROOT_PATH=$(BUILDINC_DIRECTORY)/../sysroot
-
 all:: bootloader.bin
 
 .PHONY: $(RUSTOUT)/libbootloader.a

artiq/firmware/bootloader/main.rs

@@ -18,8 +18,6 @@ use board_misoc::slave_fpga;
 use board_misoc::{clock, ethmac, net_settings};
 use board_misoc::uart_console::Console;
 use riscv::register::{mcause, mepc, mtval};
-use smoltcp::iface::SocketStorage;
-use smoltcp::wire::{HardwareAddress, IpAddress, Ipv4Address};
 
 fn check_integrity() -> bool {
     extern {
@@ -398,9 +396,6 @@ fn network_boot() {
 
     println!("Initializing network...");
 
-    // Assuming only one socket is ever needed by the bootloader.
-    // The smoltcp reuses the listening socket when the connection is established.
-    let mut sockets = [SocketStorage::EMPTY];
     let mut net_device = unsafe { ethmac::EthernetDevice::new() };
     net_device.reset_phy_if_any();
 
@@ -410,25 +405,22 @@ fn network_boot() {
     let net_addresses = net_settings::get_adresses();
     println!("Network addresses: {}", net_addresses);
     let mut ip_addrs = [
-        IpCidr::new(IpAddress::Ipv4(Ipv4Address::UNSPECIFIED), 0),
+        IpCidr::new(net_addresses.ipv4_addr, 0),
         IpCidr::new(net_addresses.ipv6_ll_addr, 0),
         IpCidr::new(net_addresses.ipv6_ll_addr, 0)
     ];
-    if let net_settings::Ipv4AddrConfig::Static(ipv4) = net_addresses.ipv4_addr {
-        ip_addrs[0] = IpCidr::new(IpAddress::Ipv4(ipv4), 0);
-    }
     let mut interface = match net_addresses.ipv6_addr {
         Some(addr) => {
             ip_addrs[2] = IpCidr::new(addr, 0);
-            smoltcp::iface::InterfaceBuilder::new(net_device, &mut sockets[..])
+            smoltcp::iface::EthernetInterfaceBuilder::new(net_device)
-                       .hardware_addr(HardwareAddress::Ethernet(net_addresses.hardware_addr))
+                       .ethernet_addr(net_addresses.hardware_addr)
                        .ip_addrs(&mut ip_addrs[..])
                        .neighbor_cache(neighbor_cache)
                        .finalize()
         }
         None =>
-            smoltcp::iface::InterfaceBuilder::new(net_device, &mut sockets[..])
+            smoltcp::iface::EthernetInterfaceBuilder::new(net_device)
-                       .hardware_addr(HardwareAddress::Ethernet(net_addresses.hardware_addr))
+                       .ethernet_addr(net_addresses.hardware_addr)
                        .ip_addrs(&mut ip_addrs[..2])
                        .neighbor_cache(neighbor_cache)
                        .finalize()
@@ -437,10 +429,14 @@ fn network_boot() {
     let mut rx_storage = [0; 4096];
     let mut tx_storage = [0; 128];
 
+    let mut socket_set_entries: [_; 1] = Default::default();
+    let mut sockets =
+        smoltcp::socket::SocketSet::new(&mut socket_set_entries[..]);
+
     let tcp_rx_buffer = smoltcp::socket::TcpSocketBuffer::new(&mut rx_storage[..]);
     let tcp_tx_buffer = smoltcp::socket::TcpSocketBuffer::new(&mut tx_storage[..]);
     let tcp_socket = smoltcp::socket::TcpSocket::new(tcp_rx_buffer, tcp_tx_buffer);
-    let tcp_handle = interface.add_socket(tcp_socket);
+    let tcp_handle = sockets.add(tcp_socket);
 
     let mut net_conn = NetConn::new();
     let mut boot_time = None;
@@ -450,7 +446,7 @@ fn network_boot() {
     loop {
         let timestamp = clock::get_ms() as i64;
         {
-            let socket = &mut *interface.get_socket::<smoltcp::socket::TcpSocket>(tcp_handle);
+            let socket = &mut *sockets.get::<smoltcp::socket::TcpSocket>(tcp_handle);
 
             match boot_time {
                 None => {
@@ -479,7 +475,7 @@ fn network_boot() {
             }
         }
 
-        match interface.poll(smoltcp::time::Instant::from_millis(timestamp)) {
+        match interface.poll(&mut sockets, smoltcp::time::Instant::from_millis(timestamp)) {
             Ok(_) => (),
             Err(smoltcp::Error::Unrecognized) => (),
             Err(err) => println!("Network error: {}", err)

artiq/firmware/ksupport/Makefile

@@ -14,8 +14,6 @@ LDFLAGS += --eh-frame-hdr \
 
 RUSTFLAGS += -Cpanic=unwind
 
-export XBUILD_SYSROOT_PATH=$(BUILDINC_DIRECTORY)/../sysroot
-
 all:: ksupport.elf
 
 .PHONY: $(RUSTOUT)/libksupport.a
@@ -26,7 +24,7 @@ $(RUSTOUT)/libksupport.a:
 
 ksupport.elf: $(RUSTOUT)/libksupport.a glue.o
 	$(link) -T $(KSUPPORT_DIRECTORY)/ksupport.ld \
-		-lunwind-$(CPU)-elf -lprintf-float -lm
+		-lunwind-$(CPU)-libc -lprintf-float -lm
 
 %.o: $(KSUPPORT_DIRECTORY)/%.c
 	$(compile)

artiq/firmware/ksupport/api.rs

@@ -167,4 +167,12 @@ static mut API: &'static [(&'static str, *const ())] = &[
     api!(spi_set_config = ::nrt_bus::spi::set_config),
     api!(spi_write = ::nrt_bus::spi::write),
     api!(spi_read = ::nrt_bus::spi::read),
+
+    /*
+     * syscall for unit tests
+     * Used in `artiq.tests.coredevice.test_exceptions.ExceptionTest.test_raise_exceptions_kernel`
+     * This syscall checks that the exception IDs used in the Python `EmbeddingMap` (in `artiq.compiler.embedding`)
+     * match the `EXCEPTION_ID_LOOKUP` defined in the firmware (`artiq::firmware::ksupport::eh_artiq`)
+     */
+    api!(test_exception_id_sync = ::eh_artiq::test_exception_id_sync)
 ];

artiq/firmware/ksupport/eh_artiq.rs

@@ -333,6 +333,7 @@ extern fn stop_fn(_version: c_int,
     }
 }
 
+// Must be kept in sync with `artiq.compiler.embedding`
 static EXCEPTION_ID_LOOKUP: [(&str, u32); 11] = [
     ("RuntimeError", 0),
     ("RTIOUnderflow", 1),
@@ -356,3 +357,30 @@ pub fn get_exception_id(name: &str) -> u32 {
     unimplemented!("unallocated internal exception id")
 }
 
+/// Takes as input exception id from host
+/// Generates a new exception with:
+///   * `id` set to `exn_id`
+///   * `message` set to corresponding exception name from `EXCEPTION_ID_LOOKUP`
+///
+/// The message is matched on host to ensure correct exception is being referred 
+/// This test checks the synchronization of exception ids for runtime errors
+#[no_mangle]
+#[unwind(allowed)]
+pub extern fn test_exception_id_sync(exn_id: u32) {
+    let message = EXCEPTION_ID_LOOKUP
+        .iter()
+        .find_map(|&(name, id)| if id == exn_id { Some(name) } else { None })
+        .unwrap_or("unallocated internal exception id");
+    
+    let exn = Exception {
+        id:       exn_id,
+        file:     file!().as_c_slice(),
+        line:     0,
+        column:   0,
+        function: "test_exception_id_sync".as_c_slice(),
+        message:  message.as_c_slice(),
+        param:    [0, 0, 0]
+    };
+    unsafe { raise(&exn) };
+}
+

artiq/firmware/ksupport/ksupport.ld

@@ -60,6 +60,11 @@ SECTIONS
         KEEP(*(.eh_frame_hdr))
     } > ksupport :text :eh_frame
 
+    .gcc_except_table :
+    {
+        *(.gcc_except_table)
+    } > ksupport
+
     .data :
     {
         *(.data .data.*)

artiq/firmware/ksupport/lib.rs

@@ -156,6 +156,21 @@ extern fn rpc_send_async(service: u32, tag: &CSlice<u8>, data: *const *const ())
     })
 }
 
+
+/// Receives the result from an RPC call into the given memory buffer.
+///
+/// To handle aggregate objects with an a priori unknown size and number of
+/// sub-allocations (e.g. a list of list of lists, where, at each level, the number of
+/// elements is not statically known), this function needs to be called in a loop:
+///
+/// On the first call, `slot` should be a buffer of suitable size and alignment for
+/// the top-level return value (e.g. in the case of a list, the pointer/length pair).
+/// A return value of zero indicates that the value has been completely received.
+/// As long as the return value is positive, another allocation with the given number of
+/// bytes is needed, so the function should be called again with such a buffer (aligned
+/// to the maximum required for any of the possible types according to the target ABI).
+///
+/// If the RPC call resulted in an exception, it is reconstructed and raised.
 #[unwind(allowed)]
 extern fn rpc_recv(slot: *mut ()) -> usize {
     send(&RpcRecvRequest(slot));
@@ -327,7 +342,7 @@ extern fn dma_record_output(target: i32, word: i32) {
 }
 
 #[unwind(aborts)]
-extern fn dma_record_output_wide(target: i32, words: CSlice<i32>) {
+extern fn dma_record_output_wide(target: i32, words: &CSlice<i32>) {
     assert!(words.len() <= 16); // enforce the hardware limit
 
     unsafe {

artiq/firmware/ksupport/rtio.rs

@@ -89,7 +89,7 @@ mod imp {
         }
     }
 
-    pub extern fn output_wide(target: i32, data: CSlice<i32>) {
+    pub extern fn output_wide(target: i32, data: &CSlice<i32>) {
         unsafe {
             csr::rtio::target_write(target as u32);
             // writing target clears o_data
@@ -235,7 +235,7 @@ mod imp {
         unimplemented!("not(has_rtio)")
     }
 
-    pub extern fn output_wide(_target: i32, _data: CSlice<i32>) {
+    pub extern fn output_wide(_target: i32, _data: &CSlice<i32>) {
         unimplemented!("not(has_rtio)")
     }
 

artiq/firmware/libboard_artiq/lib.rs

@@ -22,8 +22,6 @@ pub mod rpc_queue;
 
 #[cfg(has_si5324)]
 pub mod si5324;
-#[cfg(has_wrpll)]
-pub mod wrpll;
 
 #[cfg(has_hmc830_7043)]
 pub mod hmc830_7043;

artiq/firmware/libboard_artiq/si5324.rs

@@ -28,7 +28,7 @@ pub struct FrequencySettings {
     pub n31: u32,
     pub n32: u32,
     pub bwsel: u8,
-    pub crystal_ref: bool
+    pub crystal_as_ckin2: bool
 }
 
 pub enum Input {
@@ -83,7 +83,7 @@ fn map_frequency_settings(settings: &FrequencySettings) -> Result<FrequencySetti
         n31: settings.n31 - 1,
         n32: settings.n32 - 1,
         bwsel: settings.bwsel,
-        crystal_ref: settings.crystal_ref
+        crystal_as_ckin2: settings.crystal_as_ckin2
     };
     Ok(r)
 }
@@ -216,13 +216,14 @@ pub fn bypass(input: Input) -> Result<()> {
 
 pub fn setup(settings: &FrequencySettings, input: Input) -> Result<()> {
     let s = map_frequency_settings(settings)?;
+
     let cksel_reg = match input {
         Input::Ckin1 => 0b00,
         Input::Ckin2 => 0b01,
     };
 
     init()?;
-    if settings.crystal_ref {
+    if settings.crystal_as_ckin2 {
         write(0,   read(0)? | 0x40)?;                     // FREE_RUN=1
     }
     write(2,   (read(2)? & 0x0f) | (s.bwsel << 4))?;

artiq/firmware/libboard_artiq/wrpll.rs

@@ -1,538 +0,0 @@
-use board_misoc::{csr, clock};
-
-mod i2c {
-    use board_misoc::{csr, clock};
-
-    #[derive(Debug, Clone, Copy)]
-    pub enum Dcxo {
-        Main,
-        Helper
-    }
-
-    fn half_period() { clock::spin_us(1) }
-    const SDA_MASK: u8 = 2;
-    const SCL_MASK: u8 = 1;
-
-    fn sda_i(dcxo: Dcxo) -> bool {
-        let reg = match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_in_read() },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_in_read() },
-        };
-        reg & SDA_MASK != 0
-    }
-
-    fn sda_oe(dcxo: Dcxo, oe: bool) {
-        let reg = match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_read() },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_read() },
-        };
-        let reg = if oe { reg | SDA_MASK } else { reg & !SDA_MASK };
-        match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_write(reg) },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_write(reg) }
-        }
-    }
-
-    fn sda_o(dcxo: Dcxo, o: bool) {
-        let reg = match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_read() },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_read() },
-        };
-        let reg = if o  { reg | SDA_MASK } else { reg & !SDA_MASK };
-        match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_write(reg) },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_write(reg) }
-        }
-    }
-
-    fn scl_oe(dcxo: Dcxo, oe: bool) {
-        let reg = match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_read() },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_read() },
-        };
-        let reg = if oe { reg | SCL_MASK } else { reg & !SCL_MASK };
-        match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_oe_write(reg) },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_oe_write(reg) }
-        }
-    }
-
-    fn scl_o(dcxo: Dcxo, o: bool) {
-        let reg = match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_read() },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_read() },
-        };
-        let reg = if o  { reg | SCL_MASK } else { reg & !SCL_MASK };
-        match dcxo {
-            Dcxo::Main => unsafe { csr::wrpll::main_dcxo_gpio_out_write(reg) },
-            Dcxo::Helper => unsafe { csr::wrpll::helper_dcxo_gpio_out_write(reg) }
-        }
-    }
-
-    pub fn init(dcxo: Dcxo) -> Result<(), &'static str> {
-        // Set SCL as output, and high level
-        scl_o(dcxo, true);
-        scl_oe(dcxo, true);
-        // Prepare a zero level on SDA so that sda_oe pulls it down
-        sda_o(dcxo, false);
-        // Release SDA
-        sda_oe(dcxo, false);
-
-        // Check the I2C bus is ready
-        half_period();
-        half_period();
-        if !sda_i(dcxo) {
-            // Try toggling SCL a few times
-            for _bit in 0..8 {
-                scl_o(dcxo, false);
-                half_period();
-                scl_o(dcxo, true);
-                half_period();
-            }
-        }
-
-        if !sda_i(dcxo) {
-            return Err("SDA is stuck low and doesn't get unstuck");
-        }
-        Ok(())
-    }
-
-    pub fn start(dcxo: Dcxo) {
-        // Set SCL high then SDA low
-        scl_o(dcxo, true);
-        half_period();
-        sda_oe(dcxo, true);
-        half_period();
-    }
-
-    pub fn stop(dcxo: Dcxo) {
-        // First, make sure SCL is low, so that the target releases the SDA line
-        scl_o(dcxo, false);
-        half_period();
-        // Set SCL high then SDA high
-        sda_oe(dcxo, true);
-        scl_o(dcxo, true);
-        half_period();
-        sda_oe(dcxo, false);
-        half_period();
-    }
-
-    pub fn write(dcxo: Dcxo, data: u8) -> bool {
-        // MSB first
-        for bit in (0..8).rev() {
-            // Set SCL low and set our bit on SDA
-            scl_o(dcxo, false);
-            sda_oe(dcxo, data & (1 << bit) == 0);
-            half_period();
-            // Set SCL high ; data is shifted on the rising edge of SCL
-            scl_o(dcxo, true);
-            half_period();
-        }
-        // Check ack
-        // Set SCL low, then release SDA so that the I2C target can respond
-        scl_o(dcxo, false);
-        half_period();
-        sda_oe(dcxo, false);
-        // Set SCL high and check for ack
-        scl_o(dcxo, true);
-        half_period();
-        // returns true if acked (I2C target pulled SDA low)
-        !sda_i(dcxo)
-    }
-
-    pub fn read(dcxo: Dcxo, ack: bool) -> u8 {
-        // Set SCL low first, otherwise setting SDA as input may cause a transition
-        // on SDA with SCL high which will be interpreted as START/STOP condition.
-        scl_o(dcxo, false);
-        half_period(); // make sure SCL has settled low
-        sda_oe(dcxo, false);
-
-        let mut data: u8 = 0;
-
-        // MSB first
-        for bit in (0..8).rev() {
-            scl_o(dcxo, false);
-            half_period();
-            // Set SCL high and shift data
-            scl_o(dcxo, true);
-            half_period();
-            if sda_i(dcxo) { data |= 1 << bit }
-        }
-        // Send ack
-        // Set SCL low and pull SDA low when acking
-        scl_o(dcxo, false);
-        if ack { sda_oe(dcxo, true) }
-        half_period();
-        // then set SCL high
-        scl_o(dcxo, true);
-        half_period();
-
-        data
-    }
-}
-
-mod si549 {
-    use board_misoc::clock;
-    use super::i2c;
-
-    #[cfg(any(soc_platform = "metlino", soc_platform = "sayma_amc", soc_platform = "sayma_rtm"))]
-    pub const ADDRESS: u8 = 0x55;
-    #[cfg(soc_platform = "kasli")]
-    pub const ADDRESS: u8 = 0x67;
-
-    pub fn write(dcxo: i2c::Dcxo, reg: u8, val: u8) -> Result<(), &'static str> {
-        i2c::start(dcxo);
-        if !i2c::write(dcxo, ADDRESS << 1) {
-            return Err("Si549 failed to ack write address")
-        }
-        if !i2c::write(dcxo, reg) {
-            return Err("Si549 failed to ack register")
-        }
-        if !i2c::write(dcxo, val) {
-            return Err("Si549 failed to ack value")
-        }
-        i2c::stop(dcxo);
-        Ok(())
-    }
-
-    pub fn write_no_ack_value(dcxo: i2c::Dcxo, reg: u8, val: u8) -> Result<(), &'static str> {
-        i2c::start(dcxo);
-        if !i2c::write(dcxo, ADDRESS << 1) {
-            return Err("Si549 failed to ack write address")
-        }
-        if !i2c::write(dcxo, reg) {
-            return Err("Si549 failed to ack register")
-        }
-        i2c::write(dcxo, val);
-        i2c::stop(dcxo);
-        Ok(())
-    }
-
-    pub fn read(dcxo: i2c::Dcxo, reg: u8) -> Result<u8, &'static str> {
-        i2c::start(dcxo);
-        if !i2c::write(dcxo, ADDRESS << 1) {
-            return Err("Si549 failed to ack write address")
-        }
-        if !i2c::write(dcxo, reg) {
-            return Err("Si549 failed to ack register")
-        }
-        i2c::stop(dcxo);
-
-        i2c::start(dcxo);
-        if !i2c::write(dcxo, (ADDRESS << 1) | 1) {
-            return Err("Si549 failed to ack read address")
-        }
-        let val = i2c::read(dcxo, false);
-        i2c::stop(dcxo);
-
-        Ok(val)
-    }
-
-    pub fn program(dcxo: i2c::Dcxo, hsdiv: u16, lsdiv: u8, fbdiv: u64) -> Result<(), &'static str> {
-        i2c::init(dcxo)?;
-
-        write(dcxo, 255, 0x00)?;  // PAGE
-        write_no_ack_value(dcxo, 7, 0x80)?;  // RESET
-        clock::spin_us(100_000);  // required? not specified in datasheet.
-
-        write(dcxo, 255, 0x00)?;  // PAGE
-        write(dcxo, 69,  0x00)?;  // Disable FCAL override.
-                                  // Note: Value 0x00 from Table 5.6 is inconsistent with Table 5.7,
-                                  // which shows bit 0 as reserved and =1.
-        write(dcxo, 17,  0x00)?;  // Synchronously disable output
-
-        // The Si549 has no ID register, so we check that it responds correctly
-        // by writing values to a RAM-like register and reading them back.
-        for test_value in 0..255 {
-            write(dcxo, 23, test_value)?;
-            let readback = read(dcxo, 23)?;
-            if readback != test_value {
-                return Err("Si549 detection failed");
-            }
-        }
-
-        write(dcxo, 23,  hsdiv as u8)?;
-        write(dcxo, 24,  (hsdiv >> 8) as u8 | (lsdiv << 4))?;
-        write(dcxo, 26,  fbdiv as u8)?;
-        write(dcxo, 27,  (fbdiv >> 8) as u8)?;
-        write(dcxo, 28,  (fbdiv >> 16) as u8)?;
-        write(dcxo, 29,  (fbdiv >> 24) as u8)?;
-        write(dcxo, 30,  (fbdiv >> 32) as u8)?;
-        write(dcxo, 31,  (fbdiv >> 40) as u8)?;
-
-        write(dcxo, 7,   0x08)?;  // Start FCAL
-        write(dcxo, 17,  0x01)?;  // Synchronously enable output
-
-        Ok(())
-    }
-
-    // Si549 digital frequency trim ("all-digital PLL" register)
-    // ∆ f_out = adpll * 0.0001164e-6 (0.1164 ppb/lsb)
-    // max trim range is +- 950 ppm
-    pub fn set_adpll(dcxo: i2c::Dcxo, adpll: i32) -> Result<(), &'static str> {
-        write(dcxo, 231, adpll as u8)?;
-        write(dcxo, 232, (adpll >> 8) as u8)?;
-        write(dcxo, 233, (adpll >> 16) as u8)?;
-        clock::spin_us(100);
-        Ok(())
-    }
-
-    pub fn get_adpll(dcxo: i2c::Dcxo) -> Result<i32, &'static str> {
-        let b1 = read(dcxo, 231)? as i32;
-        let b2 = read(dcxo, 232)? as i32;
-        let b3 = read(dcxo, 233)? as i8 as i32;
-        Ok(b3 << 16 | b2 << 8 | b1)
-    }
-}
-
-// to do: load from gateware config
-const DDMTD_COUNTER_N: u32 = 15;
-const DDMTD_COUNTER_M: u32 = (1 << DDMTD_COUNTER_N);
-const F_SYS: f64 = csr::CONFIG_CLOCK_FREQUENCY as f64;
-
-const F_MAIN: f64 = 125.0e6;
-const F_HELPER: f64 = F_MAIN * DDMTD_COUNTER_M as f64 / (DDMTD_COUNTER_M + 1) as f64;
-const F_BEAT: f64 = F_MAIN - F_HELPER;
-const TIME_STEP: f32 = 1./F_BEAT as f32;
-
-fn ddmtd_tag_to_s(mu: f32) -> f32 {
-    return (mu as f32)*TIME_STEP;
-}
-
-fn get_frequencies() -> (u32, u32, u32) {
-    unsafe {
-        csr::wrpll::frequency_counter_update_en_write(1);
-        // wait for at least one full update cycle (> 2 timer periods)
-        clock::spin_us(200_000);
-        csr::wrpll::frequency_counter_update_en_write(0);
-        let helper = csr::wrpll::frequency_counter_counter_helper_read();
-        let main = csr::wrpll::frequency_counter_counter_rtio_read();
-        let cdr = csr::wrpll::frequency_counter_counter_rtio_rx0_read();
-        (helper, main, cdr)
-    }
-}
-
-fn log_frequencies() -> (u32, u32, u32) {
-    let (f_helper, f_main, f_cdr) = get_frequencies();
-    let conv_khz = |f| 4*(f as u64)*(csr::CONFIG_CLOCK_FREQUENCY as u64)/(1000*(1 << 23));
-    info!("helper clock frequency: {}kHz ({})", conv_khz(f_helper), f_helper);
-    info!("main clock frequency: {}kHz ({})", conv_khz(f_main), f_main);
-    info!("CDR clock frequency: {}kHz ({})", conv_khz(f_cdr), f_cdr);
-    (f_helper, f_main, f_cdr)
-}
-
-fn get_tags() -> (i32, i32, u16, u16) {
-    unsafe {
-        csr::wrpll::tag_arm_write(1);
-        while csr::wrpll::tag_arm_read() != 0 {}
-
-        let main_diff = csr::wrpll::main_diff_tag_read() as i32;
-        let helper_diff = csr::wrpll::helper_diff_tag_read() as i32;
-        let ref_tag = csr::wrpll::ref_tag_read();
-        let main_tag = csr::wrpll::main_tag_read();
-        (main_diff, helper_diff, ref_tag, main_tag)
-    }
-}
-
-fn print_tags() {
-    const NUM_TAGS: usize = 30;
-    let mut main_diffs = [0; NUM_TAGS];  // input to main loop filter
-    let mut helper_diffs = [0; NUM_TAGS];  // input to helper loop filter
-    let mut ref_tags = [0; NUM_TAGS];
-    let mut main_tags = [0; NUM_TAGS];
-    let mut jitter = [0 as f32; NUM_TAGS];
-
-    for i in 0..NUM_TAGS {
-        let (main_diff, helper_diff, ref_tag, main_tag) = get_tags();
-        main_diffs[i] =  main_diff;
-        helper_diffs[i] = helper_diff;
-        ref_tags[i] = ref_tag;
-        main_tags[i] = main_tag;
-    }
-    info!("DDMTD ref tags: {:?}", ref_tags);
-    info!("DDMTD main tags: {:?}", main_tags);
-    info!("DDMTD main diffs: {:?}", main_diffs);
-    info!("DDMTD helper diffs: {:?}", helper_diffs);
-
-    // look at the difference between the main DCXO and reference...
-    let t0 = main_diffs[0];
-    main_diffs.iter_mut().for_each(|x| *x -= t0);
-
-    // crude estimate of the max difference across our sample set (assumes no unwrapping issues...)
-    let delta = main_diffs[main_diffs.len()-1] as f32 / (main_diffs.len()-1) as f32;
-    info!("detla: {:?} tags", delta);
-    let delta_f: f32 = delta/DDMTD_COUNTER_M as f32 * F_BEAT as f32;
-    info!("MAIN <-> ref frequency difference: {:?} Hz ({:?} ppm)", delta_f, delta_f/F_HELPER as f32 * 1e6);
-
-    jitter.iter_mut().enumerate().for_each(|(i, x)| *x = main_diffs[i] as f32 - delta*(i as f32));
-    info!("jitter: {:?} tags", jitter);
-
-    let var = jitter.iter().map(|x| x*x).fold(0 as f32, |acc, x| acc + x as f32) / NUM_TAGS as f32;
-    info!("variance: {:?} tags^2", var);
-}
-
-pub fn init() {
-    info!("initializing WR PLL...");
-
-    unsafe { csr::wrpll::helper_reset_write(1); }
-
-    unsafe {
-        csr::wrpll::helper_dcxo_i2c_address_write(si549::ADDRESS);
-        csr::wrpll::main_dcxo_i2c_address_write(si549::ADDRESS);
-    }
-
-    #[cfg(rtio_frequency = "125.0")]
-    let (h_hsdiv, h_lsdiv, h_fbdiv) = (0x05c, 0, 0x04b5badb98a);
-    #[cfg(rtio_frequency = "125.0")]
-    let (m_hsdiv, m_lsdiv, m_fbdiv) = (0x05c, 0, 0x04b5c447213);
-
-    si549::program(i2c::Dcxo::Main, m_hsdiv, m_lsdiv, m_fbdiv)
-        .expect("cannot initialize main Si549");
-    si549::program(i2c::Dcxo::Helper, h_hsdiv, h_lsdiv, h_fbdiv)
-        .expect("cannot initialize helper Si549");
-    // Si549 Settling Time for Large Frequency Change.
-    // Datasheet said 10ms but it lied.
-    clock::spin_us(50_000);
-
-    unsafe { csr::wrpll::helper_reset_write(0); }
-    clock::spin_us(1);
-}
-
-pub fn diagnostics() {
-    info!("WRPLL diagnostics...");
-    info!("Untrimmed oscillator frequencies:");
-    log_frequencies();
-
-    info!("Increase helper DCXO frequency by +10ppm (1.25kHz):");
-    si549::set_adpll(i2c::Dcxo::Helper, 85911).expect("ADPLL write failed");
-    // to do: add check on frequency?
-    log_frequencies();
-}
-
-fn trim_dcxos(f_helper: u32, f_main: u32, f_cdr: u32) -> Result<(i32, i32), &'static str> {
-    info!("Trimming oscillator frequencies...");
-    const DCXO_STEP: i64 = (1.0e6/0.0001164) as i64;
-    const ADPLL_MAX: i64 = (950.0/0.0001164) as i64;
-
-    const TIMER_WIDTH: u32 = 23;
-    const COUNTER_DIV: u32 = 2;
-
-    // how many counts we expect to measure
-    const SYS_COUNTS: i64 = (1 << (TIMER_WIDTH - COUNTER_DIV)) as i64;
-    const EXP_MAIN_COUNTS: i64 = ((SYS_COUNTS as f64) * (F_MAIN/F_SYS)) as i64;
-    const EXP_HELPER_COUNTS: i64 = ((SYS_COUNTS as f64) * (F_HELPER/F_SYS)) as i64;
-
-    // calibrate the SYS clock to the CDR clock and correct the measured counts
-    // assume frequency errors are small so we can make an additive correction
-    // positive error means sys clock is too fast
-    let sys_err: i64 = EXP_MAIN_COUNTS - (f_cdr as i64);
-    let main_err: i64 = EXP_MAIN_COUNTS - (f_main as i64) - sys_err;
-    let helper_err: i64 = EXP_HELPER_COUNTS - (f_helper as i64) - sys_err;
-
-    info!("sys count err {}", sys_err);
-    info!("main counts err {}", main_err);
-    info!("helper counts err {}", helper_err);
-
-    // calculate required adjustment to the ADPLL register see
-    // https://www.silabs.com/documents/public/data-sheets/si549-datasheet.pdf
-    // section 5.6
-    let helper_adpll: i64 = helper_err*DCXO_STEP/EXP_HELPER_COUNTS;
-    let main_adpll: i64 = main_err*DCXO_STEP/EXP_MAIN_COUNTS;
-    if helper_adpll.abs() > ADPLL_MAX {
-        return Err("helper DCXO offset too large");
-    }
-    if main_adpll.abs() > ADPLL_MAX {
-        return Err("main DCXO offset too large");
-    }
-
-    info!("ADPLL offsets: helper={} main={}", helper_adpll, main_adpll);
-    Ok((helper_adpll as i32, main_adpll as i32))
-}
-
-fn statistics(data: &[u16]) -> (f32, f32) {
-    let sum = data.iter().fold(0 as u32, |acc, x| acc + *x as u32);
-    let mean = sum as f32 / data.len() as f32;
-
-    let squared_sum = data.iter().fold(0 as u32, |acc, x| acc + (*x as u32).pow(2));
-    let variance = (squared_sum as f32 / data.len() as f32) - mean;
-    return (mean, variance)
-}
-
-fn select_recovered_clock_int(rc: bool) -> Result<(), &'static str> {
-    info!("Untrimmed oscillator frequencies:");
-    let (f_helper, f_main, f_cdr) = log_frequencies();
-    if rc {
-        let (helper_adpll, main_adpll) = trim_dcxos(f_helper, f_main, f_cdr)?;
-        // to do: add assertion on max frequency shift here?
-        si549::set_adpll(i2c::Dcxo::Helper, helper_adpll).expect("ADPLL write failed");
-        si549::set_adpll(i2c::Dcxo::Main, main_adpll).expect("ADPLL write failed");
-
-        log_frequencies();
-        clock::spin_us(100_000);  // TO DO: remove/reduce!
-        print_tags();
-
-        info!("increasing main DCXO by 1ppm (125Hz):");
-        si549::set_adpll(i2c::Dcxo::Main, main_adpll + 8591).expect("ADPLL write failed");
-        clock::spin_us(100_000);
-        print_tags();
-
-        si549::set_adpll(i2c::Dcxo::Main, main_adpll).expect("ADPLL write failed");
-
-        unsafe {
-            csr::wrpll::adpll_offset_helper_write(helper_adpll as u32);
-            csr::wrpll::adpll_offset_main_write(main_adpll as u32);
-            csr::wrpll::helper_dcxo_gpio_enable_write(0);
-            csr::wrpll::main_dcxo_gpio_enable_write(0);
-            csr::wrpll::helper_dcxo_errors_write(0xff);
-            csr::wrpll::main_dcxo_errors_write(0xff);
-            csr::wrpll::collector_reset_write(0);
-        }
-        clock::spin_us(1_000); // wait for the collector to produce meaningful output
-        unsafe {
-            csr::wrpll::filter_reset_write(0);
-        }
-
-        clock::spin_us(100_000);
-
-        print_tags();
-//        let mut tags = [0; 10];
-//        for i in 0..tags.len() {
-//            tags[i] = get_ddmtd_helper_tag();
-//        }
-//        info!("DDMTD helper tags: {:?}", tags);
-
-        unsafe {
-            csr::wrpll::filter_reset_write(1);
-            csr::wrpll::collector_reset_write(1);
-        }
-        clock::spin_us(50_000);
-        unsafe {
-            csr::wrpll::helper_dcxo_gpio_enable_write(1);
-            csr::wrpll::main_dcxo_gpio_enable_write(1);
-        }
-        unsafe {
-            info!("error {} {}",
-                csr::wrpll::helper_dcxo_errors_read(),
-                csr::wrpll::main_dcxo_errors_read());
-        }
-        info!("new ADPLL: {} {}",
-            si549::get_adpll(i2c::Dcxo::Helper)?,
-            si549::get_adpll(i2c::Dcxo::Main)?);
-    } else {
-        si549::set_adpll(i2c::Dcxo::Helper, 0).expect("ADPLL write failed");
-        si549::set_adpll(i2c::Dcxo::Main, 0).expect("ADPLL write failed");
-    }
-    Ok(())
-}
-
-pub fn select_recovered_clock(rc: bool) {
-    if rc {
-        info!("switching to recovered clock");
-    } else {
-        info!("switching to local XO clock");
-    }
-    match select_recovered_clock_int(rc) {
-        Ok(()) => info!("clock transition completed"),
-        Err(e) => error!("clock transition failed: {}", e)
-    }
-}

artiq/firmware/libboard_misoc/Cargo.toml

@@ -15,7 +15,7 @@ build_misoc = { path = "../libbuild_misoc" }
 [dependencies]
 byteorder = { version = "1.0", default-features = false }
 log = { version = "0.4", default-features = false, optional = true }
-smoltcp = { version = "0.8.0", default-features = false, optional = true }
+smoltcp = { version = "0.6.0", default-features = false, optional = true }
 riscv = { version = "0.6.0", features = ["inline-asm"] }
 
 [features]

artiq/firmware/libboard_misoc/config.rs

@@ -163,7 +163,7 @@ mod imp {
             while let Some(result) = iter.next() {
                 let (record_key, record_value) = result?;
                 if key.as_bytes() == record_key {
-                    found = true;
+                    found = !record_value.is_empty();
                     // last write wins
                     value = record_value
                 }

artiq/firmware/libboard_misoc/io_expander.rs

@@ -1,5 +1,14 @@
-use i2c;
 use csr;
+use i2c;
+
+// Only the bare minimum registers. Bits/IO connections equivalent between IC types.
+struct Registers {
+    // PCA9539 equivalent register names in comments
+    iodira: u8, // Configuration Port 0
+    iodirb: u8, // Configuration Port 1
+    gpioa: u8,  // Output Port 0
+    gpiob: u8,  // Output Port 1
+}
 
 pub struct IoExpander {
     busno: u8,
@@ -9,15 +18,17 @@ pub struct IoExpander {
     iodir: [u8; 2],
     out_current: [u8; 2],
     out_target: [u8; 2],
+    registers: Registers,
 }
 
 impl IoExpander {
     #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
-    pub fn new(index: u8) -> Self {
+    pub fn new(index: u8) -> Result<Self, &'static str> {
         const VIRTUAL_LED_MAPPING0: [(u8, u8, u8); 2] = [(0, 0, 6), (1, 1, 6)];
         const VIRTUAL_LED_MAPPING1: [(u8, u8, u8); 2] = [(2, 0, 6), (3, 1, 6)];
+
         // Both expanders on SHARED I2C bus
-        match index {
+        let mut io_expander = match index {
             0 => IoExpander {
                 busno: 0,
                 port: 11,
@@ -26,6 +37,12 @@ impl IoExpander {
                 iodir: [0xff; 2],
                 out_current: [0; 2],
                 out_target: [0; 2],
+                registers: Registers {
+                    iodira: 0x00,
+                    iodirb: 0x01,
+                    gpioa: 0x12,
+                    gpiob: 0x13,
+                },
             },
             1 => IoExpander {
                 busno: 0,
@@ -35,9 +52,33 @@ impl IoExpander {
                 iodir: [0xff; 2],
                 out_current: [0; 2],
                 out_target: [0; 2],
+                registers: Registers {
+                    iodira: 0x00,
+                    iodirb: 0x01,
+                    gpioa: 0x12,
+                    gpiob: 0x13,
+                },
             },
-            _ => panic!("incorrect I/O expander index"),
+            _ => return Err("incorrect I/O expander index"),
+        };
+        if !io_expander.check_ack()? {
+            #[cfg(feature = "log")]
+            log::info!(
+                "MCP23017 io expander {} not found. Checking for PCA9539.",
+                index
+            );
+            io_expander.address += 0xa8; // translate to PCA9539 addresses (see schematic)
+            io_expander.registers = Registers {
+                iodira: 0x06,
+                iodirb: 0x07,
+                gpioa: 0x02,
+                gpiob: 0x03,
+            };
+            if !io_expander.check_ack()? {
+                return Err("Neither MCP23017 nor PCA9539 io expander found.");
+            };
         }
+        Ok(io_expander)
     }
 
     #[cfg(soc_platform = "kasli")]
@@ -57,9 +98,18 @@ impl IoExpander {
         Ok(())
     }
 
+    fn check_ack(&self) -> Result<bool, &'static str> {
+        // Check for ack from io expander
+        self.select()?;
+        i2c::start(self.busno)?;
+        let ack = i2c::write(self.busno, self.address)?;
+        i2c::stop(self.busno)?;
+        Ok(ack)
+    }
+
     fn update_iodir(&self) -> Result<(), &'static str> {
-        self.write(0x00, self.iodir[0])?;
+        self.write(self.registers.iodira, self.iodir[0])?;
-        self.write(0x01, self.iodir[1])?;
+        self.write(self.registers.iodirb, self.iodir[1])?;
         Ok(())
     }
 
@@ -72,9 +122,9 @@ impl IoExpander {
         self.update_iodir()?;
 
         self.out_current[0] = 0x00;
-        self.write(0x12, 0x00)?;
+        self.write(self.registers.gpioa, 0x00)?;
         self.out_current[1] = 0x00;
-        self.write(0x13, 0x00)?;
+        self.write(self.registers.gpiob, 0x00)?;
         Ok(())
     }
 
@@ -94,20 +144,18 @@ impl IoExpander {
 
     pub fn service(&mut self) -> Result<(), &'static str> {
         for (led, port, bit) in self.virtual_led_mapping.iter() {
-            let level = unsafe {
+            let level = unsafe { (csr::virtual_leds::status_read() >> led) & 1 };
-                (csr::virtual_leds::status_read() >> led) & 1
-            };
             self.set(*port, *bit, level != 0);
         }
 
         if self.out_target != self.out_current {
             self.select()?;
             if self.out_target[0] != self.out_current[0] {
-                self.write(0x12, self.out_target[0])?;
+                self.write(self.registers.gpioa, self.out_target[0])?;
                 self.out_current[0] = self.out_target[0];
             }
             if self.out_target[1] != self.out_current[1] {
-                self.write(0x13, self.out_target[1])?;
+                self.write(self.registers.gpiob, self.out_target[1])?;
                 self.out_current[1] = self.out_target[1];
             }
         }

artiq/firmware/libboard_misoc/lib.rs

@@ -1,5 +1,6 @@
 #![no_std]
 #![feature(llvm_asm)]
+#![feature(asm)]
 
 extern crate byteorder;
 #[cfg(feature = "log")]

artiq/firmware/libboard_misoc/net_settings.rs

@@ -1,43 +1,15 @@
 use core::fmt;
-use core::fmt::{Display, Formatter};
-use core::str::FromStr;
 
-use smoltcp::wire::{EthernetAddress, IpAddress, Ipv4Address};
+use smoltcp::wire::{EthernetAddress, IpAddress};
 
 use config;
 #[cfg(soc_platform = "kasli")]
 use i2c_eeprom;
 
-pub enum Ipv4AddrConfig {
-    UseDhcp,
-    Static(Ipv4Address),
-}
-
-impl FromStr for Ipv4AddrConfig {
-    type Err = ();
-
-    fn from_str(s: &str) -> Result<Self, Self::Err> {
-        Ok(if s == "use_dhcp" {
-            Ipv4AddrConfig::UseDhcp
-        } else {
-            Ipv4AddrConfig::Static(Ipv4Address::from_str(s)?)
-        })
-    }
-}
-
-impl Display for Ipv4AddrConfig {
-    fn fmt(&self, f: &mut Formatter<'_>) -> fmt::Result {
-        match self {
-            Ipv4AddrConfig::UseDhcp => write!(f, "use_dhcp"),
-            Ipv4AddrConfig::Static(ipv4) => write!(f, "{}", ipv4)
-        }
-    }
-}
-
 
 pub struct NetAddresses {
     pub hardware_addr: EthernetAddress,
-    pub ipv4_addr: Ipv4AddrConfig,
+    pub ipv4_addr: IpAddress,
     pub ipv6_ll_addr: IpAddress,
     pub ipv6_addr: Option<IpAddress>
 }
@@ -79,7 +51,16 @@ pub fn get_adresses() -> NetAddresses {
     let ipv4_addr;
     match config::read_str("ip", |r| r.map(|s| s.parse())) {
         Ok(Ok(addr)) => ipv4_addr = addr,
-        _ => ipv4_addr = Ipv4AddrConfig::UseDhcp,
+        _ => {
+            #[cfg(soc_platform = "kasli")]
+            { ipv4_addr = IpAddress::v4(192, 168, 1, 70); }
+            #[cfg(soc_platform = "sayma_amc")]
+            { ipv4_addr = IpAddress::v4(192, 168, 1, 60); }
+            #[cfg(soc_platform = "metlino")]
+            { ipv4_addr = IpAddress::v4(192, 168, 1, 65); }
+            #[cfg(soc_platform = "kc705")]
+            { ipv4_addr = IpAddress::v4(192, 168, 1, 50); }
+        }
     }
 
     let ipv6_ll_addr = IpAddress::v6(

artiq/firmware/libeh/Cargo.toml

@@ -11,4 +11,3 @@ path = "lib.rs"
 cslice = { version = "0.3" }
 libc = { path = "../libc" }
 unwind = { path = "../libunwind" }
-compiler_builtins = "=0.1.39"    # A dependency of alloc, libeh doesn't need it

artiq/firmware/libproto_artiq/rpc_proto.rs

@@ -6,22 +6,81 @@ use io::{ProtoRead, Read, Write, ProtoWrite, Error};
 use self::tag::{Tag, TagIterator, split_tag};
 
 #[inline]
-fn alignment_offset(alignment: isize, ptr: isize) -> isize {
+fn round_up(val: usize, power_of_two: usize) -> usize {
-    (-ptr).rem_euclid(alignment)
+    assert!(power_of_two.is_power_of_two());
+    let max_rem = power_of_two - 1;
+    (val + max_rem) & (!max_rem)
 }
 
+#[inline]
+unsafe fn round_up_mut<T>(ptr: *mut T, power_of_two: usize) -> *mut T {
+    round_up(ptr as usize, power_of_two) as *mut T
+}
+
+#[inline]
+unsafe fn round_up_const<T>(ptr: *const T, power_of_two: usize) -> *const T {
+    round_up(ptr as usize, power_of_two) as *const T
+}
+
+#[inline]
 unsafe fn align_ptr<T>(ptr: *const ()) -> *const T {
-    let alignment = core::mem::align_of::<T>() as isize;
+    round_up_const(ptr, core::mem::align_of::<T>()) as *const T
-    let fix = alignment_offset(alignment as isize, ptr as isize);
-    ((ptr as isize) + fix) as *const T
 }
 
+#[inline]
 unsafe fn align_ptr_mut<T>(ptr: *mut ()) -> *mut T {
-    let alignment = core::mem::align_of::<T>() as isize;
+    round_up_mut(ptr, core::mem::align_of::<T>()) as *mut T
-    let fix =  alignment_offset(alignment as isize, ptr as isize);
-    ((ptr as isize) + fix) as *mut T
 }
 
+/// Reads (deserializes) `length` array or list elements of type `tag` from `reader`,
+/// writing them into the buffer given by `storage`.
+///
+/// `alloc` is used for nested allocations (if elements themselves contain
+/// lists/arrays), see [recv_value].
+unsafe fn recv_elements<R, E>(
+    reader: &mut R,
+    tag: Tag,
+    length: usize,
+    storage: *mut (),
+    alloc: &dyn Fn(usize) -> Result<*mut (), E>,
+) -> Result<(), E>
+where
+    R: Read + ?Sized,
+    E: From<Error<R::ReadError>>,
+{
+    // List of simple types are special-cased in the protocol for performance.
+    match tag {
+        Tag::Bool => {
+            let dest = slice::from_raw_parts_mut(storage as *mut u8, length);
+            reader.read_exact(dest)?;
+        },
+        Tag::Int32 => {
+            let dest = slice::from_raw_parts_mut(storage as *mut u8, length * 4);
+            reader.read_exact(dest)?;
+            let dest = slice::from_raw_parts_mut(storage as *mut i32, length);
+            NativeEndian::from_slice_i32(dest);
+        },
+        Tag::Int64 | Tag::Float64 => {
+            let dest = slice::from_raw_parts_mut(storage as *mut u8, length * 8);
+            reader.read_exact(dest)?;
+            let dest = slice::from_raw_parts_mut(storage as *mut i64, length);
+            NativeEndian::from_slice_i64(dest);
+        },
+        _ => {
+            let mut data = storage;
+            for _ in 0..length {
+                recv_value(reader, tag, &mut data, alloc)?
+            }
+        }
+    }
+    Ok(())
+}
+
+/// Reads (deserializes) a value of type `tag` from `reader`, writing the results to
+/// the kernel-side buffer `data` (the passed pointer to which is incremented to point
+/// past the just-received data). For nested allocations (lists/arrays), `alloc` is
+/// invoked any number of times with the size of the required allocation as a parameter
+/// (which is assumed to be correctly aligned for all payload types).
 unsafe fn recv_value<R, E>(reader: &mut R, tag: Tag, data: &mut *mut (),
                            alloc: &dyn Fn(usize) -> Result<*mut (), E>)
                           -> Result<(), E>
@@ -53,105 +112,73 @@ unsafe fn recv_value<R, E>(reader: &mut R, tag: Tag, data: &mut *mut (),
         Tag::String | Tag::Bytes | Tag::ByteArray => {
             consume_value!(CMutSlice<u8>, |ptr| {
                 let length = reader.read_u32()? as usize;
-                *ptr = CMutSlice::new(alloc(length)? as *mut u8, length);
+                if length > 0 {
-                reader.read_exact((*ptr).as_mut())?;
+                    *ptr = CMutSlice::new(alloc(length)? as *mut u8, length);
+                    reader.read_exact((*ptr).as_mut())?;
+                } else {
+                    *ptr = CMutSlice::new(core::ptr::NonNull::<u8>::dangling().as_ptr(), 0);
+                }
                 Ok(())
             })
         }
         Tag::Tuple(it, arity) => {
-            *data = data.offset(alignment_offset(tag.alignment() as isize, *data as isize));
+            let alignment = tag.alignment();
+            *data = round_up_mut(*data, alignment);
             let mut it = it.clone();
             for _ in 0..arity {
                 let tag = it.next().expect("truncated tag");
                 recv_value(reader, tag, data, alloc)?
             }
+            // Take into account any tail padding (if element(s) with largest alignment
+            // are not at the end).
+            *data = round_up_mut(*data, alignment);
             Ok(())
         }
         Tag::List(it) => {
             #[repr(C)]
-            struct List { elements: *mut (), length: u32 }
+            struct List { elements: *mut (), length: usize }
-            consume_value!(*mut List, |ptr| {
+            consume_value!(*mut List, |ptr_to_list| {
                 let tag = it.clone().next().expect("truncated tag");
-                let padding = if let Tag::Int64 | Tag::Float64 = tag { 4 } else { 0 };
-
                 let length = reader.read_u32()? as usize;
-                let data = alloc(tag.size() * length + padding + 8)? as *mut u8;
-                *ptr = data as *mut List;
-                let ptr = data as *mut List;
-                let mut data = data.offset(8 + alignment_offset(tag.alignment() as isize, data as isize)) as *mut ();
 
-                (*ptr).length = length as u32;
+                // To avoid multiple kernel CPU roundtrips, use a single allocation for
-                (*ptr).elements = data;
+                // both the pointer/length List (slice) and the backing storage for the
-                match tag {
+                // elements. We can assume that alloc() is aligned suitably, so just
-                    Tag::Bool => {
+                // need to take into account any extra padding required.
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length);
+                // (Note: On RISC-V, there will never actually be any types with
-                        reader.read_exact(dest)?;
+                // alignment larger than 8 bytes, so storage_offset == 0 always.)
-                    },
+                let list_size = 4 + 4;
-                    Tag::Int32 => {
+                let storage_offset = round_up(list_size, tag.alignment());
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length * 4);
+                let storage_size = tag.size() * length;
-                        reader.read_exact(dest)?;
+
-                        let dest = slice::from_raw_parts_mut(data as *mut i32, length);
+                let allocation = alloc(storage_offset + storage_size)? as *mut u8;
-                        NativeEndian::from_slice_i32(dest);
+                *ptr_to_list = allocation as *mut List;
-                    },
+                let storage = allocation.offset(storage_offset as isize) as *mut ();
-                    Tag::Int64 | Tag::Float64 => {
+
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length * 8);
+                (**ptr_to_list).length = length;
-                        reader.read_exact(dest)?;
+                (**ptr_to_list).elements = storage;
-                        let dest = slice::from_raw_parts_mut(data as *mut i64, length);
+                recv_elements(reader, tag, length, storage, alloc)
-                        NativeEndian::from_slice_i64(dest);
-                    },
-                    _ => {
-                        for _ in 0..length {
-                            recv_value(reader, tag, &mut data, alloc)?
-                        }
-                    }
-                }
-                Ok(())
             })
         }
         Tag::Array(it, num_dims) => {
             consume_value!(*mut (), |buffer| {
-                let mut total_len: u32 = 1;
+                // Deserialize length along each dimension and compute total number of
+                // elements.
+                let mut total_len: usize = 1;
                 for _ in 0..num_dims {
-                    let len = reader.read_u32()?;
+                    let len = reader.read_u32()? as usize;
                     total_len *= len;
-                    consume_value!(u32, |ptr| *ptr = len )
+                    consume_value!(usize, |ptr| *ptr = len )
                 }
-                let length = total_len as usize;
 
+                // Allocate backing storage for elements; deserialize them.
                 let elt_tag = it.clone().next().expect("truncated tag");
-                let padding = if let Tag::Int64 | Tag::Float64 = tag { 4 } else { 0 };
+                *buffer = alloc(elt_tag.size() * total_len)?;
-                let mut data = alloc(elt_tag.size() * length + padding)?;
+                recv_elements(reader, elt_tag, total_len, *buffer, alloc)
-                data = data.offset(alignment_offset(tag.alignment() as isize, data as isize));
-
-                *buffer = data;
-                match elt_tag {
-                    Tag::Bool => {
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length);
-                        reader.read_exact(dest)?;
-                    },
-                    Tag::Int32 => {
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length * 4);
-                        reader.read_exact(dest)?;
-                        let dest = slice::from_raw_parts_mut(data as *mut i32, length);
-                        NativeEndian::from_slice_i32(dest);
-                    },
-                    Tag::Int64 | Tag::Float64 => {
-                        let dest = slice::from_raw_parts_mut(data as *mut u8, length * 8);
-                        reader.read_exact(dest)?;
-                        let dest = slice::from_raw_parts_mut(data as *mut i64, length);
-                        NativeEndian::from_slice_i64(dest);
-                    },
-                    _ => {
-                        for _ in 0..length {
-                            recv_value(reader, elt_tag, &mut data, alloc)?
-                        }
-                    }
-                }
-                Ok(())
             })
         }
         Tag::Range(it) => {
-            *data = data.offset(alignment_offset(tag.alignment() as isize, *data as isize));
+            *data = round_up_mut(*data, tag.alignment());
             let tag = it.clone().next().expect("truncated tag");
             recv_value(reader, tag, data, alloc)?;
             recv_value(reader, tag, data, alloc)?;
@@ -180,6 +207,36 @@ pub fn recv_return<R, E>(reader: &mut R, tag_bytes: &[u8], data: *mut (),
     Ok(())
 }
 
+unsafe fn send_elements<W>(writer: &mut W, elt_tag: Tag, length: usize, data: *const ())
+                          -> Result<(), Error<W::WriteError>>
+    where W: Write + ?Sized
+{
+    writer.write_u8(elt_tag.as_u8())?;
+    match elt_tag {
+        // we cannot use NativeEndian::from_slice_i32 as the data is not mutable,
+        // and that is not needed as the data is already in native endian
+        Tag::Bool => {
+            let slice = slice::from_raw_parts(data as *const u8, length);
+            writer.write_all(slice)?;
+        },
+        Tag::Int32 => {
+            let slice = slice::from_raw_parts(data as *const u8, length * 4);
+            writer.write_all(slice)?;
+        },
+        Tag::Int64 | Tag::Float64 => {
+            let slice = slice::from_raw_parts(data as *const u8, length * 8);
+            writer.write_all(slice)?;
+        },
+        _ => {
+            let mut data = data;
+            for _ in 0..length {
+                send_value(writer, elt_tag, &mut data)?;
+            }
+        }
+    }
+    Ok(())
+}
+
 unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ())
                        -> Result<(), Error<W::WriteError>>
     where W: Write + ?Sized
@@ -213,10 +270,13 @@ unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ())
         Tag::Tuple(it, arity) => {
             let mut it = it.clone();
             writer.write_u8(arity)?;
+            let mut max_alignment = 0;
             for _ in 0..arity {
                 let tag = it.next().expect("truncated tag");
+                max_alignment = core::cmp::max(max_alignment, tag.alignment());
                 send_value(writer, tag, data)?
             }
+            *data = round_up_const(*data, max_alignment);
             Ok(())
         }
         Tag::List(it) => {
@@ -226,30 +286,7 @@ unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ())
                 let length = (**ptr).length as usize;
                 writer.write_u32((**ptr).length)?;
                 let tag = it.clone().next().expect("truncated tag");
-                let mut data = (**ptr).elements;
+                send_elements(writer, tag, length, (**ptr).elements)
-                writer.write_u8(tag.as_u8())?;
-                match tag {
-                    // we cannot use NativeEndian::from_slice_i32 as the data is not mutable,
-                    // and that is not needed as the data is already in native endian
-                    Tag::Bool => {
-                        let slice = slice::from_raw_parts(data as *const u8, length);
-                        writer.write_all(slice)?;
-                    },
-                    Tag::Int32 => {
-                        let slice = slice::from_raw_parts(data as *const u8, length * 4);
-                        writer.write_all(slice)?;
-                    },
-                    Tag::Int64 | Tag::Float64 => {
-                        let slice = slice::from_raw_parts(data as *const u8, length * 8);
-                        writer.write_all(slice)?;
-                    },
-                    _ => {
-                        for _ in 0..length {
-                            send_value(writer, tag, &mut data)?;
-                        }
-                    }
-                }
-                Ok(())
             })
         }
         Tag::Array(it, num_dims) => {
@@ -265,30 +302,7 @@ unsafe fn send_value<W>(writer: &mut W, tag: Tag, data: &mut *const ())
                     })
                 }
                 let length = total_len as usize;
-                let mut data = *buffer;
+                send_elements(writer, elt_tag, length, *buffer)
-                writer.write_u8(elt_tag.as_u8())?;
-                match elt_tag {
-                    // we cannot use NativeEndian::from_slice_i32 as the data is not mutable,
-                    // and that is not needed as the data is already in native endian
-                    Tag::Bool => {
-                        let slice = slice::from_raw_parts(data as *const u8, length);
-                        writer.write_all(slice)?;
-                    },
-                    Tag::Int32 => {
-                        let slice = slice::from_raw_parts(data as *const u8, length * 4);
-                        writer.write_all(slice)?;
-                    },
-                    Tag::Int64 | Tag::Float64 => {
-                        let slice = slice::from_raw_parts(data as *const u8, length * 8);
-                        writer.write_all(slice)?;
-                    },
-                    _ => {
-                        for _ in 0..length {
-                            send_value(writer, elt_tag, &mut data)?;
-                        }
-                    }
-                }
-                Ok(())
             })
         }
         Tag::Range(it) => {
@@ -349,7 +363,7 @@ pub fn send_args<W>(writer: &mut W, service: u32, tag_bytes: &[u8], data: *const
 
 mod tag {
     use core::fmt;
-    use super::alignment_offset;
+    use super::round_up;
 
     pub fn split_tag(tag_bytes: &[u8]) -> (&[u8], &[u8]) {
         let tag_separator =
@@ -416,16 +430,18 @@ mod tag {
                     let it = it.clone();
                     it.take(3).map(|t| t.alignment()).max().unwrap()
                 }
-                // CSlice basically
+                // the ptr/length(s) pair is basically CSlice
-                Tag::Bytes | Tag::String | Tag::ByteArray | Tag::List(_) =>
+                Tag::Bytes | Tag::String | Tag::ByteArray | Tag::List(_) | Tag::Array(_, _) =>
                     core::mem::align_of::<CSlice<()>>(),
-                // array buffer is allocated, so no need for alignment first
+                Tag::Keyword(_) => unreachable!("Tag::Keyword should not appear in composite types"),
-                Tag::Array(_, _) => 1,
+                Tag::Object => core::mem::align_of::<u32>(),
-                // will not be sent from the host
-                _ => unreachable!("unexpected tag from host")
             }
         }
 
+        /// Returns the "alignment size" of a value with the type described by the tag
+        /// (in bytes), i.e. the stride between successive elements in a list/array of
+        /// the given type, or the offset from a struct element of this type to the
+        /// next field.
         pub fn size(self) -> usize {
             match self {
                 Tag::None => 0,
@@ -438,12 +454,18 @@ mod tag {
                 Tag::ByteArray => 8,
                 Tag::Tuple(it, arity) => {
                     let mut size = 0;
+                    let mut max_alignment = 0;
                     let mut it = it.clone();
                     for _ in 0..arity {
                         let tag = it.next().expect("truncated tag");
+                        let alignment = tag.alignment();
+                        max_alignment = core::cmp::max(max_alignment, alignment);
+                        size = round_up(size, alignment);
                         size += tag.size();
-                        size += alignment_offset(tag.alignment() as isize, size as isize) as usize;
                     }
+                    // Take into account any tail padding (if element(s) with largest
+                    // alignment are not at the end).
+                    size = round_up(size, max_alignment);
                     size
                 }
                 Tag::List(_) => 8,

artiq/firmware/runtime/Cargo.toml

@@ -17,7 +17,7 @@ failure = { version = "0.1", default-features = false }
 failure_derive = { version = "0.1", default-features = false }
 byteorder = { version = "1.0", default-features = false }
 cslice = { version = "0.3" }
-log = { version = "0.4", default-features = false }
+log = { version = "=0.4.14", default-features = false }
 managed = { version = "^0.7.1", default-features = false, features = ["alloc", "map"] }
 eh = { path = "../libeh" }
 unwind_backtrace = { path = "../libunwind_backtrace" }
@@ -27,13 +27,9 @@ board_misoc = { path = "../libboard_misoc", features = ["uart_console", "smoltcp
 logger_artiq = { path = "../liblogger_artiq" }
 board_artiq = { path = "../libboard_artiq" }
 proto_artiq = { path = "../libproto_artiq", features = ["log", "alloc"] }
+smoltcp = { version = "0.6.0", default-features = false, features = ["alloc", "ethernet", "proto-ipv4", "proto-ipv6", "socket-tcp"] }
 riscv = { version = "0.6.0", features = ["inline-asm"] }
 
-[dependencies.smoltcp]
-version = "0.8.0"
-default-features = false
-features = ["alloc", "medium-ethernet", "proto-ipv4", "proto-ipv6", "socket-tcp", "socket-dhcpv4"]
-
 [dependencies.fringe]
 git = "https://git.m-labs.hk/M-Labs/libfringe.git"
 rev = "3ecbe5"

artiq/firmware/runtime/Makefile

@@ -10,8 +10,6 @@ LDFLAGS += \
 
 RUSTFLAGS += -Cpanic=unwind
 
-export XBUILD_SYSROOT_PATH=$(BUILDINC_DIRECTORY)/../sysroot
-
 all:: runtime.bin runtime.fbi
 
 .PHONY: $(RUSTOUT)/libruntime.a
@@ -22,7 +20,7 @@ $(RUSTOUT)/libruntime.a:
 
 runtime.elf: $(RUSTOUT)/libruntime.a ksupport_data.o
 	$(link) -T $(RUNTIME_DIRECTORY)/runtime.ld \
-		-lunwind-bare -m elf32lriscv
+		-lunwind-vexriscv-bare -m elf32lriscv
 
 ksupport_data.o: ../ksupport/ksupport.elf
 	$(LD) -r -m elf32lriscv -b binary -o $@ $<

artiq/firmware/runtime/analyzer.rs

@@ -79,7 +79,5 @@ pub fn thread(io: Io) {
             Ok(())   => (),
             Err(err) => error!("analyzer aborted: {}", err)
         }
-
-        stream.close().expect("analyzer: close socket")
     }
 }

artiq/firmware/runtime/dhcp.rs

@@ -1,59 +0,0 @@
-use board_misoc::clock;
-use sched;
-use sched::Dhcpv4Socket;
-use smoltcp::socket::Dhcpv4Event;
-use smoltcp::wire::{Ipv4Address, Ipv4Cidr};
-
-pub fn dhcp_thread(io: sched::Io) {
-    let mut socket = Dhcpv4Socket::new(&io);
-    let mut last_ip: Option<Ipv4Cidr> = None;
-    let mut done_reset = false;
-    let start_time = clock::get_ms();
-
-    loop {
-        // A significant amount of the time our first discover isn't received
-        // by the server. This is likely to be because the ethernet device isn't quite
-        // ready at the point that it is sent. The following makes recovery from
-        // that faster.
-        if !done_reset && last_ip.is_none() && start_time + 1000 < clock::get_ms() {
-            info!("Didn't get initial IP in first second. Assuming packet loss, trying a reset.");
-            socket.reset();
-            done_reset = true;
-        }
-        if let Some(event) = socket.poll() {
-            match event {
-                Dhcpv4Event::Configured(config) => {
-                    // Only compare the ip address in the config with previous config because we
-                    // ignore the rest of the config i.e. we don't do any DNS or require a default
-                    // gateway.
-                    let changed = if let Some(last_ip) = last_ip {
-                        if config.address != last_ip {
-                            info!("IP address changed {} -> {}", last_ip, config.address);
-                            true
-                        } else {
-                            false
-                        }
-                    } else {
-                        info!("Acquired IP address: None -> {}", config.address);
-                        true
-                    };
-                    if changed {
-                        last_ip = Some(config.address);
-                        io.set_ipv4_address(&config.address);
-                    }
-                }
-                Dhcpv4Event::Deconfigured => {
-                    if let Some(ip) = last_ip {
-                        info!("Lost IP address {} -> None", ip);
-                        io.set_ipv4_address(&Ipv4Cidr::new(Ipv4Address::UNSPECIFIED, 0));
-                        last_ip = None;
-                    }
-                    // We always get one of these events at the start, ignore that one
-                }
-            }
-        }
-        // We want to poll after every poll of the interface. So we need to
-        // do a minimal yield here.
-        io.relinquish().unwrap();
-    }
-}

artiq/firmware/runtime/ip_addr_storage.rs

@@ -1,40 +0,0 @@
-use smoltcp::iface::{Interface, InterfaceBuilder};
-use smoltcp::phy::Device;
-use smoltcp::wire::{IpAddress, IpCidr, Ipv4Address, Ipv4Cidr};
-use board_misoc::net_settings::{Ipv4AddrConfig, NetAddresses};
-
-
-const IPV4_INDEX: usize = 0;
-const IPV6_LL_INDEX: usize = 1;
-const IPV6_INDEX: usize = 2;
-const IP_ADDRESS_STORAGE_SIZE: usize = 3;
-
-pub trait InterfaceBuilderEx {
-    fn init_ip_addrs(self, net_addresses: &NetAddresses) -> Self;
-}
-
-impl<'a, DeviceT: for<'d> Device<'d>> InterfaceBuilderEx for InterfaceBuilder<'a, DeviceT> {
-    fn init_ip_addrs(self, net_addresses: &NetAddresses) -> Self {
-        let mut storage = [
-            IpCidr::new(IpAddress::Ipv4(Ipv4Address::UNSPECIFIED), 0);  IP_ADDRESS_STORAGE_SIZE
-        ];
-        if let Ipv4AddrConfig::Static(ipv4) = net_addresses.ipv4_addr {
-            storage[IPV4_INDEX] = IpCidr::new(IpAddress::Ipv4(ipv4), 0);
-        }
-        storage[IPV6_LL_INDEX] = IpCidr::new(net_addresses.ipv6_ll_addr, 0);
-        if let Some(ipv6) = net_addresses.ipv6_addr {
-            storage[IPV6_INDEX] = IpCidr::new(ipv6, 0);
-        }
-        self.ip_addrs(storage)
-    }
-}
-
-pub trait InterfaceEx {
-    fn update_ipv4_addr(&mut self, addr: &Ipv4Cidr);
-}
-
-impl<'a, DeviceT: for<'d> Device<'d>> InterfaceEx for Interface<'a, DeviceT> {
-    fn update_ipv4_addr(&mut self, addr: &Ipv4Cidr) {
-        self.update_ip_addrs(|storage| storage[IPV4_INDEX] = IpCidr::Ipv4(*addr))
-    }
-}

artiq/firmware/runtime/main.rs

@@ -27,12 +27,11 @@ extern crate riscv;
 
 use core::cell::RefCell;
 use core::convert::TryFrom;
-use smoltcp::wire::HardwareAddress;
+use smoltcp::wire::IpCidr;
 
 use board_misoc::{csr, ident, clock, spiflash, config, net_settings, pmp, boot};
 #[cfg(has_ethmac)]
 use board_misoc::ethmac;
-use board_misoc::net_settings::{Ipv4AddrConfig};
 #[cfg(has_drtio)]
 use board_artiq::drtioaux;
 use board_artiq::drtio_routing;
@@ -42,7 +41,6 @@ use proto_artiq::{mgmt_proto, moninj_proto, rpc_proto, session_proto, kernel_pro
 use proto_artiq::analyzer_proto;
 
 use riscv::register::{mcause, mepc, mtval};
-use ip_addr_storage::InterfaceBuilderEx;
 
 mod rtio_clocking;
 mod rtio_mgt;
@@ -60,8 +58,6 @@ mod session;
 mod moninj;
 #[cfg(has_rtio_analyzer)]
 mod analyzer;
-mod dhcp;
-mod ip_addr_storage;
 
 #[cfg(has_grabber)]
 fn grabber_thread(io: sched::Io) {
@@ -104,8 +100,8 @@ fn startup() {
     let (mut io_expander0, mut io_expander1);
     #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
     {
-        io_expander0 = board_misoc::io_expander::IoExpander::new(0);
+        io_expander0 = board_misoc::io_expander::IoExpander::new(0).unwrap();
-        io_expander1 = board_misoc::io_expander::IoExpander::new(1);
+        io_expander1 = board_misoc::io_expander::IoExpander::new(1).unwrap();
         io_expander0.init().expect("I2C I/O expander #0 initialization failed");
         io_expander1.init().expect("I2C I/O expander #1 initialization failed");
 
@@ -127,35 +123,54 @@ fn startup() {
     net_device.reset_phy_if_any();
 
     let net_device = {
-        use smoltcp::phy::Tracer;
+        use smoltcp::time::Instant;
+        use smoltcp::wire::PrettyPrinter;
+        use smoltcp::wire::EthernetFrame;
 
-        // We can't create the function pointer as a separate variable here because the type of
+        fn net_trace_writer(timestamp: Instant, printer: PrettyPrinter<EthernetFrame<&[u8]>>) {
-        // the packet argument Packet isn't accessible and rust's type inference isn't sufficient
+            print!("\x1b[37m[{:6}.{:03}s]\n{}\x1b[0m\n",
-        // to propagate in to a local var.
+                   timestamp.secs(), timestamp.millis(), printer)
-        match config::read_str("net_trace", |r| r.map(|s| s == "1")) {
-            Ok(true) => Tracer::new(net_device, |timestamp, packet| {
-                print!("\x1b[37m[{:6}.{:03}s]\n{}\x1b[0m\n",
-                       timestamp.secs(), timestamp.millis(), packet)
-            }),
-            _ => Tracer::new(net_device, |_, _| {}),
         }
+
+        fn net_trace_silent(_timestamp: Instant, _printer: PrettyPrinter<EthernetFrame<&[u8]>>) {}
+
+        let net_trace_fn: fn(Instant, PrettyPrinter<EthernetFrame<&[u8]>>);
+        match config::read_str("net_trace", |r| r.map(|s| s == "1")) {
+            Ok(true) => net_trace_fn = net_trace_writer,
+            _ => net_trace_fn = net_trace_silent
+        }
+        smoltcp::phy::EthernetTracer::new(net_device, net_trace_fn)
     };
 
     let neighbor_cache =
         smoltcp::iface::NeighborCache::new(alloc::collections::btree_map::BTreeMap::new());
     let net_addresses = net_settings::get_adresses();
     info!("network addresses: {}", net_addresses);
-    let use_dhcp = if matches!(net_addresses.ipv4_addr, Ipv4AddrConfig::UseDhcp) {
+    let mut interface = match net_addresses.ipv6_addr {
-        info!("Will try to acquire an IPv4 address with DHCP");
+        Some(addr) => {
-        true
+            let ip_addrs = [
-    } else {
+                IpCidr::new(net_addresses.ipv4_addr, 0),
-        false
+                IpCidr::new(net_addresses.ipv6_ll_addr, 0),
+                IpCidr::new(addr, 0)
+            ];
+            smoltcp::iface::EthernetInterfaceBuilder::new(net_device)
+                       .ethernet_addr(net_addresses.hardware_addr)
+                       .ip_addrs(ip_addrs)
+                       .neighbor_cache(neighbor_cache)
+                       .finalize()
+        }
+        None => {
+            let ip_addrs = [
+                IpCidr::new(net_addresses.ipv4_addr, 0),
+                IpCidr::new(net_addresses.ipv6_ll_addr, 0)
+            ];
+            smoltcp::iface::EthernetInterfaceBuilder::new(net_device)
+                       .ethernet_addr(net_addresses.hardware_addr)
+                       .ip_addrs(ip_addrs)
+                       .neighbor_cache(neighbor_cache)
+                       .finalize()
+        }
     };
-    let interface = smoltcp::iface::InterfaceBuilder::new(net_device, vec![])
-        .hardware_addr(HardwareAddress::Ethernet(net_addresses.hardware_addr))
-        .init_ip_addrs(&net_addresses)
-        .neighbor_cache(neighbor_cache)
-        .finalize();
 
     #[cfg(has_drtio)]
     let drtio_routing_table = urc::Urc::new(RefCell::new(
@@ -169,13 +184,9 @@ fn startup() {
     drtio_routing::interconnect_disable_all();
     let aux_mutex = sched::Mutex::new();
 
-    let mut scheduler = sched::Scheduler::new(interface);
+    let mut scheduler = sched::Scheduler::new();
     let io = scheduler.io();
 
-    if use_dhcp {
-        io.spawn(4096, dhcp::dhcp_thread);
-    }
-
     rtio_mgt::startup(&io, &aux_mutex, &drtio_routing_table, &up_destinations);
 
     io.spawn(4096, mgmt::thread);
@@ -200,7 +211,19 @@ fn startup() {
     let mut net_stats = ethmac::EthernetStatistics::new();
     loop {
         scheduler.run();
-        scheduler.run_network();
+
+        {
+            let sockets = &mut *scheduler.sockets().borrow_mut();
+            loop {
+                let timestamp = smoltcp::time::Instant::from_millis(clock::get_ms() as i64);
+                match interface.poll(sockets, timestamp) {
+                    Ok(true) => (),
+                    Ok(false) => break,
+                    Err(smoltcp::Error::Unrecognized) => (),
+                    Err(err) => debug!("network error: {}", err)
+                }
+            }
+        }
 
         if let Some(_net_stats_diff) = net_stats.update() {
             debug!("ethernet mac:{}", ethmac::EthernetStatistics::new());

artiq/firmware/runtime/mgmt.rs

@@ -131,7 +131,6 @@ pub fn thread(io: Io) {
                 Err(Error::Io(IoError::UnexpectedEnd)) => (),
                 Err(err) => error!("aborted: {}", err)
             }
-            stream.close().expect("mgmt: close socket");
         });
     }
 }

artiq/firmware/runtime/moninj.rs

@@ -214,7 +214,6 @@ pub fn thread(io: Io, aux_mutex: &Mutex, routing_table: &Urc<RefCell<drtio_routi
                 Ok(()) => {},
                 Err(err) => error!("moninj aborted: {}", err)
             }
-            stream.close().expect("moninj: close socket");
         });
     }
 }

artiq/firmware/runtime/rtio_clocking.rs

@@ -103,7 +103,6 @@ pub mod crg {
 
     #[cfg(not(has_rtio_clock_switch))]
     pub fn init() -> bool {
-        info!("Using internal RTIO clock");
         unsafe {
             csr::rtio_crg::pll_reset_write(0);
         }
@@ -117,111 +116,133 @@ pub mod crg {
     pub fn check() -> bool { true }
 }
 
+// Si5324 input to select for locking to an external clock (as opposed to
+// a recovered link clock in DRTIO satellites, which is handled elsewhere).
+#[cfg(all(si5324_as_synthesizer, soc_platform = "kasli", hw_rev = "v2.0"))]
+const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin1;
+#[cfg(all(si5324_as_synthesizer, soc_platform = "kasli", not(hw_rev = "v2.0")))]
+const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin2;
+#[cfg(all(si5324_as_synthesizer, soc_platform = "metlino"))]
+const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin2;
+#[cfg(all(si5324_as_synthesizer, soc_platform = "kc705"))]
+const SI5324_EXT_INPUT: si5324::Input = si5324::Input::Ckin2;
+
 #[cfg(si5324_as_synthesizer)]
 fn setup_si5324_as_synthesizer(cfg: RtioClock) {
-    let si5324_settings = match cfg {
+    let (si5324_settings, si5324_ref_input) = match cfg {
         RtioClock::Ext0_Synth0_10to125 => { // 125 MHz output from 10 MHz CLKINx reference, 504 Hz BW
             info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 10,
+                si5324::FrequencySettings {
-                nc1_ls : 4,
+                    n1_hs  : 10,
-                n2_hs  : 10,
+                    nc1_ls : 4,
-                n2_ls  : 300,
+                    n2_hs  : 10,
-                n31    : 6,
+                    n2_ls  : 300,
-                n32    : 6,
+                    n31    : 6,
-                bwsel  : 4,
+                    n32    : 6,
-                crystal_ref: false
+                    bwsel  : 4,
-            }
+                    crystal_as_ckin2: false
+                },
+                SI5324_EXT_INPUT
+            )
         },
         RtioClock::Ext0_Synth0_100to125 => { // 125MHz output, from 100MHz CLKINx reference, 586 Hz loop bandwidth
-            info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
+            info!("using 100MHz reference to make 125MHz RTIO clock with PLL");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 10,
+                si5324::FrequencySettings {
-                nc1_ls : 4,
+                    n1_hs  : 10,
-                n2_hs  : 10,
+                    nc1_ls : 4,
-                n2_ls  : 260,
+                    n2_hs  : 10,
-                n31    : 52,
+                    n2_ls  : 260,
-                n32    : 52,
+                    n31    : 52,
-                bwsel  : 4,
+                    n32    : 52,
-                crystal_ref: false
+                    bwsel  : 4,
-            }
+                    crystal_as_ckin2: false
+                },
+                SI5324_EXT_INPUT
+            )
         },
         RtioClock::Ext0_Synth0_125to125 => { // 125MHz output, from 125MHz CLKINx reference, 606 Hz loop bandwidth
-            info!("using 10MHz reference to make 125MHz RTIO clock with PLL");
+            info!("using 125MHz reference to make 125MHz RTIO clock with PLL");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 5,
+                si5324::FrequencySettings {
-                nc1_ls : 8,
+                    n1_hs  : 5,
-                n2_hs  : 7,
+                    nc1_ls : 8,
-                n2_ls  : 360,
+                    n2_hs  : 7,
-                n31    : 63,
+                    n2_ls  : 360,
-                n32    : 63,
+                    n31    : 63,
-                bwsel  : 4,
+                    n32    : 63,
-                crystal_ref: false
+                    bwsel  : 4,
-            }
+                    crystal_as_ckin2: false
+                },
+                SI5324_EXT_INPUT
+            )
         },
         RtioClock::Int_150 => { // 150MHz output, from crystal
             info!("using internal 150MHz RTIO clock");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 9,
+                si5324::FrequencySettings {
-                nc1_ls : 4,
+                    n1_hs  : 9,
-                n2_hs  : 10,
+                    nc1_ls : 4,
-                n2_ls  : 33732,
+                    n2_hs  : 10,
-                n31    : 7139,
+                    n2_ls  : 33732,
-                n32    : 7139,
+                    n31    : 7139,
-                bwsel  : 3,
+                    n32    : 7139,
-                crystal_ref: true
+                    bwsel  : 3,
-            }
+                    crystal_as_ckin2: true
+                },
+                si5324::Input::Ckin2
+            )
         },
-        RtioClock::Int_100 => { // 100MHz output, from crystal. Also used as reference for Sayma HMC830.
+        RtioClock::Int_100 => { // 100MHz output, from crystal
             info!("using internal 100MHz RTIO clock");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 9,
+                si5324::FrequencySettings {
-                nc1_ls : 6,
+                    n1_hs  : 9,
-                n2_hs  : 10,
+                    nc1_ls : 6,
-                n2_ls  : 33732,
+                    n2_hs  : 10,
-                n31    : 7139,
+                    n2_ls  : 33732,
-                n32    : 7139,
+                    n31    : 7139,
-                bwsel  : 3,
+                    n32    : 7139,
-                crystal_ref: true
+                    bwsel  : 3,
-            }
+                    crystal_as_ckin2: true
+                },
+                si5324::Input::Ckin2
+            )
         },
         RtioClock::Int_125 => { // 125MHz output, from crystal, 7 Hz
             info!("using internal 125MHz RTIO clock");
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 10,
+                si5324::FrequencySettings {
-                nc1_ls : 4,
+                    n1_hs  : 10,
-                n2_hs  : 10,
+                    nc1_ls : 4,
-                n2_ls  : 19972,
+                    n2_hs  : 10,
-                n31    : 4565,
+                    n2_ls  : 19972,
-                n32    : 4565,
+                    n31    : 4565,
-                bwsel  : 4,
+                    n32    : 4565,
-                crystal_ref: true
+                    bwsel  : 4,
-            }
+                    crystal_as_ckin2: true
-        }
+                },
+                si5324::Input::Ckin2
+            )
+        },
         _ => { // 125MHz output like above, default (if chosen option is not supported)
             warn!("rtio_clock setting '{:?}' is not supported. Falling back to default internal 125MHz RTIO clock.", cfg);
-            si5324::FrequencySettings {
+            (
-                n1_hs  : 10,
+                si5324::FrequencySettings {
-                nc1_ls : 4,
+                    n1_hs  : 10,
-                n2_hs  : 10,
+                    nc1_ls : 4,
-                n2_ls  : 19972,
+                    n2_hs  : 10,
-                n31    : 4565,
+                    n2_ls  : 19972,
-                n32    : 4565,
+                    n31    : 4565,
-                bwsel  : 4,
+                    n32    : 4565,
-                crystal_ref: true
+                    bwsel  : 4,
-            }
+                    crystal_as_ckin2: true
+                },
+                si5324::Input::Ckin2
+            )
         }
     };
-    #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0", not(si5324_ext_ref)))]
-    let si5324_ref_input = si5324::Input::Ckin2;
-    #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0", si5324_ext_ref))]
-    let si5324_ref_input = si5324::Input::Ckin1;
-    #[cfg(all(soc_platform = "kasli", not(hw_rev = "v2.0")))]
-    let si5324_ref_input = si5324::Input::Ckin2;
-    #[cfg(soc_platform = "metlino")]
-    let si5324_ref_input = si5324::Input::Ckin2;
-    #[cfg(soc_platform = "kc705")]
-    let si5324_ref_input = si5324::Input::Ckin2;
     si5324::setup(&si5324_settings, si5324_ref_input).expect("cannot initialize Si5324");
 }
 
@@ -229,18 +250,10 @@ pub fn init() {
     let clock_cfg = get_rtio_clock_cfg();
     #[cfg(si5324_as_synthesizer)]
     {
-        #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
-        let si5324_ext_input = si5324::Input::Ckin1;
-        #[cfg(all(soc_platform = "kasli", not(hw_rev = "v2.0")))]
-        let si5324_ext_input = si5324::Input::Ckin2;
-        #[cfg(soc_platform = "metlino")]
-        let si5324_ext_input = si5324::Input::Ckin2;
-        #[cfg(soc_platform = "kc705")]
-        let si5324_ext_input = si5324::Input::Ckin2;
         match clock_cfg {
             RtioClock::Ext0_Bypass => {
                 info!("using external RTIO clock with PLL bypass");
-                si5324::bypass(si5324_ext_input).expect("cannot bypass Si5324")
+                si5324::bypass(SI5324_EXT_INPUT).expect("cannot bypass Si5324")
             },
             _ => setup_si5324_as_synthesizer(clock_cfg),
         }

artiq/firmware/runtime/sched.rs

@@ -2,21 +2,18 @@
 
 use core::mem;
 use core::result;
-use core::cell::{Cell, RefCell, RefMut};
+use core::cell::{Cell, RefCell};
 use alloc::vec::Vec;
 use fringe::OwnedStack;
 use fringe::generator::{Generator, Yielder, State as GeneratorState};
 use smoltcp::time::Duration;
 use smoltcp::Error as NetworkError;
-use smoltcp::wire::{IpEndpoint, Ipv4Cidr};
+use smoltcp::wire::IpEndpoint;
-use smoltcp::iface::{Interface, SocketHandle};
+use smoltcp::socket::{SocketHandle, SocketRef};
 
 use io::{Read, Write};
 use board_misoc::clock;
 use urc::Urc;
-use board_misoc::ethmac::EthernetDevice;
-use smoltcp::phy::Tracer;
-use ip_addr_storage::InterfaceEx;
 
 #[derive(Fail, Debug)]
 pub enum Error {
@@ -34,6 +31,8 @@ impl From<NetworkError> for Error {
     }
 }
 
+type SocketSet = ::smoltcp::socket::SocketSet<'static, 'static, 'static>;
+
 #[derive(Debug)]
 struct WaitRequest {
     event:   Option<*mut dyn FnMut() -> bool>,
@@ -60,7 +59,7 @@ impl Thread {
     unsafe fn new<F>(io: &Io, stack_size: usize, f: F) -> ThreadHandle
             where F: 'static + FnOnce(Io) + Send {
         let spawned = io.spawned.clone();
-        let network = io.network.clone();
+        let sockets = io.sockets.clone();
 
         // Add a 4k stack guard to the stack of any new threads
         let stack = OwnedStack::new(stack_size + 4096);
@@ -68,8 +67,8 @@ impl Thread {
             generator: Generator::unsafe_new(stack, |yielder, _| {
                 f(Io {
                     yielder: Some(yielder),
-                    spawned,
+                    spawned: spawned,
-                    network
+                    sockets: sockets
                 })
             }),
             waiting_for: WaitRequest {
@@ -116,21 +115,19 @@ impl ThreadHandle {
     }
 }
 
-type Network = Interface<'static, Tracer<EthernetDevice>>;
-
 pub struct Scheduler {
     threads: Vec<ThreadHandle>,
     spawned: Urc<RefCell<Vec<ThreadHandle>>>,
-    network: Urc<RefCell<Network>>,
+    sockets: Urc<RefCell<SocketSet>>,
     run_idx: usize,
 }
 
 impl Scheduler {
-    pub fn new(network: Network) -> Scheduler {
+    pub fn new() -> Scheduler {
         Scheduler {
             threads: Vec::new(),
             spawned: Urc::new(RefCell::new(Vec::new())),
-            network: Urc::new(RefCell::new(network)),
+            sockets: Urc::new(RefCell::new(SocketSet::new(Vec::new()))),
             run_idx: 0,
         }
     }
@@ -139,11 +136,13 @@ impl Scheduler {
         Io {
             yielder: None,
             spawned: self.spawned.clone(),
-            network: self.network.clone()
+            sockets: self.sockets.clone()
         }
     }
 
     pub fn run(&mut self) {
+        self.sockets.borrow_mut().prune();
+
         self.threads.append(&mut *self.spawned.borrow_mut());
         if self.threads.len() == 0 { return }
 
@@ -189,17 +188,8 @@ impl Scheduler {
         }
     }
 
-    pub fn run_network(&mut self) {
+    pub fn sockets(&self) -> &RefCell<SocketSet> {
-        let mut interface = self.network.borrow_mut();
+        &*self.sockets
-        loop {
-            let timestamp = smoltcp::time::Instant::from_millis(clock::get_ms() as i64);
-            match interface.poll(timestamp) {
-                Ok(true) => (),
-                Ok(false) => break,
-                Err(smoltcp::Error::Unrecognized) => (),
-                Err(err) => debug!("network error: {}", err)
-            }
-        }
     }
 }
 
@@ -207,7 +197,7 @@ impl Scheduler {
 pub struct Io<'a> {
     yielder: Option<&'a Yielder<WaitResult, WaitRequest>>,
     spawned: Urc<RefCell<Vec<ThreadHandle>>>,
-    network: Urc<RefCell<Network>>,
+    sockets: Urc<RefCell<SocketSet>>,
 }
 
 impl<'a> Io<'a> {
@@ -274,10 +264,6 @@ impl<'a> Io<'a> {
     pub fn join(&self, handle: ThreadHandle) -> Result<(), Error> {
         self.until(move || handle.terminated())
     }
-
-    pub fn set_ipv4_address(&self, addr: &Ipv4Cidr) {
-        self.network.borrow_mut().update_ipv4_addr(addr)
-    }
 }
 
 #[derive(Clone)]
@@ -305,10 +291,10 @@ impl<'a> Drop for MutexGuard<'a> {
 
 macro_rules! until {
     ($socket:expr, $ty:ty, |$var:ident| $cond:expr) => ({
-        let (network, handle) = ($socket.io.network.clone(), $socket.handle);
+        let (sockets, handle) = ($socket.io.sockets.clone(), $socket.handle);
         $socket.io.until(move || {
-            let mut network = network.borrow_mut();
+            let mut sockets = sockets.borrow_mut();
-            let $var = network.get_socket::<$ty>(handle);
+            let $var = sockets.get::<$ty>(handle);
             $cond
         })
     })
@@ -330,9 +316,9 @@ impl<'a> TcpListener<'a> {
     fn new_lower(io: &'a Io<'a>, buffer_size: usize) -> SocketHandle {
         let rx_buffer = vec![0; buffer_size];
         let tx_buffer = vec![0; buffer_size];
-        io.network
+        io.sockets
             .borrow_mut()
-            .add_socket(TcpSocketLower::new(
+            .add(TcpSocketLower::new(
                 TcpSocketBuffer::new(rx_buffer),
                 TcpSocketBuffer::new(tx_buffer)))
     }
@@ -347,9 +333,9 @@ impl<'a> TcpListener<'a> {
     }
 
     fn with_lower<F, R>(&self, f: F) -> R
-            where F: FnOnce(&mut TcpSocketLower) -> R {
+            where F: FnOnce(SocketRef<TcpSocketLower>) -> R {
-        let mut network = self.io.network.borrow_mut();
+        let mut sockets = self.io.sockets.borrow_mut();
-        let result = f(network.get_socket(self.handle.get()));
+        let result = f(sockets.get(self.handle.get()));
         result
     }
 
@@ -367,7 +353,7 @@ impl<'a> TcpListener<'a> {
 
     pub fn listen<T: Into<IpEndpoint>>(&self, endpoint: T) -> Result<(), Error> {
         let endpoint = endpoint.into();
-        self.with_lower(|s| s.listen(endpoint))
+        self.with_lower(|mut s| s.listen(endpoint))
             .map(|()| {
                 self.endpoint.set(endpoint);
                 ()
@@ -375,18 +361,14 @@ impl<'a> TcpListener<'a> {
             .map_err(|err| err.into())
     }
 
-    /// Accept a TCP connection
-    ///
-    /// When the returned TcpStream is dropped it is immediately forgotten about. In order to
-    /// ensure that pending data is sent and the far end is notified, `close` must be called.
     pub fn accept(&self) -> Result<TcpStream<'a>, Error> {
         // We're waiting until at least one half of the connection becomes open.
         // This handles the case where a remote socket immediately sends a FIN--
         // that still counts as accepting even though nothing may be sent.
-        let (network, handle) = (self.io.network.clone(), self.handle.get());
+        let (sockets, handle) = (self.io.sockets.clone(), self.handle.get());
         self.io.until(move || {
-            let mut network = network.borrow_mut();
+            let mut sockets = sockets.borrow_mut();
-            let socket = network.get_socket::<TcpSocketLower>(handle);
+            let socket = sockets.get::<TcpSocketLower>(handle);
             socket.may_send() || socket.may_recv()
         })?;
 
@@ -403,14 +385,14 @@ impl<'a> TcpListener<'a> {
     }
 
     pub fn close(&self) {
-        self.with_lower(|s| s.close())
+        self.with_lower(|mut s| s.close())
     }
 }
 
 impl<'a> Drop for TcpListener<'a> {
     fn drop(&mut self) {
-        self.with_lower(|s| s.close());
+        self.with_lower(|mut s| s.close());
-        self.io.network.borrow_mut().remove_socket(self.handle.get());
+        self.io.sockets.borrow_mut().release(self.handle.get())
     }
 }
 
@@ -434,9 +416,9 @@ impl<'a> TcpStream<'a> {
     }
 
     fn with_lower<F, R>(&self, f: F) -> R
-            where F: FnOnce(&mut TcpSocketLower) -> R {
+            where F: FnOnce(SocketRef<TcpSocketLower>) -> R {
-        let mut network = self.io.network.borrow_mut();
+        let mut sockets = self.io.sockets.borrow_mut();
-        let result = f(network.get_socket(self.handle));
+        let result = f(sockets.get(self.handle));
         result
     }
 
@@ -473,7 +455,7 @@ impl<'a> TcpStream<'a> {
     }
 
     pub fn set_timeout(&self, value: Option<u64>) {
-        self.with_lower(|s| s.set_timeout(value.map(Duration::from_millis)))
+        self.with_lower(|mut s| s.set_timeout(value.map(Duration::from_millis)))
     }
 
     pub fn keep_alive(&self) -> Option<u64> {
@@ -481,11 +463,11 @@ impl<'a> TcpStream<'a> {
     }
 
     pub fn set_keep_alive(&self, value: Option<u64>) {
-        self.with_lower(|s| s.set_keep_alive(value.map(Duration::from_millis)))
+        self.with_lower(|mut s| s.set_keep_alive(value.map(Duration::from_millis)))
     }
 
     pub fn close(&self) -> Result<(), Error> {
-        self.with_lower(|s| s.close());
+        self.with_lower(|mut s| s.close());
         until!(self, TcpSocketLower, |s| !s.is_open())?;
         // right now the socket may be in TIME-WAIT state. if we don't give it a chance to send
         // a packet, and the user code executes a loop { s.listen(); s.read(); s.close(); }
@@ -499,33 +481,23 @@ impl<'a> Read for TcpStream<'a> {
 
     fn read(&mut self, buf: &mut [u8]) -> Result<usize, Self::ReadError> {
         // Only borrow the underlying socket for the span of the next statement.
-        let result = self.with_lower(|s| s.recv_slice(buf));
+        let result = self.with_lower(|mut s| s.recv_slice(buf));
         match result {
             // Slow path: we need to block until buffer is non-empty.
             Ok(0) => {
                 until!(self, TcpSocketLower, |s| s.can_recv() || !s.may_recv())?;
-                match self.with_lower(|s| s.recv_slice(buf)) {
+                match self.with_lower(|mut s| s.recv_slice(buf)) {
                     Ok(length) => Ok(length),
-                    Err(NetworkError::Finished) |
                     Err(NetworkError::Illegal) => Ok(0),
-                    Err(e) => {
+                    _ => unreachable!()
-                        panic!("Unexpected error from smoltcp: {}", e);
-                    }
                 }
             }
             // Fast path: we had data in buffer.
             Ok(length) => Ok(length),
-            // We've received a fin.
-            Err(NetworkError::Finished) |
             // Error path: the receive half of the socket is not open.
             Err(NetworkError::Illegal) => Ok(0),
             // No other error may be returned.
-            Err(e) => {
+            Err(_) => unreachable!()
-                // This could return Err(Error::Network(e)) rather than panic,
-                // but I expect that'll just cause a panic later perhaps with
-                // less interesting context.
-                panic!("Unexpected error from smoltcp: {}", e);
-            }
         }
     }
 }
@@ -536,12 +508,12 @@ impl<'a> Write for TcpStream<'a> {
 
     fn write(&mut self, buf: &[u8]) -> Result<usize, Self::WriteError> {
         // Only borrow the underlying socket for the span of the next statement.
-        let result = self.with_lower(|s| s.send_slice(buf));
+        let result = self.with_lower(|mut s| s.send_slice(buf));
         match result {
             // Slow path: we need to block until buffer is non-full.
             Ok(0) => {
                 until!(self, TcpSocketLower, |s| s.can_send() || !s.may_send())?;
-                match self.with_lower(|s| s.send_slice(buf)) {
+                match self.with_lower(|mut s| s.send_slice(buf)) {
                     Ok(length) => Ok(length),
                     Err(NetworkError::Illegal) => Ok(0),
                     _ => unreachable!()
@@ -568,62 +540,7 @@ impl<'a> Write for TcpStream<'a> {
 
 impl<'a> Drop for TcpStream<'a> {
     fn drop(&mut self) {
-        // There's no point calling the lower close here unless we also defer the removal of the
+        self.with_lower(|mut s| s.close());
-        // socket from smoltcp until it's had a chance to process the event
+        self.io.sockets.borrow_mut().release(self.handle)
-        let (unsent_bytes, is_open) = self.with_lower(
-            |s| (s.send_queue(), s.is_open())
-        );
-        if is_open {
-            warn!(
-                "Dropping open TcpStream in state {}, with {} unsent bytes",
-                self.with_lower(|s| s.state()), unsent_bytes
-            )
-        } else if unsent_bytes != 0 {
-            debug!("Dropping socket with {} bytes unsent", unsent_bytes)
-        }
-
-        self.io.network.borrow_mut().remove_socket(self.handle);
-    }
-}
-
-pub struct Dhcpv4Socket<'a> {
-    io: &'a Io<'a>,
-    handle: SocketHandle,
-}
-
-impl<'a> Dhcpv4Socket<'a> {
-
-    fn new_lower(io: &'a Io<'a>) -> SocketHandle {
-        let socket = smoltcp::socket::Dhcpv4Socket::new();
-        io.network.borrow_mut().add_socket(socket)
-    }
-
-    pub fn new(io: &'a Io<'a>) -> Self {
-        Self {
-            io,
-            handle: Self::new_lower(io)
-        }
-    }
-
-    fn lower(&mut self) -> RefMut<smoltcp::socket::Dhcpv4Socket> {
-        RefMut::map(
-            self.io.network.borrow_mut(),
-            |network| network.get_socket::<smoltcp::socket::Dhcpv4Socket>(self.handle),
-        )
-    }
-
-    pub fn poll(&mut self) -> Option<smoltcp::socket::Dhcpv4Event> {
-        self.lower().poll()
-    }
-
-    pub fn reset(&mut self) {
-        self.lower().reset()
-    }
-}
-
-impl<'a> Drop for Dhcpv4Socket<'a> {
-    fn drop(&mut self) {
-        let mut network = self.io.network.borrow_mut();
-        network.remove_socket(self.handle);
     }
 }

artiq/firmware/runtime/session.rs

@@ -650,7 +650,6 @@ pub fn thread(io: Io, aux_mutex: &Mutex,
                         error!("session aborted: {}", err);
                     }
                 }
-                stream.close().expect("session: close socket");
             });
         }
 

artiq/firmware/satman/Makefile

@@ -5,8 +5,6 @@ LDFLAGS += -L../libbase
 
 RUSTFLAGS += -Cpanic=abort
 
-export XBUILD_SYSROOT_PATH=$(BUILDINC_DIRECTORY)/../sysroot
-
 all:: satman.bin satman.fbi
 
 .PHONY: $(RUSTOUT)/libsatman.a

artiq/firmware/satman/main.rs

@@ -12,8 +12,6 @@ use core::convert::TryFrom;
 use board_misoc::{csr, ident, clock, uart_logger, i2c, pmp};
 #[cfg(has_si5324)]
 use board_artiq::si5324;
-#[cfg(has_wrpll)]
-use board_artiq::wrpll;
 use board_artiq::{spi, drtioaux};
 use board_artiq::drtio_routing;
 #[cfg(has_hmc830_7043)]
@@ -436,7 +434,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
     n31    : 75,
     n32    : 75,
     bwsel  : 4,
-    crystal_ref: true
+    crystal_as_ckin2: true
 };
 
 #[cfg(all(has_si5324, rtio_frequency = "125.0"))]
@@ -449,7 +447,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
     n31    : 63,
     n32    : 63,
     bwsel  : 4,
-    crystal_ref: true
+    crystal_as_ckin2: true
 };
 
 #[cfg(all(has_si5324, rtio_frequency = "100.0"))]
@@ -462,7 +460,7 @@ const SI5324_SETTINGS: si5324::FrequencySettings
     n31    : 50,
     n32    : 50,
     bwsel  : 4,
-    crystal_ref: true
+    crystal_as_ckin2: true
 };
 
 #[no_mangle]
@@ -488,21 +486,10 @@ pub extern fn main() -> i32 {
     let (mut io_expander0, mut io_expander1);
     #[cfg(all(soc_platform = "kasli", hw_rev = "v2.0"))]
     {
-        io_expander0 = board_misoc::io_expander::IoExpander::new(0);
+        io_expander0 = board_misoc::io_expander::IoExpander::new(0).unwrap();
-        io_expander1 = board_misoc::io_expander::IoExpander::new(1);
+        io_expander1 = board_misoc::io_expander::IoExpander::new(1).unwrap();
         io_expander0.init().expect("I2C I/O expander #0 initialization failed");
         io_expander1.init().expect("I2C I/O expander #1 initialization failed");
-        #[cfg(has_wrpll)]
-        {
-            io_expander0.set_oe(1, 1 << 7).unwrap();
-            io_expander0.set(1, 7, true);
-            io_expander0.service().unwrap();
-            io_expander1.set_oe(0, 1 << 7).unwrap();
-            io_expander1.set_oe(1, 1 << 7).unwrap();
-            io_expander1.set(0, 7, true);
-            io_expander1.set(1, 7, true);
-            io_expander1.service().unwrap();
-        }
 
         // Actively drive TX_DISABLE to false on SFP0..3
         io_expander0.set_oe(0, 1 << 1).unwrap();
@@ -519,8 +506,6 @@ pub extern fn main() -> i32 {
 
     #[cfg(has_si5324)]
     si5324::setup(&SI5324_SETTINGS, si5324::Input::Ckin1).expect("cannot initialize Si5324");
-    #[cfg(has_wrpll)]
-    wrpll::init();
 
     unsafe {
         csr::drtio_transceiver::stable_clkin_write(1);
@@ -530,8 +515,6 @@ pub extern fn main() -> i32 {
     unsafe {
         csr::drtio_transceiver::txenable_write(0xffffffffu32 as _);
     }
-    #[cfg(has_wrpll)]
-    wrpll::diagnostics();
     init_rtio_crg();
 
     #[cfg(has_hmc830_7043)]
@@ -582,8 +565,6 @@ pub extern fn main() -> i32 {
             si5324::siphaser::select_recovered_clock(true).expect("failed to switch clocks");
             si5324::siphaser::calibrate_skew().expect("failed to calibrate skew");
         }
-        #[cfg(has_wrpll)]
-        wrpll::select_recovered_clock(true);
 
         drtioaux::reset(0);
         drtiosat_reset(false);
@@ -632,7 +613,7 @@ pub extern fn main() -> i32 {
                 if is_up && !was_up {
                     /*
                      * One side of the JESD204 elastic buffer is clocked by the jitter filter
-                     * (Si5324 or WRPLL), the other by the RTM.
+                     * (Si5324), the other by the RTM.
                      * The elastic buffer can operate only when those two clocks are derived from
                      * the same oscillator.
                      * This is the case when either of those conditions is true:
@@ -664,8 +645,6 @@ pub extern fn main() -> i32 {
         info!("uplink is down, switching to local oscillator clock");
         #[cfg(has_si5324)]
         si5324::siphaser::select_recovered_clock(false).expect("failed to switch clocks");
-        #[cfg(has_wrpll)]
-        wrpll::select_recovered_clock(false);
     }
 }
 

artiq/frontend/artiq_dashboard.py

@@ -248,9 +248,8 @@ def main():
         server_description = server_name + " ({})".format(args.server)
     else:
         server_description = args.server
-    logging.info("ARTIQ dashboard version: %s",
+    logging.info("ARTIQ dashboard %s connected to master %s",
-                 artiq_version)
+                 artiq_version, server_description)
-    logging.info("ARTIQ dashboard connected to moninj_proxy (%s)", server_description)
     # run
     main_window.show()
     loop.run_until_complete(main_window.exit_request.wait())

artiq/frontend/artiq_ddb_template.py

@@ -173,6 +173,11 @@ class PeripheralManager:
         urukul_name = self.get_name("urukul")
         synchronization = peripheral["synchronization"]
         channel = count(0)
+        pll_en = peripheral["pll_en"]
+        dds = peripheral["dds"]
+        if dds == "ad9912" and not pll_en:
+            raise ValueError("PLL bypass is not supported on AD9912")
+
         self.gen("""
             device_db["eeprom_{name}"] = {{
                 "type": "local",
@@ -231,14 +236,15 @@ class PeripheralManager:
                     "sync_device": {sync_device},
                     "io_update_device": "ttl_{name}_io_update",
                     "refclk": {refclk},
-                    "clk_sel": {clk_sel}
+                    "clk_sel": {clk_sel},
+                    "clk_div": {clk_div}
                 }}
             }}""",
             name=urukul_name,
             sync_device="\"ttl_{name}_sync\"".format(name=urukul_name) if synchronization else "None",
             refclk=peripheral.get("refclk", self.master_description["rtio_frequency"]),
-            clk_sel=peripheral["clk_sel"])
+            clk_sel=peripheral["clk_sel"],
-        dds = peripheral["dds"]
+            clk_div= 0 if pll_en else 1)
         pll_vco = peripheral.get("pll_vco")
         for i in range(4):
             if dds == "ad9910":
@@ -248,6 +254,7 @@ class PeripheralManager:
                         "module": "artiq.coredevice.ad9910",
                         "class": "AD9910",
                         "arguments": {{
+                            "pll_en": {pll_en},
                             "pll_n": {pll_n},
                             "chip_select": {chip_select},
                             "cpld_device": "{name}_cpld"{sw}{pll_vco}{sync_delay_seed}{io_update_delay}
@@ -258,7 +265,7 @@ class PeripheralManager:
                     uchn=i,
                     sw=",\n        \"sw_device\": \"ttl_{name}_sw{uchn}\"".format(name=urukul_name, uchn=i) if len(peripheral["ports"]) > 1 else "",
                     pll_vco=",\n        \"pll_vco\": {}".format(pll_vco) if pll_vco is not None else "",
-                    pll_n=peripheral.get("pll_n", 32),
+                    pll_n=peripheral.get("pll_n", 32), pll_en=pll_en,
                     sync_delay_seed=",\n        \"sync_delay_seed\": \"eeprom_{}:{}\"".format(urukul_name, 64 + 4*i) if synchronization else "",
                     io_update_delay=",\n        \"io_update_delay\": \"eeprom_{}:{}\"".format(urukul_name, 64 + 4*i) if synchronization else "")
             elif dds == "ad9912":
@@ -552,10 +559,11 @@ class PeripheralManager:
                 "type": "local",
                 "module": "artiq.coredevice.fastino",
                 "class": "Fastino",
-                "arguments": {{"channel": 0x{channel:06x}}}
+                "arguments": {{"channel": 0x{channel:06x}, "log2_width": {log2_width}}}
             }}""",
             name=self.get_name("fastino"),
-            channel=rtio_offset)
+            channel=rtio_offset,
+            log2_width=peripheral["log2_width"])
         return 1
 
     def process_phaser(self, rtio_offset, peripheral):

artiq/gateware/drtio/transceiver/gtx_7series.py

@@ -74,6 +74,8 @@ class GTX_20X(Module):
                 p_CPLL_REFCLK_DIV=1,
                 p_RXOUT_DIV=2,
                 p_TXOUT_DIV=2,
+                p_CPLL_INIT_CFG=0x00001E,
+                p_CPLL_LOCK_CFG=0x01C0,
                 i_CPLLRESET=cpllreset,
                 i_CPLLPD=cpllreset,
                 o_CPLLLOCK=cplllock,
@@ -290,13 +292,15 @@ class GTX(Module, TransceiverInterface):
         # # #
 
         refclk = Signal()
-        stable_clkin_n = Signal()
+        stable_clkin = Signal()
         self.specials += Instance("IBUFDS_GTE2",
-            i_CEB=stable_clkin_n,
+            i_CEB=~stable_clkin,
             i_I=clock_pads.p,
             i_IB=clock_pads.n,
-            o_O=refclk
+            o_O=refclk,
-        )
+            p_CLKCM_CFG="TRUE",
+            p_CLKRCV_TRST="TRUE",
+            p_CLKSWING_CFG=3)
 
         rtio_tx_clk = Signal()
         channel_interfaces = []
@@ -323,7 +327,6 @@ class GTX(Module, TransceiverInterface):
         TransceiverInterface.__init__(self, channel_interfaces)
         for n, gtx in enumerate(self.gtxs):
             self.comb += [
-                stable_clkin_n.eq(~self.stable_clkin.storage),
                 gtx.txenable.eq(self.txenable.storage[n])
             ]
 
@@ -332,6 +335,9 @@ class GTX(Module, TransceiverInterface):
             self.cd_rtio.clk.eq(self.gtxs[master].cd_rtio_tx.clk),
             self.cd_rtio.rst.eq(reduce(or_, [gtx.cd_rtio_tx.rst for gtx in self.gtxs]))
         ]
+
+        self.comb += stable_clkin.eq(self.stable_clkin.storage | self.gtxs[0].tx_init.cplllock)
+
         # Connect slave i's `rtio_rx` clock to `rtio_rxi` clock
         for i in range(nchannels):
             self.comb += [

artiq/gateware/drtio/transceiver/gtx_7series_init.py

@@ -108,9 +108,9 @@ class GTXInit(Module):
 
         startup_fsm.act("INITIAL",
             startup_timer.wait.eq(1),
-            If(startup_timer.done, NextState("RESET_ALL"))
+            If(startup_timer.done, NextState("RESET_PLL"))
         )
-        startup_fsm.act("RESET_ALL",
+        startup_fsm.act("RESET_PLL",
             gtXxreset.eq(1),
             self.cpllreset.eq(1),
             pll_reset_timer.wait.eq(1),
@@ -118,19 +118,24 @@ class GTXInit(Module):
         )
         startup_fsm.act("RELEASE_PLL_RESET",
             gtXxreset.eq(1),
-            If(cplllock, NextState("RELEASE_GTH_RESET"))
+            If(cplllock, NextState("RESET_GTX"))
+        )
+        startup_fsm.act("RESET_GTX",
+            gtXxreset.eq(1),
+            pll_reset_timer.wait.eq(1),
+            If(pll_reset_timer.done, NextState("RELEASE_GTX_RESET"))
         )
         # Release GTX reset and wait for GTX resetdone
         # (from UG476, GTX is reset on falling edge
         # of gttxreset)
         if rx:
-            startup_fsm.act("RELEASE_GTH_RESET",
+            startup_fsm.act("RELEASE_GTX_RESET",
                 Xxuserrdy.eq(1),
                 cdr_stable_timer.wait.eq(1),
                 If(Xxresetdone & cdr_stable_timer.done, NextState("DELAY_ALIGN"))
             )
         else:
-            startup_fsm.act("RELEASE_GTH_RESET",
+            startup_fsm.act("RELEASE_GTX_RESET",
                 Xxuserrdy.eq(1),
                 If(Xxresetdone, NextState("DELAY_ALIGN"))
             )
@@ -227,7 +232,7 @@ class GTXInit(Module):
         startup_fsm.act("READY",
             Xxuserrdy.eq(1),
             self.done.eq(1),
-            If(self.restart, NextState("RESET_ALL"))
+            If(self.restart, NextState("RESET_GTX"))
         )
 
 

artiq/gateware/drtio/wrpll/__init__.py

@@ -1,2 +0,0 @@
-from artiq.gateware.drtio.wrpll.core import WRPLL
-from artiq.gateware.drtio.wrpll.ddmtd import DDMTDSamplerExtFF, DDMTDSamplerGTP

artiq/gateware/drtio/wrpll/core.py

@@ -1,156 +0,0 @@
-from migen import *
-from migen.genlib.resetsync import AsyncResetSynchronizer
-from migen.genlib.cdc import MultiReg, PulseSynchronizer
-from misoc.interconnect.csr import *
-
-from artiq.gateware.drtio.wrpll.si549 import Si549
-from artiq.gateware.drtio.wrpll.ddmtd import DDMTD, Collector
-from artiq.gateware.drtio.wrpll import thls, filters
-
-
-class FrequencyCounter(Module, AutoCSR):
-    def __init__(self, timer_width=23, counter_width=23, domains=["helper", "rtio", "rtio_rx0"]):
-        for domain in domains:
-            name = "counter_" + domain
-            counter = CSRStatus(counter_width, name=name)
-            setattr(self, name, counter)
-        self.update_en = CSRStorage()
-
-        timer = Signal(timer_width)
-        timer_tick = Signal()
-        self.sync += Cat(timer, timer_tick).eq(timer + 1)
-
-        for domain in domains:
-            sync_domain = getattr(self.sync, domain)
-            divider = Signal(2)
-            sync_domain += divider.eq(divider + 1)
-
-            divided = Signal()
-            divided.attr.add("no_retiming")
-            sync_domain += divided.eq(divider[-1])
-            divided_sys = Signal()
-            self.specials += MultiReg(divided, divided_sys)
-
-            divided_sys_r = Signal()
-            divided_tick = Signal()
-            self.sync += divided_sys_r.eq(divided_sys)
-            self.comb += divided_tick.eq(divided_sys & ~divided_sys_r)
-
-            counter = Signal(counter_width)
-            counter_csr = getattr(self, "counter_" + domain)
-            self.sync += [
-                If(timer_tick,
-                    If(self.update_en.storage, counter_csr.status.eq(counter)),
-                    counter.eq(0),
-                ).Else(
-                    If(divided_tick, counter.eq(counter + 1))
-                )
-            ]
-
-
-class WRPLL(Module, AutoCSR):
-    def __init__(self, helper_clk_pads, main_dcxo_i2c, helper_dxco_i2c, ddmtd_inputs, N=15):
-        self.helper_reset = CSRStorage(reset=1)
-        self.collector_reset = CSRStorage(reset=1)
-        self.filter_reset = CSRStorage(reset=1)
-        self.adpll_offset_helper = CSRStorage(24)
-        self.adpll_offset_main = CSRStorage(24)
-
-        self.tag_arm = CSR()
-        self.main_diff_tag = CSRStatus(32)
-        self.helper_diff_tag = CSRStatus(32)
-        self.ref_tag = CSRStatus(N)
-        self.main_tag = CSRStatus(N)
-
-        main_diff_tag_32 = Signal((32, True))
-        helper_diff_tag_32 = Signal((32, True))
-        self.comb += [
-            self.main_diff_tag.status.eq(main_diff_tag_32),
-            self.helper_diff_tag.status.eq(helper_diff_tag_32)
-        ]
-
-        self.clock_domains.cd_helper = ClockDomain()
-        self.clock_domains.cd_collector = ClockDomain()
-        self.clock_domains.cd_filter = ClockDomain()
-        self.helper_reset.storage.attr.add("no_retiming")
-        self.filter_reset.storage.attr.add("no_retiming")
-        self.specials += Instance("IBUFGDS",
-                i_I=helper_clk_pads.p, i_IB=helper_clk_pads.n,
-                o_O=self.cd_helper.clk)
-        self.comb += [
-            self.cd_collector.clk.eq(self.cd_collector.clk),
-            self.cd_filter.clk.eq(self.cd_helper.clk),
-        ]
-        self.specials += [
-            AsyncResetSynchronizer(self.cd_helper, self.helper_reset.storage),
-            AsyncResetSynchronizer(self.cd_collector, self.collector_reset.storage),
-            AsyncResetSynchronizer(self.cd_filter, self.filter_reset.storage)
-        ]
-
-        self.submodules.helper_dcxo = Si549(helper_dxco_i2c)
-        self.submodules.main_dcxo = Si549(main_dcxo_i2c)
-
-        # for diagnostics and PLL initialization
-        self.submodules.frequency_counter = FrequencyCounter()
-
-        ddmtd_counter = Signal(N)
-        self.sync.helper += ddmtd_counter.eq(ddmtd_counter + 1)
-        self.submodules.ddmtd_ref = DDMTD(ddmtd_counter, ddmtd_inputs.rec_clk)
-        self.submodules.ddmtd_main = DDMTD(ddmtd_counter, ddmtd_inputs.main_xo)
-
-        collector_cd = ClockDomainsRenamer("collector")
-        filter_cd = ClockDomainsRenamer("filter")
-        self.submodules.collector = collector_cd(Collector(N))
-        self.submodules.filter_helper = filter_cd(
-            thls.make(filters.helper, data_width=48))
-        self.submodules.filter_main = filter_cd(
-            thls.make(filters.main, data_width=48))
-
-        self.comb += [
-            self.collector.tag_ref.eq(self.ddmtd_ref.h_tag),
-            self.collector.ref_stb.eq(self.ddmtd_ref.h_tag_update),
-            self.collector.tag_main.eq(self.ddmtd_main.h_tag),
-            self.collector.main_stb.eq(self.ddmtd_main.h_tag_update)
-        ]
-
-        collector_stb_ps = PulseSynchronizer("helper", "sys")
-        self.submodules += collector_stb_ps
-        self.sync.helper += collector_stb_ps.i.eq(self.collector.out_stb)
-        collector_stb_sys = Signal()
-        self.sync += collector_stb_sys.eq(collector_stb_ps.o)
-
-        main_diff_tag_sys = Signal((N+2, True))
-        helper_diff_tag_sys = Signal((N+2, True))
-        ref_tag_sys = Signal(N)
-        main_tag_sys = Signal(N)
-        self.specials += MultiReg(self.collector.out_main, main_diff_tag_sys)
-        self.specials += MultiReg(self.collector.out_helper, helper_diff_tag_sys)
-        self.specials += MultiReg(self.collector.tag_ref, ref_tag_sys)
-        self.specials += MultiReg(self.collector.tag_main, main_tag_sys)
-
-        self.sync += [
-            If(self.tag_arm.re & self.tag_arm.r, self.tag_arm.w.eq(1)),
-            If(collector_stb_sys,
-               self.tag_arm.w.eq(0),
-               If(self.tag_arm.w,
-                  main_diff_tag_32.eq(main_diff_tag_sys),
-                  helper_diff_tag_32.eq(helper_diff_tag_sys),
-                  self.ref_tag.status.eq(ref_tag_sys),
-                  self.main_tag.status.eq(main_tag_sys)
-                 )
-              )
-        ]
-
-        self.comb += [
-            self.filter_helper.input.eq(self.collector.out_helper << 22),
-            self.filter_helper.input_stb.eq(self.collector.out_stb),
-            self.filter_main.input.eq(self.collector.out_main),
-            self.filter_main.input_stb.eq(self.collector.out_stb)
-        ]
-
-        self.sync.helper += [
-            self.helper_dcxo.adpll_stb.eq(self.filter_helper.output_stb),
-            self.helper_dcxo.adpll.eq(self.filter_helper.output + self.adpll_offset_helper.storage),
-            self.main_dcxo.adpll_stb.eq(self.filter_main.output_stb),
-            self.main_dcxo.adpll.eq(self.filter_main.output + self.adpll_offset_main.storage)
-        ]

artiq/gateware/drtio/wrpll/ddmtd.py

@@ -1,221 +0,0 @@
-from migen import *
-from migen.genlib.cdc import PulseSynchronizer, MultiReg
-from migen.genlib.fsm import FSM
-from misoc.interconnect.csr import *
-
-
-class DDMTDSamplerExtFF(Module):
-    def __init__(self, ddmtd_inputs):
-        self.rec_clk = Signal()
-        self.main_xo = Signal()
-
-        # # #
-
-        # TODO: s/h timing at FPGA pads
-        if hasattr(ddmtd_inputs, "rec_clk"):
-            rec_clk_1 = ddmtd_inputs.rec_clk
-        else:
-            rec_clk_1 = Signal()
-            self.specials += Instance("IBUFDS",
-                i_I=ddmtd_inputs.rec_clk_p, i_IB=ddmtd_inputs.rec_clk_n,
-                o_O=rec_clk_1)
-        if hasattr(ddmtd_inputs, "main_xo"):
-            main_xo_1 = ddmtd_inputs.main_xo
-        else:
-            main_xo_1 = Signal()
-            self.specials += Instance("IBUFDS",
-                i_I=ddmtd_inputs.main_xo_p, i_IB=ddmtd_inputs.main_xo_n,
-                o_O=main_xo_1)
-        self.specials += [
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=rec_clk_1, o_Q=self.rec_clk,
-                attr={("IOB", "TRUE")}),
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=main_xo_1, o_Q=self.main_xo,
-                attr={("IOB", "TRUE")}),
-        ]
-
-
-class DDMTDSamplerGTP(Module):
-    def __init__(self, gtp, main_xo_pads):
-        self.rec_clk = Signal()
-        self.main_xo = Signal()
-
-        # # #
-
-        # Getting the main XO signal from IBUFDS_GTE2 is problematic because
-        # the transceiver PLL craps out if an improper clock signal is applied,
-        # so we are disabling the buffer until the clock is stable.
-        main_xo_se = Signal()
-        rec_clk_1 = Signal()
-        main_xo_1 = Signal()
-        self.specials += [
-            Instance("IBUFDS",
-                i_I=main_xo_pads.p, i_IB=main_xo_pads.n,
-                o_O=main_xo_se),
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=gtp.cd_rtio_rx0.clk, o_Q=rec_clk_1,
-                attr={("DONT_TOUCH", "TRUE")}),
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=rec_clk_1, o_Q=self.rec_clk,
-                attr={("DONT_TOUCH", "TRUE")}),
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=main_xo_se, o_Q=main_xo_1,
-                attr={("IOB", "TRUE")}),
-            Instance("FD", i_C=ClockSignal("helper"),
-                i_D=main_xo_1, o_Q=self.main_xo,
-                attr={("DONT_TOUCH", "TRUE")}),
-        ]
-
-
-class DDMTDDeglitcherFirstEdge(Module):
-    def __init__(self, input_signal, blind_period=128):
-        self.detect = Signal()
-        self.tag_correction = 0
-
-        rising = Signal()
-        input_signal_r = Signal()
-        self.sync.helper += [
-            input_signal_r.eq(input_signal),
-            rising.eq(input_signal & ~input_signal_r)
-        ]
-
-        blind_counter = Signal(max=blind_period)
-        self.sync.helper += [
-            If(blind_counter != 0, blind_counter.eq(blind_counter - 1)),
-            If(input_signal_r, blind_counter.eq(blind_period - 1)),
-            self.detect.eq(rising & (blind_counter == 0))
-        ]
-
-
-class DDMTD(Module):
-    def __init__(self, counter, input_signal):
-
-        # in helper clock domain
-        self.h_tag = Signal(len(counter))
-        self.h_tag_update = Signal()
-
-        # # #
-
-        deglitcher = DDMTDDeglitcherFirstEdge(input_signal)
-        self.submodules += deglitcher
-
-        self.sync.helper += [
-            self.h_tag_update.eq(0),
-            If(deglitcher.detect,
-                self.h_tag_update.eq(1),
-                self.h_tag.eq(counter + deglitcher.tag_correction)
-            )
-        ]
-
-
-class Collector(Module):
-    """Generates loop filter inputs from DDMTD outputs.
-
-    The input to the main DCXO lock loop filter is the difference between the
-    reference and main tags after unwrapping (see below).
-
-    The input to the helper DCXO lock loop filter is the difference between the
-    current reference tag and the previous reference tag after unwrapping.
-
-    When the WR PLL is locked, the following ideally (no noise/jitter) obtain:
-    - f_main = f_ref
-    - f_helper = f_ref * 2^N/(2^N+1)
-    - f_beat = f_ref - f_helper = f_ref / (2^N + 1) (cycle time is: dt=1/f_beat)
-    - the reference and main DCXO tags are equal to each other at every cycle
-      (the main DCXO lock drives this difference to 0)
-    - the reference and main DCXO tags both have the same value at each cycle
-      (the tag difference for each DDMTD is given by
-      f_helper*dt = f_helper/f_beat = 2^N, which causes the N-bit DDMTD counter
-      to wrap around and come back to its previous value)
-
-    Note that we currently lock the frequency of the helper DCXO to the
-    reference clock, not it's phase. As a result, while the tag differences are
-    controlled, their absolute values are arbitrary. We could consider moving
-    the helper lock to a phase lock at some point in the future...
-
-    Since the DDMTD counter is only N bits, it is possible for tag values to
-    wrap around. This will happen frequently if the locked tags happens to be
-    near the edges of the counter, so that jitter can easily cause a phase wrap.
-    But, it can also easily happen during lock acquisition or other transients.
-    To avoid glitches in the output, we unwrap the tag differences. Currently
-    we do this in hardware, but we should consider extending the processor to
-    allow us to do it inside the filters. Since the processor uses wider
-    signals, this would significantly extend the overall glitch-free
-    range of the PLL and may aid lock acquisition.
-    """
-    def __init__(self, N):
-        self.ref_stb = Signal()
-        self.main_stb = Signal()
-        self.tag_ref = Signal(N)
-        self.tag_main = Signal(N)
-
-        self.out_stb = Signal()
-        self.out_main = Signal((N+2, True))
-        self.out_helper = Signal((N+2, True))
-        self.out_tag_ref = Signal(N)
-        self.out_tag_main = Signal(N)
-
-        tag_ref_r = Signal(N)
-        tag_main_r = Signal(N)
-        main_tag_diff = Signal((N+2, True))
-        helper_tag_diff = Signal((N+2, True))
-
-        # # #
-
-        fsm = FSM(reset_state="IDLE")
-        self.submodules += fsm
-
-        fsm.act("IDLE",
-            NextValue(self.out_stb, 0),
-            If(self.ref_stb & self.main_stb,
-                NextValue(tag_ref_r, self.tag_ref),
-                NextValue(tag_main_r, self.tag_main),
-                NextState("DIFF")
-            ).Elif(self.ref_stb,
-                NextValue(tag_ref_r, self.tag_ref),
-                NextState("WAITMAIN")
-            ).Elif(self.main_stb,
-                NextValue(tag_main_r, self.tag_main),
-                NextState("WAITREF")
-            )
-        )
-        fsm.act("WAITREF",
-            If(self.ref_stb,
-                NextValue(tag_ref_r, self.tag_ref),
-                NextState("DIFF")
-            )
-        )
-        fsm.act("WAITMAIN",
-            If(self.main_stb,
-                NextValue(tag_main_r, self.tag_main),
-                NextState("DIFF")
-            )
-        )
-        fsm.act("DIFF",
-            NextValue(main_tag_diff, tag_main_r - tag_ref_r),
-            NextValue(helper_tag_diff, tag_ref_r - self.out_tag_ref),
-            NextState("UNWRAP")
-        )
-        fsm.act("UNWRAP",
-            If(main_tag_diff - self.out_main > 2**(N-1),
-               NextValue(main_tag_diff, main_tag_diff - 2**N)
-            ).Elif(self.out_main - main_tag_diff > 2**(N-1),
-               NextValue(main_tag_diff, main_tag_diff + 2**N)
-            ),
-
-            If(helper_tag_diff - self.out_helper > 2**(N-1),
-               NextValue(helper_tag_diff, helper_tag_diff - 2**N)
-            ).Elif(self.out_helper - helper_tag_diff > 2**(N-1),
-               NextValue(helper_tag_diff, helper_tag_diff + 2**N)
-            ),
-            NextState("OUTPUT")
-        )
-        fsm.act("OUTPUT",
-            NextValue(self.out_tag_ref, tag_ref_r),
-            NextValue(self.out_tag_main, tag_main_r),
-            NextValue(self.out_main, main_tag_diff),
-            NextValue(self.out_helper, helper_tag_diff),
-            NextValue(self.out_stb, 1),
-            NextState("IDLE")
-        )

artiq/gateware/drtio/wrpll/filters.py

@@ -1,61 +0,0 @@
-helper_xn1 = 0
-helper_xn2 = 0
-helper_yn0 = 0
-helper_yn1 = 0
-helper_yn2 = 0
-helper_out = 0
-
-main_xn1 = 0
-main_xn2 = 0
-main_yn0 = 0
-main_yn1 = 0
-main_yn2 = 0
-
-
-def helper(tag_diff):
-    global helper_xn1, helper_xn2, helper_yn0, \
-        helper_yn1, helper_yn2, helper_out
-
-    helper_xn0 = 0 - tag_diff # *(2**22)
-
-    helper_yr = 4294967296
-
-    helper_yn2 = helper_yn1
-    helper_yn1 = helper_yn0
-
-    helper_yn0 = (284885690 * (helper_xn0
-                                + (217319150 * helper_xn1 >> 44)
-                                - (17591968725108 * helper_xn2 >> 44)
-                                ) >> 44
-                  ) + (35184372088832*helper_yn1 >> 44) - helper_yn2
-
-    helper_xn2 = helper_xn1
-    helper_xn1 = helper_xn0
-
-    helper_out = 268435456*helper_yn0 >> 44
-    helper_out = min(helper_out, helper_yr)
-    helper_out = max(helper_out, 0 - helper_yr)
-
-    return helper_out
-
-
-def main(main_xn0):
-    global main_xn1, main_xn2, main_yn0, main_yn1, main_yn2
-
-    main_yr = 4294967296
-
-    main_yn2 = main_yn1
-    main_yn1 = main_yn0
-    main_yn0 = (
-               ((133450380908*(((35184372088832*main_xn0) >> 44) +
-                ((17592186044417*main_xn1) >> 44))) >> 44) +
-               ((29455872930889*main_yn1) >> 44) -
-               ((12673794781453*main_yn2) >> 44))
-
-    main_xn2 = main_xn1
-    main_xn1 = main_xn0
-
-    main_yn0 = min(main_yn0, main_yr)
-    main_yn0 = max(main_yn0, 0 - main_yr)
-
-    return main_yn0

artiq/gateware/drtio/wrpll/si549.py

@@ -1,340 +0,0 @@
-from migen import *
-from migen.genlib.fsm import *
-from migen.genlib.cdc import MultiReg, PulseSynchronizer, BlindTransfer
-
-from misoc.interconnect.csr import *
-
-
-class I2CClockGen(Module):
-    def __init__(self, width):
-        self.load  = Signal(width)
-        self.clk2x = Signal()
-
-        cnt = Signal.like(self.load)
-        self.comb += [
-            self.clk2x.eq(cnt == 0),
-        ]
-        self.sync += [
-            If(self.clk2x,
-                cnt.eq(self.load),
-            ).Else(
-                cnt.eq(cnt - 1),
-            )
-        ]
-
-
-class I2CMasterMachine(Module):
-    def __init__(self, clock_width):
-        self.scl   = Signal(reset=1)
-        self.sda_o = Signal(reset=1)
-        self.sda_i = Signal()
-
-        self.submodules.cg  = CEInserter()(I2CClockGen(clock_width))
-        self.start = Signal()
-        self.stop  = Signal()
-        self.write = Signal()
-        self.ack   = Signal()
-        self.data  = Signal(8)
-        self.ready = Signal()
-
-        ###
-
-        bits = Signal(4)
-        data = Signal(8)
-
-        fsm = CEInserter()(FSM("IDLE"))
-        self.submodules += fsm
-
-        fsm.act("IDLE",
-            self.ready.eq(1),
-            If(self.start,
-                NextState("START0"),
-            ).Elif(self.stop,
-                NextState("STOP0"),
-            ).Elif(self.write,
-                NextValue(bits, 8),
-                NextValue(data, self.data),
-                NextState("WRITE0")
-            )
-        )
-
-        fsm.act("START0",
-            NextValue(self.scl, 1),
-            NextState("START1")
-        )
-        fsm.act("START1",
-            NextValue(self.sda_o, 0),
-            NextState("IDLE")
-        )
-
-        fsm.act("STOP0",
-            NextValue(self.scl, 0),
-            NextState("STOP1")
-        )
-        fsm.act("STOP1",
-            NextValue(self.sda_o, 0),
-            NextState("STOP2")
-        )
-        fsm.act("STOP2",
-            NextValue(self.scl, 1),
-            NextState("STOP3")
-        )
-        fsm.act("STOP3",
-            NextValue(self.sda_o, 1),
-            NextState("IDLE")
-        )
-
-        fsm.act("WRITE0",
-            NextValue(self.scl, 0),
-            NextState("WRITE1")
-        )
-        fsm.act("WRITE1",
-            If(bits == 0,
-                NextValue(self.sda_o, 1),
-                NextState("READACK0"),
-            ).Else(
-                NextValue(self.sda_o, data[7]),
-                NextState("WRITE2"),
-            )
-        )
-        fsm.act("WRITE2",
-            NextValue(self.scl, 1),
-            NextValue(data[1:], data[:-1]),
-            NextValue(bits, bits - 1),
-            NextState("WRITE0"),
-        )
-        fsm.act("READACK0",
-            NextValue(self.scl, 1),
-            NextState("READACK1"),
-        )
-        fsm.act("READACK1",
-            NextValue(self.ack, ~self.sda_i),
-            NextState("IDLE")
-        )
-
-        run = Signal()
-        idle = Signal()
-        self.comb += [
-            run.eq((self.start | self.stop | self.write) & self.ready),
-            idle.eq(~run & fsm.ongoing("IDLE")),
-            self.cg.ce.eq(~idle),
-            fsm.ce.eq(run | self.cg.clk2x),
-        ]
-
-
-class ADPLLProgrammer(Module):
-    def __init__(self):
-        self.i2c_divider = Signal(16)
-        self.i2c_address = Signal(7)
-
-        self.adpll = Signal(24)
-        self.stb = Signal()
-        self.busy = Signal()
-        self.nack = Signal()
-
-        self.scl = Signal()
-        self.sda_i = Signal()
-        self.sda_o = Signal()
-
-        self.scl.attr.add("no_retiming")
-        self.sda_o.attr.add("no_retiming")
-
-        # # #
-
-        master = I2CMasterMachine(16)
-        self.submodules += master
-
-        self.comb += [
-            master.cg.load.eq(self.i2c_divider),
-            self.scl.eq(master.scl),
-            master.sda_i.eq(self.sda_i),
-            self.sda_o.eq(master.sda_o)
-        ]
-
-        fsm = FSM()
-        self.submodules += fsm
-
-        adpll = Signal.like(self.adpll)
-
-        fsm.act("IDLE",
-            If(self.stb,
-                NextValue(adpll, self.adpll),
-                NextState("START")
-            )
-        )
-        fsm.act("START",
-            master.start.eq(1),
-            If(master.ready, NextState("DEVADDRESS"))
-        )
-        fsm.act("DEVADDRESS",
-            master.data.eq(self.i2c_address << 1),
-            master.write.eq(1),
-            If(master.ready, NextState("REGADRESS"))
-        )
-        fsm.act("REGADRESS",
-            master.data.eq(231),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA0")
-                ).Else(
-                    self.nack.eq(1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA0",
-            master.data.eq(adpll[0:8]),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA1")
-                ).Else(
-                    self.nack.eq(1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA1",
-            master.data.eq(adpll[8:16]),
-            master.write.eq(1),
-            If(master.ready,
-                If(master.ack,
-                    NextState("DATA2")
-                ).Else(
-                    self.nack.eq(1),
-                    NextState("STOP")
-                )
-            )
-        )
-        fsm.act("DATA2",
-            master.data.eq(adpll[16:24]),
-            master.write.eq(1),
-            If(master.ready,
-                If(~master.ack, self.nack.eq(1)),
-                NextState("STOP")
-            )
-        )
-        fsm.act("STOP",
-            master.stop.eq(1),
-            If(master.ready,
-                If(~master.ack, self.nack.eq(1)),
-                NextState("IDLE")
-            )
-        )
-
-        self.comb += self.busy.eq(~fsm.ongoing("IDLE"))
-
-
-def simulate_programmer():
-    from migen.sim.core import run_simulation
-
-    dut = ADPLLProgrammer()
-
-    def generator():
-        yield dut.i2c_divider.eq(4)
-        yield dut.i2c_address.eq(0x55)
-        yield
-        yield dut.adpll.eq(0x123456)
-        yield dut.stb.eq(1)
-        yield
-        yield dut.stb.eq(0)
-        yield
-        while (yield dut.busy):
-            yield
-        for _ in range(20):
-            yield
-
-    run_simulation(dut, generator(), vcd_name="tb.vcd")
-
-
-class Si549(Module, AutoCSR):
-    def __init__(self, pads):
-        self.gpio_enable = CSRStorage(reset=1)
-        self.gpio_in = CSRStatus(2)
-        self.gpio_out = CSRStorage(2)
-        self.gpio_oe = CSRStorage(2)
-
-        self.i2c_divider = CSRStorage(16, reset=75)
-        self.i2c_address = CSRStorage(7)
-        self.errors = CSR(2)
-
-        # in helper clock domain
-        self.adpll = Signal(24)
-        self.adpll_stb = Signal()
-
-        # # #
-
-        programmer = ClockDomainsRenamer("helper")(ADPLLProgrammer())
-        self.submodules += programmer
-
-        self.i2c_divider.storage.attr.add("no_retiming")
-        self.i2c_address.storage.attr.add("no_retiming")
-        self.specials += [
-            MultiReg(self.i2c_divider.storage, programmer.i2c_divider, "helper"),
-            MultiReg(self.i2c_address.storage, programmer.i2c_address, "helper")
-        ]
-        self.comb += [
-            programmer.adpll.eq(self.adpll),
-            programmer.stb.eq(self.adpll_stb)
-        ]
-
-        self.gpio_enable.storage.attr.add("no_retiming")
-        self.gpio_out.storage.attr.add("no_retiming")
-        self.gpio_oe.storage.attr.add("no_retiming")
-
-        # SCL GPIO and mux
-        ts_scl = TSTriple(1)
-        self.specials += ts_scl.get_tristate(pads.scl)
-
-        status = Signal()
-        self.comb += self.gpio_in.status[0].eq(status)
-
-        self.specials += MultiReg(ts_scl.i, status)
-        self.comb += [
-            If(self.gpio_enable.storage,
-                ts_scl.o.eq(self.gpio_out.storage[0]),
-                ts_scl.oe.eq(self.gpio_oe.storage[0])
-            ).Else(
-                ts_scl.o.eq(0),
-                ts_scl.oe.eq(~programmer.scl)
-            )
-        ]
-
-        # SDA GPIO and mux
-        ts_sda = TSTriple(1)
-        self.specials += ts_sda.get_tristate(pads.sda)
-
-        status = Signal()
-        self.comb += self.gpio_in.status[1].eq(status)
-
-        self.specials += MultiReg(ts_sda.i, status)
-        self.comb += [
-            If(self.gpio_enable.storage,
-                ts_sda.o.eq(self.gpio_out.storage[1]),
-                ts_sda.oe.eq(self.gpio_oe.storage[1])
-            ).Else(
-                ts_sda.o.eq(0),
-                ts_sda.oe.eq(~programmer.sda_o)
-            )
-        ]
-        self.specials += MultiReg(ts_sda.i, programmer.sda_i, "helper")
-
-        # Error reporting
-        collision_cdc = BlindTransfer("helper", "sys")
-        self.submodules += collision_cdc
-        self.comb += collision_cdc.i.eq(programmer.stb & programmer.busy)
-
-        nack_cdc = PulseSynchronizer("helper", "sys")
-        self.submodules += nack_cdc
-        self.comb += nack_cdc.i.eq(programmer.nack)
-
-        for n, trig in enumerate([collision_cdc.o, nack_cdc.o]):
-            self.sync += [
-                If(self.errors.re & self.errors.r[n], self.errors.w[n].eq(0)),
-                If(trig, self.errors.w[n].eq(1))
-            ]
-
-
-if __name__ == "__main__":
-    simulate_programmer()

artiq/gateware/drtio/wrpll/thls.py

@@ -1,618 +0,0 @@
-import inspect
-import ast
-from copy import copy
-import operator
-from functools import reduce
-from collections import OrderedDict
-
-from migen import *
-from migen.genlib.fsm import *
-
-
-class Isn:
-    def __init__(self, immediate=None, inputs=None, outputs=None):
-        if inputs is None:
-            inputs = []
-        if outputs is None:
-            outputs = []
-        self.immediate = immediate
-        self.inputs = inputs
-        self.outputs = outputs
-
-    def __repr__(self):
-        r = "<"
-        r += self.__class__.__name__
-        if self.immediate is not None:
-            r += " (" + str(self.immediate) + ")"
-        for inp in self.inputs:
-            r += " r" + str(inp)
-        if self.outputs:
-            r += " ->"
-            for outp in self.outputs:
-                r += " r" + str(outp)
-        r += ">"
-        return r
-
-
-class NopIsn(Isn):
-    opcode = 0
-
-class AddIsn(Isn):
-    opcode = 1
-
-class SubIsn(Isn):
-    opcode = 2
-
-class MulShiftIsn(Isn):
-    opcode = 3
-
-# opcode = 4: MulShift with alternate shift
-
-class MinIsn(Isn):
-    opcode = 5
-
-class MaxIsn(Isn):
-    opcode = 6
-
-class CopyIsn(Isn):
-    opcode = 7
-
-class InputIsn(Isn):
-    opcode = 8
-
-class OutputIsn(Isn):
-    opcode = 9
-
-class EndIsn(Isn):
-    opcode = 10
-
-
-class ASTCompiler:
-    def __init__(self):
-        self.program = []
-        self.data = []
-        self.next_ssa_reg = -1
-        self.constants = dict()
-        self.names = dict()
-        self.globals = OrderedDict()
-
-    def get_ssa_reg(self):
-        r = self.next_ssa_reg
-        self.next_ssa_reg -= 1
-        return r
-
-    def add_global(self, name):
-        if name not in self.globals:
-            r = len(self.data)
-            self.data.append(0)
-            self.names[name] = r
-            self.globals[name] = r
-
-    def input(self, name):
-        target = self.get_ssa_reg()
-        self.program.append(InputIsn(outputs=[target]))
-        self.names[name] = target
-
-    def emit(self, node):
-        if isinstance(node, ast.BinOp):
-            if isinstance(node.op, ast.RShift):
-                if not isinstance(node.left, ast.BinOp) or not isinstance(node.left.op, ast.Mult):
-                    raise NotImplementedError
-                if not isinstance(node.right, ast.Num):
-                    raise NotImplementedError
-                left = self.emit(node.left.left)
-                right = self.emit(node.left.right)
-                cons = lambda **kwargs: MulShiftIsn(immediate=node.right.n, **kwargs)
-            else:
-                left = self.emit(node.left)
-                right = self.emit(node.right)
-                if isinstance(node.op, ast.Add):
-                    cons = AddIsn
-                elif isinstance(node.op, ast.Sub):
-                    cons = SubIsn
-                elif isinstance(node.op, ast.Mult):
-                    cons = lambda **kwargs: MulShiftIsn(immediate=0, **kwargs)
-                else:
-                    raise NotImplementedError
-            output = self.get_ssa_reg()
-            self.program.append(cons(inputs=[left, right], outputs=[output]))
-            return output
-        elif isinstance(node, ast.Call):
-            if not isinstance(node.func, ast.Name):
-                raise NotImplementedError
-            funcname = node.func.id
-            if node.keywords:
-                raise NotImplementedError
-            inputs = [self.emit(x) for x in node.args]
-            if funcname == "min":
-                cons = MinIsn
-            elif funcname == "max":
-                cons = MaxIsn
-            else:
-                raise NotImplementedError
-            output = self.get_ssa_reg()
-            self.program.append(cons(inputs=inputs, outputs=[output]))
-            return output
-        elif isinstance(node, (ast.Num, ast.UnaryOp)):
-            if isinstance(node, ast.UnaryOp):
-                if not isinstance(node.operand, ast.Num):
-                    raise NotImplementedError
-                if isinstance(node.op, ast.UAdd):
-                    transform = lambda x: x
-                elif isinstance(node.op, ast.USub):
-                    transform = operator.neg
-                elif isinstance(node.op, ast.Invert):
-                    transform = operator.invert
-                else:
-                    raise NotImplementedError
-                node = node.operand
-            else:
-                transform = lambda x: x
-            n = transform(node.n)
-            if n in self.constants:
-                return self.constants[n]
-            else:
-                r = len(self.data)
-                self.data.append(n)
-                self.constants[n] = r
-                return r
-        elif isinstance(node, ast.Name):
-            return self.names[node.id]
-        elif isinstance(node, ast.Assign):
-            output = self.emit(node.value)
-            for target in node.targets:
-                assert isinstance(target, ast.Name)
-                self.names[target.id] = output
-        elif isinstance(node, ast.Return):
-            value = self.emit(node.value)
-            self.program.append(OutputIsn(inputs=[value]))
-        elif isinstance(node, ast.Global):
-            pass
-        else:
-            raise NotImplementedError
-
-
-class Processor:
-    def __init__(self, data_width=32, multiplier_stages=2):
-        self.data_width = data_width
-        self.multiplier_stages = multiplier_stages
-        self.multiplier_shifts = []
-        self.program_rom_size = None
-        self.data_ram_size = None
-        self.opcode_bits = 4
-        self.reg_bits = None
-
-    def get_instruction_latency(self, isn):
-        return {
-            AddIsn: 2,
-            SubIsn: 2,
-            MulShiftIsn: 1 + self.multiplier_stages,
-            MinIsn: 2,
-            MaxIsn: 2,
-            CopyIsn: 1,
-            InputIsn: 1
-        }[isn.__class__]
-
-    def encode_instruction(self, isn, exit):
-        opcode = isn.opcode
-        if isn.immediate is not None and not isinstance(isn, MulShiftIsn):
-            r0 = isn.immediate
-            if len(isn.inputs) >= 1:
-                r1 = isn.inputs[0]
-            else:
-                r1 = 0
-        else:
-            if len(isn.inputs) >= 1:
-                r0 = isn.inputs[0]
-            else:
-                r0 = 0
-            if len(isn.inputs) >= 2:
-                r1 = isn.inputs[1]
-            else:
-                r1 = 0
-        r = 0
-        for value, bits in ((exit, self.reg_bits), (r1, self.reg_bits), (r0, self.reg_bits), (opcode, self.opcode_bits)):
-            r <<= bits
-            r |= value
-        return r
-
-    def instruction_bits(self):
-        return 3*self.reg_bits + self.opcode_bits
-
-    def implement(self, program, data):
-        return ProcessorImpl(self, program, data)
-
-
-class Scheduler:
-    def __init__(self, processor, reserved_data, program):
-        self.processor = processor
-        self.reserved_data = reserved_data
-        self.used_registers = set(range(self.reserved_data))
-        self.exits = dict()
-        self.program = program
-        self.remaining = copy(program)
-        self.output = []
-
-    def allocate_register(self):
-        r = min(set(range(max(self.used_registers) + 2)) - self.used_registers)
-        self.used_registers.add(r)
-        return r
-
-    def free_register(self, r):
-        assert r >= self.reserved_data
-        self.used_registers.discard(r)
-
-    def find_inputs(self, cycle, isn):
-        mapped_inputs = []
-        for inp in isn.inputs:
-            if inp >= 0:
-                mapped_inputs.append(inp)
-            else:
-                found = False
-                for i in range(cycle):
-                    if i in self.exits:
-                        r, rm = self.exits[i]
-                        if r == inp:
-                            mapped_inputs.append(rm)
-                            found = True
-                            break
-                if not found:
-                    return None
-        return mapped_inputs
-
-    def schedule_one(self, isn):
-        cycle = len(self.output)
-        mapped_inputs = self.find_inputs(cycle, isn)
-        if mapped_inputs is None:
-            return False
-
-        if isn.outputs:
-            # check that exit slot is free
-            latency = self.processor.get_instruction_latency(isn)
-            exit = cycle + latency
-            if exit in self.exits:
-                return False
-
-            # avoid RAW hazard with global writeback
-            for output in isn.outputs:
-                if output >= 0:
-                    for risn in self.remaining:
-                        for inp in risn.inputs:
-                            if inp == output:
-                                return False
-
-        # Instruction can be scheduled
-
-        self.remaining.remove(isn)
-
-        for inp, minp in zip(isn.inputs, mapped_inputs):
-            can_free = inp < 0 and all(inp != rinp for risn in self.remaining for rinp in risn.inputs)
-            if can_free:
-                self.free_register(minp)
-
-        if isn.outputs:
-            assert len(isn.outputs) == 1
-            if isn.outputs[0] < 0:
-                output = self.allocate_register()
-            else:
-                output = isn.outputs[0]
-            self.exits[exit] = (isn.outputs[0], output)
-        self.output.append(isn.__class__(immediate=isn.immediate, inputs=mapped_inputs))
-
-        return True
-
-    def schedule(self):
-        while self.remaining:
-            success = False
-            for isn in self.remaining:
-                if self.schedule_one(isn):
-                    success = True
-                    break
-            if not success:
-                self.output.append(NopIsn())
-        self.output += [NopIsn()]*(max(self.exits.keys()) - len(self.output) + 1)
-        return self.output
-
-
-class CompiledProgram:
-    def __init__(self, processor, program, exits, data, glbs):
-        self.processor = processor
-        self.program = program
-        self.exits = exits
-        self.data = data
-        self.globals = glbs
-
-    def pretty_print(self):
-        for cycle, isn in enumerate(self.program):
-            l = "{:4d} {:15}".format(cycle, str(isn))
-            if cycle in self.exits:
-                l += " -> r{}".format(self.exits[cycle])
-            print(l)
-
-    def dimension_processor(self):
-        self.processor.program_rom_size = len(self.program)
-        self.processor.data_ram_size = len(self.data)
-        self.processor.reg_bits = (self.processor.data_ram_size - 1).bit_length()
-        for isn in self.program:
-            if isinstance(isn, MulShiftIsn) and isn.immediate not in self.processor.multiplier_shifts:
-                self.processor.multiplier_shifts.append(isn.immediate)
-
-    def encode(self):
-        r = []
-        for i, isn in enumerate(self.program):
-            exit = self.exits.get(i, 0)
-            r.append(self.processor.encode_instruction(isn, exit))
-        return r
-
-
-def compile(processor, function):
-    node = ast.parse(inspect.getsource(function))
-    assert isinstance(node, ast.Module)
-    assert len(node.body) == 1
-    node = node.body[0]
-    assert isinstance(node, ast.FunctionDef)
-    assert len(node.args.args) == 1
-    arg = node.args.args[0].arg
-    body = node.body
-
-    astcompiler = ASTCompiler()
-    for node in body:
-        if isinstance(node, ast.Global):
-            for name in node.names:
-                astcompiler.add_global(name)
-    arg_r = astcompiler.input(arg)
-    for node in body:
-        astcompiler.emit(node)
-        if isinstance(node, ast.Return):
-            break
-    for glbl, location in astcompiler.globals.items():
-        new_location = astcompiler.names[glbl]
-        if new_location != location:
-            astcompiler.program.append(CopyIsn(inputs=[new_location], outputs=[location]))
-
-    scheduler = Scheduler(processor, len(astcompiler.data), astcompiler.program)
-    scheduler.schedule()
-
-    program = copy(scheduler.output)
-    program.append(EndIsn())
-
-    max_reg = max(max(max(isn.inputs + [0]) for isn in program), max(v[1] for k, v in scheduler.exits.items()))
-
-    return CompiledProgram(
-        processor=processor,
-        program=program,
-        exits={k: v[1] for k, v in scheduler.exits.items()},
-        data=astcompiler.data + [0]*(max_reg - len(astcompiler.data) + 1),
-        glbs=astcompiler.globals)
-
-
-class BaseUnit(Module):
-    def __init__(self, data_width):
-        self.stb_i = Signal()
-        self.i0 = Signal((data_width, True))
-        self.i1 = Signal((data_width, True))
-        self.stb_o = Signal()
-        self.o = Signal((data_width, True))
-
-
-class NopUnit(BaseUnit):
-    pass
-
-
-class OpUnit(BaseUnit):
-    def __init__(self, op, data_width, stages, op_data_width=None):
-        BaseUnit.__init__(self, data_width)
-        # work around Migen's mishandling of Verilog's cretinous operator width rules
-        if op_data_width is None:
-            op_data_width = data_width
-
-        if stages > 1:
-            # Vivado backward retiming for DSP does not work correctly if DSP inputs
-            # are not registered.
-            i0 = Signal.like(self.i0)
-            i1 = Signal.like(self.i1)
-            stb_i = Signal()
-            self.sync += [
-                i0.eq(self.i0),
-                i1.eq(self.i1),
-                stb_i.eq(self.stb_i)
-            ]
-            output_stages = stages - 1
-        else:
-            i0, i1, stb_i = self.i0, self.i1, self.stb_i
-            output_stages = stages
-
-        o = Signal((op_data_width, True))
-        self.comb += o.eq(op(i0, i1))
-        stb_o = stb_i
-        for i in range(output_stages):
-            n_o = Signal((data_width, True))
-            if stages > 1:
-                n_o.attr.add(("retiming_backward", 1))
-            n_stb_o = Signal()
-            self.sync += [
-                n_o.eq(o),
-                n_stb_o.eq(stb_o)
-            ]
-            o = n_o
-            stb_o = n_stb_o
-        self.comb += [
-            self.o.eq(o),
-            self.stb_o.eq(stb_o)
-        ]
-
-
-class SelectUnit(BaseUnit):
-    def __init__(self, op, data_width):
-        BaseUnit.__init__(self, data_width)
-
-        self.sync += [
-            self.stb_o.eq(self.stb_i),
-            If(op(self.i0, self.i1),
-                self.o.eq(self.i0)
-            ).Else(
-                self.o.eq(self.i1)
-            )
-        ]
-
-
-class CopyUnit(BaseUnit):
-    def __init__(self, data_width):
-        BaseUnit.__init__(self, data_width)
-
-        self.comb += [
-            self.stb_o.eq(self.stb_i),
-            self.o.eq(self.i0)
-        ]
-
-
-class InputUnit(BaseUnit):
-    def __init__(self, data_width, input_stb, input):
-        BaseUnit.__init__(self, data_width)
-        self.buffer = Signal(data_width)
-
-        self.comb += [
-            self.stb_o.eq(self.stb_i),
-            self.o.eq(self.buffer)
-        ]
-
-
-class OutputUnit(BaseUnit):
-    def __init__(self, data_width, output_stb, output):
-        BaseUnit.__init__(self, data_width)
-
-        self.sync += [
-            output_stb.eq(self.stb_i),
-            output.eq(self.i0)
-        ]
-
-
-class ProcessorImpl(Module):
-    def __init__(self, pd, program, data):
-        self.input_stb = Signal()
-        self.input = Signal((pd.data_width, True))
-
-        self.output_stb = Signal()
-        self.output = Signal((pd.data_width, True))
-
-        self.busy = Signal()
-
-        # # #
-
-        program_mem = Memory(pd.instruction_bits(), pd.program_rom_size, init=program)
-        data_mem0 = Memory(pd.data_width, pd.data_ram_size, init=data)
-        data_mem1 = Memory(pd.data_width, pd.data_ram_size, init=data)
-        self.specials += program_mem, data_mem0, data_mem1
-
-        pc = Signal(pd.instruction_bits())
-        pc_next = Signal.like(pc)
-        pc_en = Signal()
-        self.sync += pc.eq(pc_next)
-        self.comb += [
-            If(pc_en,
-                pc_next.eq(pc + 1)
-            ).Else(
-                pc_next.eq(0)
-            )
-        ]
-        program_mem_port = program_mem.get_port()
-        self.specials += program_mem_port
-        self.comb += program_mem_port.adr.eq(pc_next)
-
-        s = 0
-        opcode = Signal(pd.opcode_bits)
-        self.comb += opcode.eq(program_mem_port.dat_r[s:s+pd.opcode_bits])
-        s += pd.opcode_bits
-        r0 = Signal(pd.reg_bits)
-        self.comb += r0.eq(program_mem_port.dat_r[s:s+pd.reg_bits])
-        s += pd.reg_bits
-        r1 = Signal(pd.reg_bits)
-        self.comb += r1.eq(program_mem_port.dat_r[s:s+pd.reg_bits])
-        s += pd.reg_bits
-        exit = Signal(pd.reg_bits)
-        self.comb += exit.eq(program_mem_port.dat_r[s:s+pd.reg_bits])
-
-        data_read_port0 = data_mem0.get_port()
-        data_read_port1 = data_mem1.get_port()
-        self.specials += data_read_port0, data_read_port1
-        self.comb += [
-            data_read_port0.adr.eq(r0),
-            data_read_port1.adr.eq(r1)
-        ]
-
-        data_write_port = data_mem0.get_port(write_capable=True)
-        data_write_port_dup = data_mem1.get_port(write_capable=True)
-        self.specials += data_write_port, data_write_port_dup
-        self.comb += [
-            data_write_port_dup.we.eq(data_write_port.we),
-            data_write_port_dup.adr.eq(data_write_port.adr),
-            data_write_port_dup.dat_w.eq(data_write_port.dat_w),
-            data_write_port.adr.eq(exit)
-        ]
-
-        nop = NopUnit(pd.data_width)
-        adder = OpUnit(operator.add, pd.data_width, 1)
-        subtractor = OpUnit(operator.sub, pd.data_width, 1)
-        if pd.multiplier_shifts:
-            if len(pd.multiplier_shifts) != 1:
-                raise NotImplementedError
-            multiplier = OpUnit(lambda a, b: a * b >> pd.multiplier_shifts[0],
-                pd.data_width, pd.multiplier_stages, op_data_width=2*pd.data_width)
-        else:
-            multiplier = NopUnit(pd.data_width)
-        minu = SelectUnit(operator.lt, pd.data_width)
-        maxu = SelectUnit(operator.gt, pd.data_width)
-        copier = CopyUnit(pd.data_width)
-        inu = InputUnit(pd.data_width, self.input_stb, self.input)
-        outu = OutputUnit(pd.data_width, self.output_stb, self.output)
-        units = [nop, adder, subtractor, multiplier, minu, maxu, copier, inu, outu]
-        self.submodules += units
-
-        for unit in units:
-            self.sync += unit.stb_i.eq(0)
-            self.comb += [
-                unit.i0.eq(data_read_port0.dat_r),
-                unit.i1.eq(data_read_port1.dat_r),
-                If(unit.stb_o,
-                    data_write_port.we.eq(1),
-                    data_write_port.dat_w.eq(unit.o)
-                )
-            ]
-
-        decode_table = [
-            (NopIsn.opcode,            nop),
-            (AddIsn.opcode,            adder),
-            (SubIsn.opcode,            subtractor),
-            (MulShiftIsn.opcode,       multiplier),
-            (MulShiftIsn.opcode + 1,   multiplier),
-            (MinIsn.opcode,            minu),
-            (MaxIsn.opcode,            maxu),
-            (CopyIsn.opcode,           copier),
-            (InputIsn.opcode,          inu),
-            (OutputIsn.opcode,         outu)
-        ]
-        for allocated_opcode, unit in decode_table:
-            self.sync += If(pc_en & (opcode == allocated_opcode), unit.stb_i.eq(1))
-
-        fsm = FSM()
-        self.submodules += fsm
-        fsm.act("IDLE",
-            pc_en.eq(0),
-            NextValue(inu.buffer, self.input),
-            If(self.input_stb, NextState("PROCESSING"))
-        )
-        fsm.act("PROCESSING",
-            self.busy.eq(1),
-            pc_en.eq(1),
-            If(opcode == EndIsn.opcode,
-                pc_en.eq(0),
-                NextState("IDLE")
-            )
-        )
-
-
-def make(function, **kwargs):
-    proc = Processor(**kwargs)
-    cp = compile(proc, function)
-    cp.dimension_processor()
-    return proc.implement(cp.encode(), cp.data)

artiq/gateware/eem.py

@@ -259,25 +259,25 @@ class Sampler(_EEM):
         ios = [
             ("sampler{}_adc_spi_p".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 0, "p"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 1, "p"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 1, "p")), Misc("DIFF_TERM=TRUE")),
                 iostandard(eem),
             ),
             ("sampler{}_adc_spi_n".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 0, "n"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 1, "n"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 1, "n")), Misc("DIFF_TERM=TRUE")),
                 iostandard(eem),
             ),
             ("sampler{}_pgia_spi_p".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 4, "p"))),
                 Subsignal("mosi", Pins(_eem_pin(eem, 5, "p"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 6, "p"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 6, "p")), Misc("DIFF_TERM=TRUE")),
                 Subsignal("cs_n", Pins(_eem_pin(eem, 7, "p"))),
                 iostandard(eem),
             ),
             ("sampler{}_pgia_spi_n".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 4, "n"))),
                 Subsignal("mosi", Pins(_eem_pin(eem, 5, "n"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 6, "n"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 6, "n")), Misc("DIFF_TERM=TRUE")),
                 Subsignal("cs_n", Pins(_eem_pin(eem, 7, "n"))),
                 iostandard(eem),
             ),
@@ -633,14 +633,14 @@ class Mirny(_EEM):
             ("mirny{}_spi_p".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 0, "p"))),
                 Subsignal("mosi", Pins(_eem_pin(eem, 1, "p"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 2, "p"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 2, "p")), Misc("DIFF_TERM=TRUE")),
                 Subsignal("cs_n", Pins(_eem_pin(eem, 3, "p"))),
                 iostandard(eem),
             ),
             ("mirny{}_spi_n".format(eem), 0,
                 Subsignal("clk", Pins(_eem_pin(eem, 0, "n"))),
                 Subsignal("mosi", Pins(_eem_pin(eem, 1, "n"))),
-                Subsignal("miso", Pins(_eem_pin(eem, 2, "n"))),
+                Subsignal("miso", Pins(_eem_pin(eem, 2, "n")), Misc("DIFF_TERM=TRUE")),
                 Subsignal("cs_n", Pins(_eem_pin(eem, 3, "n"))),
                 iostandard(eem),
             ),

artiq/gateware/rtio/dma.py

@@ -122,7 +122,7 @@ class RawSlicer(Module):
                  for i in range(out_size)})),
             If(shift_buf, Case(self.source_consume,
                 {i: buf.eq(buf[i*g:])
-                 for i in range(out_size)})),
+                 for i in range(out_size + 1)})),
         ]
 
         fsm = FSM(reset_state="FETCH")

artiq/gateware/targets/kasli.py

@@ -21,7 +21,6 @@ from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier, fix_serdes_
 from artiq.gateware import eem
 from artiq.gateware.drtio.transceiver import gtp_7series
 from artiq.gateware.drtio.siphaser import SiPhaser7Series
-from artiq.gateware.drtio.wrpll import WRPLL, DDMTDSamplerGTP
 from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
 from artiq.gateware.drtio import *
 from artiq.build_soc import *
@@ -282,6 +281,9 @@ class MasterBase(MiniSoC, AMPSoC):
         platform = self.platform
 
         if platform.hw_rev == "v2.0":
+            self.submodules.error_led = gpio.GPIOOut(Cat(
+                self.platform.request("error_led")))
+            self.csr_devices.append("error_led")
             self.submodules += SMAClkinForward(platform)
 
         i2c = self.platform.request("i2c")
@@ -416,7 +418,10 @@ class MasterBase(MiniSoC, AMPSoC):
         self.specials += Instance("IBUFDS_GTE2",
             i_CEB=self.disable_cdr_clk_ibuf,
             i_I=cdr_clk_clean.p, i_IB=cdr_clk_clean.n,
-            o_O=cdr_clk_clean_buf)
+            o_O=cdr_clk_clean_buf,
+            p_CLKCM_CFG="TRUE",
+            p_CLKRCV_TRST="TRUE",
+            p_CLKSWING_CFG=3)
         # Note precisely the rules Xilinx made up:
         # refclksel=0b001 GTREFCLK0 selected
         # refclksel=0b010 GTREFCLK1 selected
@@ -443,7 +448,7 @@ class SatelliteBase(BaseSoC):
     }
     mem_map.update(BaseSoC.mem_map)
 
-    def __init__(self, rtio_clk_freq=125e6, enable_sata=False, *, with_wrpll=False, gateware_identifier_str=None, hw_rev="v2.0", **kwargs):
+    def __init__(self, rtio_clk_freq=125e6, enable_sata=False, *, gateware_identifier_str=None, hw_rev="v2.0", **kwargs):
         if hw_rev in ("v1.0", "v1.1"):
             cpu_bus_width = 32
         else:
@@ -459,6 +464,11 @@ class SatelliteBase(BaseSoC):
 
         platform = self.platform
 
+        if self.platform.hw_rev == "v2.0":
+            self.submodules.error_led = gpio.GPIOOut(Cat(
+                self.platform.request("error_led")))
+            self.csr_devices.append("error_led")
+
         disable_cdr_clk_ibuf = Signal(reset=1)
         disable_cdr_clk_ibuf.attr.add("no_retiming")
         if self.platform.hw_rev == "v2.0":
@@ -469,7 +479,10 @@ class SatelliteBase(BaseSoC):
         self.specials += Instance("IBUFDS_GTE2",
             i_CEB=disable_cdr_clk_ibuf,
             i_I=cdr_clk_clean.p, i_IB=cdr_clk_clean.n,
-            o_O=cdr_clk_clean_buf)
+            o_O=cdr_clk_clean_buf,
+            p_CLKCM_CFG="TRUE",
+            p_CLKRCV_TRST="TRUE",
+            p_CLKSWING_CFG=3)
         qpll_drtio_settings = QPLLSettings(
             refclksel=0b001,
             fbdiv=4,
@@ -560,35 +573,18 @@ class SatelliteBase(BaseSoC):
 
         rtio_clk_period = 1e9/rtio_clk_freq
         self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
-        if with_wrpll:
+
-            self.submodules.wrpll_sampler = DDMTDSamplerGTP(
+        self.submodules.siphaser = SiPhaser7Series(
-                self.drtio_transceiver,
+            si5324_clkin=platform.request("cdr_clk") if platform.hw_rev == "v2.0"
-                platform.request("cdr_clk_clean_fabric"))
+                else platform.request("si5324_clkin"),
-            helper_clk_pads = platform.request("ddmtd_helper_clk")
+            rx_synchronizer=self.rx_synchronizer,
-            self.submodules.wrpll = WRPLL(
+            ref_clk=self.crg.clk125_div2, ref_div2=True,
-                helper_clk_pads=helper_clk_pads,
+            rtio_clk_freq=rtio_clk_freq)
-                main_dcxo_i2c=platform.request("ddmtd_main_dcxo_i2c"),
+        platform.add_false_path_constraints(
-                helper_dxco_i2c=platform.request("ddmtd_helper_dcxo_i2c"),
+            self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-                ddmtd_inputs=self.wrpll_sampler)
+        self.csr_devices.append("siphaser")
-            self.csr_devices.append("wrpll")
+        self.config["HAS_SI5324"] = None
-            # note: do not use self.wrpll.cd_helper.clk; otherwise, vivado craps out with:
+        self.config["SI5324_SOFT_RESET"] = None
-            # critical warning: create_clock attempting to set clock on an unknown port/pin
-            # command: "create_clock -period 7.920000 -waveform {0.000000 3.960000} -name
-            # helper_clk [get_xlnx_outside_genome_inst_pin 20 0]
-            platform.add_period_constraint(helper_clk_pads.p, rtio_clk_period*0.99)
-            platform.add_false_path_constraints(self.crg.cd_sys.clk, helper_clk_pads.p)
-        else:
-            self.submodules.siphaser = SiPhaser7Series(
-                si5324_clkin=platform.request("cdr_clk") if platform.hw_rev == "v2.0"
-                    else platform.request("si5324_clkin"),
-                rx_synchronizer=self.rx_synchronizer,
-                ref_clk=self.crg.clk125_div2, ref_div2=True,
-                rtio_clk_freq=rtio_clk_freq)
-            platform.add_false_path_constraints(
-                self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-            self.csr_devices.append("siphaser")
-            self.config["HAS_SI5324"] = None
-            self.config["SI5324_SOFT_RESET"] = None
 
         gtp = self.drtio_transceiver.gtps[0]
         platform.add_period_constraint(gtp.txoutclk, rtio_clk_period)
@@ -596,9 +592,6 @@ class SatelliteBase(BaseSoC):
         platform.add_false_path_constraints(
             self.crg.cd_sys.clk,
             gtp.txoutclk, gtp.rxoutclk)
-        if with_wrpll:
-            platform.add_false_path_constraints(
-                helper_clk_pads.p, gtp.rxoutclk)
         for gtp in self.drtio_transceiver.gtps[1:]:
             platform.add_period_constraint(gtp.rxoutclk, rtio_clk_period)
             platform.add_false_path_constraints(
@@ -677,14 +670,11 @@ def main():
     parser.add_argument("-V", "--variant", default="tester",
                         help="variant: {} (default: %(default)s)".format(
                             "/".join(sorted(VARIANTS.keys()))))
-    parser.add_argument("--with-wrpll", default=False, action="store_true")
     parser.add_argument("--gateware-identifier-str", default=None,
                         help="Override ROM identifier")
     args = parser.parse_args()
 
     argdict = dict()
-    if args.with_wrpll:
-        argdict["with_wrpll"] = True
     argdict["gateware_identifier_str"] = args.gateware_identifier_str
 
     variant = args.variant.lower()

artiq/gateware/targets/sayma_amc.py

@@ -21,7 +21,6 @@ from artiq.gateware import fmcdio_vhdci_eem
 from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_ultrascale, sawg
 from artiq.gateware.drtio.transceiver import gth_ultrascale
 from artiq.gateware.drtio.siphaser import SiPhaser7Series
-from artiq.gateware.drtio.wrpll import WRPLL, DDMTDSamplerExtFF
 from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
 from artiq.gateware.drtio import *
 from artiq.build_soc import *
@@ -54,7 +53,7 @@ class SatelliteBase(MiniSoC):
     }
     mem_map.update(MiniSoC.mem_map)
 
-    def __init__(self, rtio_clk_freq=125e6, identifier_suffix="", gateware_identifier_str=None, with_sfp=False, *, with_wrpll, **kwargs):
+    def __init__(self, rtio_clk_freq=125e6, identifier_suffix="", gateware_identifier_str=None, with_sfp=False, *, **kwargs):
         MiniSoC.__init__(self,
                  cpu_type="vexriscv",
                  cpu_bus_width=64,
@@ -69,10 +68,6 @@ class SatelliteBase(MiniSoC):
 
         platform = self.platform
 
-        if with_wrpll:
-            clock_recout_pads = platform.request("ddmtd_rec_clk")
-        else:
-            clock_recout_pads = None
         if with_sfp:
             # Use SFP0 to connect to master (Kasli)
             self.comb += platform.request("sfp_tx_disable", 0).eq(0)
@@ -84,7 +79,7 @@ class SatelliteBase(MiniSoC):
             data_pads=[drtio_uplink, platform.request("rtm_amc_link")],
             sys_clk_freq=self.clk_freq,
             rtio_clk_freq=rtio_clk_freq,
-            clock_recout_pads=clock_recout_pads)
+            clock_recout_pads=None)
         self.csr_devices.append("drtio_transceiver")
 
         self.submodules.rtio_tsc = rtio.TSC("sync", glbl_fine_ts_width=3)
@@ -134,39 +129,22 @@ class SatelliteBase(MiniSoC):
 
         rtio_clk_period = 1e9/rtio_clk_freq
         self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
-        if with_wrpll:
+        self.comb += platform.request("filtered_clk_sel").eq(1)
-            self.comb += [
+        self.submodules.siphaser = SiPhaser7Series(
-                platform.request("filtered_clk_sel").eq(0),
+            si5324_clkin=platform.request("si5324_clkin"),
-                platform.request("ddmtd_main_dcxo_oe").eq(1),
+            rx_synchronizer=self.rx_synchronizer,
-                platform.request("ddmtd_helper_dcxo_oe").eq(1)
+            ultrascale=True,
-            ]
+            rtio_clk_freq=rtio_clk_freq)
-            self.submodules.wrpll_sampler = DDMTDSamplerExtFF(
+        platform.add_false_path_constraints(
-                platform.request("ddmtd_inputs"))
+            self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-            self.submodules.wrpll = WRPLL(
+        self.csr_devices.append("siphaser")
-                helper_clk_pads=platform.request("ddmtd_helper_clk"),
+        self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
-                main_dcxo_i2c=platform.request("ddmtd_main_dcxo_i2c"),
+        self.csr_devices.append("si5324_rst_n")
-                helper_dxco_i2c=platform.request("ddmtd_helper_dcxo_i2c"),
+        i2c = self.platform.request("i2c")
-                ddmtd_inputs=self.wrpll_sampler)
+        self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
-            self.csr_devices.append("wrpll")
+        self.csr_devices.append("i2c")
-            platform.add_period_constraint(self.wrpll.cd_helper.clk, rtio_clk_period*0.99)
+        self.config["I2C_BUS_COUNT"] = 1
-            platform.add_false_path_constraints(self.crg.cd_sys.clk, self.wrpll.cd_helper.clk)
+        self.config["HAS_SI5324"] = None
-        else:
-            self.comb += platform.request("filtered_clk_sel").eq(1)
-            self.submodules.siphaser = SiPhaser7Series(
-                si5324_clkin=platform.request("si5324_clkin"),
-                rx_synchronizer=self.rx_synchronizer,
-                ultrascale=True,
-                rtio_clk_freq=rtio_clk_freq)
-            platform.add_false_path_constraints(
-                self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-            self.csr_devices.append("siphaser")
-            self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
-            self.csr_devices.append("si5324_rst_n")
-            i2c = self.platform.request("i2c")
-            self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
-            self.csr_devices.append("i2c")
-            self.config["I2C_BUS_COUNT"] = 1
-            self.config["HAS_SI5324"] = None
 
         gth = self.drtio_transceiver.gths[0]
         platform.add_period_constraint(gth.txoutclk, rtio_clk_period/2)
@@ -433,7 +411,6 @@ def main():
         default="sawg",
         help="Change type of signal generator. This is used exclusively for "
              "development and debugging.")
-    parser.add_argument("--with-wrpll", default=False, action="store_true")
     parser.add_argument("--gateware-identifier-str", default=None,
                         help="Override ROM identifier")
     args = parser.parse_args()
@@ -443,13 +420,11 @@ def main():
         soc = Satellite(
             with_sfp=args.sfp,
             jdcg_type=args.jdcg_type,
-            with_wrpll=args.with_wrpll,
             gateware_identifier_str=args.gateware_identifier_str,
             **soc_sayma_amc_argdict(args))
     elif variant == "simplesatellite":
         soc = SimpleSatellite(
             with_sfp=args.sfp,
-            with_wrpll=args.with_wrpll,
             gateware_identifier_str=args.gateware_identifier_str,
             **soc_sayma_amc_argdict(args))
     else:

artiq/gateware/targets/sayma_rtm.py

@@ -21,7 +21,6 @@ from artiq.gateware.rtio.phy import ttl_simple, ttl_serdes_7series
 from artiq.gateware.rtio.xilinx_clocking import RTIOClockMultiplier, fix_serdes_timing_path
 from artiq.gateware.drtio.transceiver import gtp_7series
 from artiq.gateware.drtio.siphaser import SiPhaser7Series
-from artiq.gateware.drtio.wrpll import WRPLL, DDMTDSamplerGTP
 from artiq.gateware.drtio.rx_synchronizer import XilinxRXSynchronizer
 from artiq.gateware.drtio import *
 from artiq.build_soc import add_identifier
@@ -34,7 +33,7 @@ class _SatelliteBase(BaseSoC):
     }
     mem_map.update(BaseSoC.mem_map)
 
-    def __init__(self, rtio_clk_freq, *, with_wrpll, gateware_identifier_str, **kwargs):
+    def __init__(self, rtio_clk_freq, *, gateware_identifier_str, **kwargs):
         BaseSoC.__init__(self,
                  cpu_type="vexriscv",
                  cpu_bus_width=64,
@@ -51,7 +50,10 @@ class _SatelliteBase(BaseSoC):
         self.specials += Instance("IBUFDS_GTE2",
             i_CEB=disable_cdrclkc_ibuf,
             i_I=cdrclkc_clkout.p, i_IB=cdrclkc_clkout.n,
-            o_O=cdrclkc_clkout_buf)
+            o_O=cdrclkc_clkout_buf,
+            p_CLKCM_CFG="TRUE",
+            p_CLKRCV_TRST="TRUE",
+            p_CLKSWING_CFG=3)
         qpll_drtio_settings = QPLLSettings(
             refclksel=0b001,
             fbdiv=4,
@@ -96,41 +98,23 @@ class _SatelliteBase(BaseSoC):
         gtp = self.drtio_transceiver.gtps[0]
         rtio_clk_period = 1e9/rtio_clk_freq
         self.config["RTIO_FREQUENCY"] = str(rtio_clk_freq/1e6)
-        if with_wrpll:
+
-            self.comb += [
+        self.comb += platform.request("filtered_clk_sel").eq(1)
-                platform.request("filtered_clk_sel").eq(0),
+        self.submodules.siphaser = SiPhaser7Series(
-                platform.request("ddmtd_main_dcxo_oe").eq(1),
+            si5324_clkin=platform.request("si5324_clkin"),
-                platform.request("ddmtd_helper_dcxo_oe").eq(1)
+            rx_synchronizer=self.rx_synchronizer,
-            ]
+            ref_clk=self.crg.cd_sys.clk, ref_div2=True,
-            self.submodules.wrpll_sampler = DDMTDSamplerGTP(
+            rtio_clk_freq=rtio_clk_freq)
-                self.drtio_transceiver,
+        platform.add_false_path_constraints(
-                platform.request("cdr_clk_clean_fabric"))
+            self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-            self.submodules.wrpll = WRPLL(
+        self.csr_devices.append("siphaser")
-                helper_clk_pads=platform.request("ddmtd_helper_clk"),
+        self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
-                main_dcxo_i2c=platform.request("ddmtd_main_dcxo_i2c"),
+        self.csr_devices.append("si5324_rst_n")
-                helper_dxco_i2c=platform.request("ddmtd_helper_dcxo_i2c"),
+        i2c = self.platform.request("i2c")
-                ddmtd_inputs=self.wrpll_sampler)
+        self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
-            self.csr_devices.append("wrpll")
+        self.csr_devices.append("i2c")
-            platform.add_period_constraint(self.wrpll.cd_helper.clk, rtio_clk_period*0.99)
+        self.config["I2C_BUS_COUNT"] = 1
-            platform.add_false_path_constraints(self.crg.cd_sys.clk, self.wrpll.cd_helper.clk)
+        self.config["HAS_SI5324"] = None
-            platform.add_false_path_constraints(self.wrpll.cd_helper.clk, gtp.rxoutclk)
-        else:
-            self.comb += platform.request("filtered_clk_sel").eq(1)
-            self.submodules.siphaser = SiPhaser7Series(
-                si5324_clkin=platform.request("si5324_clkin"),
-                rx_synchronizer=self.rx_synchronizer,
-                ref_clk=self.crg.cd_sys.clk, ref_div2=True,
-                rtio_clk_freq=rtio_clk_freq)
-            platform.add_false_path_constraints(
-                self.crg.cd_sys.clk, self.siphaser.mmcm_freerun_output)
-            self.csr_devices.append("siphaser")
-            self.submodules.si5324_rst_n = gpio.GPIOOut(platform.request("si5324").rst_n)
-            self.csr_devices.append("si5324_rst_n")
-            i2c = self.platform.request("i2c")
-            self.submodules.i2c = gpio.GPIOTristate([i2c.scl, i2c.sda])
-            self.csr_devices.append("i2c")
-            self.config["I2C_BUS_COUNT"] = 1
-            self.config["HAS_SI5324"] = None
 
         platform.add_period_constraint(gtp.txoutclk, rtio_clk_period)
         platform.add_period_constraint(gtp.rxoutclk, rtio_clk_period)
@@ -258,7 +242,6 @@ def main():
     soc_sayma_rtm_args(parser)
     parser.add_argument("--rtio-clk-freq",
         default=150, type=int, help="RTIO clock frequency in MHz")
-    parser.add_argument("--with-wrpll", default=False, action="store_true")
     parser.add_argument("--gateware-identifier-str", default=None,
                         help="Override ROM identifier")
     parser.set_defaults(output_dir=os.path.join("artiq_sayma", "rtm"))
@@ -266,7 +249,6 @@ def main():
 
     soc = Satellite(
         rtio_clk_freq=1e6*args.rtio_clk_freq,
-        with_wrpll=args.with_wrpll,
         gateware_identifier_str=args.gateware_identifier_str,
         **soc_sayma_rtm_argdict(args))
     builder = SatmanSoCBuilder(soc, **builder_argdict(args))

artiq/gateware/test/rtio/test_dma.py

@@ -68,6 +68,7 @@ def do_dma(dut, address):
 test_writes1 = [
     (0x01, 0x23, 0x12, 0x33),
     (0x901, 0x902, 0x11, 0xeeeeeeeeeeeeeefffffffffffffffffffffffffffffff28888177772736646717738388488),
+    (0x82, 0x289, 0x99, int.from_bytes(b"\xf0" * 64, "little")),
     (0x81, 0x288, 0x88, 0x8888)
 ]
 

artiq/gateware/test/wrpll/test_dsp.py

@@ -1,158 +0,0 @@
-import unittest
-
-import numpy as np
-
-from migen import *
-
-from artiq.gateware.drtio.wrpll.ddmtd import Collector
-from artiq.gateware.drtio.wrpll import thls, filters
-
-
-class HelperChainTB(Module):
-    def __init__(self, N):
-        self.tag_ref = Signal(N)
-        self.input_stb = Signal()
-        self.adpll = Signal((24, True))
-        self.out_stb = Signal()
-
-        ###
-
-        self.submodules.collector = Collector(N)
-        self.submodules.loop_filter = thls.make(filters.helper, data_width=48)
-
-        self.comb += [
-            self.collector.tag_ref.eq(self.tag_ref),
-            self.collector.ref_stb.eq(self.input_stb),
-            self.collector.main_stb.eq(self.input_stb),
-            self.loop_filter.input.eq(self.collector.out_helper << 22),
-            self.loop_filter.input_stb.eq(self.collector.out_stb),
-            self.adpll.eq(self.loop_filter.output),
-            self.out_stb.eq(self.loop_filter.output_stb),
-        ]
-
-
-class TestDSP(unittest.TestCase):
-    def test_main_collector(self):
-        N = 2
-        collector = Collector(N=N)
-        # check collector phase unwrapping
-        tags = [(0, 0, 0),
-                (0, 1, 1),
-                (2, 1, -1),
-                (3, 1, -2),
-                (0, 1, -3),
-                (1, 1, -4),
-                (2, 1, -5),
-                (3, 1, -6),
-                (3, 3, -4),
-                (0, 0, -4),
-                (0, 1, -3),
-                (0, 2, -2),
-                (0, 3, -1),
-                (0, 0, 0)]
-        for i in range(10):
-            tags.append((i % (2**N), (i+1) % (2**N), 1))
-
-        def generator():
-            for tag_ref, tag_main, out in tags:
-                yield collector.tag_ref.eq(tag_ref)
-                yield collector.tag_main.eq(tag_main)
-                yield collector.main_stb.eq(1)
-                yield collector.ref_stb.eq(1)
-
-                yield
-
-                yield collector.main_stb.eq(0)
-                yield collector.ref_stb.eq(0)
-
-                while not (yield collector.out_stb):
-                    yield
-
-                out_main = yield collector.out_main
-                self.assertEqual(out_main, out)
-
-        run_simulation(collector, generator())
-
-    def test_helper_collector(self):
-        N = 3
-        collector = Collector(N=N)
-        # check collector phase unwrapping
-        tags = [((2**N - 1 - tag) % (2**N), -1) for tag in range(20)]
-        tags += [((tags[-1][0] + 1 + tag) % (2**N), 1) for tag in range(20)]
-        tags += [((tags[-1][0] - 2 - 2*tag) % (2**N), -2) for tag in range(20)]
-
-        def generator():
-            for tag_ref, out in tags:
-                yield collector.tag_ref.eq(tag_ref)
-                yield collector.main_stb.eq(1)
-                yield collector.ref_stb.eq(1)
-
-                yield
-
-                yield collector.main_stb.eq(0)
-                yield collector.ref_stb.eq(0)
-
-                while not (yield collector.out_stb):
-                    yield
-
-                out_helper = yield collector.out_helper
-                self.assertEqual(out_helper, out)
-
-        run_simulation(collector, generator())
-
-    # test helper collector + filter against output from MATLAB model
-    def test_helper_chain(self):
-        pll = HelperChainTB(15)
-
-        initial_helper_out = -8000
-        ref_tags = np.array([
-           24778, 16789,  8801,   814, 25596, 17612,  9628,  1646,
-           26433, 18453, 10474,  2496, 27287, 19311, 11337,  3364, 28160,
-           20190, 12221,  4253, 29054, 21088, 13124,  5161, 29966, 22005,
-           14045,  6087, 30897, 22940, 14985,  7031, 31847, 23895, 15944,
-            7995,    47, 24869, 16923,  8978,  1035, 25861, 17920,  9981,
-            2042, 26873, 18937, 11002,  3069, 27904, 19973, 12042,  4113,
-           28953, 21026, 13100,  5175, 30020, 22098, 14177,  6257, 31106,
-           23189, 15273,  7358, 32212, 24300, 16388,  8478,   569, 25429,
-           17522,  9617,  1712, 26577, 18675, 10774,  2875, 27745, 19848,
-           11951,  4056, 28930, 21038, 13147,  5256, 30135, 22247, 14361,
-            6475, 31359, 23476, 15595,  7714, 32603, 24725, 16847,  8971,
-            1096
-        ])
-        adpll_sim = np.array([
-              8,   24,   41,   57,   74,   91,  107,  124,  140,  157,  173,
-            190,  206,  223,  239,  256,  273,  289,  306,  322,  339,  355,
-            372,  388,  405,  421,  438,  454,  471,  487,  504,  520,  537,
-            553,  570,  586,  603,  619,  636,  652,  668,  685,  701,  718,
-            734,  751,  767,  784,  800,  817,  833,  850,  866,  882,  899,
-            915,  932,  948,  965,  981,  998, 1014, 1030, 1047, 1063, 1080,
-           1096, 1112, 1129, 1145, 1162, 1178, 1194, 1211, 1227, 1244, 1260,
-           1276, 1293, 1309, 1326, 1342, 1358, 1375, 1391, 1407, 1424, 1440,
-           1457, 1473, 1489, 1506, 1522, 1538, 1555, 1571, 1587, 1604, 1620,
-           1636])
-
-        def sim():
-            yield pll.collector.out_helper.eq(initial_helper_out)
-            for ref_tag, adpll_matlab in zip(ref_tags, adpll_sim):
-                # feed collector
-                yield pll.tag_ref.eq(int(ref_tag))
-                yield pll.input_stb.eq(1)
-
-                yield
-
-                yield pll.input_stb.eq(0)
-
-                while not (yield pll.collector.out_stb):
-                    yield
-
-                tag_diff = yield pll.collector.out_helper
-
-                while not (yield pll.loop_filter.output_stb):
-                    yield
-
-                adpll_migen = yield pll.adpll
-                self.assertEqual(adpll_migen, adpll_matlab)
-
-                yield
-
-        run_simulation(pll, [sim()])

artiq/gateware/test/wrpll/test_thls.py

@@ -1,55 +0,0 @@
-import unittest
-
-from migen import *
-
-from artiq.gateware.drtio.wrpll import thls
-
-
-a = 0
-
-def simple_test(x):
-    global a
-    a = a + (x*4 >> 1)
-    return a
-
-
-class TestTHLS(unittest.TestCase):
-    def test_thls(self):
-        global a
-
-        proc = thls.Processor()
-        a = 0
-        cp = thls.compile(proc, simple_test)
-        print("Program:")
-        cp.pretty_print()
-        cp.dimension_processor()
-        print("Encoded program:", cp.encode())
-        proc_impl = proc.implement(cp.encode(), cp.data)
-
-        def send_values(values):
-            for value in values:
-                yield proc_impl.input.eq(value)
-                yield proc_impl.input_stb.eq(1)
-                yield
-                yield proc_impl.input.eq(0)
-                yield proc_impl.input_stb.eq(0)
-                yield
-                while (yield proc_impl.busy):
-                    yield
-        @passive
-        def receive_values(callback):
-            while True:
-                while not (yield proc_impl.output_stb):
-                    yield
-                callback((yield proc_impl.output))
-                yield
-
-        send_list = [42, 40, 10, 10]
-        receive_list = []
-
-        run_simulation(proc_impl, [send_values(send_list), receive_values(receive_list.append)])
-        print("Execution:", send_list, "->", receive_list)
-
-        a = 0
-        expected_list = [simple_test(x) for x in send_list]
-        self.assertEqual(receive_list, expected_list)

artiq/language/environment.py

@@ -485,7 +485,7 @@ def is_experiment(o):
 
 
 def is_public_experiment(o):
-    """Checks if a Pyhton object is a top-level,
+    """Checks if a Python object is a top-level,
     non underscore-prefixed, experiment class.
     """
     return is_experiment(o) and not o.__name__.startswith("_")

artiq/language/scan.py

@@ -83,8 +83,7 @@ class RangeScan(ScanObject):
             self.sequence = [i*dx + start for i in range(npoints)]
 
         if randomize:
-            rng = random.Random(seed)
+            random.Random(seed).shuffle(self.sequence)
-            random.shuffle(self.sequence, rng.random)
 
     def __iter__(self):
         return iter(self.sequence)
@@ -120,8 +119,7 @@ class CenterScan(ScanObject):
                              for i in range(n) for sign in [-1, 1]][1:]
 
         if randomize:
-            rng = random.Random(seed)
+            random.Random(seed).shuffle(self.sequence)
-            random.shuffle(self.sequence, rng.random)
 
     def __iter__(self):
         return iter(self.sequence)

artiq/master/scheduler.py

@@ -1,6 +1,7 @@
 import asyncio
 import logging
 import csv
+import os.path
 from enum import Enum
 from time import time
 
@@ -131,7 +132,8 @@ class RunPool:
             writer.writerow([rid, start_time, expid["file"]])
 
     def submit(self, expid, priority, due_date, flush, pipeline_name):
-        # mutates expid to insert head repository revision if None.
+        # mutates expid to insert head repository revision if None and
+        # replaces relative path with the absolute one.
         # called through scheduler.
         rid = self.ridc.get()
         if "repo_rev" in expid:
@@ -140,7 +142,10 @@ class RunPool:
             wd, repo_msg = self.experiment_db.repo_backend.request_rev(
                 expid["repo_rev"])
         else:
+            if "file" in expid:
+                expid["file"] = os.path.abspath(expid["file"])
             wd, repo_msg = None, None
+
         run = Run(rid, pipeline_name, wd, expid, priority, due_date, flush,
                   self, repo_msg=repo_msg)
         if self.log_submissions is not None:          
@@ -425,7 +430,8 @@ class Scheduler:
         When called through an experiment, the default values of
         ``pipeline_name``, ``expid`` and ``priority`` correspond to those of
         the current run."""
-        # mutates expid to insert head repository revision if None
+        # mutates expid to insert head repository revision if None, and
+        # replaces relative file path with absolute one
         if self._terminated:
             return
         try:

artiq/master/worker_impl.py

@@ -350,9 +350,13 @@ def main():
             elif action == "analyze":
                 try:
                     exp_inst.analyze()
-                    put_completed()
                 finally:
-                    write_results()
+                    # browser's analyze shouldn't write results,
+                    # since it doesn't run the experiment and cannot have rid
+                    if rid is not None:
+                        write_results()
+
+                put_completed()
             elif action == "examine":
                 examine(ExamineDeviceMgr, ExamineDatasetMgr, obj["file"])
                 put_completed()

artiq/test/coredevice/test_embedding.py

@@ -74,11 +74,17 @@ class RoundtripTest(ExperimentCase):
     def test_object_list(self):
         self.assertRoundtrip([object(), object()])
 
+    def test_object_tuple(self):
+        self.assertRoundtrip((False, object(), True, 0x12345678))
+
     def test_list_tuple(self):
         self.assertRoundtrip(([1, 2], [3, 4]))
 
     def test_list_mixed_tuple(self):
-        self.assertRoundtrip([(0x12345678, [("foo", [0.0, 1.0], [0, 1])])])
+        self.assertRoundtrip([
+            (0x12345678, [("foo", [0.0, 1.0], [0, 1])]),
+            (0x23456789, [("bar", [2.0, 3.0], [2, 3])])])
+        self.assertRoundtrip([(0, 1.0, 0), (1, 1.5, 2), (2, 1.9, 4)])
 
     def test_array_1d(self):
         self.assertArrayRoundtrip(numpy.array([True, False]))
@@ -520,19 +526,32 @@ class NumpyBoolTest(ExperimentCase):
 class _Alignment(EnvExperiment):
     def build(self):
         self.setattr_device("core")
+        self.a = False
+        self.b = 1234.5678
+        self.c = True
+        self.d = True
+        self.e = 2345.6789
+        self.f = False
 
     @rpc
-    def a_tuple(self) -> TList(TTuple([TBool, TFloat, TBool])):
+    def get_tuples(self) -> TList(TTuple([TBool, TFloat, TBool])):
-        return [(True, 1234.5678, True)]
+        return [(self.a, self.b, self.c), (self.d, self.e, self.f)]
 
     @kernel
     def run(self):
-        a, b, c = self.a_tuple()[0]
+        # Run two RPCs before checking to catch any obvious allocation size calculation
-        d, e, f = self.a_tuple()[0]
+        # issues (i.e. use of uninitialised stack memory).
-        assert a == d
+        tuples0 = self.get_tuples()
-        assert b == e
+        tuples1 = self.get_tuples()
-        assert c == f
+        for tuples in [tuples0, tuples1]:
-        return 0
+            a, b, c = tuples[0]
+            d, e, f = tuples[1]
+            assert a == self.a
+            assert b == self.b
+            assert c == self.c
+            assert d == self.d
+            assert e == self.e
+            assert f == self.f
 
 
 class AlignmentTest(ExperimentCase):
@@ -554,3 +573,29 @@ class NumpyQuotingTest(ExperimentCase):
     def test_issue_1871(self):
         """Ensure numpy.array() does not break NumPy math functions"""
         self.create(_NumpyQuoting).run()
+
+
+class _IntBoundary(EnvExperiment):
+    def build(self):
+        self.setattr_device("core")
+        self.int32_min = numpy.iinfo(numpy.int32).min
+        self.int32_max = numpy.iinfo(numpy.int32).max
+        self.int64_min = numpy.iinfo(numpy.int64).min
+        self.int64_max = numpy.iinfo(numpy.int64).max
+
+    @kernel
+    def test_int32_bounds(self, min_val: TInt32, max_val: TInt32):
+        return min_val == self.int32_min and max_val == self.int32_max
+
+    @kernel
+    def test_int64_bounds(self, min_val: TInt64, max_val: TInt64):
+        return min_val == self.int64_min and max_val == self.int64_max
+
+    @kernel
+    def run(self):
+        self.test_int32_bounds(self.int32_min, self.int32_max)
+        self.test_int64_bounds(self.int64_min, self.int64_max)
+
+class IntBoundaryTest(ExperimentCase):
+    def test_int_boundary(self):
+        self.create(_IntBoundary).run()

artiq/test/coredevice/test_exceptions.py

@@ -0,0 +1,59 @@
+import unittest
+import artiq.coredevice.exceptions as exceptions
+
+from artiq.experiment import *
+from artiq.test.hardware_testbench import ExperimentCase
+from artiq.compiler.embedding import EmbeddingMap
+from artiq.coredevice.core import test_exception_id_sync
+
+"""
+Test sync in exceptions raised between host and kernel
+Check `artiq.compiler.embedding` and `artiq::firmware::ksupport::eh_artiq`
+
+Considers the following two cases:
+    1) Exception raised on kernel and passed to host
+    2) Exception raised in a host function called from kernel
+Ensures same exception is raised on both kernel and host in either case
+"""
+
+exception_names = EmbeddingMap().str_reverse_map
+
+
+class _TestExceptionSync(EnvExperiment):
+    def build(self):
+        self.setattr_device("core")
+    
+    @rpc
+    def _raise_exception_host(self, id):
+        exn = exception_names[id].split('.')[-1].split(':')[-1]
+        exn = getattr(exceptions, exn)
+        raise exn
+
+    @kernel
+    def raise_exception_host(self, id):
+        self._raise_exception_host(id)
+
+    @kernel
+    def raise_exception_kernel(self, id):
+        test_exception_id_sync(id)
+
+    
+class ExceptionTest(ExperimentCase):
+    def test_raise_exceptions_kernel(self):
+        exp = self.create(_TestExceptionSync)
+        
+        for id, name in list(exception_names.items())[::-1]:
+            name = name.split('.')[-1].split(':')[-1]
+            with self.assertRaises(getattr(exceptions, name)) as ctx:
+                exp.raise_exception_kernel(id)
+            self.assertEqual(str(ctx.exception).strip("'"), name)
+            
+            
+    def test_raise_exceptions_host(self):
+        exp = self.create(_TestExceptionSync)
+
+        for id, name in exception_names.items():
+            name = name.split('.')[-1].split(':')[-1]
+            with self.assertRaises(getattr(exceptions, name)) as ctx:
+                exp.raise_exception_host(id)
+

artiq/test/lit/embedding/class_same_name.py

@@ -0,0 +1,51 @@
+# RUN: %python -m artiq.compiler.testbench.embedding %s
+
+from artiq.language.core import *
+
+
+class InnerA:
+    def __init__(self, val):
+        self.val = val
+
+    @kernel
+    def run_once(self):
+        return self.val
+
+
+class InnerB:
+    def __init__(self, val):
+        self.val = val
+
+    @kernel
+    def run_once(self):
+        return self.val
+
+
+def make_runner(InnerCls, val):
+    class Runner:
+        def __init__(self):
+            self.inner = InnerCls(val)
+
+        @kernel
+        def run_once(self):
+            return self.inner.run_once()
+
+    return Runner()
+
+
+class Parent:
+    def __init__(self):
+        self.a = make_runner(InnerA, 1)
+        self.b = make_runner(InnerB, 42.0)
+
+    @kernel
+    def run_once(self):
+        return self.a.run_once() + self.b.run_once()
+
+
+parent = Parent()
+
+
+@kernel
+def entrypoint():
+    parent.run_once()

artiq/test/lit/embedding/mixed_tuple.py

@@ -0,0 +1,16 @@
+# RUN: %python -m artiq.compiler.testbench.embedding %s
+
+from artiq.language.core import *
+from artiq.language.types import *
+
+@kernel
+def consume_tuple(x: TTuple([TInt32, TBool])):
+    print(x)
+
+@kernel
+def return_tuple() -> TTuple([TInt32, TBool]):
+    return (123, False)
+
+@kernel
+def entrypoint():
+    consume_tuple(return_tuple())

artiq/test/test_scheduler.py

@@ -141,132 +141,21 @@ class SchedulerCase(unittest.TestCase):
         high_priority = 3
         middle_priority = 2
         low_priority = 1
+
+        # "late" is far in the future, beyond any reasonable test timeout.
         late = time() + 100000
         early = time() + 1
 
-        expect = [
+        middle_priority_done = asyncio.Event()
-            {
+        def notify(mod):
-                "path": [],
+            # Watch for the "middle_priority" experiment's completion
-                "action": "setitem",
+            if mod == {
-                "value": {
-                    "repo_msg": None,
-                    "priority": low_priority,
-                    "pipeline": "main",
-                    "due_date": None,
-                    "status": "pending",
-                    "expid": expid_bg,
-                    "flush": False
-                },
-                "key": 0
-            },
-            {
-                "path": [],
-                "action": "setitem",
-                "value": {
-                    "repo_msg": None,
-                    "priority": high_priority,
-                    "pipeline": "main",
-                    "due_date": late,
-                    "status": "pending",
-                    "expid": expid_empty,
-                    "flush": False
-                },
-                "key": 1
-            },
-            {
-                "path": [],
-                "action": "setitem",
-                "value": {
-                    "repo_msg": None,
-                    "priority": middle_priority,
-                    "pipeline": "main",
-                    "due_date": early,
-                    "status": "pending",
-                    "expid": expid_empty,
-                    "flush": False
-                },
-                "key": 2
-            },
-            {
-                "path": [0],
-                "action": "setitem",
-                "value": "preparing",
-                "key": "status"
-            },
-            {
-                "path": [0],
-                "action": "setitem",
-                "value": "prepare_done",
-                "key": "status"
-            },
-            {
-                "path": [0],
-                "action": "setitem",
-                "value": "running",
-                "key": "status"
-            },
-            {
-                "path": [2],
-                "action": "setitem",
-                "value": "preparing",
-                "key": "status"
-            },
-            {
-                "path": [2],
-                "action": "setitem",
-                "value": "prepare_done",
-                "key": "status"
-            },
-            {
-                "path": [0],
-                "action": "setitem",
-                "value": "paused",
-                "key": "status"
-            },
-            {
-                "path": [2],
-                "action": "setitem",
-                "value": "running",
-                "key": "status"
-            },
-            {
                 "path": [2],
                 "action": "setitem",
                 "value": "run_done",
                 "key": "status"
-            },
+            }:
-            {
+                middle_priority_done.set()
-                "path": [0],
-                "action": "setitem",
-                "value": "running",
-                "key": "status"
-            },
-            {
-                "path": [2],
-                "action": "setitem",
-                "value": "analyzing",
-                "key": "status"
-            },
-            {
-                "path": [2],
-                "action": "setitem",
-                "value": "deleting",
-                "key": "status"
-            },
-            {
-                "path": [],
-                "action": "delitem",
-                "key": 2
-            },
-        ]
-        done = asyncio.Event()
-        expect_idx = 0
-        def notify(mod):
-            nonlocal expect_idx
-            self.assertEqual(mod, expect[expect_idx])
-            expect_idx += 1
-            if expect_idx >= len(expect):
-                done.set()
         scheduler.notifier.publish = notify
 
         scheduler.start()
@@ -275,7 +164,9 @@ class SchedulerCase(unittest.TestCase):
         scheduler.submit("main", expid_empty, high_priority, late)
         scheduler.submit("main", expid_empty, middle_priority, early)
 
-        loop.run_until_complete(done.wait())
+        # Check that the "middle_priority" experiment finishes. This would hang for a
+        # long time (until "late") if the due times were not being respected.
+        loop.run_until_complete(middle_priority_done.wait())
         scheduler.notifier.publish = None
         loop.run_until_complete(scheduler.stop())
 

doc/manual/developing.rst

@@ -9,14 +9,14 @@ Developing ARTIQ
 The easiest way to obtain an ARTIQ development environment is via the Nix package manager on Linux. The Nix system is used on the `M-Labs Hydra server <https://nixbld.m-labs.hk/>`_ to build ARTIQ and its dependencies continuously; it ensures that all build instructions are up-to-date and allows binary packages to be used on developers' machines, in particular for large tools such as the Rust compiler.
 ARTIQ itself does not depend on Nix, and it is also possible to compile everything from source (look into the ``flake.nix`` file and/or nixpkgs, and run the commands manually) - but Nix makes the process a lot easier.
 
-* Download Vivado from Xilinx and install it (by running the official installer in a FHS chroot environment if using NixOS; the ARTIQ flake provides such an environment). If you do not want to write to ``/opt``, you can install it in a folder of your home directory. The "appropriate" Vivado version to use for building the bitstream can vary. Some versions contain bugs that lead to hidden or visible failures, others work fine. Refer to `Hydra <https://nixbld.m-labs.hk/>`_ and/or the ``flake.nix`` file from the ARTIQ repository in order to determine which version is used at M-Labs. If the Vivado GUI installer crashes, you may be able to work around the problem by running it in unattended mode with a command such as ``./xsetup -a XilinxEULA,3rdPartyEULA,WebTalkTerms -b Install -e 'Vitis Unified Software Platform' -l /opt/Xilinx/``.
+* Download Vivado from Xilinx and install it (by running the official installer in a FHS chroot environment if using NixOS; the ARTIQ flake provides such an environment, which can be entered with the command ``vivado-env``). If you do not want to write to ``/opt``, you can install it in a folder of your home directory. The "appropriate" Vivado version to use for building the bitstream can vary. Some versions contain bugs that lead to hidden or visible failures, others work fine. Refer to `Hydra <https://nixbld.m-labs.hk/>`_ and/or the ``flake.nix`` file from the ARTIQ repository in order to determine which version is used at M-Labs. If the Vivado GUI installer crashes, you may be able to work around the problem by running it in unattended mode with a command such as ``./xsetup -a XilinxEULA,3rdPartyEULA,WebTalkTerms -b Install -e 'Vitis Unified Software Platform' -l /opt/Xilinx/``.Platform' -l /opt/Xilinx/``.
 * During the Vivado installation, uncheck ``Install cable drivers`` (they are not required as we use better and open source alternatives).
 * Install the `Nix package manager <http://nixos.org/nix/>`_, version 2.4 or later. Prefer a single-user installation for simplicity.
 * If you did not install Vivado in its default location ``/opt``, clone the ARTIQ Git repository and edit ``flake.nix`` accordingly.
 * Enable flakes in Nix by e.g. adding ``experimental-features = nix-command flakes`` to ``nix.conf`` (for example ``~/.config/nix/nix.conf``).
-* Enter the development shell by running ``nix develop git+https://github.com/m-labs/artiq.git``, or alternatively by cloning the ARTIQ Git repository and running ``nix develop`` at the root (where ``flake.nix`` is).
+* Enter the development shell by running ``nix develop git+https://github.com/m-labs/artiq.git\?ref=release-7``, or alternatively by cloning the ARTIQ Git repository and running ``nix develop`` at the root (where ``flake.nix`` is).
 * You can then build the firmware and gateware with a command such as ``$ python -m artiq.gateware.targets.kasli``. If you are using a JSON system description file, use ``$ python -m artiq.gateware.targets.kasli_generic file.json``.
-* Flash the binaries into the FPGA board with a command such as ``$ artiq_flash --srcbuild -d artiq_kasli -V <your_variant>``. You need to configure OpenOCD as explained :ref:`in the user section <configuring-openocd>`. OpenOCD is already part of the flake's development environment.
+* Flash the binaries into the FPGA board with a command such as ``$ artiq_flash --srcbuild -d artiq_kasli/<your_variant>``. You need to configure OpenOCD as explained :ref:`in the user section <configuring-openocd>`. OpenOCD is already part of the flake's development environment.
 * Check that the board boots and examine the UART messages by running a serial terminal program, e.g. ``$ flterm /dev/ttyUSB1`` (``flterm`` is part of MiSoC and installed in the flake's development environment). Leave the terminal running while you are flashing the board, so that you see the startup messages when the board boots immediately after flashing. You can also restart the board (without reflashing it) with ``$ artiq_flash start``.
 * The communication parameters are 115200 8-N-1. Ensure that your user has access to the serial device (e.g. by adding the user account to the ``dialout`` group).
 

doc/manual/developing_a_ndsp.rst

@@ -132,7 +132,7 @@ We suggest that you define a function ``get_argparser`` that returns the argumen
 Logging
 -------
 
-For the debug, information and warning messages, use the ``logging`` Python module and print the log on the standard error output (the default setting). The logging level is by default "WARNING", meaning that only warning messages and more critical messages will get printed (and no debug nor information messages). By calling ``sipyco.common_args.verbosity_args`` with the parser as argument, you add support for the ``--verbose`` (``-v``) and ``--quiet`` (``-q``) arguments in the parser. Each occurence of ``-v`` (resp. ``-q``) in the arguments will increase (resp. decrease) the log level of the logging module. For instance, if only one ``-v`` is present in the arguments, then more messages (info, warning and above) will get printed. If only one ``-q`` is present in the arguments, then only errors and critical messages will get printed. If ``-qq`` is present in the arguments, then only critical messages will get printed, but no debug/info/warning/error.
+For the debug, information and warning messages, use the ``logging`` Python module and print the log on the standard error output (the default setting). The logging level is by default "WARNING", meaning that only warning messages and more critical messages will get printed (and no debug nor information messages). By calling ``sipyco.common_args.verbosity_args`` with the parser as argument, you add support for the ``--verbose`` (``-v``) and ``--quiet`` (``-q``) arguments in the parser. Each occurrence of ``-v`` (resp. ``-q``) in the arguments will increase (resp. decrease) the log level of the logging module. For instance, if only one ``-v`` is present in the arguments, then more messages (info, warning and above) will get printed. If only one ``-q`` is present in the arguments, then only errors and critical messages will get printed. If ``-qq`` is present in the arguments, then only critical messages will get printed, but no debug/info/warning/error.
 
 The program below exemplifies how to use logging: ::
 

doc/manual/faq.rst

@@ -81,7 +81,7 @@ It will give you the ``/dev/ttyUSBxx`` (or the ``COMxx`` for Windows) device
 names.
 The ``hwid:`` field gives you the string you can pass via the ``hwgrep://``
 feature of pyserial
-`serial_for_url() <http://pyserial.sourceforge.net/pyserial_api.html#serial.serial_for_url>`_
+`serial_for_url() <https://pythonhosted.org/pyserial/pyserial_api.html#serial.serial_for_url>`_
 in order to open a serial device.
 
 The preferred way to specify a serial device is to make use of the ``hwgrep://``

doc/manual/getting_started_core.rst

@@ -23,10 +23,10 @@ As a very first step, we will turn on a LED on the core device. Create a file ``
 
 The central part of our code is our ``LED`` class, which derives from :class:`artiq.language.environment.EnvExperiment`. Among other features, :class:`~artiq.language.environment.EnvExperiment` calls our :meth:`~artiq.language.environment.Experiment.build` method and provides the :meth:`~artiq.language.environment.HasEnvironment.setattr_device` method that interfaces to the device database to create the appropriate device drivers and make those drivers accessible as ``self.core`` and ``self.led``. The :func:`~artiq.language.core.kernel` decorator (``@kernel``) tells the system that the :meth:`~artiq.language.environment.Experiment.run` method must be compiled for and executed on the core device (instead of being interpreted and executed as regular Python code on the host). The decorator uses ``self.core`` internally, which is why we request the core device using :meth:`~artiq.language.environment.HasEnvironment.setattr_device` like any other.
 
-Copy the file ``device_db.py`` (containing the device database) from the ``examples/master`` folder of ARTIQ into the same directory as ``led.py`` (alternatively, you can use the ``--device-db`` option of ``artiq_run``). You will probably want to set the IP address of the core device in ``device_db.py`` so that the computer can connect to it (it is the ``host`` parameter of the ``comm`` entry). See :ref:`device-db` for more information. The example device database is designed for the ``nist_clock`` hardware adapter on the KC705; see :ref:`board-ports` for RTIO channel assignments if you need to adapt the device database to a different hardware platform.
+You will need to supply the correct device database for your core device; it is generated by a Python script typically called ``device_db.py`` (see also :ref:`device_db`). If you purchased a system from M-Labs, the device database is provided either on the USB stick or inside ~/artiq on the NUC; otherwise, you can also find examples in the ``examples`` folder of ARTIQ, sorted inside the corresponding subfolder for your core device. Copy ``device_db.py`` into the same directory as ``led.py`` (or use the ``--device-db`` option of ``artiq_run``). The field ``core_addr``, placed at the top of the file, needs to match the IP address of your core device so your computer can communicate with it. If you purchased a pre-assembled system it is normally already set correctly.
 
 .. note::
-    To obtain the examples, you can find where the ARTIQ package is installed on your machine with: ::
+       To access the examples, you can find where the ARTIQ package is installed on your machine with: ::
 
         python3 -c "import artiq; print(artiq.__path__[0])"
 

doc/manual/getting_started_mgmt.rst

@@ -10,7 +10,7 @@ Starting your first experiment with the master
 
 In the previous tutorial, we used the ``artiq_run`` utility to execute our experiments, which is a simple stand-alone tool that bypasses the ARTIQ management system. We will now see how to run an experiment using the master (the central program in the management system that schedules and executes experiments) and the dashboard (that connects to the master and controls it).
 
-First, create a folder ``~/artiq-master`` and copy the file ``device_db.py`` (containing the device database) found in the ``examples/master`` directory from the ARTIQ sources. The master uses those files in the same way as ``artiq_run``.
+First, create a folder ``~/artiq-master`` and copy your ``device_db.py`` into it (the file containing the device database, found either with your materials or in the ``examples`` subfolder for your core device, as described in :ref:`connecting-to-the-core-device`) The master uses those files in the same way as ``artiq_run``.
 
 Then create a ``~/artiq-master/repository`` sub-folder to contain experiments. The master scans this ``repository`` folder to determine what experiments are available (the name of the folder can be changed using ``-r``).
 

doc/manual/installing.rst

@@ -14,14 +14,14 @@ In the current state of affairs, we recommend that Linux users install ARTIQ via
 Installing via Nix (Linux)
 --------------------------
 
-First, install the Nix package manager. Some distributions provide a package for the Nix package manager, otherwise, it can be installed via the script on the `Nix website <http://nixos.org/nix/>`_. Make sure you get Nix version 2.4 or higher.
+First, install the Nix package manager. Some distributions provide a package for the Nix package manager, otherwise, it can be installed via the script on the `Nix website <https://nixos.org/download/>`_. Make sure you get Nix version 2.4 or higher.
 
 Once Nix is installed, enable Flakes: ::
 
   $ mkdir -p ~/.config/nix
   $ echo "experimental-features = nix-command flakes" > ~/.config/nix/nix.conf
 
-The easiest way to obtain ARTIQ is then to install it into the user environment with ``$ nix profile install git+https://github.com/m-labs/artiq.git``. Answer "Yes" to the questions about setting Nix configuration options. This provides a minimal installation of ARTIQ where the usual commands (``artiq_master``, ``artiq_dashboard``, ``artiq_run``, etc.) are available.
+The easiest way to obtain ARTIQ is then to install it into the user environment with ``$ nix profile install git+https://github.com/m-labs/artiq.git\?ref=release-7``. Answer "Yes" to the questions about setting Nix configuration options. This provides a minimal installation of ARTIQ where the usual commands (``artiq_master``, ``artiq_dashboard``, ``artiq_run``, etc.) are available.
 
 This installation is however quite limited, as Nix creates a dedicated Python environment for the ARTIQ commands alone. This means that other useful Python packages that you may want (pandas, matplotlib, ...) are not available to them.
 
@@ -30,8 +30,8 @@ Installing multiple packages and making them visible to the ARTIQ commands requi
 ::
 
   {
-    inputs.artiq.url = "git+https://github.com/m-labs/artiq.git";
+    inputs.artiq.url = "git+https://github.com/m-labs/artiq.git?ref=release-7";
-    inputs.extrapkg.url = "git+https://git.m-labs.hk/M-Labs/artiq-extrapkg.git";
+    inputs.extrapkg.url = "git+https://git.m-labs.hk/M-Labs/artiq-extrapkg.git?ref=release-7";
     inputs.extrapkg.inputs.artiq.follows = "artiq";
     outputs = { self, artiq, extrapkg }:
       let
@@ -79,6 +79,10 @@ Installing multiple packages and making them visible to the ARTIQ commands requi
           ];
         };
       };
+    nixConfig = {  # work around https://github.com/NixOS/nix/issues/6771
+      extra-trusted-public-keys = "nixbld.m-labs.hk-1:5aSRVA5b320xbNvu30tqxVPXpld73bhtOeH6uAjRyHc=";
+      extra-substituters = "https://nixbld.m-labs.hk";
+    };
   }
 
 
@@ -96,7 +100,7 @@ Installing via Conda (Windows, Linux)
 .. warning::
   For Linux users, the Nix package manager is preferred, as it is more reliable and faster than Conda.
 
-First, install `Anaconda <https://www.anaconda.com/distribution/>`_ or the more minimalistic `Miniconda <https://conda.io/en/latest/miniconda.html>`_.
+First, install `Anaconda <https://www.anaconda.com/download>`_ or the more minimalistic `Miniconda <https://conda.io/en/latest/miniconda.html>`_.
 
 After installing either Anaconda or Miniconda, open a new terminal (also known as command line, console, or shell and denoted here as lines starting with ``$``) and verify the following command works::
 
@@ -108,12 +112,18 @@ Controllers for third-party devices (e.g. Thorlabs TCube, Lab Brick Digital Atte
 
 Set up the Conda channel and install ARTIQ into a new Conda environment: ::
 
-    $ conda config --prepend channels https://conda.m-labs.hk/artiq-beta
+    $ conda config --prepend channels https://conda.m-labs.hk/artiq-legacy
     $ conda config --append channels conda-forge
     $ conda create -n artiq artiq
 
 .. note::
-  If you do not need to flash boards, the ``artiq`` package is sufficient. The packages named ``artiq-board-*`` contain only firmware for the FPGA board, and you should not install them unless you are reflashing an FPGA board. Controllers for third-party devices (e.g. Thorlabs TCube, Lab Brick Digital Attenuator, etc.) that are not shipped with ARTIQ can also be installed with Conda. Browse `Hydra <https://nixbld.m-labs.hk/project/artiq>`_ or see the list of NDSPs in this manual to find the names of the corresponding packages.
+  The board-specific files containing bitstream and firmware for the FPGA board can be obtained through AFWS, and are only required when flashing. Controllers for third-party devices (e.g. Thorlabs TCube, Lab Brick Digital Attenuator, etc.) that are not shipped with ARTIQ can also be installed with Conda. Browse `Hydra <https://nixbld.m-labs.hk/project/artiq>`_ or see the list of NDSPs in this manual to find the names of the corresponding packages.
+
+.. note::
+  On Windows, if the last command that creates and installs the ARTIQ environment fails with an error similar to "seeking backwards is not allowed", try to re-run the command with admin rights.
+
+.. note::
+  For commercial use you might need a license for Anaconda/Miniconda or for using the Anaconda package channel. `Miniforge <https://github.com/conda-forge/miniforge>`_ might be an alternative in a commercial environment as it does not include the Anaconda package channel by default. If you want to use Anaconda/Miniconda/Miniforge in a commercial environment, please check the license and the latest terms of service.
 
 After the installation, activate the newly created environment by name. ::
 
@@ -219,7 +229,7 @@ If you have an active firmware subscription with M-Labs or QUARTIQ, you can obta
 
 Run the command::
 
-  $ afws_client [username] build [variant] [afws_directory]
+  $ afws_client [username] build [afws_directory] [variant]
 
 Replace ``[username]`` with the login name that was given to you with the subscription, ``[variant]`` with the name of your system variant, and ``[afws_directory]`` with the name of an empty directory, which will be created by the command if it does not exist. Enter your password when prompted and wait for the build (if applicable) and download to finish. If you experience issues with the AFWS client, write to the helpdesk@ email.
 
@@ -261,19 +271,13 @@ If you purchased a Kasli device from M-Labs, it usually comes with the IP addres
 
 and then reboot the device (with ``artiq_flash start`` or a power cycle).
 
-If the ip config field is not set, or set to "use_dhcp" then the device will attempt to obtain an IP address using
+In other cases, install OpenOCD as before, and flash the IP (and, if necessary, MAC) addresses directly: ::
-DHCP. If a static IP address is wanted, install OpenOCD as before, and flash the IP (and, if necessary, MAC) addresses
-directly: ::
 
   $ artiq_mkfs flash_storage.img -s mac xx:xx:xx:xx:xx:xx -s ip xx.xx.xx.xx
   $ artiq_flash -t [board] -V [variant] -f flash_storage.img storage start
 
 For Kasli devices, flashing a MAC address is not necessary as they can obtain it from their EEPROM.
 
-If DHCP has been used the address can be found in the console output, which can be viewed using: ::
-
-  $ python -m misoc.tools.flterm /dev/ttyUSB2
-
 Check that you can ping the device. If ping fails, check that the Ethernet link LED is ON - on Kasli, it is the LED next to the SFP0 connector. As a next step, look at the messages emitted on the UART during boot. Use a program such as flterm or PuTTY to connect to the device's serial port at 115200bps 8-N-1 and reboot the device. On Kasli, the serial port is on FTDI channel 2 with v1.1 hardware (with channel 0 being JTAG) and on FTDI channel 1 with v1.0 hardware.
 
 If you want to use IPv6, the device also has a link-local address that corresponds to its EUI-64, and an additional arbitrary IPv6 address can be defined by using the ``ip6`` configuration key. All IPv4 and IPv6 addresses can be used at the same time.

doc/manual/list_of_ndsps.rst

@@ -3,28 +3,28 @@ List of available NDSPs
 
 The following network device support packages are available for ARTIQ. If you would like to add yours to this list, just send us an email or a pull request.
 
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Equipment                       | Nix package                       | Conda package                    | Documentation                                                                                       | URL                                                    |
+| Equipment                       | Nix package                       | Conda package                    | Documentation                                                    | URL                                                    |
-+=================================+===================================+==================================+=====================================================================================================+========================================================+
++=================================+===================================+==================================+==================================================================+========================================================+
-| PDQ2                            | Not available                     | Not available                    | `HTML <https://pdq.readthedocs.io>`_                                                                | https://github.com/m-labs/pdq                          |
+| PDQ2                            | Not available                     | Not available                    | `HTML <https://pdq.readthedocs.io>`_                             | https://github.com/m-labs/pdq                          |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Lab Brick Digital Attenuator    | ``lda``                           | ``lda``                          | `HTML <https://nixbld.m-labs.hk/job/artiq/full/lda-manual-html/latest/download/1>`_                 | https://github.com/m-labs/lda                          |
+| Lab Brick Digital Attenuator    | ``lda``                           | ``lda``                          | Not available                                                    | https://github.com/m-labs/lda                          |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Novatech 409B                   | ``novatech409b``                  | ``novatech409b``                 | `HTML <https://nixbld.m-labs.hk/job/artiq/full/novatech409b-manual-html/latest/download/1>`_        | https://github.com/m-labs/novatech409b                 |
+| Novatech 409B                   | ``novatech409b``                  | ``novatech409b``                 | Not available                                                    | https://github.com/m-labs/novatech409b                 |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Thorlabs T-Cubes                | ``thorlabs_tcube``                | ``thorlabs_tcube``               | `HTML <https://nixbld.m-labs.hk/job/artiq/full/thorlabs_tcube-manual-html/latest/download/1>`_      | https://github.com/m-labs/thorlabs_tcube               |
+| Thorlabs T-Cubes                | ``thorlabs_tcube``                | ``thorlabs_tcube``               | Not available                                                    | https://github.com/m-labs/thorlabs_tcube               |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Korad KA3005P                   | ``korad_ka3005p``                 | ``korad_ka3005p``                | `HTML <https://nixbld.m-labs.hk/job/artiq/full/korad_ka3005p-manual-html/latest/download/1>`_       | https://github.com/m-labs/korad_ka3005p                |
+| Korad KA3005P                   | ``korad_ka3005p``                 | ``korad_ka3005p``                | Not available                                                    | https://github.com/m-labs/korad_ka3005p                |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Newfocus 8742                   | ``newfocus8742``                  | ``newfocus8742``                 | `HTML <https://nixbld.m-labs.hk/job/artiq/full/newfocus8742-manual-html/latest/download/1>`_        | https://github.com/quartiq/newfocus8742                |
+| Newfocus 8742                   | ``newfocus8742``                  | ``newfocus8742``                 | Not available                                                    | https://github.com/quartiq/newfocus8742                |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Princeton Instruments PICam     | Not available                     | Not available                    | Not available                                                                                       | https://github.com/quartiq/picam                       |
+| Princeton Instruments PICam     | Not available                     | Not available                    | Not available                                                    | https://github.com/quartiq/picam                       |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| Anel HUT2 power distribution    | ``hut2``                          | ``hut2``                         | `HTML <https://nixbld.m-labs.hk/job/artiq/full/hut2-manual-html/latest/download/1>`_                | https://github.com/quartiq/hut2                        |
+| Anel HUT2 power distribution    | ``hut2``                          | ``hut2``                         | Not available                                                    | https://github.com/quartiq/hut2                        |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| TOPTICA lasers                  | ``toptica-lasersdk-artiq``        | ``toptica-lasersdk-artiq``       | Not available                                                                                       | https://github.com/quartiq/lasersdk-artiq              |
+| TOPTICA lasers                  | ``toptica-lasersdk-artiq``        | ``toptica-lasersdk-artiq``       | Not available                                                    | https://github.com/quartiq/lasersdk-artiq              |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| HighFinesse wavemeters          | ``highfinesse-net``               | ``highfinesse-net``              | `HTML <https://nixbld.m-labs.hk/job/artiq/full/highfinesse-net-manual-html/latest/download/1>`_     | https://github.com/quartiq/highfinesse-net             |
+| HighFinesse wavemeters          | ``highfinesse-net``               | ``highfinesse-net``              | Not available                                                    | https://github.com/quartiq/highfinesse-net             |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+
-| InfluxDB database               | Not available                     | Not available                    | `HTML <https://gitlab.com/charlesbaynham/artiq_influx_generic>`_                                    | https://gitlab.com/charlesbaynham/artiq_influx_generic |
+| InfluxDB database               | Not available                     | Not available                    | `HTML <https://gitlab.com/charlesbaynham/artiq_influx_generic>`_ | https://gitlab.com/charlesbaynham/artiq_influx_generic |
-+---------------------------------+-----------------------------------+----------------------------------+-----------------------------------------------------------------------------------------------------+--------------------------------------------------------+
++---------------------------------+-----------------------------------+----------------------------------+------------------------------------------------------------------+--------------------------------------------------------+

flake.lock

@@ -2,6 +2,7 @@
   "nodes": {
     "artiq-comtools": {
       "inputs": {
+        "flake-utils": "flake-utils",
         "nixpkgs": [
           "nixpkgs"
         ],
@@ -10,11 +11,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1654007592,
+        "lastModified": 1717637438,
-        "narHash": "sha256-vaDFhE1ItjqtIcinC/6RAJGbj44pxxMUEeQUa3FtgEE=",
+        "narHash": "sha256-BXFidNm3Em8iChPGu1L0s2bY+f2yQ0VVid4MuOoTehw=",
         "owner": "m-labs",
         "repo": "artiq-comtools",
-        "rev": "cb73281154656ee8f74db1866859e31bf42755cd",
+        "rev": "78d27026efe76a13f7b4698a554f55811369ec4d",
         "type": "github"
       },
       "original": {
@@ -23,14 +24,32 @@
         "type": "github"
       }
     },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1710146030,
+        "narHash": "sha256-SZ5L6eA7HJ/nmkzGG7/ISclqe6oZdOZTNoesiInkXPQ=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "b1d9ab70662946ef0850d488da1c9019f3a9752a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
     "mozilla-overlay": {
       "flake": false,
       "locked": {
-        "lastModified": 1657214286,
+        "lastModified": 1704373101,
-        "narHash": "sha256-rO/4oymKXU09wG2bcTt4uthPCp1XsBZjxuCJo3yVXNs=",
+        "narHash": "sha256-+gi59LRWRQmwROrmE1E2b3mtocwueCQqZ60CwLG+gbg=",
         "owner": "mozilla",
         "repo": "nixpkgs-mozilla",
-        "rev": "0508a66e28a5792fdfb126bbf4dec1029c2509e0",
+        "rev": "9b11a87c0cc54e308fa83aac5b4ee1816d5418a2",
         "type": "github"
       },
       "original": {
@@ -41,11 +60,11 @@
     },
     "nixpkgs": {
       "locked": {
-        "lastModified": 1657123678,
+        "lastModified": 1685573264,
-        "narHash": "sha256-cowVkScfUPlbBXUp08MeVk/wgm9E1zp1uC+9no2hZYw=",
+        "narHash": "sha256-Zffu01pONhs/pqH07cjlF10NnMDLok8ix5Uk4rhOnZQ=",
         "owner": "NixOS",
         "repo": "nixpkgs",
-        "rev": "316b762afdb9e142a803f29c49a88b4a47db80ee",
+        "rev": "380be19fbd2d9079f677978361792cb25e8a3635",
         "type": "github"
       },
       "original": {
@@ -73,11 +92,11 @@
         ]
       },
       "locked": {
-        "lastModified": 1654830914,
+        "lastModified": 1717637367,
-        "narHash": "sha256-tratXcWu6Dgzd0Qd9V6EMjuNlE9qDN1pKFhP+Gt0b64=",
+        "narHash": "sha256-4mSm9wl5EMgzzrW6w86IDUevkEOT99FESHGcxcyQbD0=",
         "owner": "m-labs",
         "repo": "sipyco",
-        "rev": "58b0935f7ae47659abee5b5792fa594153328d6f",
+        "rev": "02b96ec2473a3c3d3c980899de2564ddce949dab",
         "type": "github"
       },
       "original": {
@@ -89,11 +108,11 @@
     "src-migen": {
       "flake": false,
       "locked": {
-        "lastModified": 1656649178,
+        "lastModified": 1715484909,
-        "narHash": "sha256-A91sZRrprEuPOtIUVxm6wX5djac9wnNZQ4+cU1nvJPc=",
+        "narHash": "sha256-4DCHBUBfc/VA+7NW2Hr0+JP4NnKPru2uVJyZjCCk0Ws=",
         "owner": "m-labs",
         "repo": "migen",
-        "rev": "0fb91737090fe45fd764ea3f71257a4c53c7a4ae",
+        "rev": "4790bb577681a8c3a8d226bc196a4e5deb39e4df",
         "type": "github"
       },
       "original": {
@@ -105,11 +124,11 @@
     "src-misoc": {
       "flake": false,
       "locked": {
-        "lastModified": 1649324486,
+        "lastModified": 1715647536,
-        "narHash": "sha256-Mw/fQS3lHFvCm7L1k63joRkz5uyijQfywcOq+X2+o2s=",
+        "narHash": "sha256-q+USDcaKHABwW56Jzq8u94iGPWlyLXMyVt0j/Gyg+IE=",
-        "ref": "master",
+        "ref": "refs/heads/master",
-        "rev": "f1dc58d2b8c222ba41c25cee4301626625f46e43",
+        "rev": "fea9de558c730bc394a5936094ae95bb9d6fa726",
-        "revCount": 2420,
+        "revCount": 2455,
         "submodules": true,
         "type": "git",
         "url": "https://github.com/m-labs/misoc.git"
@@ -135,6 +154,21 @@
         "repo": "pythonparser",
         "type": "github"
       }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
     }
   },
   "root": "root",

flake.nix

@@ -21,7 +21,7 @@
       artiqVersionMajor = 7;
       artiqVersionMinor = self.sourceInfo.revCount or 0;
       artiqVersionId = self.sourceInfo.shortRev or "unknown";
-      artiqVersion = (builtins.toString artiqVersionMajor) + "." + (builtins.toString artiqVersionMinor) + "." + artiqVersionId + ".beta";
+      artiqVersion = (builtins.toString artiqVersionMajor) + "." + (builtins.toString artiqVersionMinor) + "." + artiqVersionId;
       artiqRev = self.sourceInfo.rev or "unknown";
 
       rustManifest = pkgs.fetchurl {
@@ -112,28 +112,6 @@
         '';
       };
 
-      llvmlite-new = pkgs.python3Packages.buildPythonPackage rec {
-        pname = "llvmlite";
-        version = "0.38.0";
-        src = pkgs.python3Packages.fetchPypi {
-          inherit pname;
-          version = "0.38.0";
-          sha256 = "qZ0WbM87EW87ntI7m3C6JBVkCpyXjzqqE/rUnFj0llw=";
-        };
-        nativeBuildInputs = [ pkgs.llvm_11 ];
-        # Disable static linking
-        # https://github.com/numba/llvmlite/issues/93
-        postPatch = ''
-          substituteInPlace ffi/Makefile.linux --replace "-static-libstdc++" ""
-          substituteInPlace llvmlite/tests/test_binding.py --replace "test_linux" "nope"
-        '';
-        # Set directory containing llvm-config binary
-        preConfigure = ''
-          export LLVM_CONFIG=${pkgs.llvm_11.dev}/bin/llvm-config
-        '';
-        doCheck = false;  # FIXME
-      };
-
       artiq = pkgs.python3Packages.buildPythonPackage rec {
         pname = "artiq";
         version = artiqVersion;
@@ -147,8 +125,8 @@
 
         nativeBuildInputs = [ pkgs.qt5.wrapQtAppsHook ];
         # keep llvm_x and lld_x in sync with llvmlite
-        propagatedBuildInputs = [ pkgs.llvm_11 pkgs.lld_11 llvmlite-new sipyco.packages.x86_64-linux.sipyco pythonparser artiq-comtools.packages.x86_64-linux.artiq-comtools ]
+        propagatedBuildInputs = [ pkgs.llvm_11 pkgs.lld_11 sipyco.packages.x86_64-linux.sipyco pythonparser artiq-comtools.packages.x86_64-linux.artiq-comtools ]
-          ++ (with pkgs.python3Packages; [ pyqtgraph pygit2 numpy dateutil scipy prettytable pyserial python-Levenshtein h5py pyqt5 qasync tqdm ]);
+          ++ (with pkgs.python3Packages; [ llvmlite pyqtgraph pygit2 numpy dateutil scipy prettytable pyserial python-Levenshtein h5py pyqt5 qasync tqdm ]);
 
         dontWrapQtApps = true;
         postFixup = ''
@@ -178,6 +156,7 @@
       migen = pkgs.python3Packages.buildPythonPackage rec {
         name = "migen";
         src = src-migen;
+        format = "pyproject";
         propagatedBuildInputs = [ pkgs.python3Packages.colorama ];
       };
 
@@ -224,20 +203,6 @@
         propagatedBuildInputs = with pkgs.python3Packages; [ pyserial prettytable msgpack migen ];
       };
 
-      cargo-xbuild = rustPlatform.buildRustPackage rec {
-        pname = "cargo-xbuild";
-        version = "0.6.5";
-
-        src = pkgs.fetchFromGitHub {
-          owner = "rust-osdev";
-          repo = pname;
-          rev = "v${version}";
-          sha256 = "18djvygq9v8rmfchvi2hfj0i6fhn36m716vqndqnj56fiqviwxvf";
-        };
-
-        cargoSha256 = "13sj9j9kl6js75h9xq0yidxy63vixxm9q3f8jil6ymarml5wkhx8";
-      };
-
       vivadoEnv = pkgs.buildFHSUserEnv {
         name = "vivado-env";
         targetPkgs = vivadoDeps;
@@ -246,7 +211,7 @@
       vivado = pkgs.buildFHSUserEnv {
         name = "vivado";
         targetPkgs = vivadoDeps;
-        profile = "set -e; source /opt/Xilinx/Vivado/2021.2/settings64.sh";
+        profile = "set -e; source /opt/Xilinx/Vivado/2022.2/settings64.sh";
         runScript = "vivado";
       };
 
@@ -269,7 +234,6 @@
             pkgs.lld_11
             vivado
             rustPlatform.cargoSetupHook
-            cargo-xbuild
           ];
           buildPhase = 
             ''
@@ -425,7 +389,6 @@
           (pkgs.python3.withPackages(ps: with packages.x86_64-linux; [ migen misoc jesd204b artiq ps.paramiko ps.jsonschema microscope ]))
           rustPlatform.rust.rustc
           rustPlatform.rust.cargo
-          cargo-xbuild
           pkgs.llvmPackages_11.clang-unwrapped
           pkgs.llvm_11
           pkgs.lld_11
@@ -442,6 +405,8 @@
         ];
         shellHook = ''
           export LIBARTIQ_SUPPORT=`libartiq-support`
+	  export QT_PLUGIN_PATH=${pkgs.qt5.qtbase}/${pkgs.qt5.qtbase.dev.qtPluginPrefix}
+          export QML2_IMPORT_PATH=${pkgs.qt5.qtbase}/${pkgs.qt5.qtbase.dev.qtQmlPrefix}
         '';
       };
 

versioneer.py

@@ -11,7 +11,7 @@ def get_rev():
 """
 
 def get_version():
-    return os.getenv("VERSIONEER_OVERRIDE", default="7.0.beta")
+    return os.getenv("VERSIONEER_OVERRIDE", default="7.0")
 
 def get_rev():
     return os.getenv("VERSIONEER_REV", default="unknown")