600a48ac61
dsp.fir: cleanup
2017-06-29 12:18:48 +02:00
dca662a743
dsp.fir: pipeline final systolic adder
2017-06-29 11:33:19 +02:00
32a33500c8
dsp.fir: actively cull zero delays
2017-06-29 11:24:56 +02:00
f520d4a768
rtio: undo _RelaxedAsyncResetSynchronizer
2017-06-28 22:08:15 +02:00
3cbbcdfe96
sawg: don't enable_replace for Config
...
closes #762
2017-06-28 20:31:40 +02:00
f2632e0fd1
sawg: adapt latency to fir changes
...
closes #748
2017-06-28 20:12:30 +02:00
e7db2c6578
dsp.accu: reset_less outputs
2017-06-28 20:04:58 +02:00
6bb994228f
dsp.fir: drop x shift
2017-06-28 19:55:15 +02:00
01847271c5
rtio: use reset_less signal for reset fanout
2017-06-28 19:43:55 +02:00
b9859cc0c3
dsp.fir: remove old/wrong comment
2017-06-28 19:21:57 +02:00
55b5b87490
fir: simplify latency compensation
...
Don't try to tweak out the last bit of latency by feeding the HBF input
early. Instead feed it late so the interpolated samples are early and
the latency is an even multiple of the super-sample cycle.
2017-06-28 19:13:43 +02:00
d1e5dd334f
sawg: use pipeline reset
2017-06-28 19:09:39 +02:00
6418205906
dsp.fir: use pipelin-reset
2017-06-28 19:09:21 +02:00
whitequark
6a49c114c8
runtime: update smoltcp.
2017-06-28 00:27:22 +00:00
whitequark
370f22541c
runtime: update smoltcp.
2017-06-27 21:06:45 +00:00
whitequark
f36f00a83d
artiq_devtool: do not chop up the TCP stream into 1024 byte chunks.
...
This makes the smoltcp behavior quite different than without
the TCP forwarding (and can mask smoltcp issues).
2017-06-26 08:39:16 +00:00
whitequark
282f4256e0
artiq_pcap: atomically replace pcap file.
...
Otherwise this segfaults Wireshark (?!).
2017-06-26 03:22:14 +00:00
whitequark
d6f4f1f3bc
artiq_devtool, artiq_pcap: better option naming.
2017-06-26 00:00:05 +00:00
whitequark
6061393bd0
tools: lazily import paramiko.
2017-06-25 07:17:03 +00:00
whitequark
816ec6c52f
artiq_pcap: implement.
2017-06-25 07:04:29 +00:00
whitequark
69fa9b38e0
test: actually run test_embedding.AsyncTest.
2017-06-25 05:28:32 +00:00
whitequark
31b52ff1b3
coredevice: do not desync kernel TCP stream on RPCReturnValueError.
...
And propagate the error upwards instead of trying to squeeze it
through the core device in futility.
2017-06-25 04:47:32 +00:00
whitequark
fdb24ef139
coredevice: truncate overlong exception messages.
...
If we have a really long one (megabytes) then this may exhaust
the heap of the core device and crash it.
2017-06-25 04:39:08 +00:00
whitequark
1fa8be3835
artiq_devtool: don't loop forever if core device dies.
2017-06-25 04:18:45 +00:00
whitequark
f17a6616b2
runtime: ensure management interface buffer can hold log buffer.
...
Otherwise we get weird edge cases where the network stack could try
to append to log buffer while management interface is holding
the log buffer and trying to push it out, and it's just no good.
The serialized log buffer at its maximum length is slightly longer
than 32 KiB, so we just allocate the largest possible TCP buffer
to the management interface to keep it simple.
2017-06-24 17:09:28 +00:00
whitequark
d0f72632e1
language: export TBytes and TByteArray.
2017-06-24 17:03:35 +00:00
whitequark
12357d884e
runtime: update smoltcp.
2017-06-24 16:55:59 +00:00
07f5e99140
dsp/sat_add: works after previous changes
2017-06-22 18:24:22 +02:00
f78d5a87e9
dsp/test: skip and fix sat_add
2017-06-22 18:01:31 +02:00
47928a2c0d
sawg: disable limiter
...
temporary workaround to permit testing other aspects
2017-06-22 17:31:04 +02:00
cd2ac53bc5
dsp/sat_add: make width mandatory
2017-06-22 17:28:39 +02:00
9b940aa876
dsp/sat_add: spell out logic more
2017-06-22 16:55:13 +02:00
d0cf0f2b87
sawg/limiter: make signed signals explicitly
2017-06-22 13:44:36 +02:00
53be34a25f
sawg: clear phase accu in reset
2017-06-22 13:27:49 +02:00
694f8d784c
dsp/tools: unittest sat_add
2017-06-22 11:29:56 +02:00
bd1438d28e
sawg: wrap limits init values
2017-06-22 10:26:29 +02:00
cccd01e81e
sawg: cleanup sat_add logic
2017-06-22 10:26:29 +02:00
5f6e665158
test/sawg: patch delay_mu
2017-06-22 10:26:29 +02:00
570f2cc1ff
dsp/tools/SatAdd: fix reuse of clipped signal
2017-06-22 10:26:29 +02:00
4b3aad2563
sawg: clean up Config
...
* unify I and Q data limiters. there is no conceivable way why they
would be different.
* reorder clr bits to be like consistent
* move the sat add limiter to before the hbf again
2017-06-22 10:26:29 +02:00
f4c6879c76
sawg: special case Config RTIO address
2017-06-22 10:26:29 +02:00
ff0da2c9fc
sawg: stage code for y-data exchange on channels
2017-06-22 10:26:29 +02:00
b6569df02f
dsp/tools: clean up SatAddMixin logic
2017-06-22 10:26:29 +02:00
f369cb97f7
sawg/examples: add a bit more slack
2017-06-22 10:26:29 +02:00
05b57f5110
protocols: increase another asyncio line limit ( #671 )
2017-06-22 09:43:52 +08:00
c2cc29142d
drtio: remove misleading comment from device_db
2017-06-21 18:34:53 +08:00
6262969d46
test: relax test_dma_record_time
2017-06-21 18:33:58 +08:00
64ce85445c
drtio: add remote converter SPI example ( #740 )
2017-06-21 17:08:12 +08:00
74cf074538
drtio: remove sawg_3g from example targets, add converter SPI bus from FMC-EBZ at all times
2017-06-21 17:01:52 +08:00
66dee9d1ad
drtio: send/process I2C and SPI aux packets ( #740 )
2017-06-21 16:50:51 +08:00
f58f16ccd4
drtioaux: add default timeout
2017-06-21 16:23:11 +08:00
7675dd063b
drtioaux: add I2C and SPI packets ( #740 )
2017-06-21 14:07:16 +08:00
c74de6ae96
phaser: reintroduce test_ad9154_status
2017-06-20 00:49:57 +08:00
8c56a95fa2
spi: add default busno
2017-06-20 00:49:38 +08:00
39ddb66f0f
phaser: add AD9154 SPI access driver to example ddb
2017-06-20 00:49:21 +08:00
470bce6214
coredevice: add AD9154 SPI access driver
2017-06-20 00:48:50 +08:00
a6d06824e7
fix indentation
2017-06-20 00:12:11 +08:00
8f2d85fc5b
add back ad9154_reg.py
2017-06-19 23:45:32 +08:00
c86029bca2
i2c: expose restart as syscall, add structure for I2C-over-DRTIO
2017-06-19 23:44:51 +08:00
268b7d8aaf
typo
2017-06-19 15:42:10 +08:00
09d198c7a1
test: add test for exception on non-existent I2C bus
2017-06-19 15:32:09 +08:00
d08bd58dff
versioneer: cut git hashes consistently ( #753 )
2017-06-19 15:31:48 +08:00
6c6bb67618
libboard: fix compiler warning on not(has_i2c)
2017-06-19 14:57:15 +08:00
5d63489080
i2c,spi: add busno error detection
2017-06-19 14:27:30 +08:00
0d8067256b
rtio: refactor RelaxedAsyncResetSynchronizer
2017-06-18 14:37:08 +02:00
8399f8893d
add kernel access to non-realtime SPI buses ( #740 )
2017-06-18 12:45:07 +08:00
424b2bfbd8
rtio: describe rio and rio_phy domains a bit more
2017-06-17 12:21:07 +02:00
219dfd8984
rtio: add one register level for rio and rio_phy resets
...
* This should give Vivado some wiggle room during PnR.
* It needs three new clock domains which is ugly. But since
AsyncResetSynchronizer can only drive clock domains resets directly
there seems to be no other way to add one register level currently.
2017-06-17 12:17:48 +02:00
8fea361412
firmware: always use 8 characters to abbreviate git commit hashes
2017-06-17 14:43:50 +08:00
e19bfd4781
test_sawg_fe: add ref_multiplier to simulated core
2017-06-16 19:45:24 +02:00
b5772f478a
sawg: add channel reset ( closes #751 )
2017-06-16 19:31:57 +02:00
2a76034fbc
cri: add note about clearing of o_data
2017-06-16 19:06:00 +02:00
fecc42fd0c
sawg/phaser: expand documentation ( closes #750 )
2017-06-14 11:49:52 +02:00
858c1be381
sawg: expand documentation
2017-06-13 18:51:48 +02:00
3f37870e25
sawg: register pre-hbf adder
2017-06-13 18:15:44 +02:00
e229edd5d5
sawg: add register after hbf for timing
2017-06-12 23:08:27 +02:00
315338fca9
test/sawg: test HBF overshoot, fix sim patching
2017-06-12 20:35:47 +02:00
9a8a7b9102
sawg: handle clipping interpolator
...
* give 1 bit headroom to interpolator to handle overshoot
* fix Config limiter widths (NFC)
* move clipper to behind the HBF to correctly shield DUC
This leaves a factor of two headroom for the sum of the following
effects:
* HBF overshoot (~15 % of the step)
* A1/A2 DDS sum
While this is technically not sufficient and can still lead to
overflows, it is unlikely that one would trigger those. It would require
doing large amplitude A1, large amplitude A2 and additionally doing
amplitude/phase jumps that would overshoot the HBF. No sane person would
try that, right?
closes #743
2017-06-12 20:33:54 +02:00
1fb3995ffc
Revert "fir/ParallelHBFUpsampler: add headroom (gain=2)"
...
This reverts commit 6ac9d0c41e
.
Overshooting behavior must to be handled outside the FIR.
2017-06-12 20:07:25 +02:00
332bcc7f3b
fir: check widths
2017-06-12 20:07:23 +02:00
39a1dcbb3d
test/fir: look at overshoot behavior
2017-06-12 20:06:07 +02:00
6ac9d0c41e
fir/ParallelHBFUpsampler: add headroom (gain=2)
...
This addresses part of #743
2017-06-12 18:59:45 +02:00
566ff73dff
pdq: unify spi-PDQ and usb-PDQ protocols
2017-06-10 15:03:25 +02:00
6c54c0f834
sawg: update example
2017-06-10 11:52:48 +02:00
d8aee931ba
sawg: extend phase mode docs
2017-06-09 12:26:49 +02:00
whitequark
f7254dd3ce
compiler.validators.constness: take AugAssign into account.
2017-06-09 07:31:08 +00:00
whitequark
ad2ee714c2
compiler: do not permit iterating str values.
...
This currently breaks badly on UTF-8, and doesn't even return
a value of a correct type.
2017-06-09 07:29:31 +00:00
whitequark
4e7493843a
compiler: Constness is a validator, not analysis.
2017-06-09 07:29:31 +00:00
whitequark
5d841d08e9
compiler: do not permit mutation of bytes values ( #714 ).
2017-06-09 07:29:28 +00:00
whitequark
284382b1f5
compiler: add support for bytearray values in RPC ( #714 ).
2017-06-09 07:15:25 +00:00
whitequark
9ed4e9c1cd
compiler: add support for printing of bytearray values ( #714 ).
2017-06-09 07:15:25 +00:00
whitequark
e9564b15c8
compiler: add support for bytearray type ( #714 ).
2017-06-09 07:15:24 +00:00
whitequark
5b4fde30a8
compiler: unbreak subscripts for bytes values ( #714 ).
2017-06-09 07:10:48 +00:00
whitequark
66a683f583
compiler: add support for bytes values in RPC ( #714 ).
2017-06-09 07:10:48 +00:00
whitequark
778e7dc2ab
compiler: add support for concatenating bytes values ( #714 ).
2017-06-09 07:10:48 +00:00
whitequark
7b2da5294f
compiler: add support for printing of bytes values ( #714 ).
2017-06-09 07:10:48 +00:00
whitequark
dba4e1a28b
compiler: add support for bytes type and b"x" literals ( #714 ).
2017-06-09 07:10:48 +00:00
whitequark
d0e92067c3
ksupport: fix UB.
2017-06-09 06:18:20 +00:00
91ad2bc600
sawg: add note about disabled q-exchange
2017-06-07 09:13:01 +02:00
94273e9455
sawg: add non-mu methods for limiter
2017-06-07 09:12:36 +02:00