forked from M-Labs/artiq
1
0
Fork 0
Commit Graph

6265 Commits

Author SHA1 Message Date
ion c8935f7adf Sayma: bypass dividers where possible to minimize noise (nb this changes the output skew). 2018-06-12 12:56:04 +01:00
hartytp 7a0140ecb2
Sayma HMC830: update interface and register writes. (#1068)
* Break the HMC830 init into separate functions for general purpose (but, integer-N) init, setting dividers and checking lock

* Use 1.6mA ICP (which the loop filter was optimized for)

* Go through the data sheet carefully and set all registers to the correct value (e.g. ensure that all settings are correctly optimized for integer-N usage)

* Change divider values (now using 100MHz PFD, which should give lower noise in theory)
2018-06-12 12:37:17 +01:00
Robert Jördens a9d97101fc slave_fpga: add another check 2018-06-12 10:24:04 +02:00
Robert Jördens a143e238a8 savel_fpga: get rid of unneeded config 2018-06-12 10:24:04 +02:00
Robert Jördens 4912f53ab4 slave_fpga: board_misoc 2018-06-12 10:24:04 +02:00
hartytp cb6e44b23a Sayma: disable unused HMC7043 outputs. 2018-06-12 16:18:20 +08:00
Robert Jördens 0b086225a9 sawg: don't use Cat() for signed signals
c.f. #1039 #1040 #1022 #1058 #1044
2018-06-09 07:33:47 +00:00
Robert Jördens 5b73dd8604 sawg: accurate unittest rtio freq 2018-06-08 17:22:13 +02:00
Robert Jördens 6a7983cf89 conda: bump misoc
closes #1039
closes #1040
closes #1022
closes #1058
closes #1044
2018-06-08 17:11:01 +02:00
Robert Jördens 735e4e8561 pcu: spelling 2018-06-08 14:39:22 +00:00
Robert Jördens e5f6750171 sawg: cleanup double assign 2018-06-08 14:31:55 +00:00
Florent Kermarrec 53e9e475d0 serwb: transmit zeroes when nothing to transmit (for prbs), improve rx idle detection 2018-06-08 16:10:31 +02:00
Florent Kermarrec 7296a76f18 serwb: move common datapath code to datapath.py, simplify flow control 2018-06-08 12:37:08 +02:00
Florent Kermarrec 89797d08ed serwb: revert to 125MHz linerate (until we understand why 1gbps version breaks between builds) 2018-06-07 15:13:56 +02:00
Robert Jördens b4c2b148d1 sawg: don't use Mux for signed signals
migen#75
2018-06-06 15:51:14 +00:00
Sebastien Bourdeauducq 28f31323a3 conda: bump migen (again) 2018-06-06 23:35:26 +08:00
Sebastien Bourdeauducq f427d45144 conda: bump migen 2018-06-06 22:58:32 +08:00
Florent Kermarrec 009db5eda9 serwb: revert 1gbps linerate 2018-06-06 16:20:20 +02:00
Sebastien Bourdeauducq cae92f9b44 kasli: add Tsinghua variant 2018-06-06 19:03:45 +08:00
Robert Jördens 38971d130a comm_analyzer: fix data without any spi reads
closes #1050
2018-06-06 12:21:42 +02:00
Robert Jördens e21b7965b9 sayma_amc: change test patterns for 'without-sawg' 2018-06-06 08:02:52 +00:00
Sebastien Bourdeauducq 0d1b36c89b jesd204: bump 2018-06-06 11:47:54 +08:00
whitequark 38dac16041 compiler: don't crash when quoting builtin functions.
Fixes #1051.
2018-06-05 23:27:23 +00:00
Sebastien Bourdeauducq c28fe47164 conda: fix misoc version 2018-06-05 21:11:57 +08:00
Sebastien Bourdeauducq af88c4c93e clean up hmc7043 reset 2018-06-05 20:41:48 +08:00
Thomas Harty 988054f4bb Sayma: fix mistake in HMC7043 init code. 2018-06-05 19:22:04 +08:00
Thomas Harty bd1ac7cf3b Configure HMC7043 to give deterministic phase differences between its outputs 2018-06-05 19:22:04 +08:00
Thomas Harty ac5c4913ec Sayma RTM: hold hmc7043 in reset/mute state during init. 2018-06-05 19:22:04 +08:00
Florent Kermarrec b82158a2de firmware/ad9154: add stpl test 2018-06-05 02:08:57 +02:00
Chris Ballance 07d4145a35 correct documented siphaser VCO frequency [NFC] 2018-06-04 20:53:43 +08:00
Florent Kermarrec 925b47b077 firmware/ad9154: reset the dac between each configuration attempt 2018-06-04 14:03:26 +02:00
Robert Jördens bb87976d4f suservo: docstring fixes, revert parametrization of r_rtt 2018-06-04 07:27:17 +00:00
Robert Jördens 07a1425e51
SUservo EEM docs
add documentation to eem.SUServo. Change parameterization of t_rtt to include delays on Sampler, as this seems simpler and more robust to changing RTIO frequencies in the future.

c.f. #1046
2018-06-04 08:51:28 +02:00
whitequark d686d33093 runtime: print hex dumps around PC/EA in case of exception.
For #1026.
2018-06-01 21:17:59 +00:00
whitequark 985fd7377b artiq_rpctool: use inspect.formatargspec instead of a NIH formatter.
Fixes #1029.
2018-06-01 19:18:14 +00:00
whitequark f1a80f12f8 doc: note that coreanalyzer lacks SAWG support.
Closes #1035.
2018-06-01 18:47:37 +00:00
Robert Jördens 62deffa7d2 opticlock: fix core device name 2018-06-01 15:39:23 +00:00
Robert Jördens f50aef1a22 suservo: extract boilerplate
closes #1041
2018-06-01 15:37:07 +00:00
Robert Jördens 5de2d06568 ad53xx/zotino: do not clear power down on overtemp 2018-06-01 13:17:13 +00:00
Robert Jördens 2c344686d9 ad53xx/zotino: enable overtemp shutdown and readback control 2018-06-01 13:06:52 +00:00
Robert Jördens b56d37eb63 manual: fix table 2018-06-01 14:22:15 +02:00
Robert Jördens 87d3ac9d25 suservo: swap transfer function parametrization
The integrator is now parametrized through its gain and not the PI
corner frequency. The integrator gain limit is given in absolute gain
units and not relative to the proportional gain.

close #1033
2018-06-01 09:38:18 +00:00
Sebastien Bourdeauducq e408241233 sawg: work around compiler not accepting delay_mu(int32) 2018-06-01 15:42:37 +08:00
Sebastien Bourdeauducq f5d55c6902 sawg: add 1 coarse RTIO cycle between spline resets
This keeps all events in the same SED lane and limits the number of SED lanes required.

Closes #1038
2018-06-01 15:15:24 +08:00
Robert Jördens 22506e849f suservo: clarify timings
close #1027
2018-06-01 06:35:38 +00:00
Robert Jördens a42f774440 suservo: document offset range limits
close #1034
2018-05-31 16:55:44 +00:00
Robert Jördens 36dcea3edf suservo: refactor y_mu_to_full_scale as portable
close #1032
2018-05-31 16:44:14 +00:00
Robert Jördens e136709cac suservo: document gain state
close #1030
2018-05-31 16:36:53 +00:00
Robert Jördens 5dbdc5650c suservo: document set_config and get_status more
close #1028
2018-05-31 16:32:05 +00:00
Robert Jördens e1b0fcc24e suservo: add documentation on settings and setup
close #1015
2018-05-31 16:21:09 +00:00