7afb23e8be
runtime: demote dropped and malformed packets msgs to debug
2018-03-07 14:28:21 +01:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
74d1df3ff0
firmware: implement si5324 skew calibration
2018-03-07 10:57:30 +08:00
e6e5236ce2
firmware: fix si5324 select_recovered_clock
2018-03-07 10:57:30 +08:00
c2d2cc2d72
runtime: fix setup_si5324_as_synthesizer
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
257bef0d21
slave_fpga: print more info
2018-03-06 14:26:26 +01:00
a274af77d5
runtime: fix compilation without DRTIO
2018-03-05 00:43:42 +08:00
432e61bbb4
drtio: add kernel API to check for link status. Closes #941
2018-03-05 00:23:55 +08:00
928d5dc9b3
drtio: raise RTIOLinkError if operation fails due to link lost ( #942 )
2018-03-04 01:02:53 +08:00
ba74013e3e
runtime: add a missing overflow flag reset
2018-03-03 13:16:21 +08:00
1c57d27ae2
slave_fpga: use sayma_rtm magic
2018-03-01 18:32:19 +01:00
de63e657b8
kasli/si5324: lock to 100 MHz with highest available bandwidth
2018-03-01 14:49:53 +01:00
abd160d143
slave_fpga: check DONE before loading
2018-03-01 19:53:34 +08:00
a04a36ee36
firmware: move wait for write completion to read()
2018-03-01 11:37:33 +01:00
a6ae08d8b8
firmware/spi: work around cs_polarity semantics
...
The semantics differ between the RTIO and CSR interface.
2018-03-01 11:19:18 +01:00
6fbe0d8ed8
hmc830: be explicit about SPI mode selection
2018-03-01 11:19:18 +01:00
a7720d05cd
firmware, sayma: port converter_spi to spi2
...
* ksupport/nrt_bus
* port ad9154, hmc830, hmc7043
* port local_spi and drtio_spi
* port kernel_proto libdrtioaux, satman
* change sayma_rtm gateware over
* add spi2 NRTSPIMaster
* remove spi NRTSPIMaster
* change sayma device_db
* change HMC830 to open mode and explicitly sequence open mode
2018-03-01 11:19:18 +01:00
68278e225d
slave_fpga: check for INIT low
2018-03-01 17:28:01 +08:00
whitequark
14f6fa6699
firmware: fix a warning.
2018-03-01 01:25:55 +00:00
whitequark
d051cec0dd
firmware: remove useless module.
2018-03-01 01:22:52 +00:00
0c49201be7
firmware: add slave fpga serial load support
...
based on whitequark's work in f95fb27m-labs/artiq#813
2018-02-28 19:27:52 +01:00
cedecc3030
Revert "firmware: Sayma RTM FPGA bitstream loading prototype ( #813 )."
...
This reverts commit f95fb273f1
2018-02-28 18:43:56 +01:00
whitequark
f95fb273f1
firmware: Sayma RTM FPGA bitstream loading prototype ( #813 ).
2018-02-28 16:46:23 +00:00
96423882f2
fix 4d6619f3b
2018-02-22 15:27:54 +08:00
4d6619f3bc
satman: send ResetAck
2018-02-22 15:17:44 +08:00
Florent Kermarrec
5eda894db4
firmware/libboard/sdram: increase read_delays dead zone to 32 on KU
2018-02-21 19:36:37 +01:00
whitequark
96f697ec96
firmware: update compiler_builtins to unbreak __gtdf2.
...
Fixes #883 .
2018-02-21 15:21:48 +00:00
Florent Kermarrec
afc16a67b6
firmware/liboard/sdram.rs: iterate read multiple times in read_delays to avoid false positives
2018-02-21 14:15:35 +01:00
738654c783
drtio: support remote RTIO resets
2018-02-20 18:48:54 +08:00
ad2c9590d0
drtio: rewrite/fix reset and link bringup/teardown
2018-02-20 17:26:43 +08:00
83abdd283a
drtio: signal stable clock input to transceiver
2018-02-18 22:29:30 +08:00
c87636ed2b
si5324: fix cfb21ca
2018-02-18 11:38:20 +01:00
039dee4c8e
si5324: rename SI5324_FREE_RUNNING to SI5324_AS_SYNTHESIZER
...
The previous name was causing confusion with the FREE_RUN bit
that connects the crystal to CLKIN2.
2018-02-17 13:54:50 +08:00
cfb21ca126
si5324: fix usage of external CLKIN2 reference
2018-02-17 13:52:01 +08:00
fb8b36cd41
clean up ccc279b8
2018-02-17 12:10:46 +08:00
hartytp
ccc279b8da
rewrite HMC7043 init code without using ADI GUI outputs, working analog/digital delay
2018-02-17 12:07:11 +08:00
e41f49cc75
kasli: opticlock 125 MHz, mark external reference case broken
2018-02-16 17:23:15 +00:00
4d42df2a7c
kasli: set up Si5324 in standalone operation
2018-02-15 20:32:58 +08:00
c5ae81f452
satman: remove unused 62.5MHz Si5324 settings
2018-02-15 20:29:51 +08:00
d7387611c0
sayma: print RTM gateware version
2018-02-15 19:31:58 +08:00
whitequark
fe50018037
firmware: make network tracing runtime switchable.
2018-02-14 23:03:20 +00:00
df177bfd5b
use new misoc identifier
2018-02-13 20:38:48 +08:00
00f42f912b
rename 'RTM identifier' to 'RTM magic number'
...
Avoids confusion with the MiSoC identifier (containing the ARTIQ version).
2018-02-13 20:02:51 +08:00
Florent Kermarrec
e80b481032
firmware/libboard_artiq/hmc830_7043.rs: add template for sys_ref phase configuration for dac1/dac2 and fpga
2018-02-05 13:40:17 +01:00
Florent Kermarrec
e50bebb63d
firmware/liboard_artiq/ad9154.rs: add checks for jesd subclass 1 (verify that we receive the sysref and that phase error is within the specified window error threshold).
2018-02-05 13:39:30 +01:00
whitequark
807eb1155b
Update smoltcp.
...
Fixes #902 .
2018-01-30 03:29:08 +00:00
whitequark
d58393a1e5
runtime: build with -Cpanic=unwind.
...
This is required for backtraces to function. I'm not sure how it
turned out that master had -Cpanic=abort.
2018-01-26 23:01:24 +00:00
0d2f89db53
si5324: chip does not ack RST_REG write
2018-01-25 11:06:19 +08:00
cfffd9e13d
si5324: kasli support
2018-01-23 13:17:03 +08:00
