David Nadlinger
84b91ee8bd
master/scheduler: Document Deleter semantics [nfc]
...
From looking at the code, it wasn't obvious to me that this is
supposed to handle multiple calls to delete(). This is the case,
however, when for instance Scheduler.delete()ing a run, which
will then also be deleted again from AnalyzeStage.
2019-05-14 22:37:16 +01:00
hartytp
c2b4f0cfe3
sync_struct: catch ConnectionErrors in _receive_cr ( #1319 )
2019-05-10 12:53:51 +01:00
hartytp
bbcd1db025
sync_struct: replace ConnectionError subclasses with ConnectionError ( #1318 )
2019-05-10 12:48:12 +01:00
hartytp
30fe624fe5
sync_struct: flake8 [nfc] ( #1317 )
2019-05-10 12:42:06 +01:00
1a3d71760d
consolidate kasli example folders
2019-05-10 12:17:38 +08:00
f551491a84
remove sayma_masterdac example
2019-05-10 12:13:07 +08:00
72f7f8386f
remove old Kasli device databases ( #1289 )
2019-05-10 12:11:42 +08:00
86f462f40e
artiq_ddb_template: add edge counter support
2019-05-09 17:20:13 +08:00
fda3cb2482
kasli_generic: add edge counter support
2019-05-09 17:19:11 +08:00
ead9a42842
kasli: remove VLBAIMaster, VLBAISatellite variants
2019-05-08 15:58:25 +00:00
0c9b810501
kasli: remove PTB/PTB2/LUH/HUB variants
...
see sinara-systems and nix-scripts repos
2019-05-08 15:51:18 +00:00
1d2cc60e0d
kasli_generic: support ext_ref
2019-05-08 15:51:18 +00:00
948ea396c0
remove old buildbot kc705 device-db
2019-05-07 17:28:06 +08:00
3209197b0b
artiq_flash: do not needlessly look for artifacts
2019-05-07 17:20:13 +08:00
a1c97ec4dd
kasli_tester: support selection of TTL output to use as stimulus
2019-05-07 16:58:00 +08:00
4cc9bd33ce
test: only test_rpc_timing actually requires ARTIQ_LOW_LATENCY
2019-04-24 11:22:07 +08:00
bb39eedf5b
fix previous commit
2019-04-20 10:44:07 +08:00
93f4f31f45
devices.ctlmgr -> master.ctlmgr
2019-04-20 00:25:44 +08:00
56033b60a7
move thorlabs_tcube out of tree ( #887 )
2019-04-20 00:09:58 +08:00
eaec519ac8
move lda out of tree ( #887 )
2019-04-19 23:43:14 +08:00
d4781e9a8a
aqctl_corelog: add simulation mode
2019-04-19 23:42:37 +08:00
62e9b2d85e
move novatech409b out of tree ( #887 )
2019-04-19 21:56:16 +08:00
4c1fb0c2a1
move korad_ka3005p out of tree ( #887 )
2019-04-19 19:47:41 +08:00
73d6078883
use IP instead of hostname for kc705-1
...
Makes it easier to run tests in the Windows VM
2019-04-18 22:59:32 +08:00
David Nadlinger
4d215cf541
firmware: Add Si5324 config for 125 MHz ext ref
...
PLL divider settings as suggested by DSPLLsim 5.1.
2019-04-15 22:22:19 +01:00
David Nadlinger
dc7a642b26
test/lit: Make abs() integration test slightly more interesting
...
I had accidentally not included this local diff in the PR that was
merged as commit cdaf554736
2019-04-14 04:12:40 +01:00
David Nadlinger
cdaf554736
compiler: Implement abs() for scalars
...
GitHub: Fixes #1303 .
2019-04-13 13:39:16 +08:00
97b7ed557b
sayma_amc: do not use SFP0 (now used for Ethernet)
2019-04-12 18:47:18 +08:00
David Nadlinger
cd7a5a3683
firmware: Fix kernel RPC handling of zero-size values (e.g. empty arrays)
2019-03-31 18:33:44 +01:00
David Nadlinger
b4ddf4c86b
firmware: Make "unexpected reply from kernel CPU" log messages unique
...
This makes it easier to localize issues based on the log output.
2019-03-31 18:31:56 +01:00
David Nadlinger
236b30ac5f
coredevice: Add test for recent kernel RPC fixes
...
This covers all three (de)serialisation fixes.
2019-03-31 18:25:56 +01:00
David Nadlinger
88fd5c8440
compiler: Fix crash in escape analysis for assigning string literals
2019-03-31 17:10:27 +01:00
David Nadlinger
990e0b7dd9
compiler: Fix comparison of tuples of lists
2019-03-31 17:10:27 +01:00
David Nadlinger
baf102dbb2
compiler: Fix comparison of nested lists
2019-03-31 17:10:27 +01:00
David Nadlinger
8e225433a5
firmware: Fix kernel RPC strings size (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
b8ff627be9
firmware: Fix kernel RPC tuple size calculation (memory corruption)
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
fc95183e04
coredevice: Fix host-side serialization of (nested) lists
...
Test case to follow.
2019-03-31 17:10:27 +01:00
David Nadlinger
f9af058b96
compiler: Quote tuples as TTuple values
...
Previously, they would end up being TInstances,
rendering them useless.
2019-03-31 23:40:21 +08:00
3634cfac86
typo
2019-03-31 22:27:07 +08:00
4580f3dac8
test/lit: support overriding libartiq_support.so
2019-03-31 22:26:09 +08:00
4499ef1748
kasli: only add moninj core if there are probes to monitor
2019-03-24 14:09:52 +08:00
5d31cf2268
sayma_rtm2: si5324_clkout -> cdr_clk_clean
2019-03-23 13:48:36 +08:00
560849e693
sayma_amc: add DRTIO transceiver on rtm_amc_link for v2 hardware
2019-03-23 13:41:22 +08:00
bbb8c00518
sayma_amc: default to satellite variant
2019-03-23 13:37:55 +08:00
18fbe0b081
sayma_rtm_drtio: support v2 hardware
2019-03-23 13:31:28 +08:00
c7205ad82f
sayma_rtm: preliminary v2 support
2019-03-23 12:37:03 +08:00
d07c6fcfea
ad9910: handle unprogrammed EEPROM and numpy corner cases
2019-03-22 14:28:47 +08:00
7cdcaf0d00
tests: fix coredevice tests after implementing scheduler defaults
2019-03-22 07:27:55 +08:00
33b28f6e56
sayma_amc: add placeholder code to use DDMTD signals on v2 hardware
2019-03-21 17:37:22 +08:00
2ec5a58c59
sayma_amc: si5324_clkout -> cdr_clk_clean
2019-03-21 14:09:33 +08:00
af785b9a9c
artiq_compile: fix after adding scheduler defaults
...
Closes #1290
2019-03-21 09:56:19 +08:00
8d2c1be44f
artiq_flash: ignore rtm_gateware on Sayma for variant autodetection
2019-03-17 15:57:50 +08:00
c2622297bd
urukul: use board_data instead of user_data to store calibration in EEPROM
2019-03-15 17:57:35 +08:00
a01425bc9c
kasli_tester: do not attempt to synchronize AD9912 Urukul
2019-03-15 17:13:29 +08:00
fcf8828cb6
fix tests, artiq_run after implementing scheduler defaults ( #1290 )
2019-03-13 17:20:30 +01:00
5e7c83c9cf
artiq_ddb_template: enable Urukul synchronization from EEPROM
2019-03-13 15:42:51 +08:00
e504262b67
kasli_tester: calibrate Urukul synchronization and write to EEPROM
2019-03-13 15:36:05 +08:00
346299e7f8
kasli_tester: enable EEPROM for Urukul synchronization
2019-03-13 15:35:23 +08:00
04e0c23e78
ad9910: support reading synchronization values from EEPROM
2019-03-13 15:34:47 +08:00
852048dce4
artiq_ddb_template: create Urukul EEPROM device
2019-03-13 15:34:23 +08:00
964a349a19
add Kasli I2C driver
2019-03-13 15:33:50 +08:00
c56c3e5588
dashboard: add support for experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
8659c769cb
master/language: add methods to set experiment pipeline/priority/flush defaults
2019-03-12 10:54:15 +01:00
b2177eff81
kasli_tester: run test_i2c_switch
2019-03-11 21:06:28 +08:00
227c729f56
fix permissions
2019-03-11 20:43:28 +08:00
David Nadlinger
b3db3ea6fc
dashboard: Sort TTL moninj channels by name
...
With growing system complexity, the moninj channel index is
no longer a very intuitive ordering for typical end users.
2019-03-11 03:30:14 +01:00
David Nadlinger
5fd92a6175
gui: Fix crash when quickly opening/closing applets
...
Quickly closing/reopening applets (e.g. quickly clicking the checkbox
on an entire folder of applets) would previously lead to an occasional
KeyError on the self.dock_to_item access in on_dock_closed, as close()
would be invoked more than once.
The geometry/checked state handling can potentially be cleaned up
further, but at least this avoid the crash.
2019-03-10 20:57:10 +00:00
e47ba4b35e
kasli_generic: fix identifier string
2019-03-08 19:57:20 +08:00
b219f8b5c7
artiq_flash: autodetect variant
2019-03-08 19:47:24 +08:00
fc9d4c7bdc
artiq_flash: fix sayma master detection
2019-03-08 19:36:35 +08:00
25bcebd1f6
artiq_flash: not all boards are development boards
2019-03-08 19:35:20 +08:00
ed2d8dfa7a
artiq_flash: resolve openocd symbolic links
...
On NixOS, openocd may be a symlink in /run/current-system/sw/bin when installed system-wide.
2019-03-08 12:43:06 +08:00
0d05d4b813
artiq_client: python 3.7 compatibility
2019-02-26 17:09:38 +08:00
ec966de007
thorlabs_tcube: cleanup
2019-02-26 16:50:19 +08:00
62c7f75a9e
sayma_amc: support hardware revisions
2019-02-25 23:49:45 +08:00
d45249197c
siphaser: improve ultrascale clock routing
2019-02-25 23:00:01 +08:00
de3992bbdd
kasli: remove HUST variants (supported by kasli_generic)
2019-02-23 15:44:17 +08:00
791f830ef6
kasli_generic: support DRTIO
2019-02-23 15:41:05 +08:00
d39338d59f
artiq_ddb_template: fix --satellite
2019-02-23 15:27:18 +08:00
d79a6ee41c
artiq_ddb_template: fix pll_vco indentation
2019-02-22 23:50:30 +08:00
62985fbd29
binaries -> board-support
2019-02-22 23:18:01 +08:00
1c35c051a5
kasli: remove variants supported by generic builder
2019-02-22 23:08:49 +08:00
05b128469f
artiq_ddb_template: support setting Urukul pll_vco
2019-02-22 22:59:20 +08:00
cd60803f21
device_ddb_template: add Sampler, Zotino, Grabber and SFP LED support
2019-02-22 20:07:15 +08:00
269f0a4d6f
artiq_ddb_template: add Urukul support
2019-02-22 19:33:27 +08:00
8049c52d06
frontend: add artiq_ddb_template (WIP, TTL only)
2019-02-22 17:19:48 +08:00
8edc2318ab
style
2019-02-22 17:19:20 +08:00
aee8965897
ad9910: add ram conversion tooling and unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:59:52 +00:00
ec6588174b
ad9910: add ram operation unittests
...
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 15:14:32 +00:00
b57cad77ad
ad9910: make ram read work for short segments
...
also cleanup and style
Signed-off-by: Robert Jördens <rj@quartiq.de>
2019-02-21 14:47:58 +00:00
596d3e20d7
dashboard,browser: do not call get_user_config_dir() in argparse
...
This caused two problems when building the docs:
* the path printed in the docs depends on the machine where they are built
* it pollutes ~/.config, and also breaks Nix builds
2019-02-19 15:43:04 +08:00
40a0cf806d
support overriding versioneer
2019-02-17 14:49:52 +08:00
6ad2e13515
kasli: add generic builder (WIP)
2019-02-12 19:18:09 +08:00
2104a93f78
build_soc: allow overriding SoC class name
2019-02-12 18:33:52 +08:00
ff4e4f15ed
kasli: expose base SoC classes
2019-02-12 18:33:27 +08:00
whitequark
0a84dd38c1
Add missing test from d6eb2b02.
2019-02-10 07:25:53 +00:00
David Nadlinger
01c3000ef3
master: Print offending key on HDF5 dataset type error
...
This helps debugging the cause of TypeErrors arising from types
not handled by the HDF5 serializer, as the backtrace doesn't
otherwise include any useful information.
2019-02-09 20:50:38 +00:00
David Nadlinger
56b2e0c262
artiq_influxdb: Support append() in dataset _Mock
...
This went undetected as append mods were not actually in use
in any part of the codebase previously.
2019-02-09 20:50:38 +00:00
David Nadlinger
bf84226c7d
language: Support appending to datasets
2019-02-09 20:50:38 +00:00
David Nadlinger
820326960e
test: Add basic experiment dataset interface tests
2019-02-09 20:50:38 +00:00
