53a979e74d
rtio: cleanup resets
2018-09-20 10:58:38 +08:00
251d90c3d5
drtio: clear read request in satellite only after reply has been fully sent
...
Otherwise, chan_sel become invalid before the end of the packet, which
can cause the interconnect to invalidate i_timestamp and i_data which results
in corruption of the end of the packet.
2018-09-20 08:53:45 +08:00
69d060b639
drtio: fix satellite i_status handling
2018-09-19 20:57:21 +08:00
b86b6dcc09
drtio: add switching input test
2018-09-19 17:50:29 +08:00
08be176369
drtio: fix satellite i_status handling
2018-09-19 17:50:18 +08:00
3d965910f7
Revert "drtio: implement per-destination underflow margins"
...
This reverts commit 142c952e3d
2018-09-19 17:05:48 +08:00
142c952e3d
drtio: implement per-destination underflow margins
2018-09-19 17:03:15 +08:00
970d1bf147
drtio: add switching unittest
2018-09-18 15:27:52 +08:00
eda15a596c
drtio: add buffering to repeater
2018-09-18 15:27:25 +08:00
2b44786f73
drtio: add repeater input support
2018-09-17 23:45:27 +08:00
d38755feff
drtio: implement destination state checks on operations
2018-09-15 15:55:45 +08:00
cd61ee858c
kasli: fix satellite TSC instantiation
2018-09-15 14:06:54 +08:00
1ef39a98a7
drtio: implement per-destination buffer space
2018-09-13 16:16:32 +08:00
0befec7d26
drtio: improve repeater error reports
2018-09-12 20:54:01 +08:00
420e1cb1d0
cri: fix firmware routing table access
2018-09-12 18:08:16 +08:00
5bcd40ff59
cri: fix routing table depth
2018-09-12 17:30:55 +08:00
edf403b837
drtio: improve error reporting
2018-09-12 15:44:34 +08:00
95432a4ac1
drtio: remove old debugging features
2018-09-12 13:01:27 +08:00
41972d6773
drtio: rt_packet_satellite CRI fixes
2018-09-11 22:19:55 +08:00
051bafbfd9
drtio: ensure 2 cycles between frames on the link
...
This gives time for setting chan_sel before cmd on CRI.
2018-09-11 22:18:42 +08:00
251b9a2b0d
drtio: do not lock up master when satellite repeatedly fails to answer buffer space reqs
2018-09-11 22:17:57 +08:00
7ec45efdcf
kasli: add missing cri_con to Satellite
2018-09-10 20:16:09 +08:00
7ae44f3417
firmware: add routing table (WIP)
2018-09-09 21:49:28 +08:00
496d1b08fd
kasli: enable routing in Master
2018-09-09 21:48:12 +08:00
ec302747e0
kasli: add DRTIO repeaters
2018-09-09 16:27:39 +08:00
d5577ec0d0
cri: add routing table support
2018-09-09 16:26:48 +08:00
df61b85988
drtio: fix imports
2018-09-09 14:11:32 +08:00
312256a18d
grabber: fix frame size off-by-1
2018-09-07 16:55:43 +02:00
ec62eb9373
drtio: minor cleanup
2018-09-07 17:51:38 +08:00
4d73fb5bc9
grabber: only advance when DVAL
2018-09-06 11:01:08 +02:00
87e0384e97
drtio: separate aux controller
...
This helps with managing CSR groups and heterogeneous (satellite/repeaters) DRTIO cores.
2018-09-05 17:56:58 +08:00
92be9324df
add missing files
2018-09-05 16:09:02 +08:00
2884d595b3
drtio: add rt_controller_repeater
2018-09-05 16:08:40 +08:00
839f748a1d
drtio: add external TSC to repeater
2018-09-05 15:55:20 +08:00
5f20d79408
drtio: add timeout on satellite internal CRI buffer space request
2018-09-05 14:12:11 +08:00
1450e17a73
sayma: adapt to TSC and DRTIOSatellite changes
2018-09-05 12:10:41 +08:00
19ae9ac1b1
kc705: adapt to TSC changes
2018-09-05 12:07:28 +08:00
3d531cc923
kasli: adapt to TSC and DRTIOSatellite changes
2018-09-05 12:06:47 +08:00
4e4398afa6
analyzer: adapt to TSC changes
2018-09-05 12:06:20 +08:00
47eb37e212
VLBAI{Master,Slave}: align rtio channels with PTB
2018-09-04 10:39:45 +00:00
778f1de121
drtio: add TSC sync and missed command detection to rt_packet_repeater
2018-09-03 18:26:13 +08:00
hartytp
c55460f59f
suservo: fix doc typo
2018-09-03 11:48:40 +02:00
00fabee1ca
drtio: fix rt_packet_repeater timeout
2018-09-03 09:57:15 +08:00
f3fe818049
rtio: refactor TSC to allow sharing between cores
2018-09-03 09:48:12 +08:00
0fe2a6801e
drtio: forward destination with channel
2018-09-02 15:50:23 +08:00
6768dbab6c
drtio: add buffer space support to rt_packet_repeater
2018-09-02 14:38:37 +08:00
88b7529d09
drtio: share CDC
2018-09-02 14:37:29 +08:00
078c862618
drtio: add repeater (WIP, write only)
2018-09-01 21:07:55 +08:00
6057cb797c
drtio: reorganize tests
2018-08-31 16:28:33 +08:00
4f963e1e11
drtio: minor cleanup
2018-08-30 15:15:32 +08:00
ce6e390d5f
drtio: expose internal satellite CRI
2018-08-30 12:41:09 +08:00
e7dba34475
kasli/tester: fill all 12 EEM
2018-08-29 18:09:09 +00:00
fbf05db5ab
kasli: add VLBAI Master and Satellite
2018-08-29 17:53:48 +00:00
9584c30a1f
kasli: DRTIO Base: flexible rtio_clk_freq
2018-08-29 17:53:48 +00:00
eb9e9634df
siphaser: support 125 MHz rtio clk
...
keep the phase shift increment/decrement at 1/(56*8) rtio_clk
cycles
2018-08-29 17:53:48 +00:00
aa64e6c1c6
cri: add buffer space request protocol
2018-08-29 15:16:43 +08:00
9b6ea47b7a
kasli: use SFP LEDs to show DRTIO link status. Closes #1073
2018-08-19 13:04:41 +08:00
167e97efd2
sayma: support external RTM clocking
2018-08-17 22:57:54 +08:00
041dc0f64a
jesd204: update core to v0.10
...
Closes #727
Closes #1127
2018-08-17 22:50:07 +08:00
49f7a1610f
sayma: use GTP_CLK1 only for all variants ( #1080 )
2018-08-07 20:53:14 +08:00
e2a49ce368
drtio: support external IBUFDS_GTE3
2018-08-07 20:52:45 +08:00
9ce6233926
kasli: fix SYSU TTL directions
2018-08-07 19:29:28 +08:00
65f198bdee
kasli: use tester EEMs for DRTIO, add Urukul-Sayma sync example
2018-08-06 16:53:13 +08:00
b023865b42
sayma: instantiate dummy IBUFDS_GTE3 on unused but driven Si5324 clock pins
...
Solve same problem as e83ee3a0
2018-08-05 23:02:41 +08:00
e83ee3a07a
hmc7043: disable GTP_CLK1 when not in use
...
Termination and biasing are not active at the FPGA when IBUFDS_GTE3 is
not instantiated, and driving a clock then leads to overvoltage.
2018-08-03 10:03:52 +08:00
b38c685857
grabber: fix pix.stb
2018-07-24 11:32:32 +08:00
60a7e0e40d
grabber: use usual order of ROI coordinates in cfg addresses
2018-07-24 10:55:13 +08:00
7b75026391
grabber: add MultiReg to transfer ROI boundaries
2018-07-21 13:40:12 +08:00
4a4d0f8e51
grabber: fix missing variable rename
2018-07-21 13:39:46 +08:00
3638a966e1
kasli: add false path between RTIO and CL clocks
2018-07-21 13:26:13 +08:00
031de58d21
grabber: complete RTIO PHY, untested
2018-07-21 13:25:47 +08:00
e3ba4b9516
grabber: minor ROI engine cleanup, export count_len, cap count width to 31
2018-07-21 13:25:13 +08:00
25170a53e5
sayma: add back Urukul and Zotino
2018-07-18 10:27:54 +08:00
7fe76426fe
fmcdio_vhdci_eem: commit missing part of previous commit
2018-07-17 20:30:13 +08:00
4fdc20bb11
sayma: disable Urukul and Zotino for now
...
Ultrascale I/Os are being a pain as usual and the SPI core won't compile.
2018-07-17 20:08:21 +08:00
8335085fd6
fmcdio_vhdci_eem: fix cc pins
2018-07-17 19:50:34 +08:00
8f7c0c1646
fmcdio_vhdci_eem: fix iostandard
2018-07-17 19:40:34 +08:00
d724bd980c
sayma: add EEMs to Master
2018-07-17 18:58:23 +08:00
a0f2d8c2ea
gateware: add FMCDIO/EEM adapter definitions
2018-07-17 18:58:16 +08:00
3645a6424e
sayma: fix Master build
2018-07-17 18:56:33 +08:00
9b016dcd6d
eem: support specifying I/O standard
...
Xilinx FPGAs require different LVDS I/O standard names depending on I/O bank voltage.
2018-07-17 18:55:17 +08:00
3168b193e6
kc705: remove Zotino and Urukul
...
* use Kasli instead for using EEMs
* code required outdated VHDCI adapter 1.0
2018-07-17 17:48:57 +08:00
b2695d03ed
sayma: remove with_sawg from Master variant
2018-07-15 17:38:29 +08:00
b27fa8964b
add variant in identifier string
...
Also add without-sawg suffixes on Sayma.
Closes #1060
Closes #1059
2018-07-15 17:21:17 +08:00
b6c70b3cb0
eem: add Zotino monitoring. Closes #1095
2018-07-15 15:35:04 +08:00
8bcba82b65
grabber: reset *_good signals on end of frame
...
This reduces the amount of time the ROI engine produces invalid output after
being reconfigured.
2018-07-15 15:34:00 +08:00
82def6b535
grabber: add frequency counter
...
Cameras are a bit obscure about what they output, this can help with troubleshooting.
2018-07-12 17:05:18 +08:00
88fb9ce4d6
sayma_rtm: add hmc7043_gpo monitoring
2018-07-11 19:04:29 +08:00
29e5c95afa
sayma_rtm: minor cleanup
2018-07-11 19:02:59 +08:00
7f05e0c121
sayma_rtm: remove UART loopback
...
RTM power supply issues are fixed now, plus this will get in the way of satman support.
2018-07-11 19:00:18 +08:00
f8ceea20d0
grabber: add new ROI engine (untested)
2018-07-10 17:06:17 +08:00
d82beee540
grabber: make parser EOP a pulse
2018-07-10 17:04:07 +08:00
701c93d46c
grabber: add false path constraints
2018-07-10 14:28:23 +08:00
6a77032fa5
grabber: use BUFR/BUFIO
...
Less jitter and frees up BUFGs.
2018-07-10 13:30:38 +08:00
208dc7c218
grabber: prevent glitches in last_x/last_y cdc
2018-07-10 12:56:37 +08:00
c4e3c66265
grabber: add clock constraint
2018-07-10 12:37:32 +08:00
4f56710e4b
grabber: add parser, report detected frame size in core device log
2018-07-10 02:06:37 +08:00
509562ddbf
kasli: add WIPM target
2018-07-06 15:41:28 +08:00
540bdae99c
grabber: enable DIFF_TERM on inputs
2018-07-01 09:28:51 +08:00
729ce58f98
sayma: use GTP_CLK1 to clock DRTIO satellite transceiver
...
This is required to get constant skew between the DRTIO transceiver clock
(which then generates the RTIO clock) and the siphaser reference clock.
Both the Si5324 and the RTM clock tree have non-deterministic in-to-out skew
at 150MHz due to dividers.
2018-06-28 11:23:40 +08:00
a65721d649
sayma: put RTM clock tree into the siphaser loop
...
* Fixes one bug where siphaser was one Si5324 output and the rest of the
system was clocked by the other. With the Si5324 settings we have, skew
between the outputs is not controlled.
* Puts the coaxial cable between AMC and RTM into the siphaser loop.
2018-06-27 21:46:55 +08:00
c750de2955
sayma: add many-port pure DRTIO master
2018-06-25 18:21:22 +08:00
68530fde07
sayma: generate 100MHz from Si5324 on standalone and master targets
...
* Allow switching between DRTIO satellite and standalone without
touching the hardware.
* Allow operating standalone and master without an additional RF
signal generator.
2018-06-23 10:44:38 +08:00
f87da95e57
jesd204: use jesd clock domain for sysref sampler
...
RTIO domain is still in reset during calibration.
2018-06-22 17:13:01 +08:00
76fc63bbf7
jesd204: use separate controls for reset and input buffer disable
2018-06-22 11:38:18 +08:00
d9955fee76
jesd204: make sure IOB FF is used to sample SYSREF at FPGA
2018-06-22 11:00:56 +08:00
60b22217ce
sayma: set DRTIO master HMC830_REF to 100MHz
2018-06-22 10:10:09 +08:00
e6d1726754
sayma: add RTIO log to DRTIO master
2018-06-22 00:05:22 +08:00
83428961ad
sayma: add SAWG and JESD to DRTIO master
2018-06-22 00:04:22 +08:00
c1db02a351
drtio/gth_ultrascale: disable IBUFDS_GTE3 until stable_clkin
...
Precaution against HMC7043 noise issues.
2018-06-21 22:56:07 +08:00
8b3c12e6eb
sayma: clock DRTIO master transceiver from HMC7043
2018-06-21 22:34:44 +08:00
de7d64d482
sayma: clock JESD204 from GTP CLK2
...
This frees up GTP CLK1, which is routable to the SFP quads, for DRTIO.
2018-06-21 22:33:53 +08:00
b28ff587c5
sayma: add sysref sampler to DRTIO master
2018-06-21 22:28:34 +08:00
e29536351d
drtio: resync SYSREF when TSC is loaded
2018-06-21 17:00:32 +08:00
45e8263208
hmc7043: do not configure phases during initial init
...
They are determined later on.
2018-06-21 15:54:42 +08:00
28fb0fd754
sayma: add SYSREF sampler gateware
2018-06-20 17:48:35 +08:00
9142a5ab8a
rtio: expose coarse timestamp in RTIO and DRTIO satellite cores
2018-06-20 17:39:54 +08:00
75b6cea52f
sayma: add SAWG to DRTIO satellite
2018-06-19 19:12:10 +08:00
433273dd95
sayma: support RTM FPGA, HMC830 and HMC7043 in DRTIO master and satellite
2018-06-19 14:33:48 +08:00
6403a0d5d1
sayma_amc: update without-sawg description
2018-06-19 13:52:05 +08:00
d29b3dd588
hmc830: compile-time configurable reference frequency
2018-06-19 13:47:32 +08:00
6f3ed81626
targets/sayma_rtm: fix description
2018-06-18 17:46:53 +08:00
32484a62de
sayma_amc: remove unused imports
2018-06-17 13:09:44 +02:00
53ab255c00
sayma_amc: enable slave fpga loading ( #813 )
2018-06-16 12:47:26 +02:00
1029ac870b
sayma_rtm: don't drive txen pins
...
pins disabled by config
necessary for using that pin as DIN (#813 )
2018-06-13 16:11:30 +00:00
68d16fc292
serwb: support single-ended signals
...
Low-speed PHY only.
2018-06-13 21:28:21 +08:00
a9a25f2605
sayma_rtm: drive ref_lo_clk_sel, and set clk muxes early
2018-06-12 20:00:12 +02:00
a143e238a8
savel_fpga: get rid of unneeded config
2018-06-12 10:24:04 +02:00
0b086225a9
sawg: don't use Cat() for signed signals
...
c.f. #1039 #1040 #1022 #1058 #1044
2018-06-09 07:33:47 +00:00
5b73dd8604
sawg: accurate unittest rtio freq
2018-06-08 17:22:13 +02:00
e5f6750171
sawg: cleanup double assign
2018-06-08 14:31:55 +00:00
Florent Kermarrec
53e9e475d0
serwb: transmit zeroes when nothing to transmit (for prbs), improve rx idle detection
2018-06-08 16:10:31 +02:00
Florent Kermarrec
7296a76f18
serwb: move common datapath code to datapath.py, simplify flow control
2018-06-08 12:37:08 +02:00
Florent Kermarrec
89797d08ed
serwb: revert to 125MHz linerate (until we understand why 1gbps version breaks between builds)
2018-06-07 15:13:56 +02:00
b4c2b148d1
sawg: don't use Mux for signed signals
...
migen#75
2018-06-06 15:51:14 +00:00
Florent Kermarrec
009db5eda9
serwb: revert 1gbps linerate
2018-06-06 16:20:20 +02:00
cae92f9b44
kasli: add Tsinghua variant
2018-06-06 19:03:45 +08:00
e21b7965b9
sayma_amc: change test patterns for 'without-sawg'
2018-06-06 08:02:52 +00:00
af88c4c93e
clean up hmc7043 reset
2018-06-05 20:41:48 +08:00
Thomas Harty
ac5c4913ec
Sayma RTM: hold hmc7043 in reset/mute state during init.
2018-06-05 19:22:04 +08:00
07d4145a35
correct documented siphaser VCO frequency [NFC]
2018-06-04 20:53:43 +08:00
bb87976d4f
suservo: docstring fixes, revert parametrization of r_rtt
2018-06-04 07:27:17 +00:00
07a1425e51
SUservo EEM docs
...
add documentation to eem.SUServo. Change parameterization of t_rtt to include delays on Sampler, as this seems simpler and more robust to changing RTIO frequencies in the future.
c.f. #1046
2018-06-04 08:51:28 +02:00
f50aef1a22
suservo: extract boilerplate
...
closes #1041
2018-06-01 15:37:07 +00:00
9b5a46dffd
suservo: fix restart counter assertion
...
c.f. #788
2018-05-31 15:56:11 +00:00
Paweł
44c7a028cb
Added second argument to DIO.add_STD in master and satellite variant of kasli (now builds properly)
2018-05-30 22:49:40 +08:00
ad099edf63
kasli: integrate grabber
2018-05-28 22:43:40 +08:00
563e434e15
eem: finalize grabber support
2018-05-28 22:43:06 +08:00
2612fd1e72
rtio: add grabber deserializer and WIP PHY encapsulation
2018-05-28 22:42:27 +08:00
Florent Kermarrec
e21f14c0b3
serwb/phy: typo (KUSSerdes --> KUSerdes)
2018-05-28 10:41:11 +02:00
b20a8c86b0
kasli: don't bother with grabber ttls for now
...
not used on target cameras
2018-05-28 07:31:00 +02:00
80c69da17e
eem: add Grabber IOs and CC
2018-05-28 11:16:23 +08:00
bb248970df
style
2018-05-28 10:40:05 +08:00
b09d07905c
kasli: add LUH/PTB/HUB variants
...
and refactor/simplify variant selection
2018-05-27 18:33:27 +00:00
Florent Kermarrec
bca2969957
sayma_rtm: add RTMScratch module to test remote Wishbone accesses
2018-05-24 16:53:10 +02:00
19efd8b13e
kasli: refactor EEM code
2018-05-24 18:41:54 +08:00
4e5fe672e7
kasli: add tester target
2018-05-21 17:43:39 +08:00
72aef5799e
kasli/ustc: use TTLOut
2018-05-18 22:55:28 +08:00
b10d3ee4b4
make RTIO clock switch optional and simplify
...
Kasli no longer has an internal RTIO clock.
Switching clocks dynamically is no longer supported.
2018-05-18 17:41:34 +08:00
8a988d0feb
kasli: remove leftover debug print
2018-05-18 17:25:23 +08:00
37bd0c2566
kasli: add USTC target
2018-05-18 16:15:07 +08:00
Florent Kermarrec
f77bcbebb5
serwb/test_serwb_core: fix
2018-05-16 08:34:53 +02:00
Florent Kermarrec
77fc5c599f
serwb/test: update
2018-05-15 23:52:58 +02:00
Florent Kermarrec
3873d09692
serwb: rewrite high-speed phys by splitting clocking/tx/rx, scrambling is now always enabled.
2018-05-15 23:52:41 +02:00
Florent Kermarrec
f8a9dd930b
serwb/genphy: add device parameter (not used here, but this way all the phys share the same parameters), scrambling is also now always enabled.
2018-05-15 23:51:14 +02:00
Florent Kermarrec
2c627cd061
serwb/scrambler: simplify and set scrambler input data to 0 when sink.stb == 0
2018-05-15 23:49:17 +02:00
Florent Kermarrec
c18a73d45f
sayma_amc/rtm: use new serwb low-speed phy
2018-05-15 16:40:50 +02:00
Florent Kermarrec
913d1e8e12
serwb: add generic low-speed phy (125Mhz linerate, same phy for ultrascale/7-series)
2018-05-15 16:39:39 +02:00
Florent Kermarrec
520aade8fe
serwb/scrambler: cleanup/fix potential bug
2018-05-15 16:30:52 +02:00
504d37b66b
suservo: add SI units functions and document
...
m-labs/artiq#788
2018-05-14 12:26:49 +00:00
d71e4e60a9
suservo: use addition for offset
2018-05-14 12:26:49 +00:00
27f975e7bb
kasli: eem DifferentialInputs need DIFF_TERM
...
cleanup some formatting on the way
2018-05-14 12:26:49 +00:00
2a47b934ea
suservo: remove adc return clock gating
2018-05-14 12:26:49 +00:00
74c0b4452b
suservo: clkout and sdo[b-d] are inverted
2018-05-14 12:26:49 +00:00
04240cdc08
suservo: sampler channels are reversed
2018-05-14 12:25:09 +00:00
3027951dd8
integrate new AD9914 driver
...
moninj, analyzer, docs, examples, tests.
2018-05-13 23:29:35 +08:00
whitequark
ee4c475cf3
gateware: fix Sayma satellite build.
...
RTIO clock multiplier was removed from Sayma in 32f22f4c
2018-05-13 13:10:39 +00:00
8c1390e557
kasli: use 62.5MHz clock for siphaser reference ( #999 )
2018-05-12 22:58:03 +08:00
2426fea3f2
siphaser: support external reference for the freerunning 150MHz
2018-05-12 22:57:11 +08:00
6796413a53
serwb: remove unnecessary shebang line
2018-05-12 22:49:44 +08:00
Florent Kermarrec
f5208ff2f3
serwb/core: reduce buffering, use buffered=True
2018-05-12 12:03:58 +02:00
Florent Kermarrec
fdc953e569
serwb/etherbone: recuce buffering
2018-05-12 12:03:11 +02:00
Florent Kermarrec
6e67e6d0b1
serwb: revert some changes (was breaking simulation)
2018-05-12 11:59:46 +02:00
Florent Kermarrec
0a6d4ccd85
serwb/phy: improve/cleanup init
2018-05-12 01:35:34 +02:00
Florent Kermarrec
b6ab59fb80
serwb/phy: increase timeout
2018-05-12 01:32:55 +02:00
Florent Kermarrec
e09dbc89bc
serwb: remove idelaye3 en_vtc (was not done correctly, we'll add direct software control)
2018-05-12 01:32:16 +02:00
Florent Kermarrec
cd4477864a
serwb: fix case when rtm fpga is not loaded, lvds input can be 0 or 1
2018-05-11 23:31:25 +02:00
2e3bf8602f
serwb: reduce buffering. Closes #997
2018-05-11 14:13:41 +08:00
6b811c1a8b
sayma: fix runtime/rtm gateware address conflict
2018-05-09 19:47:29 +08:00
f055bf88f6
suservo: add clip flags ( #992 )
2018-05-09 07:16:15 +00:00
Florent Kermarrec
60fd362d57
serwb: fix rx_comma detection
2018-05-07 23:54:35 +02:00
7d4a103a43
opticlock, suservo: set default kasli hw_rev
2018-05-07 09:07:18 +02:00
whitequark
b1d349cc1b
firmware: implement a sampling profiler.
...
Does not yet support constructing call graphs.
2018-05-05 00:44:40 +00:00
5f0cfadb30
rtio/sed: add unittest for sequence number rollover
2018-05-02 12:04:30 +08:00
4120105e3a
rtio/sed: fix output network cmp_wrap
2018-05-02 12:04:03 +08:00
bce8fa3ec5
rtio/sed: add replace unittest at the top level ( #978 )
2018-05-02 10:58:18 +08:00
83fb431cd0
rtio/sed: pass sequence numbers through the FIFOs. Closes #978
2018-05-02 10:57:57 +08:00
Florent Kermarrec
05955bfd79
sayma_rtm: use bufio for sys4x (needed since we are using a -1 speedgrade)
2018-05-01 22:16:35 +02:00
Florent Kermarrec
84e1f05559
sayma_rtm: make cd_sys4x clock domain reset_less
2018-05-01 16:11:26 +02:00
Florent Kermarrec
64c8eee28d
serwb/phy/master: fix slave ready detection by filtering possible glitches on rx data (seems to happen when RTM fpga is not loaded)
2018-04-30 23:59:56 +02:00
5a683ddd1f
Revert "kasli: force hw_rev for the different targets"
...
This reverts commit 17d7d7856a
2018-04-28 23:24:41 +02:00
17d7d7856a
kasli: force hw_rev for the different targets
2018-04-28 21:30:29 +02:00
5d3c76fd50
sayma_rtm: use bitstream opts in migen
2018-04-27 15:43:32 +00:00
5f00326c65
suservo: coeff mem write port READ_FIRST
2018-04-27 15:43:32 +00:00
307cd07b9d
suservo: lots of gateware/ runtime changes
...
tested/validated:
* servo enable/disable
* dds interface, timing, io_update, mask_nu
* channel control (en_out, en_iir, profile)
* profile configuration (coefficients, delays, offsets, channel)
* adc timings and waveforms measured
* asf state readback
* adc readback
individual changes below:
suservo: correct rtio readback
suservo: example, device_db [wip]
suservo: change rtio channel layout
suservo: mem ports in rio domain
suservo: sck clocked from rio_phy
suservo: cleanup, straighten out timing
suservo: dds cs polarity
suservo: simplify pipeline
suservo: drop unused eem names
suservo: decouple adc SR from IIR
suservo: expand coredevice layer
suservo: start the correct stage
suservo: actually load ctrl
suservo: refactor/tweak adc timing
suservo: implement cpld and dds init
2018-04-27 13:50:26 +02:00
Florent Kermarrec
8212e46f5e
sayma_amc: filter jesd refclk/sysref with jreset (hmc7043 can generate noise when unconfigured see sinara issue #541 )
2018-04-27 13:04:37 +02:00
f9b2c32739
suservo: add pgia spi channel
2018-04-25 17:14:25 +00:00
c83305065a
suservo: add servo/config/status register
2018-04-25 15:59:06 +00:00
105068ad90
suservo: fix restart timing
2018-04-25 15:19:49 +00:00
c304b6207a
suservo: drop adc idelays
2018-04-25 14:59:50 +00:00
b44d6517d1
suservo: use 125 MHz SDR ADC
...
* easier timing
* natural sampling on rising edge
* timing, signal robustness
* adjust the servo iteration timing
2018-04-25 14:32:23 +00:00
37c186a0fc
suservo: refactor, constrain
...
* remove DiffMixin, move pad layout handling to pads
* add input delay constraints, IDELAYs
2018-04-25 13:44:52 +00:00
d0258b9b2d
suservo: set input delays
2018-04-24 15:30:25 +00:00
fe75064c1e
suservo: cleanup rtio interface
2018-04-24 13:08:40 +00:00
3942c2d274
suservo: fix clkout cd drive
2018-04-24 10:18:32 +00:00
f74998a5e0
suservo: move arch logic to top, fix tests
2018-04-23 21:11:26 +00:00
4903eb074c
suservo: use BUFIO/BUFH for ADC
2018-04-23 18:30:19 +00:00
e36deab0a8
suservo/adc: try to help vivado extract srls
2018-04-23 18:30:19 +00:00
929ed4471b
kasli/SUServo: use suservo, implement urukul_qspi
...
m-labs/artiq#788
2018-04-23 18:30:18 +00:00
4c1e356f67
suservo: add pads rewiring layer for eems
2018-04-23 18:30:18 +00:00
99dd9c7a2a
suservo: fix rtio interface width
2018-04-23 18:30:18 +00:00
d5eea962ec
suservo: fix cnv_b diff
2018-04-23 18:30:12 +00:00
c8fd63754a
suservo: add unittests
...
m-labs/artiq#788
2018-04-23 18:25:59 +00:00
934c41b90a
gateware: add suservo
...
from
fe4b60b902m-labs/artiq#788
2018-04-23 18:24:59 +00:00
Florent Kermarrec
439d2bf2bc
sayma/serwb: adapt, full reset of rtm on link reset
2018-04-17 19:24:03 +02:00
Florent Kermarrec
8edf4541d6
serwb: adapt test
2018-04-17 19:21:53 +02:00
Florent Kermarrec
20ccc9d82f
serwb/core/phy: move scrambler in phy, add link test, revert delay min/max checks
2018-04-17 19:21:21 +02:00
Florent Kermarrec
ebfac36223
serwb/scrambler: dynamic enable/disable
2018-04-17 19:20:06 +02:00
Florent Kermarrec
816a6f2ec7
serwb/phys: remove phy_width (revert linerate to 1Gbps)
2018-04-17 19:19:18 +02:00
eac447278f
kasli: add MITLL variant
2018-04-17 19:00:11 +08:00
756e120c27
kasli/sysu: add comments
2018-04-17 18:46:55 +08:00
Florent Kermarrec
1acd7ea1db
sayma/serwb: re-enable scrambling
2018-04-17 00:49:36 +02:00
Florent Kermarrec
ca01c8f1cb
sayma: reduce serwb linerate to 500Mbps
2018-04-16 23:19:15 +02:00
Florent Kermarrec
825a2158ba
serwb: add phy_width parameter to allow reducing linerate to 500Mbps or 250Mbps
2018-04-16 23:19:14 +02:00
Florent Kermarrec
bb90fb7d59
sayma/serwb: remove scrambling (does not seems to work on sayma for now...)
2018-04-07 15:57:57 +02:00
Florent Kermarrec
6aa8e2c433
serwb/test: replace valid/ready with stb/ack
2018-04-07 15:55:57 +02:00
Florent Kermarrec
73dbc0b6b6
serwb/test: adapt to new version
2018-04-07 15:09:29 +02:00
Florent Kermarrec
e15f8aa903
sayma/serwb: enable scrambling
2018-04-07 14:52:37 +02:00
Florent Kermarrec
9d0e8c27ff
serwb/scrambler: add flow control
2018-04-07 14:51:17 +02:00
Florent Kermarrec
2f8bd022f7
sayma_rtm: remove sys0p2x clock
2018-04-07 03:10:34 +02:00
Florent Kermarrec
1fd96eb0fd
serwb: replace valid/ready with stb/ack
2018-04-07 03:06:19 +02:00
Florent Kermarrec
c8a08375f8
serwb: replace valid/ready with stb/ack
2018-04-07 03:03:44 +02:00
Florent Kermarrec
73b727cade
serwb: new version using only sys/sys4x clocks domains, scrambling deactivated.
2018-04-07 02:59:14 +02:00
Florent Kermarrec
dd21c07b85
targets/sayma_rtm: fix serwb 2 ...
2018-04-03 18:59:05 +02:00
Florent Kermarrec
7488703f23
targets/sayma_rtm: fix serwb
2018-04-03 18:57:00 +02:00
Florent Kermarrec
aef0153a8f
targets/sayma: adapt to new serwb clocking
2018-04-03 18:53:39 +02:00
Florent Kermarrec
3248caa184
gateware/serwb: move all clocking outside of serwb, use existing sys/sys4x clocks
2018-04-03 18:48:08 +02:00
f0771765c1
rtio: move CRI write comment to more appropriate location
2018-03-29 23:55:00 +08:00
493d2a653f
siphaser: add false path between sys_clk and mmcm_freerun_output
2018-03-29 10:55:41 +08:00
4229c045f4
kasli: fix DRTIO master clock constraint
2018-03-29 10:20:31 +08:00
3d89ba2e11
sayma: remove debug leftover
2018-03-29 10:20:17 +08:00
605292535c
kasli: ignore OSERDESE2->ISERDESE2 timing path on DRTIO targets as well
2018-03-29 10:12:02 +08:00
whitequark
bab6723ff2
Revert "gateware: don't run tests if there is no migen."
...
This reverts commit 4804cfef9b
2018-03-26 03:33:52 +00:00
whitequark
4804cfef9b
gateware: don't run tests if there is no migen.
...
This allows us to skip testing gateware on Windows.
2018-03-26 03:26:34 +00:00
3a0dfb7fdc
ad53xx: port monitor, moninj dashboard, kc705 target
2018-03-24 16:04:02 +01:00
1553fc8c7d
sed: reset valid in output sorter
2018-03-23 11:11:11 +00:00
770b0a7b79
novogorny: conv -> cnv
...
* parity with sampler
* also add novogorny device to opticlock
2018-03-21 18:38:42 +00:00
1afce8c613
kasli: simplify single eem pin formatting
2018-03-21 13:08:42 +01:00
d48b8f3086
kasli: fix sampler sdr/cnv pins
2018-03-21 09:28:00 +00:00
1fb5907362
kasli: add SUServo variant (Sampler-Urukul Servo)
2018-03-21 08:53:26 +00:00
f74d5772f4
sampler: add wide eem definition
2018-03-21 08:53:26 +00:00
32f22f4c9c
sayma: disable SERDES TTL entirely
...
Timing closure becomes very random, even at 4X.
2018-03-21 13:03:48 +08:00
f8c2d54e75
ttl_serdes_ultrascale: configurable SERDES ratio. Also try X4 on Sayma
2018-03-21 13:01:38 +08:00
9c2d343052
sayma: use SERDES RTIO TTL
...
This is not enabled on the standalone design as it breaks timing.
2018-03-21 10:53:52 +08:00
c8020f6bbd
ttl_serdes_generic: fix/upgrade test
2018-03-20 16:46:57 +08:00
a5825184b7
add ttl_serdes_ultrascale (untested)
2018-03-20 16:07:23 +08:00
fad066f1aa
ttl_serdes_7series: cleanup indentation
...
Inconsistent with other code and confuses text editors.
2018-03-20 15:50:04 +08:00
Thomas Harty
37d431039d
Fix typos.
...
Reduce ififo depth to 4 for Zotino.
2018-03-19 09:42:18 +00:00
Thomas Harty
c4fa44bc62
Add Zotino and Sampler functions to Kasli. Add Zotino to Kasli EEM 7 on OptiClock.
2018-03-18 00:25:43 +00:00
a315ecd10b
rtio/ttl_serdes_7series: reset IOSERDES ( #958 )
2018-03-14 09:01:29 +08:00
2fdc180601
dsp/fir: outputs reset_less (pipelined)
2018-03-13 17:11:50 +00:00
2edf65f57b
drtio: fix satellite minimum_coarse_timestamp clock domain ( #947 )
2018-03-13 00:20:57 +08:00
1d081ed6c2
drtio: print diagnostic info on satellite write underflow ( #947 )
2018-03-12 23:41:19 +08:00
Florent Kermarrec
eb6e59b44c
sayma_rtm: fix serwb timing constraints (was causing the gated clock warning)
2018-03-12 11:25:29 +01:00
6dfebd54dd
ttl_serdes_7series: use correct IBUFDS_INTERMDISABLE port names
2018-03-12 10:37:33 +08:00
fc3d97f1f7
drtio: remove spurious multichannel transceiver clock constraints
...
They used to cause (otherwise harmless) Vivado critical warnings.
2018-03-09 22:46:27 +08:00
caf7b14b55
kasli: generate fine RTIO clock in DRTIO targets, separate RTIO channel code
2018-03-09 22:36:16 +08:00
3fbcf5f303
drtio: remove TSC correction ( #40 )
2018-03-09 10:36:17 +08:00
e38187c760
drtio: increase default underflow margin. Closes #947
2018-03-09 00:49:24 +08:00
8bd15d36c4
drtio: fix error CSR edge detection ( #947 )
2018-03-08 16:28:25 +08:00
82831a85b6
kasli/opticlock: add eem6 phys
2018-03-07 21:32:59 +01:00
3a6566f949
rtio: judicious spray with reset_less=True
...
Hoping to reduce rst routing difficulty and easier RTIO timing closure.
2018-03-07 14:57:18 +00:00
b0282fa855
spi2: reset configuration in rio_phy
2018-03-07 14:42:11 +00:00
4af7600b2d
Revert "LaneDistributor: try equivalent spread logic"
...
This reverts commit 8b70db5f17
2018-03-07 11:34:51 +00:00
a6d1b030c1
RTIO: use TS counter in the correct CD
...
artiq/m-labs#938
2018-03-07 11:34:42 +00:00
8b70db5f17
LaneDistributor: try equivalent spread logic
2018-03-07 11:34:42 +00:00
2cbd597416
LaneDistributor: style and signal consolidation [NFC]
2018-03-07 11:34:42 +00:00
916197c4d7
siphaser: cleanup
2018-03-07 11:15:44 +08:00
f7aba6b570
siphaser: fix phase_shift_done CSR
2018-03-07 10:57:30 +08:00
acfd9db185
siphaser: minor cleanup
2018-03-07 10:57:30 +08:00
7d98864b31
sayma: enable siphaser
2018-03-07 10:57:30 +08:00
a6e29462a8
sayma: enable multilink DRTIO
2018-03-07 10:57:30 +08:00
c34d00cbc9
drtio: implement Si5324 phaser gateware and partial firmware support
2018-03-07 10:57:30 +08:00
994ceca9ff
sayma_amc: disable slave fpga gateware loading
2018-03-06 17:27:43 +01:00
62af7fe2ac
Revert "kasli/opticlock: use plain ttls for channels 8-23"
...
This reverts commit bd5c222569eb68d624a5ac1e9f2542f6ee553f83.
No decrease in power consumption or improvement in timing.
2018-03-06 14:27:19 +01:00
fd3cdce59a
kasli/opticlock: use plain ttls for channels 8-23
2018-03-06 14:27:19 +01:00
50298a6104
ttl_serdes_7series: suppress diff_term in outputs
2018-03-06 14:27:19 +01:00
e356150ac4
ttl_simple: support differential io
2018-03-06 14:27:19 +01:00
956098c213
kasli: add second urukul, make clk_sel drive optional
2018-03-06 14:26:27 +01:00
07de7af86a
kasli: make second eem optional in urukul
2018-03-06 14:26:26 +01:00
