12a1a8ee97
conda: work around 'received dictionary as spec' conda bug
2018-08-19 00:15:12 +08:00
e8092f6f11
conda: use h5py 2.8
...
For some reason, conda installs 2.7 by default, which causes messages such as:
/home/sb/miniconda3/envs/py35/lib/python3.5/site-packages/h5py/__init__.py:36: FutureWarning: Conversion of the second argument of issubdtype from `float` to `np.floating` is deprecated. In future, it will be treated as `np.float64 == np.dtype(float).type`.
2018-06-11 10:15:27 +08:00
whitequark
66a7e09937
conda: fix installation path in artiq-board.
2018-05-26 11:37:41 +08:00
whitequark
086b5ff416
conda: add ignore_prefix_files in the outputs section too.
2018-05-26 11:36:24 +08:00
whitequark
2f4064ef0c
conda: override --install-lib, not --prefix.
2018-05-26 11:34:35 +08:00
whitequark
5f3cb1263c
conda: remove lib/python3.5 from artiq package paths as well.
...
Following c9287cfc
.
2018-05-25 11:31:51 +08:00
whitequark
21406a585e
conda: put noarch: python
on correct artiq-board package.
...
Fixes #989 .
2018-05-25 10:03:33 +08:00
whitequark
9c6978be84
Update LLVM to 6.0.0 and Rust to 1.25.0.
2018-05-06 15:05:00 +00:00
whitequark
843f871fd1
conda: artiq-board should be noarch, like artiq itself.
...
Fixes #989 .
2018-04-28 09:58:23 +08:00
5dfd0e4701
conda: fix artiq-board (again)
2018-04-10 08:34:41 +08:00
6972ba4ee3
conda: fix artiq-board
2018-04-09 19:32:58 +08:00
3c678ad351
conda: split build/run requirements for artiq-board.
2018-04-08 21:03:35 +08:00
8c654748fa
conda: put requirements on correct artiq-board package.
2018-04-08 21:01:50 +08:00
41ae1d8e77
conda: bump misoc
2018-03-22 11:16:50 +08:00
whitequark
24925f1c9e
conda: mark the artiq-build output package as noarch, not toplevel.
...
This also changes `noarch: python` to `noarch: generic` since
this is semantically correct; the bitstream/firmware packages
contain no Python code.
Fixes #960 .
2018-03-15 23:17:23 +00:00
whitequark
c09269a323
conda: handle ARTIQ_VARIANT=phaser.
2018-03-11 18:59:54 +00:00
59fdb32b7b
conda: bump misoc
2018-03-10 22:59:09 +08:00
whitequark
232940e17f
conda: don't use globs in file list.
2018-02-27 17:40:41 +00:00
whitequark
015189b2ae
conda: modernize build.sh.
2018-02-26 16:25:49 +00:00
whitequark
d0d150d974
conda: add back py_ prefix in dependencies.
2018-02-26 15:48:31 +00:00
whitequark
81f0efea9b
conda: use a single artiq-board package.
2018-02-26 15:09:28 +00:00
1568e55388
conda: bump misoc ( #902 )
2018-02-22 11:15:14 +08:00
9db30ce8dc
conda: pin openocd build
2018-01-30 11:12:33 +01:00
49a265453d
conda: sync artiq and artiq-dev
...
c.f. 4c22d64e
2018-01-30 11:03:55 +01:00
59fe69a4b3
conda: use new migen
2018-01-27 23:13:58 +08:00
8276c6588b
conda: use misoc release
2018-01-27 22:22:55 +08:00
a85fd13c21
conda: bump misoc, close #905
...
* cherry-pick c9b36e35
* also pin migen as we don't do .dev tags anymore
2018-01-25 19:34:47 +01:00
5f2256cb25
conda: build artiq- as noarch: python, like artiq itself ( #894 )
2018-01-17 10:12:06 +08:00
6641f4c1ac
conda: use tagged migen/misoc
2018-01-09 15:39:27 +08:00
whitequark
46218c1fff
conda: update rustc to 1.23.0.
2018-01-08 21:55:26 +00:00
e14626e432
conda: bump migen
2017-12-29 11:11:18 +08:00
4ae93d4fd8
conda: bump misoc
2017-12-29 01:41:40 +08:00
8c19d90179
firmware: prepare config block for access from BIOS/bootloader.
...
This is in 3.2 so that users lose storage only once.
2017-12-28 12:23:18 +08:00
whitequark
26dbf0841c
conda: ship runtime.elf in board-specific packages.
...
This is so that backtraces may be symbolized.
2017-12-27 10:48:35 +08:00
whitequark
7af02787e0
conda: bump rustc version requirement.
2017-12-27 10:45:52 +08:00
whitequark
c44d08a826
conda: update llvmlite-artiq dependency.
2017-12-27 10:44:11 +08:00
whitequark
30b7bcf362
Update to LLVM 4.0.
2017-12-27 10:43:04 +08:00
whitequark
99bb1b0b70
runtime: print (address-only) backtraces on core device panics.
2017-12-27 10:37:44 +08:00
6cb7f2e8e2
conda/artiq-dev: fix channel list
...
Now, with conda 4.1 packages are sorted by channel, version, build
number in decreasing priority. The highest matching package is
taken. https://conda.io/docs/user-guide/tasks/manage-channels.html
For the artiq-dev environment, the m-labs/label/dev channel should be
first, then the main channel, then defaults, and then conda-forge
(community supported packages).
closes #864
2017-12-11 07:30:36 +08:00
76a908c8a9
backport Ethernet bugfixes from master
2017-12-07 12:21:21 +08:00
8edb6a135a
conda: openocd=0.10.0 (single-tap proxy bitstreams)
2017-10-20 19:47:54 +02:00
a49bb2bc50
conda: fix llvmlite-artiq dependency
2017-09-30 01:31:50 +08:00
ac28b377c7
targets: phaser → kc705_phaser
2017-09-29 22:54:18 +08:00
74dbb4c977
conda: use non-dev llvmlite-artiq
2017-09-29 21:10:28 +08:00
071439f9bd
conda: use migen/misoc releases
2017-09-29 16:38:33 +08:00
whitequark
7799413a41
firmware: update Rust from 1.18.0 to 1.20.0.
2017-09-24 22:51:44 +00:00
7fe5d737dd
conda: bump migen/misoc
2017-09-06 19:21:15 +08:00
34ddda7a0c
conda: use single-tap proxy bitstreams
2017-08-15 14:30:53 -06:00
5c66b63768
setup.py etc: update license
2017-07-18 11:31:43 +02:00
9045b4cc19
drtio: initial firmware support for multi-link
2017-07-18 00:40:21 +08:00