occheung
/
artiq
forked from M-Labs/artiq
1
0
Fork 0
Code Pull Requests Activity

ad9910: make ram read work for short segments 

also cleanup and style

Signed-off-by: Robert Jördens <rj@quartiq.de>
This commit is contained in:
Robert Jördens 2019-02-21 14:47:31 +00:00
parent 2a60914cb9
commit b57cad77ad
1 changed files with 17 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
artiq/coredevice/ad9910.py
View File

@ -280,10 +280,12 @@ class AD9910:
self.bus.set_config_mu(urukul.SPI_CONFIG, 8, urukul.SPIT_DDS_WR,
self.chip_select)
self.bus.write((_AD9910_REG_RAM | 0x80) << 24)
self.bus.set_config_mu(urukul.SPI_CONFIG | spi.SPI_INPUT, 32,
urukul.SPIT_DDS_RD, self.chip_select)
preload = 8
for i in range(len(data) - 1):
n = len(data) - 1
if n > 0:
self.bus.set_config_mu(urukul.SPI_CONFIG | spi.SPI_INPUT, 32,
urukul.SPIT_DDS_RD, self.chip_select)
preload = min(n, 8)
for i in range(n):
self.bus.write(0)
if i >= preload:
data[i - preload] = self.bus.read()
@ -292,12 +294,12 @@ class AD9910:
urukul.SPIT_DDS_RD, self.chip_select)
self.bus.write(0)
for i in range(preload + 1):
data[(len(data) - preload - 1) + i] = self.bus.read()
data[(n - preload) + i] = self.bus.read()
@kernel
def set_cfr1(self, power_down=0b0000, phase_autoclear=0,
drg_load_lrr=0, drg_autoclear=0,
internal_profile=0, ram_destination=0, ram_enable=0):
drg_load_lrr=0, drg_autoclear=0,
internal_profile=0, ram_destination=0, ram_enable=0):
"""Set CFR1. See the AD9910 datasheet for parameter meanings.
This method does not pulse IO_UPDATE.
@ -382,8 +384,8 @@ class AD9910:
self.set_cfr1(power_down=bits)
self.cpld.io_update.pulse(1*us)
# KLUDGE: ref_time_mu default argument is explicitly marked int64() to avoid
# silent truncation of explicitly passed timestamps. (Compiler bug?)
# KLUDGE: ref_time_mu default argument is explicitly marked int64() to
# avoid silent truncation of explicitly passed timestamps. (Compiler bug?)
@kernel
def set_mu(self, ftw, pow_=0, asf=0x3fff, phase_mode=_PHASE_MODE_DEFAULT,
ref_time_mu=int64(-1), profile=0):
@ -430,7 +432,7 @@ class AD9910:
dt = int32(now_mu()) - int32(ref_time_mu)
pow_ += dt*ftw*self.sysclk_per_mu >> 16
self.write64(_AD9910_REG_PROFILE0 + profile,
(asf << 16) | (pow_ & 0xffff), ftw)
(asf << 16) | (pow_ & 0xffff), ftw)
delay_mu(int64(self.io_update_delay))
self.cpld.io_update.pulse_mu(8) # assumes 8 mu > t_SYN_CCLK
at_mu(now_mu() & ~7) # clear fine TSC again
@ -446,7 +448,8 @@ class AD9910:
:param start: Profile start address in RAM.
:param end: Profile end address in RAM (last address).
:param step: Profile address step size (default: 1).
:param step: Profile time step in units of t_DDS, typically 4 ns
(default: 1).
:param profile: Profile index (0 to 7) (default: 0).
:param nodwell_high: No-dwell high bit (default: 0,
see AD9910 documentation).
@ -542,7 +545,8 @@ class AD9910:
"""
return self.pow_to_turns(self.set_mu(
self.frequency_to_ftw(frequency), self.turns_to_pow(phase),
self.amplitude_to_asf(amplitude), phase_mode, ref_time_mu, profile))
self.amplitude_to_asf(amplitude), phase_mode, ref_time_mu,
profile))
@kernel
def set_att_mu(self, att):
@ -739,7 +743,7 @@ class AD9910:
t1[0] += self.measure_io_update_alignment(i, i + 1)
t1[1] += self.measure_io_update_alignment(i + 1, i + 2)
if ((t1[0] == 0 and t1[1] == 0) or
(t1[0] == repeat and t1[1] == repeat)):
(t1[0] == repeat and t1[1] == repeat)):
# edge is not close to i + 1, can't interpret result
raise ValueError(
"no clear IO_UPDATE-SYNC_CLK alignment edge found")