forked from M-Labs/artiq
1
0
Fork 0

remove old examples

This commit is contained in:
Sebastien Bourdeauducq 2021-11-23 16:37:40 +08:00
parent d8e1a22bdf
commit 3a6fcd069d
12 changed files with 0 additions and 1061 deletions

View File

@ -1,231 +0,0 @@
# Tester device database
core_addr = "192.168.1.70"
device_db = {
"core": {
"type": "local",
"module": "artiq.coredevice.core",
"class": "Core",
"arguments": {"host": core_addr, "ref_period": 1e-9}
},
"core_log": {
"type": "controller",
"host": "::1",
"port": 1068,
"command": "aqctl_corelog -p {port} --bind {bind} " + core_addr
},
"core_cache": {
"type": "local",
"module": "artiq.coredevice.cache",
"class": "CoreCache"
},
"core_dma": {
"type": "local",
"module": "artiq.coredevice.dma",
"class": "CoreDMA"
},
"i2c_switch0": {
"type": "local",
"module": "artiq.coredevice.i2c",
"class": "PCA9548",
"arguments": {"address": 0xe0}
},
"i2c_switch1": {
"type": "local",
"module": "artiq.coredevice.i2c",
"class": "PCA9548",
"arguments": {"address": 0xe2}
},
}
# DIO (EEM5) starting at RTIO channel 0
for i in range(8):
device_db["ttl" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLInOut" if i < 4 else "TTLOut",
"arguments": {"channel": i},
}
device_db["ttl{}_counter".format(i)] = {
"type": "local",
"module": "artiq.coredevice.edge_counter",
"class": "EdgeCounter",
"arguments": {"channel": 8 + i},
}
# Urukul (EEM1) starting at RTIO channel 12
device_db.update(
eeprom_urukul0={
"type": "local",
"module": "artiq.coredevice.kasli_i2c",
"class": "KasliEEPROM",
"arguments": {"port": "EEM1"}
},
spi_urukul0={
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 12}
},
ttl_urukul0_sync={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLClockGen",
"arguments": {"channel": 13, "acc_width": 4}
},
ttl_urukul0_io_update={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 14}
},
ttl_urukul0_sw0={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 15}
},
ttl_urukul0_sw1={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 16}
},
ttl_urukul0_sw2={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 17}
},
ttl_urukul0_sw3={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 18}
},
urukul0_cpld={
"type": "local",
"module": "artiq.coredevice.urukul",
"class": "CPLD",
"arguments": {
"spi_device": "spi_urukul0",
"io_update_device": "ttl_urukul0_io_update",
"sync_device": "ttl_urukul0_sync",
"refclk": 125e6,
"clk_sel": 2
}
}
)
for i in range(4):
device_db["urukul0_ch" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ad9910",
"class": "AD9910",
"arguments": {
"pll_n": 32,
"chip_select": 4 + i,
"cpld_device": "urukul0_cpld",
"sw_device": "ttl_urukul0_sw" + str(i),
"sync_delay_seed": "eeprom_urukul0:" + str(64 + 4*i),
"io_update_delay": "eeprom_urukul0:" + str(64 + 4*i),
}
}
# Sampler (EEM3) starting at RTIO channel 19
device_db["spi_sampler0_adc"] = {
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 19}
}
device_db["spi_sampler0_pgia"] = {
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 20}
}
device_db["spi_sampler0_cnv"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 21},
}
device_db["sampler0"] = {
"type": "local",
"module": "artiq.coredevice.sampler",
"class": "Sampler",
"arguments": {
"spi_adc_device": "spi_sampler0_adc",
"spi_pgia_device": "spi_sampler0_pgia",
"cnv_device": "spi_sampler0_cnv"
}
}
# Zotino (EEM4) starting at RTIO channel 22
device_db["spi_zotino0"] = {
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 22}
}
device_db["ttl_zotino0_ldac"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 23}
}
device_db["ttl_zotino0_clr"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 24}
}
device_db["zotino0"] = {
"type": "local",
"module": "artiq.coredevice.zotino",
"class": "Zotino",
"arguments": {
"spi_device": "spi_zotino0",
"ldac_device": "ttl_zotino0_ldac",
"clr_device": "ttl_zotino0_clr"
}
}
device_db.update(
led0={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 25}
},
led1={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 26}
},
)
device_db.update(
i2c_switch="i2c_switch0",
ttl_out="ttl4",
ttl_out_serdes="ttl4",
loop_out="ttl4",
loop_in="ttl0",
loop_in_counter="ttl0_counter",
# Urukul CPLD with sync and io_update, IFC MODE 0b1000
urukul_cpld="urukul0_cpld",
# Urukul AD9910 with switch TTL, internal 125 MHz MMCX connection
urukul_ad9910="urukul0_ch0",
)

View File

@ -1,21 +0,0 @@
from artiq.experiment import *
class IdleKernel(EnvExperiment):
def build(self):
self.setattr_device("core")
self.setattr_device("led0")
@kernel
def run(self):
start_time = now_mu() + self.core.seconds_to_mu(500*ms)
while self.core.get_rtio_counter_mu() < start_time:
pass
self.core.reset()
while True:
self.led0.pulse(250*ms)
delay(125*ms)
self.led0.pulse(125*ms)
delay(125*ms)
self.led0.pulse(125*ms)
delay(250*ms)

View File

@ -1,34 +0,0 @@
core_addr = "192.168.1.70"
device_db = {
"core": {
"type": "local",
"module": "artiq.coredevice.core",
"class": "Core",
"arguments": {"host": core_addr, "ref_period": 1/(8*150e6)}
},
"core_log": {
"type": "controller",
"host": "::1",
"port": 1068,
"command": "aqctl_corelog -p {port} --bind {bind} " + core_addr
},
"core_cache": {
"type": "local",
"module": "artiq.coredevice.cache",
"class": "CoreCache"
},
"core_dma": {
"type": "local",
"module": "artiq.coredevice.dma",
"class": "CoreDMA"
},
}
for i in range(3):
device_db["led" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": i << 16},
}

View File

@ -1,16 +0,0 @@
from artiq.experiment import *
class Blink(EnvExperiment):
def build(self):
self.setattr_device("core")
self.leds = [self.get_device("led0"), self.get_device("led2")]
@kernel
def run(self):
self.core.reset()
while True:
for led in self.leds:
led.pulse(200*ms)
delay(200*ms)

View File

@ -1,177 +0,0 @@
core_addr = "192.168.1.70"
device_db = {
"core": {
"type": "local",
"module": "artiq.coredevice.core",
"class": "Core",
"arguments": {"host": core_addr, "ref_period": 1/(8*150e6)}
},
"core_log": {
"type": "controller",
"host": "::1",
"port": 1068,
"command": "aqctl_corelog -p {port} --bind {bind} " + core_addr
},
"core_cache": {
"type": "local",
"module": "artiq.coredevice.cache",
"class": "CoreCache"
},
"core_dma": {
"type": "local",
"module": "artiq.coredevice.dma",
"class": "CoreDMA"
},
}
device_db.update(
spi_urukul0={
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 0}
},
ttl_urukul0_io_update={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 1}
},
ttl_urukul0_sw0={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 2}
},
ttl_urukul0_sw1={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 3}
},
ttl_urukul0_sw2={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 4}
},
ttl_urukul0_sw3={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 5}
},
urukul0_cpld={
"type": "local",
"module": "artiq.coredevice.urukul",
"class": "CPLD",
"arguments": {
"spi_device": "spi_urukul0",
"io_update_device": "ttl_urukul0_io_update",
"refclk": 150e6,
"clk_sel": 2
}
}
)
for i in range(4):
device_db["urukul0_ch" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ad9910",
"class": "AD9910",
"arguments": {
"pll_n": 16, # 600MHz sample rate
"pll_vco": 2,
"chip_select": 4 + i,
"cpld_device": "urukul0_cpld",
"sw_device": "ttl_urukul0_sw" + str(i)
}
}
"""
artiq_route routing.bin init
artiq_route routing.bin set 0 0
artiq_route routing.bin set 1 1 0
artiq_route routing.bin set 2 1 1 0
artiq_route routing.bin set 3 2 0
artiq_route routing.bin set 4 2 1 0
artiq_coremgmt -D kasli config write -f routing_table routing.bin
"""
for sayma in range(2):
amc_base = 0x010000 + sayma*0x020000
rtm_base = 0x020000 + sayma*0x020000
for i in range(4):
device_db["led" + str(4*sayma+i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + i}
}
for i in range(2):
device_db["ttl_mcx" + str(2*sayma+i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLInOut",
"arguments": {"channel": amc_base + 4 + i}
}
for i in range(8):
device_db["sawg" + str(8*sayma+i)] = {
"type": "local",
"module": "artiq.coredevice.sawg",
"class": "SAWG",
"arguments": {"channel_base": amc_base + 6 + i*10, "parallelism": 4}
}
for basemod in range(2):
for i in range(4):
device_db["sawg_sw" + str(8*sayma+4*basemod+i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": rtm_base + basemod*9 + i}
}
att_idx = 2*sayma + basemod
device_db["basemod_att_rst_n"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": rtm_base + basemod*9 + 4}
}
device_db["basemod_att_clk"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": rtm_base + basemod*9 + 5}
}
device_db["basemod_att_le"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": rtm_base + basemod*9 + 6}
}
device_db["basemod_att_mosi"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": rtm_base + basemod*9 + 7}
}
device_db["basemod_att_miso"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLInOut",
"arguments": {"channel": rtm_base + basemod*9 + 8}
}
device_db["basemod_att"+str(att_idx)] = {
"type": "local",
"module": "artiq.coredevice.basemod_att",
"class": "BaseModAtt",
"arguments": {
"rst_n": "basemod_att_rst_n"+str(att_idx),
"clk": "basemod_att_clk"+str(att_idx),
"le": "basemod_att_le"+str(att_idx),
"mosi": "basemod_att_mosi"+str(att_idx),
"miso": "basemod_att_miso"+str(att_idx),
}
}

View File

@ -1,25 +0,0 @@
from artiq.experiment import *
class BaseMod(EnvExperiment):
def build(self):
self.setattr_device("core")
self.basemods = [self.get_device("basemod_att0"), self.get_device("basemod_att1")]
self.rfsws = [self.get_device("sawg_sw"+str(i)) for i in range(8)]
@kernel
def run(self):
self.core.reset()
for basemod in self.basemods:
self.core.break_realtime()
delay(10*ms)
basemod.reset()
delay(10*ms)
basemod.set(0.0, 0.0, 0.0, 0.0)
delay(10*ms)
print(basemod.get_mu())
self.core.break_realtime()
for rfsw in self.rfsws:
rfsw.on()
delay(1*ms)

View File

@ -1,37 +0,0 @@
from artiq.experiment import *
class Sines2Sayma(EnvExperiment):
def build(self):
self.setattr_device("core")
self.sawgs = [self.get_device("sawg"+str(i)) for i in range(16)]
@kernel
def drtio_is_up(self):
for i in range(5):
if not self.core.get_rtio_destination_status(i):
return False
return True
@kernel
def run(self):
while True:
print("waiting for DRTIO ready...")
while not self.drtio_is_up():
pass
print("OK")
self.core.reset()
for sawg in self.sawgs:
delay(1*ms)
sawg.reset()
for sawg in self.sawgs:
delay(1*ms)
sawg.amplitude1.set(.4)
# Do not use a sub-multiple of oscilloscope sample rates.
sawg.frequency0.set(9*MHz)
while self.drtio_is_up():
pass

View File

@ -1,89 +0,0 @@
from artiq.experiment import *
class SinesUrukulSayma(EnvExperiment):
def build(self):
self.setattr_device("core")
self.setattr_device("urukul0_cpld")
# Urukul clock output syntonized to the RTIO clock.
# Can be used as HMC830 reference on Sayma RTM.
# When using this reference, Sayma must be recalibrated every time Urukul
# is rebooted, as Urukul is not synchronized to the Kasli.
self.urukul_hmc_ref = self.get_device("urukul0_ch3")
# Urukul measurement channels - compare with SAWG outputs.
# When testing sync, do not reboot Urukul, as it is not
# synchronized to the Kasli.
self.urukul_meas = [self.get_device("urukul0_ch" + str(i)) for i in range(3)]
# The same waveform is output on all first 4 SAWG channels (first DAC).
self.sawgs = [self.get_device("sawg"+str(i)) for i in range(4)]
self.basemod = self.get_device("basemod_att0")
self.rfsws = [self.get_device("sawg_sw"+str(i)) for i in range(4)]
# DRTIO destinations:
# 0: local
# 1: Sayma AMC
# 2: Sayma RTM
@kernel
def drtio_is_up(self):
for i in range(3):
if not self.core.get_rtio_destination_status(i):
return False
return True
@kernel
def run(self):
f = 9*MHz
dds_ftw = self.urukul_meas[0].frequency_to_ftw(f)
sawg_ftw = self.sawgs[0].frequency0.to_mu(f)
if dds_ftw != sawg_ftw:
print("DDS and SAWG FTWs do not match:", dds_ftw, sawg_ftw)
return
self.core.reset()
self.urukul0_cpld.init()
delay(1*ms)
self.urukul_hmc_ref.init()
self.urukul_hmc_ref.set_mu(0x40000000, asf=self.urukul_hmc_ref.amplitude_to_asf(0.6))
self.urukul_hmc_ref.set_att(6.)
self.urukul_hmc_ref.sw.on()
for urukul_ch in self.urukul_meas:
delay(1*ms)
urukul_ch.init()
urukul_ch.set_mu(dds_ftw, asf=urukul_ch.amplitude_to_asf(0.5))
urukul_ch.set_att(6.)
urukul_ch.sw.on()
while True:
print("waiting for DRTIO ready...")
while not self.drtio_is_up():
pass
print("OK")
self.core.reset()
delay(10*ms)
self.basemod.reset()
delay(10*ms)
self.basemod.set(3.0, 3.0, 3.0, 3.0)
delay(10*ms)
for rfsw in self.rfsws:
delay(1*ms)
rfsw.on()
for sawg in self.sawgs:
delay(1*ms)
sawg.reset()
for sawg in self.sawgs:
delay(1*ms)
sawg.amplitude1.set(.4)
sawg.frequency0.set_mu(sawg_ftw)
sawg.phase0.set_mu(sawg_ftw*now_mu() >> 17)
while self.drtio_is_up():
pass

View File

@ -1,95 +0,0 @@
core_addr = "192.168.1.65"
device_db = {
"core": {
"type": "local",
"module": "artiq.coredevice.core",
"class": "Core",
"arguments": {"host": core_addr, "ref_period": 1/(8*150e6)}
},
"core_log": {
"type": "controller",
"host": "::1",
"port": 1068,
"command": "aqctl_corelog -p {port} --bind {bind} " + core_addr
},
"core_cache": {
"type": "local",
"module": "artiq.coredevice.cache",
"class": "CoreCache"
},
"core_dma": {
"type": "local",
"module": "artiq.coredevice.dma",
"class": "CoreDMA"
}
}
# master peripherals
for i in range(4):
device_db["led" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": i},
}
# DEST#1 peripherals
amc_base = 0x070000
rtm_base = 0x020000
for i in range(4):
device_db["led" + str(4+i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + i},
}
#DIO (EEM0) starting at RTIO channel 0x000056
for i in range(8):
device_db["ttl" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + 0x000056 + i},
}
#DIO (EEM1) starting at RTIO channel 0x00005e
for i in range(8):
device_db["ttl" + str(8+i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + 0x00005e + i},
}
device_db["fmcdio_dirctl_clk"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + 0x000066}
}
device_db["fmcdio_dirctl_ser"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + 0x000067}
}
device_db["fmcdio_dirctl_latch"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": amc_base + 0x000068}
}
device_db["fmcdio_dirctl"] = {
"type": "local",
"module": "artiq.coredevice.shiftreg",
"class": "ShiftReg",
"arguments": {"clk": "fmcdio_dirctl_clk",
"ser": "fmcdio_dirctl_ser",
"latch": "fmcdio_dirctl_latch"}
}

View File

@ -1,129 +0,0 @@
import sys
import os
import select
from artiq.experiment import *
from artiq.coredevice.fmcdio_vhdci_eem import *
def chunker(seq, size):
res = []
for el in seq:
res.append(el)
if len(res) == size:
yield res
res = []
if res:
yield res
def is_enter_pressed() -> TBool:
if os.name == "nt":
if msvcrt.kbhit() and msvcrt.getch() == b"\r":
return True
else:
return False
else:
if select.select([sys.stdin, ], [], [], 0.0)[0]:
sys.stdin.read(1)
return True
else:
return False
class Demo(EnvExperiment):
def build(self):
self.setattr_device("core")
self.setattr_device("fmcdio_dirctl")
self.leds = dict()
self.ttl_outs = dict()
ddb = self.get_device_db()
for name, desc in ddb.items():
if isinstance(desc, dict) and desc["type"] == "local":
module, cls = desc["module"], desc["class"]
if (module, cls) == ("artiq.coredevice.ttl", "TTLOut"):
dev = self.get_device(name)
if "led" in name: # guess
self.leds[name] = dev
elif "ttl" in name: # to exclude fmcdio_dirctl
self.ttl_outs[name] = dev
self.leds = sorted(self.leds.items(), key=lambda x: x[1].channel)
self.ttl_outs = sorted(self.ttl_outs.items(), key=lambda x: x[1].channel)
self.dirctl_word = (
shiftreg_bits(0, dio_bank0_out_pins | dio_bank1_out_pins) |
shiftreg_bits(1, dio_bank0_out_pins | dio_bank1_out_pins)
)
@kernel
def init(self):
self.core.break_realtime()
print("*** Waiting for DRTIO ready...")
drtio_indices = [7]
for i in drtio_indices:
while not self.drtio_is_up(i):
pass
self.fmcdio_dirctl.set(self.dirctl_word)
@kernel
def drtio_is_up(self, drtio_index):
if not self.core.get_rtio_destination_status(drtio_index):
return False
print("DRTIO #", drtio_index, "is ready\n")
return True
@kernel
def test_led(self, led):
while not is_enter_pressed():
self.core.break_realtime()
# do not fill the FIFOs too much to avoid long response times
t = now_mu() - self.core.seconds_to_mu(0.2)
while self.core.get_rtio_counter_mu() < t:
pass
for i in range(3):
led.pulse(100*ms)
delay(100*ms)
def test_leds(self):
print("*** Testing LEDs.")
print("Check for blinking. Press ENTER when done.")
for led_name, led_dev in self.leds:
print("Testing LED: {}".format(led_name))
self.test_led(led_dev)
@kernel
def test_ttl_out_chunk(self, ttl_chunk):
while not is_enter_pressed():
self.core.break_realtime()
for _ in range(50000):
i = 0
for ttl in ttl_chunk:
i += 1
for _ in range(i):
ttl.pulse(1*us)
delay(1*us)
delay(10*us)
def test_ttl_outs(self):
print("*** Testing TTL outputs.")
print("Outputs are tested in groups of 4. Touch each TTL connector")
print("with the oscilloscope probe tip, and check that the number of")
print("pulses corresponds to its number in the group.")
print("Press ENTER when done.")
for ttl_chunk in chunker(self.ttl_outs, 4):
print("Testing TTL outputs: {}.".format(", ".join(name for name, dev in ttl_chunk)))
self.test_ttl_out_chunk([dev for name, dev in ttl_chunk])
def run(self):
self.core.reset()
if self.leds:
self.test_leds()
if self.ttl_outs:
self.test_ttl_outs()

View File

@ -1,166 +0,0 @@
core_addr = "192.168.1.60"
device_db = {
"core": {
"type": "local",
"module": "artiq.coredevice.core",
"class": "Core",
"arguments": {"host": core_addr, "ref_period": 1/(8*150e6)}
},
"core_log": {
"type": "controller",
"host": "::1",
"port": 1068,
"command": "aqctl_corelog -p {port} --bind {bind} " + core_addr
},
"core_cache": {
"type": "local",
"module": "artiq.coredevice.cache",
"class": "CoreCache"
},
"core_dma": {
"type": "local",
"module": "artiq.coredevice.dma",
"class": "CoreDMA"
},
}
for i in range(4):
device_db["led" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": i},
}
for i in range(2):
device_db["ttl" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLInOut",
"arguments": {"channel": 4 + i},
}
device_db.update(
fmcdio_dirctl_clk={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 6}
},
fmcdio_dirctl_ser={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 7}
},
fmcdio_dirctl_latch={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 8}
},
fmcdio_dirctl={
"type": "local",
"module": "artiq.coredevice.shiftreg",
"class": "ShiftReg",
"arguments": {"clk": "fmcdio_dirctl_clk",
"ser": "fmcdio_dirctl_ser",
"latch": "fmcdio_dirctl_latch"}
}
)
device_db.update(
spi_urukul0={
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 17}
},
ttl_urukul0_io_update={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 18}
},
ttl_urukul0_sw0={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 19}
},
ttl_urukul0_sw1={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 20}
},
ttl_urukul0_sw2={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 21}
},
ttl_urukul0_sw3={
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 22}
},
urukul0_cpld={
"type": "local",
"module": "artiq.coredevice.urukul",
"class": "CPLD",
"arguments": {
"spi_device": "spi_urukul0",
"io_update_device": "ttl_urukul0_io_update",
"refclk": 125e6,
"clk_sel": 0
}
}
)
for i in range(4):
device_db["urukul0_ch" + str(i)] = {
"type": "local",
"module": "artiq.coredevice.ad9910",
"class": "AD9910",
"arguments": {
"pll_n": 32,
"chip_select": 4 + i,
"cpld_device": "urukul0_cpld",
"sw_device": "ttl_urukul0_sw" + str(i)
}
}
device_db["spi_zotino0"] = {
"type": "local",
"module": "artiq.coredevice.spi2",
"class": "SPIMaster",
"arguments": {"channel": 23}
}
device_db["ttl_zotino0_ldac"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 24}
}
device_db["ttl_zotino0_clr"] = {
"type": "local",
"module": "artiq.coredevice.ttl",
"class": "TTLOut",
"arguments": {"channel": 25}
}
device_db["zotino0"] = {
"type": "local",
"module": "artiq.coredevice.zotino",
"class": "Zotino",
"arguments": {
"spi_device": "spi_zotino0",
"ldac_device": "ttl_zotino0_ldac",
"clr_device": "ttl_zotino0_clr"
}
}

View File

@ -1,41 +0,0 @@
from artiq.experiment import *
from artiq.coredevice.fmcdio_vhdci_eem import *
class Demo(EnvExperiment):
def build(self):
self.setattr_device("core")
self.setattr_device("fmcdio_dirctl")
self.ttls = [self.get_device("ttl" + str(i)) for i in range(8)]
self.setattr_device("urukul0_cpld")
self.urukul_chs = [self.get_device("urukul0_ch" + str(i)) for i in range(4)]
self.setattr_device("zotino0")
self.dirctl_word = (
shiftreg_bits(1, urukul_out_pins) |
shiftreg_bits(0, urukul_aux_out_pins) |
shiftreg_bits(2, dio_bank0_out_pins | dio_bank1_out_pins) |
shiftreg_bits(3, zotino_out_pins))
@kernel
def run(self):
self.core.reset()
delay(10*ms)
self.fmcdio_dirctl.set(self.dirctl_word)
delay(10*ms)
self.urukul0_cpld.init()
delay(10*ms)
self.zotino0.init()
delay(1*ms)
for i in range(32):
self.zotino0.write_dac(i, i/4)
delay(1*ms)
while True:
for ttl in self.ttls:
ttl.pulse(100*ms)
for urukul_ch in self.urukul_chs:
urukul_ch.sw.pulse(100*ms)