1
0
Fork 0
nix-scripts/nixbld-etc-nixos/configuration.nix

590 lines
18 KiB
Nix
Raw Normal View History

2019-02-16 00:33:08 +08:00
# Edit this configuration file to define what should be installed on
# your system. Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running nixos-help).
{ config, pkgs, ... }:
let
netifWan = "enp0s31f6";
netifLan = "enp3s0";
netifWifi = "wlp4s0";
2019-09-18 12:38:35 +08:00
netifSit = "henet0";
hydraWwwOutputs = "/var/www/hydra-outputs";
in
2019-02-16 00:33:08 +08:00
{
imports =
2019-09-13 12:48:51 +08:00
[
2019-02-16 00:33:08 +08:00
./hardware-configuration.nix
./homu/nixos-module.nix
2019-05-24 15:19:33 +08:00
./backup-module.nix
2019-09-13 12:48:51 +08:00
(builtins.fetchTarball {
url = "https://gitlab.com/simple-nixos-mailserver/nixos-mailserver/-/archive/v2.2.1/nixos-mailserver-v2.2.1.tar.gz";
sha256 = "03d49v8qnid9g9rha0wg2z6vic06mhp0b049s3whccn1axvs2zzx";
})
2019-02-16 00:33:08 +08:00
];
# Use the systemd-boot EFI boot loader.
boot.loader.systemd-boot.enable = true;
boot.loader.efi.canTouchEfiVariables = true;
security.apparmor.enable = true;
2019-09-22 20:25:03 +08:00
security.pam.yubico = {
enable = true;
id = "49094";
control = "required";
};
2019-09-05 15:27:44 +08:00
networking = {
hostName = "nixbld";
firewall = {
allowedTCPPorts = [ 80 443 ];
allowedUDPPorts = [ 53 67 ];
trustedInterfaces = [ netifLan ];
2019-09-05 15:27:44 +08:00
};
2019-10-16 13:48:13 +08:00
interfaces."${netifLan}" = {
ipv4.addresses = [{
address = "192.168.1.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:1::";
prefixLength = 64;
}];
};
interfaces."${netifWifi}" = {
ipv4.addresses = [{
address = "192.168.12.1";
prefixLength = 24;
}];
ipv6.addresses = [{
address = "2001:470:f821:2::";
prefixLength = 64;
}];
};
2019-09-05 15:27:44 +08:00
nat = {
enable = true;
externalInterface = netifWan;
internalInterfaces = [ netifLan netifWifi ];
extraCommands = ''
iptables -w -N block-lan-from-wifi
iptables -w -A block-lan-from-wifi -i ${netifLan} -o ${netifWifi} -j DROP
iptables -w -A block-lan-from-wifi -i ${netifWifi} -o ${netifLan} -j DROP
iptables -w -A FORWARD -j block-lan-from-wifi
'';
extraStopCommands = ''
iptables -w -D FORWARD -j block-lan-from-wifi 2>/dev/null|| true
iptables -w -F block-lan-from-wifi 2>/dev/null|| true
iptables -w -X block-lan-from-wifi 2>/dev/null|| true
'';
2019-09-05 15:27:44 +08:00
};
2019-09-18 12:38:35 +08:00
sits."${netifSit}" = {
dev = netifWan;
remote = "216.218.221.6";
local = "42.200.147.171";
ttl = 255;
};
interfaces."${netifSit}".ipv6 = {
addresses = [{ address = "2001:470:18:629::2"; prefixLength = 64; }];
routes = [{ address = "::"; prefixLength = 0; }];
};
2019-09-05 15:27:44 +08:00
};
2019-10-16 13:48:13 +08:00
boot.kernel.sysctl."net.ipv6.conf.all.forwarding" = "1";
boot.kernel.sysctl."net.ipv6.conf.default.forwarding" = "1";
2019-09-05 15:27:44 +08:00
services.hostapd = {
enable = true;
interface = netifWifi;
2019-09-05 15:27:44 +08:00
hwMode = "g";
ssid = "M-Labs";
wpaPassphrase = (import /etc/nixos/secret/wifi_password.nix);
};
services.dnsmasq = {
enable = true;
extraConfig = ''
interface=${netifLan}
interface=${netifWifi}
2019-09-05 15:27:44 +08:00
bind-interfaces
dhcp-range=interface:${netifLan},192.168.1.81,192.168.1.254,24h
dhcp-range=interface:${netifWifi},192.168.12.10,192.168.12.254,24h
2019-10-16 13:48:13 +08:00
enable-ra
dhcp-range=interface:${netifLan},::,constructor:${netifLan},ra-names
dhcp-range=interface:${netifWifi},::,constructor:${netifWifi},ra-only
# Default IP addresses for ARTIQ boards
address=/thermostat/192.168.1.26
address=/kc705/192.168.1.50
address=/zc706/192.168.1.51
address=/sayma/192.168.1.60
address=/kasli/192.168.1.70
2019-10-31 11:14:20 +08:00
address=/kasli-customer/192.168.1.75
# uTCA MCH from NAT
address=/tschernobyl/192.168.1.80
2019-09-05 15:27:44 +08:00
'';
};
2019-02-16 00:33:08 +08:00
# Select internationalisation properties.
i18n = {
consoleFont = "Lat2-Terminus16";
consoleKeyMap = "de";
defaultLocale = "en_US.UTF-8";
};
# Set your time zone.
time.timeZone = "Asia/Hong_Kong";
# List packages installed in system profile. To search, run:
# $ nix search wget
environment.systemPackages = with pkgs; [
wget vim git file lm_sensors acpi pciutils psmisc xc3sprog openocd gdb telnet whois zip unzip nixops
irssi tmux adoptopenjdk-openj9-bin-11 tigervnc xorg.xauth icewm xterm xorg.xsetroot usbutils imagemagick jq
2019-02-16 00:33:08 +08:00
];
# Some programs need SUID wrappers, can be configured further or are
# started in user sessions.
# programs.mtr.enable = true;
# programs.gnupg.agent = { enable = true; enableSSHSupport = true; };
# List services that you want to enable:
2019-09-11 17:37:59 +08:00
services.apcupsd.enable = true;
services.apcupsd.configText = ''
UPSTYPE usb
NISIP 127.0.0.1
BATTERYLEVEL 10
MINUTES 5
'';
2019-02-16 00:33:08 +08:00
# Enable the OpenSSH daemon.
services.openssh.enable = true;
services.openssh.forwardX11 = true;
2019-04-18 19:48:58 +08:00
programs.mosh.enable = true;
2019-02-16 00:33:08 +08:00
2019-07-31 22:48:10 +08:00
programs.fish.enable = true;
2019-02-16 00:33:08 +08:00
# Enable CUPS to print documents.
services.avahi.enable = true;
services.avahi.interfaces = [ netifLan ];
2019-02-16 00:33:08 +08:00
services.avahi.publish.enable = true;
services.avahi.publish.userServices = true;
2019-09-18 15:38:07 +08:00
nixpkgs.config.allowUnfree = true;
2019-02-16 00:33:08 +08:00
services.printing.enable = true;
services.printing.drivers = [ pkgs.hplipWithPlugin ];
services.printing.browsing = true;
services.printing.listenAddresses = [ "*:631" ];
2019-02-16 00:33:08 +08:00
services.printing.defaultShared = true;
hardware.sane.enable = true;
hardware.sane.extraBackends = [ pkgs.hplipWithPlugin ];
users.extraGroups.plugdev = { };
users.extraUsers.sb = {
isNormalUser = true;
2019-09-05 16:47:01 +08:00
extraGroups = ["wheel" "plugdev" "dialout" "lp" "scanner"];
2019-07-31 22:48:10 +08:00
shell = pkgs.fish;
2019-02-16 00:33:08 +08:00
};
2019-04-18 19:49:02 +08:00
users.extraUsers.rj = {
isNormalUser = true;
2019-09-05 16:47:01 +08:00
extraGroups = ["wheel" "plugdev" "dialout"];
2019-04-18 19:49:02 +08:00
};
2019-04-21 10:44:14 +08:00
users.extraUsers.astro = {
isNormalUser = true;
2019-09-05 16:47:01 +08:00
extraGroups = ["plugdev" "dialout"];
2019-04-21 10:44:14 +08:00
};
2019-05-02 13:18:31 +08:00
users.extraUsers.whitequark = {
isNormalUser = true;
extraGroups = ["plugdev" "dialout"];
};
2019-04-08 23:45:30 +08:00
users.extraUsers.nix = {
isNormalUser = true;
};
2019-02-16 00:33:08 +08:00
security.sudo.wheelNeedsPassword = false;
2019-05-02 13:06:07 +08:00
security.hideProcessInformation = true;
boot.kernel.sysctl."kernel.dmesg_restrict" = true;
2019-09-18 15:38:07 +08:00
services.udev.packages = [ pkgs.openocd pkgs.sane-backends ];
2019-02-16 00:33:08 +08:00
services.udev.extraRules = ''
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:5:1.1", \
SYMLINK+="ttyUSB_sayma-1_0"
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:5:1.2", \
SYMLINK+="ttyUSB_sayma-1_1"
ACTION=="add", SUBSYSTEM=="tty", \
ENV{ID_SERIAL}=="FTDI_Quad_RS232-HS", \
ENV{ID_PATH}=="pci-0000:00:14.0-usb-0:1:1.2", \
SYMLINK+="ttyUSB_kasli-n1"
'';
2019-04-08 23:45:30 +08:00
nix.distributedBuilds = true;
2019-04-08 22:35:38 +08:00
nix.buildMachines = [
{
hostName = "localhost";
maxJobs = 4;
system = "x86_64-linux";
supportedFeatures = ["big-parallel"];
}
2019-04-08 23:45:30 +08:00
{
hostName = "rpi-3";
2019-04-08 23:45:30 +08:00
sshUser = "nix";
2019-04-14 18:35:01 +08:00
sshKey = "/etc/nixos/secret/nix_id_rsa";
2019-04-08 23:45:30 +08:00
maxJobs = 1;
system = "aarch64-linux";
}
2019-04-08 22:35:38 +08:00
];
2019-02-16 00:33:08 +08:00
services.hydra = {
enable = true;
useSubstitutes = true;
2019-02-16 00:33:08 +08:00
hydraURL = "https://nixbld.m-labs.hk";
notificationSender = "hydra@m-labs.hk";
2019-05-29 15:48:59 +08:00
minimumDiskFree = 15; # in GB
2019-02-16 00:33:08 +08:00
minimumDiskFreeEvaluator = 1;
2019-02-17 23:19:36 +08:00
extraConfig =
''
2019-02-16 00:33:08 +08:00
binary_cache_secret_key_file = /etc/nixos/secret/nixbld.m-labs.hk-1
max_output_size = 10000000000
2019-07-19 14:54:18 +08:00
<runcommand>
job = web:web:web
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/web
2019-07-19 14:54:18 +08:00
</runcommand>
2019-11-12 10:43:50 +08:00
<runcommand>
job = artiq:full:sipyco-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-html
</runcommand>
<runcommand>
job = artiq:full:sipyco-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/sipyco-manual-latexpdf
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-html
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-html-beta
</runcommand>
<runcommand>
job = artiq:full:artiq-manual-latexpdf
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-manual-latexpdf-beta
</runcommand>
2019-07-18 00:20:05 +08:00
<runcommand>
job = artiq:full:conda-channel
command = [ $(jq '.buildStatus' < $HYDRA_JSON) = 0 ] && ln -sfn $(jq -r '.outputs[0].path' < $HYDRA_JSON) ${hydraWwwOutputs}/artiq-conda-channel-beta
2019-07-18 00:20:05 +08:00
</runcommand>
2019-02-17 23:19:36 +08:00
'';
2019-02-16 00:33:08 +08:00
};
systemd.services.hydra-www-outputs-init = {
description = "Set up a hydra-owned directory for build outputs";
wantedBy = [ "multi-user.target" ];
requiredBy = [ "hydra-queue-runner.service" ];
before = [ "hydra-queue-runner.service" ];
serviceConfig = {
Type = "oneshot";
ExecStart = [ "${pkgs.coreutils}/bin/mkdir -p ${hydraWwwOutputs}" "${pkgs.coreutils}/bin/chown hydra-queue-runner:hydra ${hydraWwwOutputs}" ];
};
};
2019-02-16 00:33:08 +08:00
nix.extraOptions = ''
secret-key-files = /etc/nixos/secret/nixbld.m-labs.hk-1
'';
nix.sandboxPaths = ["/opt"];
2019-05-24 10:26:59 +08:00
services.munin-node.enable = true;
services.munin-cron = {
enable = true;
hosts = ''
[${config.networking.hostName}]
address localhost
'';
};
2019-05-24 15:19:33 +08:00
services.mlabs-backup.enable = true;
2019-05-24 10:26:59 +08:00
2019-03-31 23:51:06 +08:00
services.gitea = {
2019-03-27 22:42:12 +08:00
enable = true;
2019-03-31 23:51:06 +08:00
httpPort = 3001;
rootUrl = "https://git.m-labs.hk/";
2019-04-01 10:55:59 +08:00
appName = "M-Labs Git";
cookieSecure = true;
disableRegistration = true;
extraConfig =
''
[attachment]
ALLOWED_TYPES = */*
'';
2019-03-27 22:42:12 +08:00
};
2019-04-01 00:12:46 +08:00
services.mattermost = {
enable = true;
siteUrl = "https://chat.m-labs.hk/";
mutableConfig = true;
};
services.matterbridge = {
enable = true;
configPath = "/etc/nixos/secret/matterbridge.toml";
2019-04-01 00:12:46 +08:00
};
nixpkgs.config.packageOverrides = super: let self = super.pkgs; in {
2019-05-21 16:47:47 +08:00
hydra = super.hydra.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./hydra-conda.patch ./hydra-retry.patch ];
2019-05-21 16:47:47 +08:00
hydraPath = oa.hydraPath + ":" + super.lib.makeBinPath [ super.jq ];
});
matterbridge = super.matterbridge.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./matterbridge-disable-github.patch ];
2019-05-21 16:47:47 +08:00
});
2019-10-22 20:09:56 +08:00
nixops = super.nixops.overrideAttrs(oa: {
patches = oa.patches or [] ++ [ ./nixops-665.patch ];
});
2019-11-07 16:14:01 +08:00
# https://github.com/NixOS/nixpkgs/issues/70930
# perl 5.30 breaks plugins
munin = super.munin.override {
perlPackages = super.perl528Packages;
rrdtool = super.rrdtool.override {
perl = super.perl528Packages.perl;
};
};
};
2019-04-01 00:12:46 +08:00
2019-04-01 19:47:47 +08:00
security.acme.certs = {
"nixbld.m-labs.hk" = {
webroot = "/var/lib/acme/acme-challenge";
extraDomains = {
2019-04-21 10:43:48 +08:00
"m-labs.hk" = null;
"www.m-labs.hk" = null;
2019-07-19 16:23:47 +08:00
"conda.m-labs.hk" = null;
2019-04-01 19:47:47 +08:00
"lab.m-labs.hk" = null;
"git.m-labs.hk" = null;
"chat.m-labs.hk" = null;
"hooks.m-labs.hk" = null;
2019-05-21 16:08:54 +08:00
"forum.m-labs.hk" = null;
2019-10-17 15:17:42 +08:00
"perso.m-labs.hk" = null;
2019-10-09 21:33:37 +08:00
"openhardware.hk" = null;
"git.openhardware.hk" = null;
2019-04-01 19:47:47 +08:00
};
};
};
2019-03-27 22:42:12 +08:00
services.nginx = {
enable = true;
recommendedProxySettings = true;
2019-07-27 11:27:28 +08:00
recommendedGzipSettings = true;
2019-07-19 14:54:18 +08:00
virtualHosts = let
mainWebsite = {
2019-04-21 10:43:48 +08:00
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
2019-07-19 15:57:35 +08:00
root = "${hydraWwwOutputs}/web";
2019-07-26 21:29:54 +08:00
extraConfig = ''
error_page 404 /404.html;
'';
2019-07-27 11:27:28 +08:00
locations."^~ /fonts/".extraConfig = ''
expires 60d;
'';
locations."^~ /js/".extraConfig = ''
expires 60d;
'';
locations."/MathJax/" = {
alias = "/var/www/MathJax/";
2019-07-27 11:27:28 +08:00
extraConfig = ''
expires 60d;
'';
2019-07-19 15:57:35 +08:00
};
2019-07-19 16:23:47 +08:00
# legacy URLs, redirect to avoid breaking people's bookmarks
locations."/gateware.html".extraConfig = ''
2019-07-18 23:25:35 +08:00
return 301 /gateware/migen/;
'';
locations."/migen".extraConfig = ''
return 301 /gateware/migen/;
'';
locations."/artiq".extraConfig = ''
return 301 /experiment-control/artiq/;
'';
locations."/artiq/resources.html".extraConfig = ''
return 301 /experiment-control/resources/;
'';
2019-07-19 16:23:47 +08:00
2019-11-12 10:43:50 +08:00
# autogenerated manuals
locations."/artiq/sipyco-manual/" = {
2019-11-12 18:34:03 +08:00
alias = "${hydraWwwOutputs}/sipyco-manual-html/share/doc/sipyco-manual/html/";
2019-11-12 10:43:50 +08:00
};
locations."=/artiq/sipyco-manual.pdf" = {
2019-11-12 18:34:03 +08:00
alias = "${hydraWwwOutputs}/sipyco-manual-latexpdf/share/doc/sipyco-manual/SiPyCo.pdf";
2019-11-12 10:43:50 +08:00
};
locations."/artiq/manual-beta/" = {
alias = "${hydraWwwOutputs}/artiq-manual-html-beta/share/doc/artiq-manual/html/";
};
locations."=/artiq/manual-beta.pdf" = {
alias = "${hydraWwwOutputs}/artiq-manual-latexpdf-beta/share/doc/artiq-manual/ARTIQ.pdf";
2019-07-18 00:20:05 +08:00
};
2019-07-19 16:23:47 +08:00
# legacy content
locations."/migen/manual/" = {
alias = "/var/www/m-labs.hk.old/migen/manual/";
2019-07-29 11:44:48 +08:00
};
locations."/artiq/manual/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
2019-07-19 16:23:47 +08:00
};
locations."/artiq/manual-release-4/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-4/";
2019-07-22 19:32:18 +08:00
};
locations."/artiq/manual-release-3/" = {
alias = "/var/www/m-labs.hk.old/artiq/manual-release-3/";
2019-07-19 16:23:47 +08:00
};
2019-04-21 10:43:48 +08:00
};
2019-07-19 14:54:18 +08:00
in {
"m-labs.hk" = mainWebsite;
"www.m-labs.hk" = mainWebsite;
"lab.m-labs.hk" = {
addSSL = true;
2019-04-01 19:47:47 +08:00
useACMEHost = "nixbld.m-labs.hk";
locations."/munin/".alias = "/var/www/munin/";
2019-06-24 18:54:44 +08:00
locations."/munin".extraConfig = ''
auth_basic "Munin";
auth_basic_user_file /etc/nixos/secret/muninpasswd;
'';
2019-05-02 13:54:21 +08:00
locations."/homu/".proxyPass = "http://127.0.0.1:54856/";
};
"nixbld.m-labs.hk" = {
forceSSL = true;
2019-04-01 19:47:47 +08:00
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3000";
};
2019-07-19 16:23:47 +08:00
"conda.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/artiq-beta/" = {
alias = "${hydraWwwOutputs}/artiq-conda-channel-beta/";
2019-07-19 16:23:47 +08:00
extraConfig = ''
autoindex on;
index bogus_index_file;
'';
};
};
2019-03-31 23:51:06 +08:00
"git.m-labs.hk" = {
forceSSL = true;
2019-04-01 19:47:47 +08:00
useACMEHost = "nixbld.m-labs.hk";
2019-03-31 23:51:06 +08:00
locations."/".proxyPass = "http://127.0.0.1:3001";
extraConfig = ''
client_max_body_size 300M;
'';
2019-03-27 22:42:12 +08:00
};
2019-04-01 00:12:46 +08:00
"chat.m-labs.hk" = {
forceSSL = true;
2019-04-01 19:47:47 +08:00
useACMEHost = "nixbld.m-labs.hk";
2019-04-01 00:12:46 +08:00
locations."/".proxyPass = "http://127.0.0.1:8065";
2019-04-02 00:50:02 +08:00
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyPass = "http://127.0.0.1:8065";
locations."~ /api/v[0-9]+/(users/)?websocket$".proxyWebsockets = true;
2019-04-01 00:12:46 +08:00
};
"hooks.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".extraConfig = ''
include ${pkgs.nginx}/conf/uwsgi_params;
uwsgi_pass unix:${config.services.uwsgi.runDir}/uwsgi.sock;
'';
};
2019-05-21 16:08:54 +08:00
"forum.m-labs.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
2019-10-17 14:36:49 +08:00
root = "/var/www/flarum/public";
locations."~ \.php$".extraConfig = ''
fastcgi_pass unix:${config.services.phpfpm.pools.flarum.socket};
fastcgi_index index.php;
'';
extraConfig = ''
index index.php;
include /var/www/flarum/.nginx.conf;
'';
2019-05-21 16:08:54 +08:00
};
2019-10-17 15:17:42 +08:00
"perso.m-labs.hk" = {
addSSL = true;
useACMEHost = "nixbld.m-labs.hk";
root = "/var/www/perso";
};
2019-10-09 21:33:37 +08:00
"git.openhardware.hk" = {
forceSSL = true;
useACMEHost = "nixbld.m-labs.hk";
locations."/".proxyPass = "http://127.0.0.1:3002";
extraConfig = ''
client_max_body_size 300M;
'';
};
};
};
services.uwsgi = {
enable = true;
plugins = [ "python3" ];
instance = {
type = "emperor";
vassals = {
mattermostgithub = import ./mattermost-github-integration/uwsgi-config.nix { inherit config pkgs; };
};
2019-03-27 22:42:12 +08:00
};
};
2019-05-21 16:08:54 +08:00
services.mysql = {
enable = true;
package = pkgs.mariadb;
};
2019-09-17 17:22:43 +08:00
services.phpfpm.pools.flarum = {
user = "nobody";
settings = {
2019-09-18 14:23:14 +08:00
"listen.owner" = "nginx";
"listen.group" = "nginx";
"listen.mode" = "0600";
2019-09-17 17:22:43 +08:00
"pm" = "dynamic";
"pm.max_children" = 5;
"pm.start_servers" = 2;
"pm.min_spare_servers" = 1;
"pm.max_spare_servers" = 3;
"pm.max_requests" = 500;
};
};
2019-03-27 22:42:12 +08:00
2019-05-02 13:54:21 +08:00
services.homu = {
enable = true;
config = "/etc/nixos/secret/homu.toml";
};
2019-09-13 12:48:51 +08:00
mailserver = {
enable = true;
localDnsResolver = false; # conflicts with dnsmasq
# Some mail servers do reverse DNS lookups to filter spam.
# Getting a proper reverse DNS record from ISP is difficult, so use whatever already exists.
fqdn = "42-200-147-171.static.imsbiz.com";
domains = [ "nmigen.org" ];
loginAccounts = (import /etc/nixos/secret/email_accounts.nix);
2019-09-13 12:48:51 +08:00
certificateScheme = 3;
};
security.acme.certs."${config.mailserver.fqdn}".extraDomains = {
"mail.nmigen.org" = null;
};
2019-10-09 21:33:37 +08:00
containers.openhardwarehk = {
autoStart = true;
config =
{ config, pkgs, ... }:
{
services.gitea = {
enable = true;
httpPort = 3002;
rootUrl = "https://git.openhardware.hk/";
appName = "Open Hardware HK";
cookieSecure = true;
disableRegistration = true;
extraConfig =
''
[attachment]
ALLOWED_TYPES = */*
'';
};
};
};
2019-02-16 00:33:08 +08:00
# This value determines the NixOS release with which your system is to be
# compatible, in order to avoid breaking some software such as database
# servers. You should change this only after NixOS release notes say you
# should.
system.stateVersion = "18.09"; # Did you read the comment?
}