main.rs refactor to reduce length (#60)

Move command handling to command_handler.rs to shorten main.rs

Reviewed-on: M-Labs/thermostat#60
Co-authored-by: topquark12 <aw@m-labs.hk>
Co-committed-by: topquark12 <aw@m-labs.hk>
This commit is contained in:
topquark12 2021-06-07 10:07:05 +08:00 committed by sb10q
parent a5d8661b10
commit e6a5c31db6
2 changed files with 384 additions and 234 deletions

373
src/command_handler.rs Normal file
View File

@ -0,0 +1,373 @@
use smoltcp::socket::TcpSocket;
use log::{error, warn};
use core::fmt::Write;
use super::{
net,
command_parser::{
Ipv4Config,
Command,
ShowCommand,
CenterPoint,
PidParameter,
PwmPin,
ShParameter
},
leds::Leds,
ad7172,
CHANNEL_CONFIG_KEY,
channels::{
Channels,
CHANNELS
},
config::ChannelConfig,
dfu,
flash_store::FlashStore,
session::Session
};
use uom::{
si::{
f64::{
ElectricCurrent,
ElectricPotential,
ElectricalResistance,
ThermodynamicTemperature,
},
electric_current::ampere,
electric_potential::volt,
electrical_resistance::ohm,
thermodynamic_temperature::degree_celsius,
},
};
#[derive(Debug, Clone, PartialEq)]
pub enum Handler {
Handled,
CloseSocket,
NewIPV4(Ipv4Config),
Reset,
}
#[derive(Clone, Debug, PartialEq)]
pub enum Error {
ReportError,
PostFilterRateError,
FlashError
}
fn send_line(socket: &mut TcpSocket, data: &[u8]) -> bool {
let send_free = socket.send_capacity() - socket.send_queue();
if data.len() > send_free + 1 {
// Not enough buffer space, skip report for now,
// instead of sending incomplete line
warn!(
"TCP socket has only {}/{} needed {}",
send_free + 1, socket.send_capacity(), data.len(),
);
} else {
match socket.send_slice(&data) {
Ok(sent) if sent == data.len() => {
let _ = socket.send_slice(b"\n");
// success
return true
}
Ok(sent) =>
warn!("sent only {}/{} bytes", sent, data.len()),
Err(e) =>
error!("error sending line: {:?}", e),
}
}
// not success
false
}
impl Handler {
fn reporting(socket: &mut TcpSocket) -> Result<Handler, Error> {
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn show_report_mode(socket: &mut TcpSocket, session: &Session) -> Result<Handler, Error> {
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
Ok(Handler::Handled)
}
fn show_report(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.reports_json() {
Ok(buf) => {
send_line(socket, &buf[..]);
}
Err(e) => {
error!("unable to serialize report: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_pid(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.pid_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize pid summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_pwm(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.pwm_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize pwm summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_steinhart_hart(socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.steinhart_hart_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize steinhart-hart summaries: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_post_filter (socket: &mut TcpSocket, channels: &mut Channels) -> Result<Handler, Error> {
match channels.postfilter_summaries_json() {
Ok(buf) => {
send_line(socket, &buf);
}
Err(e) => {
error!("unable to serialize postfilter summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::ReportError);
}
}
Ok(Handler::Handled)
}
fn show_ipv4 (socket: &mut TcpSocket, ipv4_config: &mut Ipv4Config) -> Result<Handler, Error> {
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
let _ = writeln!(socket, "}}");
Ok(Handler::Handled)
}
fn engage_pid (socket: &mut TcpSocket, channels: &mut Channels, leds: &mut Leds, channel: usize) -> Result<Handler, Error> {
channels.channel_state(channel).pid_engaged = true;
leds.g3.on();
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_pwm (socket: &mut TcpSocket, channels: &mut Channels, leds: &mut Leds, channel: usize, pin: PwmPin, value: f64) -> Result<Handler, Error> {
match pin {
PwmPin::ISet => {
channels.channel_state(channel).pid_engaged = false;
leds.g3.off();
let current = ElectricCurrent::new::<ampere>(value);
channels.set_i(channel, current);
channels.power_up(channel);
}
PwmPin::MaxV => {
let voltage = ElectricPotential::new::<volt>(value);
channels.set_max_v(channel, voltage);
}
PwmPin::MaxIPos => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_pos(channel, current);
}
PwmPin::MaxINeg => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_neg(channel, current);
}
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_center_point(socket: &mut TcpSocket, channels: &mut Channels, channel: usize, center: CenterPoint) -> Result<Handler, Error> {
let i_tec = channels.get_i(channel);
let state = channels.channel_state(channel);
state.center = center;
if !state.pid_engaged {
channels.set_i(channel, i_tec);
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_pid (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: PidParameter, value: f64) -> Result<Handler, Error> {
let pid = &mut channels.channel_state(channel).pid;
use super::command_parser::PidParameter::*;
match parameter {
Target =>
pid.target = value,
KP =>
pid.parameters.kp = value as f32,
KI =>
pid.update_ki(value as f32),
KD =>
pid.parameters.kd = value as f32,
OutputMin =>
pid.parameters.output_min = value as f32,
OutputMax =>
pid.parameters.output_max = value as f32,
IntegralMin =>
pid.parameters.integral_min = value as f32,
IntegralMax =>
pid.parameters.integral_max = value as f32,
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_steinhart_hart (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, parameter: ShParameter, value: f64) -> Result<Handler, Error> {
let sh = &mut channels.channel_state(channel).sh;
use super::command_parser::ShParameter::*;
match parameter {
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
B => sh.b = value,
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
}
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn reset_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize) -> Result<Handler, Error> {
channels.adc.set_postfilter(channel as u8, None).unwrap();
send_line(socket, b"{}");
Ok(Handler::Handled)
}
fn set_post_filter (socket: &mut TcpSocket, channels: &mut Channels, channel: usize, rate: f32) -> Result<Handler, Error> {
let filter = ad7172::PostFilter::closest(rate);
match filter {
Some(filter) => {
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
send_line(socket, b"{}");
}
None => {
error!("unable to choose postfilter for rate {:.3}", rate);
send_line(socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
return Err(Error::PostFilterRateError);
}
}
Ok(Handler::Handled)
}
fn load_channel (socket: &mut TcpSocket, channels: &mut Channels, store: &mut FlashStore, channel: Option<usize>) -> Result<Handler, Error> {
for c in 0..CHANNELS {
if channel.is_none() || channel == Some(c) {
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
Ok(Some(config)) => {
config.apply(channels, c);
send_line(socket, b"{}");
}
Ok(None) => {
error!("flash config not found");
send_line(socket, b"{{\"error\": \"flash config not found\"}}");
}
Err(e) => {
error!("unable to load config from flash: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::FlashError);
}
}
}
}
Ok(Handler::Handled)
}
fn save_channel (socket: &mut TcpSocket, channels: &mut Channels, channel: Option<usize>, store: &mut FlashStore) -> Result<Handler, Error> {
for c in 0..CHANNELS {
let mut store_value_buf = [0u8; 256];
if channel.is_none() || channel == Some(c) {
let config = ChannelConfig::new(channels, c);
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
Ok(()) => {
send_line(socket, b"{}");
}
Err(e) => {
error!("unable to save channel {} config to flash: {:?}", c, e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
return Err(Error::FlashError);
}
}
}
}
Ok(Handler::Handled)
}
fn set_ipv4 (socket: &mut TcpSocket, store: &mut FlashStore, config: Ipv4Config) -> Result<Handler, Error> {
let _ = store
.write_value("ipv4", &config, [0; 16])
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
let new_ipv4_config = Some(config);
send_line(socket, b"{}");
Ok(Handler::NewIPV4(new_ipv4_config.unwrap()))
}
fn reset (channels: &mut Channels) -> Result<Handler, Error> {
for i in 0..CHANNELS {
channels.power_down(i);
}
// should_reset = true;
Ok(Handler::Reset)
}
fn dfu (channels: &mut Channels) -> Result<Handler, Error> {
for i in 0..CHANNELS {
channels.power_down(i);
}
unsafe {
dfu::set_dfu_trigger();
}
// should_reset = true;
Ok(Handler::Reset)
}
pub fn handle_command (command: Command, socket: &mut TcpSocket, channels: &mut Channels, session: &Session, leds: &mut Leds, store: &mut FlashStore, ipv4_config: &mut Ipv4Config) -> Result<Self, Error> {
match command {
Command::Quit => Ok(Handler::CloseSocket),
Command::Reporting(_reporting) => Handler::reporting(socket),
Command::Show(ShowCommand::Reporting) => Handler::show_report_mode(socket, session),
Command::Show(ShowCommand::Input) => Handler::show_report(socket, channels),
Command::Show(ShowCommand::Pid) => Handler::show_pid(socket, channels),
Command::Show(ShowCommand::Pwm) => Handler::show_pwm(socket, channels),
Command::Show(ShowCommand::SteinhartHart) => Handler::show_steinhart_hart(socket, channels),
Command::Show(ShowCommand::PostFilter) => Handler::show_post_filter(socket, channels),
Command::Show(ShowCommand::Ipv4) => Handler::show_ipv4(socket, ipv4_config),
Command::PwmPid { channel } => Handler::engage_pid(socket, channels, leds, channel),
Command::Pwm { channel, pin, value } => Handler::set_pwm(socket, channels, leds, channel, pin, value),
Command::CenterPoint { channel, center } => Handler::set_center_point(socket, channels, channel, center),
Command::Pid { channel, parameter, value } => Handler::set_pid(socket, channels, channel, parameter, value),
Command::SteinhartHart { channel, parameter, value } => Handler::set_steinhart_hart(socket, channels, channel, parameter, value),
Command::PostFilter { channel, rate: None } => Handler::reset_post_filter(socket, channels, channel),
Command::PostFilter { channel, rate: Some(rate) } => Handler::set_post_filter(socket, channels, channel, rate),
Command::Load { channel } => Handler::load_channel(socket, channels, store, channel),
Command::Save { channel } => Handler::save_channel(socket, channels, channel, store),
Command::Ipv4(config) => Handler::set_ipv4(socket, store, config),
Command::Reset => Handler::reset(channels),
Command::Dfu => Handler::dfu(channels)
}
}
}

View File

@ -11,7 +11,6 @@ use panic_semihosting as _;
use log::{error, info, warn}; use log::{error, info, warn};
use core::fmt::Write;
use cortex_m::asm::wfi; use cortex_m::asm::wfi;
use cortex_m_rt::entry; use cortex_m_rt::entry;
use stm32f4xx_hal::{ use stm32f4xx_hal::{
@ -26,20 +25,6 @@ use smoltcp::{
socket::TcpSocket, socket::TcpSocket,
wire::EthernetAddress, wire::EthernetAddress,
}; };
use uom::{
si::{
f64::{
ElectricCurrent,
ElectricPotential,
ElectricalResistance,
ThermodynamicTemperature,
},
electric_current::ampere,
electric_potential::volt,
electrical_resistance::ohm,
thermodynamic_temperature::degree_celsius,
},
};
mod init_log; mod init_log;
use init_log::init_log; use init_log::init_log;
@ -55,7 +40,7 @@ use server::Server;
mod session; mod session;
use session::{Session, SessionInput}; use session::{Session, SessionInput};
mod command_parser; mod command_parser;
use command_parser::{Command, Ipv4Config, PwmPin, ShowCommand}; use command_parser::Ipv4Config;
mod timer; mod timer;
mod pid; mod pid;
mod steinhart_hart; mod steinhart_hart;
@ -67,6 +52,8 @@ mod config;
use config::ChannelConfig; use config::ChannelConfig;
mod flash_store; mod flash_store;
mod dfu; mod dfu;
mod command_handler;
use command_handler::Handler;
const HSE: MegaHertz = MegaHertz(8); const HSE: MegaHertz = MegaHertz(8);
#[cfg(not(feature = "semihosting"))] #[cfg(not(feature = "semihosting"))]
@ -149,7 +136,7 @@ fn main() -> ! {
usb::State::setup(usb); usb::State::setup(usb);
let mut store = flash_store::store(dp.FLASH); let mut store = flash_store::store(dp.FLASH);
let mut store_value_buf = [0u8; 256];
let mut channels = Channels::new(pins); let mut channels = Channels::new(pins);
for c in 0..CHANNELS { for c in 0..CHANNELS {
@ -218,223 +205,13 @@ fn main() -> ! {
// socket RX ring buffer wraps around, or when the command is sent as seperate TCP packets etc. // socket RX ring buffer wraps around, or when the command is sent as seperate TCP packets etc.
// Do nothing and feed more data to the line reader in the next loop cycle. // Do nothing and feed more data to the line reader in the next loop cycle.
Ok(SessionInput::Nothing) => {} Ok(SessionInput::Nothing) => {}
Ok(SessionInput::Command(command)) => match command { Ok(SessionInput::Command(command)) => {
Command::Quit => match Handler::handle_command(command, &mut socket, &mut channels, session, &mut leds, &mut store, &mut ipv4_config) {
socket.close(), Ok(Handler::NewIPV4(ip)) => new_ipv4_config = Some(ip),
Command::Reporting(_reporting) => { Ok(Handler::Handled) => {},
// handled by session Ok(Handler::CloseSocket) => socket.close(),
send_line(&mut socket, b"{}"); Ok(Handler::Reset) => should_reset = true,
} Err(_) => {},
Command::Show(ShowCommand::Reporting) => {
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
}
Command::Show(ShowCommand::Input) => {
match channels.reports_json() {
Ok(buf) => {
send_line(&mut socket, &buf[..]);
}
Err(e) => {
error!("unable to serialize report: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
Command::Show(ShowCommand::Pid) => {
match channels.pid_summaries_json() {
Ok(buf) => {
send_line(&mut socket, &buf);
}
Err(e) => {
error!("unable to serialize pid summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
Command::Show(ShowCommand::Pwm) => {
match channels.pwm_summaries_json() {
Ok(buf) => {
send_line(&mut socket, &buf);
}
Err(e) => {
error!("unable to serialize pwm summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
Command::Show(ShowCommand::SteinhartHart) => {
match channels.steinhart_hart_summaries_json() {
Ok(buf) => {
send_line(&mut socket, &buf);
}
Err(e) => {
error!("unable to serialize steinhart-hart summaries: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
Command::Show(ShowCommand::PostFilter) => {
match channels.postfilter_summaries_json() {
Ok(buf) => {
send_line(&mut socket, &buf);
}
Err(e) => {
error!("unable to serialize postfilter summary: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
Command::Show(ShowCommand::Ipv4) => {
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
let _ = writeln!(socket, "}}");
}
Command::PwmPid { channel } => {
channels.channel_state(channel).pid_engaged = true;
leds.g3.on();
send_line(&mut socket, b"{}");
}
Command::Pwm { channel, pin, value } => {
match pin {
PwmPin::ISet => {
channels.channel_state(channel).pid_engaged = false;
leds.g3.off();
let current = ElectricCurrent::new::<ampere>(value);
channels.set_i(channel, current);
channels.power_up(channel);
}
PwmPin::MaxV => {
let voltage = ElectricPotential::new::<volt>(value);
channels.set_max_v(channel, voltage);
}
PwmPin::MaxIPos => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_pos(channel, current);
}
PwmPin::MaxINeg => {
let current = ElectricCurrent::new::<ampere>(value);
channels.set_max_i_neg(channel, current);
}
}
send_line(&mut socket, b"{}");
}
Command::CenterPoint { channel, center } => {
let i_tec = channels.get_i(channel);
let state = channels.channel_state(channel);
state.center = center;
if !state.pid_engaged {
channels.set_i(channel, i_tec);
}
send_line(&mut socket, b"{}");
}
Command::Pid { channel, parameter, value } => {
let pid = &mut channels.channel_state(channel).pid;
use command_parser::PidParameter::*;
match parameter {
Target =>
pid.target = value,
KP =>
pid.parameters.kp = value as f32,
KI =>
pid.update_ki(value as f32),
KD =>
pid.parameters.kd = value as f32,
OutputMin =>
pid.parameters.output_min = value as f32,
OutputMax =>
pid.parameters.output_max = value as f32,
IntegralMin =>
pid.parameters.integral_min = value as f32,
IntegralMax =>
pid.parameters.integral_max = value as f32,
}
send_line(&mut socket, b"{}");
}
Command::SteinhartHart { channel, parameter, value } => {
let sh = &mut channels.channel_state(channel).sh;
use command_parser::ShParameter::*;
match parameter {
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
B => sh.b = value,
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
}
send_line(&mut socket, b"{}");
}
Command::PostFilter { channel, rate: None } => {
channels.adc.set_postfilter(channel as u8, None).unwrap();
send_line(&mut socket, b"{}");
}
Command::PostFilter { channel, rate: Some(rate) } => {
let filter = ad7172::PostFilter::closest(rate);
match filter {
Some(filter) => {
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
send_line(&mut socket, b"{}");
}
None => {
error!("unable to choose postfilter for rate {:.3}", rate);
send_line(&mut socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
}
}
}
Command::Load { channel } => {
for c in 0..CHANNELS {
if channel.is_none() || channel == Some(c) {
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
Ok(Some(config)) => {
config.apply(&mut channels, c);
send_line(&mut socket, b"{}");
}
Ok(None) => {
error!("flash config not found");
send_line(&mut socket, b"{{\"error\": \"flash config not found\"}}");
}
Err(e) => {
error!("unable to load config from flash: {:?}", e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
}
}
Command::Save { channel } => {
for c in 0..CHANNELS {
if channel.is_none() || channel == Some(c) {
let config = ChannelConfig::new(&mut channels, c);
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
Ok(()) => {
send_line(&mut socket, b"{}");
}
Err(e) => {
error!("unable to save channel {} config to flash: {:?}", c, e);
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
}
}
}
}
}
Command::Ipv4(config) => {
let _ = store
.write_value("ipv4", &config, [0; 16])
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
new_ipv4_config = Some(config);
send_line(&mut socket, b"{}");
}
Command::Reset => {
for i in 0..CHANNELS {
channels.power_down(i);
}
should_reset = true;
}
Command::Dfu => {
for i in 0..CHANNELS {
channels.power_down(i);
}
unsafe {
dfu::set_dfu_trigger();
}
should_reset = true;
} }
} }
Ok(SessionInput::Error(e)) => { Ok(SessionInput::Error(e)) => {