forked from M-Labs/thermostat
Reset all TCP sockets before MCU reset (#53)
Co-Authored-By: topquark12 <aw@m-labs.hk> Co-Committed-By: topquark12 <aw@m-labs.hk>
This commit is contained in:
parent
6b9d61737e
commit
7cb0ed70be
513
src/main.rs
513
src/main.rs
@ -186,6 +186,7 @@ fn main() -> ! {
|
||||
net::run(clocks, dp.ETHERNET_MAC, dp.ETHERNET_DMA, eth_pins, hwaddr, ipv4_config.clone(), |iface| {
|
||||
Server::<Session>::run(iface, |server| {
|
||||
leds.r1.off();
|
||||
let mut should_reset = false;
|
||||
|
||||
loop {
|
||||
let mut new_ipv4_config = None;
|
||||
@ -202,261 +203,275 @@ fn main() -> ! {
|
||||
warn!("poll: {:?}", e);
|
||||
});
|
||||
|
||||
// TCP protocol handling
|
||||
server.for_each(|mut socket, session| {
|
||||
if ! socket.is_active() {
|
||||
let _ = socket.listen(TCP_PORT);
|
||||
session.reset();
|
||||
} else if socket.may_send() && !socket.may_recv() {
|
||||
socket.close()
|
||||
} else if socket.can_send() && socket.can_recv() {
|
||||
match socket.recv(|buf| session.feed(buf)) {
|
||||
Ok(SessionInput::Nothing) => {
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Ok(SessionInput::Command(command)) => match command {
|
||||
Command::Quit =>
|
||||
if ! should_reset {
|
||||
// TCP protocol handling
|
||||
server.for_each(|mut socket, session| {
|
||||
if ! socket.is_active() {
|
||||
let _ = socket.listen(TCP_PORT);
|
||||
session.reset();
|
||||
} else if socket.may_send() && !socket.may_recv() {
|
||||
socket.close()
|
||||
} else if socket.can_send() && socket.can_recv() {
|
||||
match socket.recv(|buf| session.feed(buf)) {
|
||||
Ok(SessionInput::Nothing) => {
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Ok(SessionInput::Command(command)) => match command {
|
||||
Command::Quit =>
|
||||
socket.close(),
|
||||
Command::Reporting(_reporting) => {
|
||||
// handled by session
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Show(ShowCommand::Reporting) => {
|
||||
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
|
||||
}
|
||||
Command::Show(ShowCommand::Input) => {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf[..]);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pid) => {
|
||||
match channels.pid_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pid summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pwm) => {
|
||||
match channels.pwm_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pwm summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::SteinhartHart) => {
|
||||
match channels.steinhart_hart_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize steinhart-hart summaries: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::PostFilter) => {
|
||||
match channels.postfilter_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize postfilter summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Ipv4) => {
|
||||
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
|
||||
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
|
||||
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
|
||||
let _ = writeln!(socket, "}}");
|
||||
}
|
||||
Command::PwmPid { channel } => {
|
||||
channels.channel_state(channel).pid_engaged = true;
|
||||
leds.g3.on();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pwm { channel, pin, value } => {
|
||||
match pin {
|
||||
PwmPin::ISet => {
|
||||
channels.channel_state(channel).pid_engaged = false;
|
||||
leds.g3.off();
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_i(channel, current);
|
||||
channels.power_up(channel);
|
||||
}
|
||||
PwmPin::MaxV => {
|
||||
let voltage = ElectricPotential::new::<volt>(value);
|
||||
channels.set_max_v(channel, voltage);
|
||||
}
|
||||
PwmPin::MaxIPos => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_pos(channel, current);
|
||||
}
|
||||
PwmPin::MaxINeg => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_neg(channel, current);
|
||||
}
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::CenterPoint { channel, center } => {
|
||||
let i_tec = channels.get_i(channel);
|
||||
let state = channels.channel_state(channel);
|
||||
state.center = center;
|
||||
if !state.pid_engaged {
|
||||
channels.set_i(channel, i_tec);
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pid { channel, parameter, value } => {
|
||||
let pid = &mut channels.channel_state(channel).pid;
|
||||
use command_parser::PidParameter::*;
|
||||
match parameter {
|
||||
Target =>
|
||||
pid.target = value,
|
||||
KP =>
|
||||
pid.parameters.kp = value as f32,
|
||||
KI =>
|
||||
pid.update_ki(value as f32),
|
||||
KD =>
|
||||
pid.parameters.kd = value as f32,
|
||||
OutputMin =>
|
||||
pid.parameters.output_min = value as f32,
|
||||
OutputMax =>
|
||||
pid.parameters.output_max = value as f32,
|
||||
IntegralMin =>
|
||||
pid.parameters.integral_min = value as f32,
|
||||
IntegralMax =>
|
||||
pid.parameters.integral_max = value as f32,
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::SteinhartHart { channel, parameter, value } => {
|
||||
let sh = &mut channels.channel_state(channel).sh;
|
||||
use command_parser::ShParameter::*;
|
||||
match parameter {
|
||||
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
|
||||
B => sh.b = value,
|
||||
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: None } => {
|
||||
channels.adc.set_postfilter(channel as u8, None).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: Some(rate) } => {
|
||||
let filter = ad7172::PostFilter::closest(rate);
|
||||
match filter {
|
||||
Some(filter) => {
|
||||
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
None => {
|
||||
error!("unable to choose postfilter for rate {:.3}", rate);
|
||||
send_line(&mut socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Load { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
|
||||
Ok(Some(config)) => {
|
||||
config.apply(&mut channels, c);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Ok(None) => {
|
||||
error!("flash config not found");
|
||||
send_line(&mut socket, b"{{\"error\": \"flash config not found\"}}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to load config from flash: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Save { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
let config = ChannelConfig::new(&mut channels, c);
|
||||
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
|
||||
Ok(()) => {
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to save channel {} config to flash: {:?}", c, e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Ipv4(config) => {
|
||||
let _ = store
|
||||
.write_value("ipv4", &config, [0; 16])
|
||||
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
|
||||
new_ipv4_config = Some(config);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Reset => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
should_reset = true;
|
||||
}
|
||||
Command::Dfu => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
unsafe {
|
||||
dfu::set_dfu_trigger();
|
||||
}
|
||||
should_reset = true;
|
||||
}
|
||||
}
|
||||
Ok(SessionInput::Error(e)) => {
|
||||
error!("session input: {:?}", e);
|
||||
send_line(&mut socket, b"{ \"error\": \"invalid input\" }");
|
||||
}
|
||||
Err(_) =>
|
||||
socket.close(),
|
||||
Command::Reporting(_reporting) => {
|
||||
// handled by session
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Show(ShowCommand::Reporting) => {
|
||||
let _ = writeln!(socket, "{{ \"report\": {:?} }}", session.reporting());
|
||||
}
|
||||
Command::Show(ShowCommand::Input) => {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf[..]);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pid) => {
|
||||
match channels.pid_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pid summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Pwm) => {
|
||||
match channels.pwm_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize pwm summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::SteinhartHart) => {
|
||||
match channels.steinhart_hart_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize steinhart-hart summaries: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::PostFilter) => {
|
||||
match channels.postfilter_summaries_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize postfilter summary: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Show(ShowCommand::Ipv4) => {
|
||||
let (cidr, gateway) = net::split_ipv4_config(ipv4_config.clone());
|
||||
let _ = write!(socket, "{{\"addr\":\"{}\"", cidr);
|
||||
gateway.map(|gateway| write!(socket, ",\"gateway\":\"{}\"", gateway));
|
||||
let _ = writeln!(socket, "}}");
|
||||
}
|
||||
Command::PwmPid { channel } => {
|
||||
channels.channel_state(channel).pid_engaged = true;
|
||||
leds.g3.on();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pwm { channel, pin, value } => {
|
||||
match pin {
|
||||
PwmPin::ISet => {
|
||||
channels.channel_state(channel).pid_engaged = false;
|
||||
leds.g3.off();
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_i(channel, current);
|
||||
channels.power_up(channel);
|
||||
}
|
||||
PwmPin::MaxV => {
|
||||
let voltage = ElectricPotential::new::<volt>(value);
|
||||
channels.set_max_v(channel, voltage);
|
||||
}
|
||||
PwmPin::MaxIPos => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_pos(channel, current);
|
||||
}
|
||||
PwmPin::MaxINeg => {
|
||||
let current = ElectricCurrent::new::<ampere>(value);
|
||||
channels.set_max_i_neg(channel, current);
|
||||
}
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::CenterPoint { channel, center } => {
|
||||
let i_tec = channels.get_i(channel);
|
||||
let state = channels.channel_state(channel);
|
||||
state.center = center;
|
||||
if !state.pid_engaged {
|
||||
channels.set_i(channel, i_tec);
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Pid { channel, parameter, value } => {
|
||||
let pid = &mut channels.channel_state(channel).pid;
|
||||
use command_parser::PidParameter::*;
|
||||
match parameter {
|
||||
Target =>
|
||||
pid.target = value,
|
||||
KP =>
|
||||
pid.parameters.kp = value as f32,
|
||||
KI =>
|
||||
pid.update_ki(value as f32),
|
||||
KD =>
|
||||
pid.parameters.kd = value as f32,
|
||||
OutputMin =>
|
||||
pid.parameters.output_min = value as f32,
|
||||
OutputMax =>
|
||||
pid.parameters.output_max = value as f32,
|
||||
IntegralMin =>
|
||||
pid.parameters.integral_min = value as f32,
|
||||
IntegralMax =>
|
||||
pid.parameters.integral_max = value as f32,
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::SteinhartHart { channel, parameter, value } => {
|
||||
let sh = &mut channels.channel_state(channel).sh;
|
||||
use command_parser::ShParameter::*;
|
||||
match parameter {
|
||||
T0 => sh.t0 = ThermodynamicTemperature::new::<degree_celsius>(value),
|
||||
B => sh.b = value,
|
||||
R0 => sh.r0 = ElectricalResistance::new::<ohm>(value),
|
||||
}
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: None } => {
|
||||
channels.adc.set_postfilter(channel as u8, None).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::PostFilter { channel, rate: Some(rate) } => {
|
||||
let filter = ad7172::PostFilter::closest(rate);
|
||||
match filter {
|
||||
Some(filter) => {
|
||||
channels.adc.set_postfilter(channel as u8, Some(filter)).unwrap();
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
None => {
|
||||
error!("unable to choose postfilter for rate {:.3}", rate);
|
||||
send_line(&mut socket, b"{{\"error\": \"unable to choose postfilter rate\"}}");
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Load { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
match store.read_value::<ChannelConfig>(CHANNEL_CONFIG_KEY[c]) {
|
||||
Ok(Some(config)) => {
|
||||
config.apply(&mut channels, c);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Ok(None) => {
|
||||
error!("flash config not found");
|
||||
send_line(&mut socket, b"{{\"error\": \"flash config not found\"}}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to load config from flash: {:?}", e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Save { channel } => {
|
||||
for c in 0..CHANNELS {
|
||||
if channel.is_none() || channel == Some(c) {
|
||||
let config = ChannelConfig::new(&mut channels, c);
|
||||
match store.write_value(CHANNEL_CONFIG_KEY[c], &config, &mut store_value_buf) {
|
||||
Ok(()) => {
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to save channel {} config to flash: {:?}", c, e);
|
||||
let _ = writeln!(socket, "{{\"error\":\"{:?}\"}}", e);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
Command::Ipv4(config) => {
|
||||
let _ = store
|
||||
.write_value("ipv4", &config, [0; 16])
|
||||
.map_err(|e| error!("unable to save ipv4 config to flash: {:?}", e));
|
||||
new_ipv4_config = Some(config);
|
||||
send_line(&mut socket, b"{}");
|
||||
}
|
||||
Command::Reset => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
|
||||
SCB::sys_reset();
|
||||
}
|
||||
Command::Dfu => {
|
||||
for i in 0..CHANNELS {
|
||||
channels.power_down(i);
|
||||
}
|
||||
unsafe {
|
||||
dfu::set_dfu_trigger();
|
||||
}
|
||||
|
||||
SCB::sys_reset();
|
||||
}
|
||||
}
|
||||
Ok(SessionInput::Error(e)) => {
|
||||
error!("session input: {:?}", e);
|
||||
send_line(&mut socket, b"{ \"error\": \"invalid input\" }");
|
||||
}
|
||||
Err(_) =>
|
||||
socket.close(),
|
||||
}
|
||||
} else if socket.can_send() {
|
||||
if let Some(channel) = session.is_report_pending() {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf[..]);
|
||||
session.mark_report_sent(channel);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
} else if socket.can_send() {
|
||||
if let Some(channel) = session.is_report_pending() {
|
||||
match channels.reports_json() {
|
||||
Ok(buf) => {
|
||||
send_line(&mut socket, &buf[..]);
|
||||
session.mark_report_sent(channel);
|
||||
}
|
||||
Err(e) => {
|
||||
error!("unable to serialize report: {:?}", e);
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
});
|
||||
});
|
||||
} else {
|
||||
// Should reset, close all TCP sockets.
|
||||
let mut any_socket_alive = false;
|
||||
server.for_each(|mut socket, _| {
|
||||
if socket.is_active() {
|
||||
socket.abort();
|
||||
any_socket_alive = true;
|
||||
}
|
||||
});
|
||||
// Must let loop run for one more cycle to poll server for RST to be sent,
|
||||
// this makes sure system does not reset right after socket.abort() is called.
|
||||
if !any_socket_alive {
|
||||
SCB::sys_reset();
|
||||
}
|
||||
}
|
||||
|
||||
// Apply new IPv4 address/gateway
|
||||
new_ipv4_config.take()
|
||||
|
||||
Loading…
Reference in New Issue
Block a user