From f3858552b6a9c7ecfb404579f21c149f4593fe53 Mon Sep 17 00:00:00 2001
From: occheung <dc@m-labs.hk>
Date: Mon, 5 Sep 2022 11:55:31 +0800
Subject: [PATCH] 2245: remove absolute maximum specs

Closes #50
---
 2245.tex | 29 ++++-------------------------
 1 file changed, 4 insertions(+), 25 deletions(-)

diff --git a/2245.tex b/2245.tex
index 5aa7e22..6dbf8f6 100644
--- a/2245.tex
+++ b/2245.tex
@@ -344,27 +344,6 @@ Only shielded Ethernet Cat-6 cables should be connected.
 
 Information in this section is based on the datasheet of the repeaters IC (FIN1101K8X\footnote{\label{repeaters}https://www.onsemi.com/pdf/datasheet/fin1101-d.pdf}).
 
-The Absolute Maximum Ratings are those values beyond which damage to the device may occur.
-Other specifications should be met without exception.
-
-\begin{table}[h]
-\begin{threeparttable}
-\caption{Absolute Maximum Ratings}
-\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
-    \thickhline
-    \textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
-    \textbf{Unit} & \textbf{Conditions} \\
-    \hline
-    LVDS DC input voltage & $V_{IN}$ & -0.5 & & 4.6 & V \\
-    \hline
-    LVDS DC output voltage & $V_{OUT}$ & -0.5 & & 4.6 & V \\
-    \hline
-    Continuous Short Circuit Current & $I_{OSD}$ & & 10 & & mA \\
-    \thickhline
-\end{tabularx}
-\end{threeparttable}
-\end{table}
-
 \begin{table}[h]
 \begin{threeparttable}
 \caption{Recommended Input Voltage}
@@ -376,6 +355,10 @@ Other specifications should be met without exception.
     Magnitude of differential input & $|V_{ID}|$ & 0.1 & & 3.3 & V \\
     \hline
     Common mode input & $V_{IC}$ & $|V_{ID}|/2$ & & $3.3-|V_{ID}|/2$ & V \\
+    \hline
+    Differential input threshold HIGH & $V_{TH}$ & & & 100 & mV & \\
+    \hline
+    Differential input threshold LOW & $V_{TL}$ & -100 & & & mV & \\
     \thickhline
 \end{tabularx}
 \end{threeparttable}
@@ -393,10 +376,6 @@ All typical values of DC specifications are at $T_A = 25\degree C$.
     \textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
     \textbf{Unit} & \textbf{Conditions} \\
     \hline
-    Differential input threshold HIGH & $V_{TH}$ & & & 100 & mV & \\
-    \hline
-    Differential input threshold LOW & $V_{TL}$ & -100 & & & mV & \\
-    \hline
     Output differentiual Voltage & $V_{OD}$ & 250 & 330 & 450 & mV & \multirow{4}{*}{With 100$\Omega$ load.} \\
     \cline{0-5}
     $|V_{OD}|$ change (LOW-to-HIGH) & $\Delta V_{OD}$ & & & 25 & mV & \\