forked from sinara-hw/datasheets
2245: init
This commit is contained in:
parent
b583eef5f6
commit
12c0114189
544
2245.tex
Normal file
544
2245.tex
Normal file
@ -0,0 +1,544 @@
|
||||
\documentclass[10pt]{datasheet}
|
||||
\usepackage{palatino}
|
||||
\usepackage{textgreek}
|
||||
\usepackage{minted}
|
||||
\usepackage{tcolorbox}
|
||||
\usepackage{etoolbox}
|
||||
\BeforeBeginEnvironment{minted}{\begin{tcolorbox}[colback=white]}%
|
||||
\AfterEndEnvironment{minted}{\end{tcolorbox}}%
|
||||
|
||||
\usepackage[justification=centering]{caption}
|
||||
|
||||
\usepackage[utf8]{inputenc}
|
||||
\usepackage[english]{babel}
|
||||
\usepackage[english]{isodate}
|
||||
|
||||
\usepackage{graphicx}
|
||||
\usepackage{subfig}
|
||||
|
||||
\usepackage{tikz}
|
||||
\usepackage{pgfplots}
|
||||
\usepackage{circuitikz}
|
||||
\usetikzlibrary{calc}
|
||||
\usetikzlibrary{fit,backgrounds}
|
||||
|
||||
\title{2245 LVDS-TTL}
|
||||
\author{M-Labs Limited}
|
||||
\date{December 2021}
|
||||
\revision{Revision 1}
|
||||
\companylogo{\includegraphics[height=0.73in]{artiq_sinara.pdf}}
|
||||
|
||||
\begin{document}
|
||||
\maketitle
|
||||
|
||||
\section{Features}
|
||||
|
||||
\begin{itemize}
|
||||
\item{16 LVDS channels.}
|
||||
\item{Input and output capable.}
|
||||
\item{No galvanic isolation.}
|
||||
\item{High speed and low jitter.}
|
||||
\item{RJ45 connectors.}
|
||||
\end{itemize}
|
||||
|
||||
\section{Applications}
|
||||
|
||||
\begin{itemize}
|
||||
\item{Photon counting.}
|
||||
\item{External equipment trigger.}
|
||||
\item{Optical shutter control.}
|
||||
\item{Serial communication to remote devices.}
|
||||
\end{itemize}
|
||||
|
||||
\section{General Description}
|
||||
The 2245 LVDS-TTL card is a 4hp EEM module.
|
||||
It adds general-purpose digital I/O capabilities to carrier cards such as 1124 Kasli and 1125 Kasli-SoC.
|
||||
|
||||
Each EEM connection provides eight digital channels each.
|
||||
Each RJ45 connector exposes four digital channels.
|
||||
The direction (input or output) of each channel can be selected using DIP switches.
|
||||
Outputs are intended to drive 100\textOmega~loads, inputs are 100\textOmega~terminated.
|
||||
This card can achieve higher speed and lower jitter than the isolated 2118/2128 BNC/SMA-TTL cards.
|
||||
Only shielded Ethernet Cat-6 cables should be connected.
|
||||
|
||||
|
||||
% Switch to next column
|
||||
\vfill\break
|
||||
|
||||
\newcommand*{\MyLabel}[3][2cm]{\parbox{#1}{\centering #2 \\ #3}}
|
||||
\newcommand*{\MymyLabel}[3][4cm]{\parbox{#1}{\centering #2 \\ #3}}
|
||||
|
||||
\begin{figure}[h]
|
||||
\centering
|
||||
\scalebox{0.88}{
|
||||
\begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]
|
||||
|
||||
% RJ45 Connectors
|
||||
\draw (0, 2.8) node[twoportshape, t={\MyLabel{RJ45}{CH 0-3}}, circuitikz/bipoles/twoport/width=1.4, scale=0.5, rotate=-90] (eth0) {};
|
||||
\draw (0, 1.0) node[twoportshape, t={\MyLabel{RJ45}{CH 4-7}}, circuitikz/bipoles/twoport/width=1.4, scale=0.5, rotate=-90] (eth1) {};
|
||||
\draw (0, -1.0) node[twoportshape, t={\MyLabel{RJ45}{CH 8-11}}, circuitikz/bipoles/twoport/width=1.4, scale=0.5, rotate=-90] (eth2) {};
|
||||
\draw (0, -2.8) node[twoportshape, t={\MyLabel{RJ45}{CH 12-15}}, circuitikz/bipoles/twoport/width=1.4, scale=0.5, rotate=-90] (eth3) {};
|
||||
|
||||
% Repeaters for channels
|
||||
|
||||
% Channel 7 repeaters
|
||||
\draw (1.8, 0.4) node[twoportshape, t={\MyLabel{CH 7}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep7) {};
|
||||
|
||||
% Omission dots
|
||||
\node at (1.8, 0.8)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, 1.0)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, 1.2)[circle,fill,inner sep=0.7pt]{};
|
||||
|
||||
% Channel 4 repeaters
|
||||
\draw (1.8, 1.6) node[twoportshape, t={\MyLabel{CH 4}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep4) {};
|
||||
|
||||
% Channel 3 repeaters
|
||||
\draw (1.8, 2.2) node[twoportshape, t={\MyLabel{CH 3}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep3) {};
|
||||
|
||||
% Omission dots
|
||||
\node at (1.8, 2.6)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, 2.8)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, 3.0)[circle,fill,inner sep=0.7pt]{};
|
||||
|
||||
% Channel 0 repeaters
|
||||
\draw (1.8, 3.4) node[twoportshape, t={\MyLabel{CH 0}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep0) {};
|
||||
|
||||
% Channel 8 repeaters
|
||||
\draw (1.8, -0.4) node[twoportshape, t={\MyLabel{CH 8}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep8) {};
|
||||
|
||||
% Omission dots
|
||||
\node at (1.8, -0.8)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, -1.0)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, -1.2)[circle,fill,inner sep=0.7pt]{};
|
||||
|
||||
% Channel 11 repeaters
|
||||
\draw (1.8, -1.6) node[twoportshape, t={\MyLabel{CH 11}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep11) {};
|
||||
|
||||
% Channel 12 repeaters
|
||||
\draw (1.8, -2.2) node[twoportshape, t={\MyLabel{CH 12}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep12) {};
|
||||
|
||||
% Omission dots
|
||||
\node at (1.8, -2.6)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, -2.8)[circle,fill,inner sep=0.7pt]{};
|
||||
\node at (1.8, -3.0)[circle,fill,inner sep=0.7pt]{};
|
||||
|
||||
% Channel 15 repeaters
|
||||
\draw (1.8, -3.4) node[twoportshape, t={\MyLabel{CH 15}{Repeaters}}, circuitikz/bipoles/twoport/width=1.6, scale=0.5] (rep15) {};
|
||||
|
||||
% Direction switches
|
||||
\draw (4.6, 0.4) node[twoportshape,t=\MymyLabel{Per-channel \phantom{spac} x8 }{Input/Output Switch}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (ioswitch0) {};
|
||||
\draw (4.6, -0.4) node[twoportshape,t=\MymyLabel{Per-channel \phantom{spac} x8 }{Input/Output Switch}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (ioswitch1) {};
|
||||
\begin{scope}[xshift=5.5cm, yshift=0.65cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
||||
\draw (0.4, 0) to[short,-o](0.75, 0);
|
||||
\draw (0.78, 0)-- +(30: 0.46);
|
||||
\draw (1.25, 0)to[short,o-](1.6, 0);
|
||||
\end{scope}
|
||||
\begin{scope}[xshift=5.5cm, yshift=-0.15cm, scale=0.12, every node/.style={scale=0.1}, rotate=-90 ]
|
||||
\draw (0.4, 0) to[short,-o](0.75, 0);
|
||||
\draw (0.78, 0)-- +(30: 0.46);
|
||||
\draw (1.25, 0)to[short,o-](1.6, 0);
|
||||
\end{scope}
|
||||
|
||||
% I2C I/O expanders
|
||||
\draw (4.6, 1.6) node[twoportshape,t=\MymyLabel{IO Expander}{for I2C Bus}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (i2c0) {};
|
||||
\draw (4.6, -1.6) node[twoportshape,t=\MymyLabel{IO Expander}{for I2C Bus}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (i2c1) {};
|
||||
|
||||
% 2 Aesthetic EEPROMs
|
||||
\draw (4.6, 2.2) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (eeprom0) {};
|
||||
\draw (4.6, -2.2) node[twoportshape,t={EEPROM}, circuitikz/bipoles/twoport/width=2.7, scale=0.5] (eeprom1) {};
|
||||
|
||||
% EEMs from core device / controllers
|
||||
\draw (7.2, 1.9) node[twoportshape, t={EEM Port 0}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem0) {};
|
||||
\draw (7.2, -1.9) node[twoportshape, t={EEM Port 1}, circuitikz/bipoles/twoport/width=3.6, scale=0.7, rotate=-90] (eem1) {};
|
||||
|
||||
% Connect RJ45 to LVDS DIO channels
|
||||
% CH 0
|
||||
\draw [latexslim-] (rep0.west) -- (0.7, 3.4);
|
||||
\draw [-] (0.7, 3.4) -- (0.7, 3.1);
|
||||
\draw [-latexslim] (0.7, 3.1) -- (0.25, 3.1);
|
||||
% CH 1
|
||||
\draw [latexslim-latexslim] (0.25, 2.9) -- (0.9, 2.9);
|
||||
\node [label=center:\tiny{CH 1}] at (1.2, 2.9) {};
|
||||
% CH 2
|
||||
\draw [latexslim-latexslim] (0.25, 2.7) -- (0.9, 2.7);
|
||||
\node [label=center:\tiny{CH 2}] at (1.2, 2.7) {};
|
||||
% CH 3
|
||||
\draw [latexslim-] (rep3.west) -- (0.7, 2.2);
|
||||
\draw [-] (0.7, 2.2) -- (0.7, 2.5);
|
||||
\draw [-latexslim] (0.7, 2.5) -- (0.25, 2.5);
|
||||
|
||||
% CH 4
|
||||
\draw [latexslim-] (rep4.west) -- (0.7, 1.6);
|
||||
\draw [-] (0.7, 1.6) -- (0.7, 1.3);
|
||||
\draw [-latexslim] (0.7, 1.3) -- (0.25, 1.3);
|
||||
% CH 5
|
||||
\draw [latexslim-latexslim] (0.25, 1.1) -- (0.9, 1.1);
|
||||
\node [label=center:\tiny{CH 5}] at (1.2, 1.1) {};
|
||||
% CH 6
|
||||
\draw [latexslim-latexslim] (0.25, 0.9) -- (0.9, 0.9);
|
||||
\node [label=center:\tiny{CH 6}] at (1.2, 0.9) {};
|
||||
% CH 7
|
||||
\draw [latexslim-] (rep7.west) -- (0.7, 0.4);
|
||||
\draw [-] (0.7, 0.4) -- (0.7, 0.7);
|
||||
\draw [-latexslim] (0.7, 0.7) -- (0.25, 0.7);
|
||||
|
||||
% CH 8
|
||||
\draw [latexslim-] (rep8.west) -- (0.7, -0.4);
|
||||
\draw [-] (0.7, -0.4) -- (0.7, -0.7);
|
||||
\draw [-latexslim] (0.7, -0.7) -- (0.25, -0.7);
|
||||
% CH 9
|
||||
\draw [latexslim-latexslim] (0.25, -0.9) -- (0.9, -0.9);
|
||||
\node [label=center:\tiny{CH 9}] at (1.2, -0.9) {};
|
||||
% CH 10
|
||||
\draw [latexslim-latexslim] (0.25, -1.1) -- (0.9, -1.1);
|
||||
\node [label=center:\tiny{CH 10}] at (1.2, -1.1) {};
|
||||
% CH 11
|
||||
\draw [latexslim-] (rep11.west) -- (0.7, -1.6);
|
||||
\draw [-] (0.7, -1.6) -- (0.7, -1.3);
|
||||
\draw [-latexslim] (0.7, -1.3) -- (0.25, -1.3);
|
||||
|
||||
% CH 12
|
||||
\draw [latexslim-] (rep12.west) -- (0.7, -2.2);
|
||||
\draw [-] (0.7, -2.2) -- (0.7, -2.5);
|
||||
\draw [-latexslim] (0.7, -2.5) -- (0.25, -2.5);
|
||||
% CH 13
|
||||
\draw [latexslim-latexslim] (0.25, -2.7) -- (0.9, -2.7);
|
||||
\node [label=center:\tiny{CH 13}] at (1.2, -2.7) {};
|
||||
% CH 14
|
||||
\draw [latexslim-latexslim] (0.25, -2.9) -- (0.9, -2.9);
|
||||
\node [label=center:\tiny{CH 14}] at (1.2, -2.9) {};
|
||||
% CH 15
|
||||
\draw [latexslim-] (rep15.west) -- (0.7, -3.4);
|
||||
\draw [-] (0.7, -3.4) -- (0.7, -3.1);
|
||||
\draw [-latexslim] (0.7, -3.1) -- (0.25, -3.1);
|
||||
|
||||
% Interconnect repeaters controlled by EEM 0
|
||||
\draw [latexslim-] (2.4, 3.5) -- (2.9, 3.5);
|
||||
\draw [latexslim-] (2.4, 2.3) -- (2.9, 2.3);
|
||||
\draw [latexslim-] (2.4, 1.7) -- (2.9, 1.7);
|
||||
\draw [latexslim-] (2.4, 0.5) -- (2.9, 0.5);
|
||||
|
||||
\draw [-] (2.9, 3.5) -- (2.9, 0.5);
|
||||
|
||||
\draw [latexslim-] (2.4, 3.3) -- (3.1, 3.3);
|
||||
\draw [latexslim-] (2.4, 2.1) -- (3.1, 2.1);
|
||||
\draw [latexslim-] (2.4, 1.5) -- (3.1, 1.5);
|
||||
\draw [latexslim-] (2.4, 0.3) -- (3.1, 0.3);
|
||||
|
||||
\draw [-] (3.1, 3.3) -- (3.1, 0.3);
|
||||
|
||||
% Interconnect repeaters controlled by EEM 1
|
||||
\draw [latexslim-] (2.4, -3.5) -- (2.9, -3.5);
|
||||
\draw [latexslim-] (2.4, -2.3) -- (2.9, -2.3);
|
||||
\draw [latexslim-] (2.4, -1.7) -- (2.9, -1.7);
|
||||
\draw [latexslim-] (2.4, -0.5) -- (2.9, -0.5);
|
||||
|
||||
\draw [-] (2.9, -3.5) -- (2.9, -0.5);
|
||||
|
||||
\draw [latexslim-] (2.4, -3.3) -- (3.1, -3.3);
|
||||
\draw [latexslim-] (2.4, -2.1) -- (3.1, -2.1);
|
||||
\draw [latexslim-] (2.4, -1.5) -- (3.1, -1.5);
|
||||
\draw [latexslim-] (2.4, -0.3) -- (3.1, -0.3);
|
||||
|
||||
\draw [-] (3.1, -3.3) -- (3.1, -0.3);
|
||||
|
||||
% Junction between I/O expander and I/O switches
|
||||
\node at (4.6, 1.0)[circle,fill,inner sep=0.7pt]{};
|
||||
\draw [-latexslim] (i2c0.south) -- (4.6, 1.0);
|
||||
\draw [-latexslim] (ioswitch0.north) -- (4.6, 1.0);
|
||||
\draw [-] (4.6, 1.0) -- (3.1, 1.0);
|
||||
|
||||
\node at (4.6, -1.0)[circle,fill,inner sep=0.7pt]{};
|
||||
\draw [-latexslim] (i2c1.north) -- (4.6, -1.0);
|
||||
\draw [-latexslim] (ioswitch1.south) -- (4.6, -1.0);
|
||||
\draw [-] (4.6, -1.0) -- (3.1, -1.0);
|
||||
|
||||
% Connect EEM Ports
|
||||
\draw [-latexslim] (2.9, 2.8) -- (6.85, 2.8);
|
||||
\draw [latexslim-latexslim] (eeprom0.east) -- (6.85, 2.2);
|
||||
\draw [latexslim-latexslim] (i2c0.east) -- (6.85, 1.6);
|
||||
|
||||
\draw [-latexslim] (2.9, -2.8) -- (6.85, -2.8);
|
||||
\draw [latexslim-latexslim] (eeprom1.east) -- (6.85, -2.2);
|
||||
\draw [latexslim-latexslim] (i2c1.east) -- (6.85, -1.6);
|
||||
|
||||
\end{circuitikz}
|
||||
}
|
||||
|
||||
\caption{Simplified Block Diagram}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[h]
|
||||
\centering
|
||||
\scalebox{0.88}{
|
||||
\begin{circuitikz}[european, scale=0.95, every label/.append style={align=center}]
|
||||
|
||||
% Channel 0 input repeater
|
||||
\draw (3, 3.8) node[buffer, circuitikz/bipoles/twoport/width=1.2, scale=0.5] (rep_in0) {};
|
||||
|
||||
% Extra node to raise the upper boundary of the ch7 dotted area
|
||||
\draw[color=white, text=black] (3, 5.3) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (rep_out0_north) {};
|
||||
|
||||
% Left-extend the dotted area to enclose the intersection between input & output
|
||||
\draw[color=white, text=black] (2.1, 5.2) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (rep_out0_west) {};
|
||||
|
||||
% Right-extend the dotted area to enclose intersection & DIR text
|
||||
\draw[color=white, text=black] (3.8, 5.2) node[twoportshape, circuitikz/bipoles/twoport/width=0.4, scale=0.4 ] (rep_out0_east) {};
|
||||
|
||||
% Channel 0 output repeater, defined after previous node to coverup white boundaries
|
||||
\draw (3, 5.0) node[buffer, circuitikz/bipoles/twoport/width=1.2, scale=-0.5] (rep_out0) {};
|
||||
|
||||
% Channel 0 boundary
|
||||
\node[draw, dotted, thick, rounded corners, inner xsep=0.7em, inner ysep=0.4em, fit=(rep_in0)(rep_out0)(rep_out0_north)(rep_out0_west)(rep_out0_east)] (sig0) {};
|
||||
\node[fill=white, scale=0.7] at (sig0.north) {CH X Repeaters};
|
||||
|
||||
% Channel 0 direction line
|
||||
\draw [latexslim-latexslim] (3, 4.0) -- (3, 4.8);
|
||||
\draw [-] (3, 4.4) -- (4.6, 4.4);
|
||||
\node [label=center:\tiny{CH X}] at (5.0, 4.5) {};
|
||||
\node [label=center:\tiny{Direction}] at (5.0, 4.3) {};
|
||||
|
||||
% Expose & interconnect internal LVDS inputs
|
||||
\node at (3.8, 5.0)[circle,fill,inner sep=0.7pt]{};
|
||||
\draw [latexslim-] (rep_out0.west) -- (3.8, 5.0);
|
||||
\draw [-latexslim] (rep_in0.east) -- (3.8, 3.8) -- (3.8, 5.0);
|
||||
\draw [latexslim-latexslim] (3.8, 5.0) -- (4.6, 5.0);
|
||||
\node [label=center:\tiny{CH X}] at (5.0, 5.1) {};
|
||||
\node [label=center:\tiny{EEM I/O}] at (5.0, 4.9) {};
|
||||
|
||||
% Expose external LVDS I/O
|
||||
\node at (2.1, 4.4)[circle,fill,inner sep=0.7pt]{};
|
||||
\draw [-latexslim] (rep_out0.east) -- (2.1, 5.0) -- (2.1, 4.4);
|
||||
\draw [latexslim-] (rep_in0.west) -- (2.1, 3.8) -- (2.1, 4.4);
|
||||
\draw [latexslim-latexslim] (2.1, 4.4) -- (1.3, 4.4);
|
||||
\node [label=center:\tiny{CH X}] at (0.9, 4.5) {};
|
||||
\node [label=center:\tiny{LVDS I/O}] at (0.9, 4.3) {};
|
||||
|
||||
\end{circuitikz}
|
||||
}
|
||||
|
||||
\caption{Detailed diagram for channel repeaters}
|
||||
\end{figure}
|
||||
|
||||
\begin{figure}[hbt!]
|
||||
\centering
|
||||
\includegraphics[width=1.5in]{photo2245.jpg}
|
||||
\caption{LVDS-TTL Card photo}
|
||||
\end{figure}
|
||||
|
||||
|
||||
% For wide tables, a single column layout is better. It can be switched
|
||||
% page-by-page.
|
||||
\onecolumn
|
||||
|
||||
\section{Electrical Specifications}
|
||||
The Absolute Maximum Ratings are thorse values beyond which damage to the device may occur
|
||||
Other specifications should be met without exception.
|
||||
|
||||
\begin{table}[h]
|
||||
\begin{threeparttable}
|
||||
\caption{Absolute Maximum Ratings}
|
||||
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
||||
\thickhline
|
||||
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
||||
\textbf{Unit} & \textbf{Conditions} \\
|
||||
\hline
|
||||
LVDS DC input voltage & $V_{IN}$ & -0.5 & & 4.6 & V \\
|
||||
\hline
|
||||
LVDS DC output voltage & $V_{OUT}$ & -0.5 & & 4.6 & V \\
|
||||
\hline
|
||||
Continuous Short Circuit Current & $I_{OSD}$ & & 10 & & mA \\
|
||||
% Please just avoid ESC altogether.
|
||||
\hline
|
||||
ESD (Human Body Model) & & & 7000 & & V \\
|
||||
\hline
|
||||
ESD (Machine Model) & & & 300 & & V \\
|
||||
\thickhline
|
||||
\end{tabularx}
|
||||
\end{threeparttable}
|
||||
\end{table}
|
||||
|
||||
\begin{table}[h]
|
||||
\begin{threeparttable}
|
||||
\caption{Recommended Input Voltage}
|
||||
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
||||
\thickhline
|
||||
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
||||
\textbf{Unit} & \textbf{Conditions} \\
|
||||
\hline
|
||||
Magnitude of differential input & $|V_{ID}|$ & 0.1 & & 3.3 & V \\
|
||||
\hline
|
||||
Common mode input & $V_{IC}$ & $|V_{ID}|/2$ & & $3.3-|V_{ID}|/2$ & V \\
|
||||
\thickhline
|
||||
\end{tabularx}
|
||||
\end{threeparttable}
|
||||
\end{table}
|
||||
The recommended operating temperature is $-40\degree C \leq T_A \leq 85\degree C$.
|
||||
|
||||
All specifications are in the recommended operating temperature range unless otherwise noted.
|
||||
All typical values of DC specifications are at $T_A = 25\degree C$.
|
||||
|
||||
\begin{table}[h]
|
||||
\begin{threeparttable}
|
||||
\caption{DC Specifications}
|
||||
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
||||
\thickhline
|
||||
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
||||
\textbf{Unit} & \textbf{Conditions} \\
|
||||
\hline
|
||||
Differential input threshold HIGH & $V_{TH}$ & & & 100 & mV & \\
|
||||
\hline
|
||||
Differential input threshold LOW & $V_{TL}$ & -100 & & & mV & \\
|
||||
\hline
|
||||
Output differentiual Voltage & $V_{OD}$ & 250 & 330 & 450 & mV & \multirow{4}{*}{With 100$\Omega$ load.} \\
|
||||
\cline{0-5}
|
||||
$|V_{OD}|$ change (LOW-to-HIGH) & $\Delta V_{OD}$ & & & 25 & mV & \\
|
||||
\cline{0-5}
|
||||
Offset voltage & $V_{OS}$ & 1.125 & 1.23 & 1.375 & V & \\
|
||||
\cline{0-5}
|
||||
$|V_{OS}|$ change (LOW-to-HIGH) & $\Delta V_{OS}$ & & & 25 & mV & \\
|
||||
\hline
|
||||
Short circuit output current & $I_{OS}$ & & $\pm3.4$ & $\pm6$ & mA & \\
|
||||
\hline
|
||||
Input current & $I_{IN}$ & & & $\pm20$ & \textmu A & Recommended Input Voltage \\
|
||||
\hline
|
||||
Input capacitance & $C_{IN}$ & & 2.0 & & pF & \\
|
||||
\hline
|
||||
Output capacitance & $C_{OUT}$ & & 2.6 & & pF & \\
|
||||
\thickhline
|
||||
\end{tabularx}
|
||||
\end{threeparttable}
|
||||
\end{table}
|
||||
|
||||
\newpage
|
||||
|
||||
All typical values of AC specifications are at $T_A = 25\degree C$, $V_{ID} = 300mV$, $V_{IC} = 1.3V$ unless otherwise specified.
|
||||
|
||||
\begin{table}[h]
|
||||
\begin{threeparttable}
|
||||
\caption{AC Specifications}
|
||||
\begin{tabularx}{\textwidth}{l | c | c c c | c | X}
|
||||
\thickhline
|
||||
\textbf{Parameter} & \textbf{Symbol} & \textbf{Min.} & \textbf{Typ.} & \textbf{Max.} &
|
||||
\textbf{Unit} & \textbf{Conditions} \\
|
||||
\hline
|
||||
Differential Propagation delay & \multirow{2}{*}{$t_{PLHD}$} & \multirow{2}{*}{0.75} & \multirow{2}{*}{1.1} & \multirow{2}{*}{1.75} & \multirow{2}{*}{ns} & 100\textOmega~ between +/- outputs,\\
|
||||
(LOW-to-HIGH) & & & & & & 5pF between each output and GND,\\
|
||||
\cline{0-5}
|
||||
Differential Propagation delay & \multirow{2}{*}{$t_{PHLD}$} & \multirow{2}{*}{0.75} & \multirow{2}{*}{1.1} & \multirow{2}{*}{1.75} & \multirow{2}{*}{ns} & $200 mV \leq V_{ID} \leq 450 mV$,\\
|
||||
(HIGH-to-LOW) & & & & & & recommended $V_{IC}$,\\
|
||||
\cline{0-5}
|
||||
Differential Output Rise Time & \multirow{2}{*}{$t_{TLHD}$} & \multirow{2}{*}{0.29} & \multirow{2}{*}{0.40} & \multirow{2}{*}{0.58} & \multirow{2}{*}{ns} & duty Cycle = 50\%.\\
|
||||
(20\% to 80\%) & & & & & & \\
|
||||
\cline{0-5}
|
||||
Differential Output Fall Time & \multirow{2}{*}{$t_{THLD}$} & \multirow{2}{*}{0.29} & \multirow{2}{*}{0.40} & \multirow{2}{*}{0.58} & \multirow{2}{*}{ns} & \\
|
||||
(80\% to 20\%) & & & & & & \\
|
||||
\cline{0-5}
|
||||
Pulse skew & $t_{SK(P)}$ & & 0.01 & 0.2 & ns & \\
|
||||
\cline{0-5}
|
||||
Part-to-part skew & $t_{SK(PP)}$ & & & 0.5 & ns & \\
|
||||
\hline
|
||||
LVDS data jitter, & \multirow{2}{*}{$t_{DJ}$} & & \multirow{2}{*}{85} & \multirow{2}{*}{125} & \multirow{2}{*}{ps} & $PRBS=2^{23}-1$\\
|
||||
deterministic & & & & & & 800 Mbps\\
|
||||
\hline
|
||||
LVDS clock jitter, & \multirow{2}{*}{$t_{RJ}$} & & \multirow{2}{*}{2.1} & \multirow{2}{*}{3.5} & \multirow{2}{*}{ps} & \multirow{2}{*}{400 MHz clock}\\
|
||||
random (RMS) & & & & & & \\
|
||||
\thickhline
|
||||
\end{tabularx}
|
||||
\end{threeparttable}
|
||||
\end{table}
|
||||
|
||||
\section{Example ARTIQ code}
|
||||
The sections below demonstrate simple usage scenarios of the 2245 LVDS-TTL card with the ARTIQ control system.
|
||||
They do not exhaustively demonstrate all the features of the ARTIQ system.
|
||||
The full documentation for the ARTIQ software and gateware is available at \url{https://m-labs.hk}.
|
||||
|
||||
Timing accuracy in the examples below is well under 1 nanosecond thanks to the ARTIQ RTIO system.
|
||||
|
||||
\subsection{One pulse per second}
|
||||
The channel should be configured as output in both the gateware and hardware.
|
||||
|
||||
\begin{minted}{python}
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
while True:
|
||||
self.ttl0.pulse(500*ms)
|
||||
delay(500*ms)
|
||||
\end{minted}
|
||||
|
||||
\newpage
|
||||
|
||||
\subsection{Morse code}
|
||||
This example demonstrates some basic algorithmic features of the ARTIQ-Python language.
|
||||
\begin{minted}{python}
|
||||
def prepare(self):
|
||||
# As of ARTIQ-6, the ARTIQ compiler has limited string handling
|
||||
# capabilities, so we pass a list of integers instead.
|
||||
message = ".- .-. - .. --.-"
|
||||
self.commands = [{".": 1, "-": 2, " ": 3}[c] for c in message]
|
||||
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
for cmd in self.commands:
|
||||
if cmd == 1:
|
||||
self.led.pulse(100*ms)
|
||||
delay(100*ms)
|
||||
if cmd == 2:
|
||||
self.led.pulse(300*ms)
|
||||
delay(100*ms)
|
||||
if cmd == 3:
|
||||
delay(700*ms)
|
||||
\end{minted}
|
||||
|
||||
\subsection{Counting rising edges in a 1ms window}
|
||||
The channel should be configured as input in both the gateware and hardware.
|
||||
|
||||
\begin{minted}{python}
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
gate_end_mu = self.ttl0.gate_rising(1*ms)
|
||||
counts = self.ttl0.count()
|
||||
print(counts)
|
||||
\end{minted}
|
||||
|
||||
This example code uses the software counter, which has a maximum count rate of approximately 1 million events per second.
|
||||
If the gateware counter is enabled on the TTL channel, it can typically count up to 125 million events per second:
|
||||
\begin{minted}{python}
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
self.edgecounter0.gate_rising(1*ms)
|
||||
counts = self.edgecounter0.fetch_count()
|
||||
print(counts)
|
||||
\end{minted}
|
||||
|
||||
\newpage
|
||||
|
||||
\subsection{Responding to an external trigger}
|
||||
One channel needs to be configured as input, and the other as output.
|
||||
|
||||
\begin{minted}{python}
|
||||
@kernel
|
||||
def run(self):
|
||||
self.core.reset()
|
||||
self.ttlin.gate_rising(5*ms)
|
||||
timestamp_mu = self.ttlin.timestamp_mu()
|
||||
at_mu(timestamp_mu + self.core.seconds_to_mu(10*ms))
|
||||
self.ttlout.pulse(1*us)
|
||||
\end{minted}
|
||||
|
||||
\section{Ordering Information}
|
||||
To order, please visit \url{https://m-labs.hk} and select the 2245 LVDS-TTL in the ARTIQ Sinara crate configuration tool. The card may also be ordered separately by writing to \url{mailto:sales@m-labs.hk}.
|
||||
|
||||
\section*{}
|
||||
\vspace*{\fill}
|
||||
|
||||
\begin{footnotesize}
|
||||
Information furnished by M-Labs Limited is believed to be accurate and reliable. However, no responsibility is assumed by M-Labs Limited for its use, nor for any infringements of patents or other rights of third parties that may result from its use.
|
||||
Specifications subject to change without notice.
|
||||
\end{footnotesize}
|
||||
|
||||
\end{document}
|
||||
BIN
photo2245.jpg
Normal file
BIN
photo2245.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 81 KiB |
Loading…
Reference in New Issue
Block a user