Add two common fails on Urukul, and one hint to Fastino

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-02-22 15:27:39 +08:00
parent bc20eb0de7
commit 767471689e
2 changed files with 38 additions and 1 deletions

View File

@ -50,3 +50,37 @@ Press ENTER when done.
2. Touch each connector with oscilloscope, setup time- and voltage- scale and trigger, so that you can see sine waves
3. Measure frequencies and amplitudes on each connector, check with `artiq_sinara_test`'s respective values
4. When done, proceed with `artiq_sinara_test` and check LEDs are lighting up one after another
## Common problems
### Urukul AD9912 product id mismatch
```pycon
ValueError: Urukul AD9912 product id mismatch
```
Some Urukuls may fail with this error during testing, usually meaning that the Urukul has not been flashed with the
firmware, especially if the ID is `65535` (you will need to edit the code to check this).
You can flash the firmware yourself with a JTAG adapter:
1. Download the latest binary release from [quartiq/urukul](https://github.com/quartiq/urukul) and extract the `urukul.jed` file.
2. Connect the Urukul with the JTAG adapter to the PC and connect its EEM0 to any available Kasli/Kasli-SoC (do not hot-plug), then turn on the Kasli/Kasli-SoC.
3. Run `nix-shell -p xc3sprog`.
4. Run `xc3sprog -c jtaghs2 urukul.jed -m /opt/Xilinx/Vivado/<available version>/data/xicom/cable_data/digilent/lnx64/xbr/`.
5. If the last command outputs Verify: Success, then your Urukul is ready. It can also output the message
```shell
*** buffer overflow detected ***: terminated
Aborted (core dumped)
```
, which is okay if `Verify: Success` was also emitted.
### no valid window/delay
```pycon
ValueError: no valid window/delay
```
Check with the customer to see if synchronization is necessary, and disable it if it is not.
In any case, simply restart the test.

View File

@ -20,6 +20,9 @@
}
```
Fastino uses two physical EEM channels, but in the JSON file there should be only one channel specified,
and it should be the one connected to Fastino's EEM0.
## Setup
Connect the BNC/SMA-IDC adapters to the Zotino/Fastino with 26-pin cable if needed by customer. Be aware of the ports order -