1
0
Fork 0

mirny: add legacy almazny firmware

This commit is contained in:
mwojcik 2024-06-11 13:51:48 +08:00
parent 5c48363c54
commit df881461e8
2 changed files with 5 additions and 1 deletions

Binary file not shown.

View File

@ -17,7 +17,9 @@
## Getting the firmware ## Getting the firmware
Here is [Mirny 0.3.1 firmware](../extra/mirny/mirny-0.3.1.zip). It contains a single ``.jed`` file that can be flashed following [flashing instructions](#flashing). Here is [Mirny 0.3.1 firmware](../extra/mirny/mirny-0.3.1.zip). It contains a single ``.jed`` file that can be flashed following [flashing instructions](#flashing). This firmware supports Almazny v1.2+.
If you are using a legacy Almazny (v1.0-1.1), due to different signals routed, you need to flash the older [0.2.4 firmware with Almazny support](../extra/mirny/mirny_0.2.4_legacy_almazny.zip).
### Building firmware (optional) ### Building firmware (optional)
@ -150,4 +152,6 @@ You should also see differences in various modes, but that may require disabling
~~Mirnies often fail `ValueError: MUXOUT not high`, in that case restart the tests or reboot the board(s).~~ - fixed in [9569cfb](https://github.com/m-labs/artiq/commit/9569cfb26329c0acdc1705d3256d2506b7bccce5) ~~Mirnies often fail `ValueError: MUXOUT not high`, in that case restart the tests or reboot the board(s).~~ - fixed in [9569cfb](https://github.com/m-labs/artiq/commit/9569cfb26329c0acdc1705d3256d2506b7bccce5)
For Almazny v1.0 and 1.1 support, CPLD firmware 0.2.4 (linked above) must be flashed onto Mirny.
For Almazny v1.2+ support, CPLD firmware 0.3.1+ (with fixes) must be flashed onto Mirny. For Almazny v1.2+ support, CPLD firmware 0.3.1+ (with fixes) must be flashed onto Mirny.