1
0
Fork 0

Add instruction for SUServo

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-02-07 11:55:15 +08:00
parent eddde75739
commit cc2a1999d9
7 changed files with 60 additions and 2 deletions

View File

@ -27,9 +27,11 @@ feel free to push them.
Tips for adding hardware instructions:
1. Compose a chapter in a new Markdown file in `src/hw`
2. Add pictures if needed, store them in `src/img`
2. Add pictures if needed, store them in `src/img`, assure them to be clear, informative and compressed
(you can use `convert <INPUT IMAGE> -quality 80% -resize <width>x<height> <OUTPUT IMAGE>` for optimizing)
3. Add link to the new chapter to the `src/SUMMARY.md`
4. Do not forget to tell about all hidden/non-obvious obstacles and pitfalls
5. Add testing steps, even if the "obvious" ones
6. Add JSON sample if needed
7. View changed and added pages with `mdbook build` (see building instructions above)
7. Add hardware setup (e.g. pins, switches) steps if needed
8. View changed and added pages with `mdbook build` (see building instructions above)

View File

@ -4,3 +4,4 @@
- [Hardware](./hw/hardware.md)
- [Sinara 4624 AWG Phaser (Upconverter)](./hw/phaser_upconverter.md)
- [Sinara 4456 synthesizer Mirny](./hw/mirny.md)
- [SUServo (Sampler + Urukul)](./hw/suservo.md)

55
src/hw/suservo.md Normal file
View File

@ -0,0 +1,55 @@
# SUServo (Sampler + Urukul)
## JSON
```json
{
"type": "suservo",
"sampler_ports": [<port num>, <port num>],
"urukulN_ports": [<port num>, <port num>],
"urukulM_ports": [<port num>, <port num>], // optional
"clk_sel": 2
}
```
With enabled SUServo mode, you only need to add `suservo` to JSON file, with its Sampler and Urukul(s) removed.
## Setup
On bottoms of each Urukul, switch first pins 1 and 2 to `ON`, as on the picture:
![](../img/urukul_pins_suservo.jpeg)
## Testing
```text
*** Testing SUServos.
Initializing modules...
suservo0
...done
Setting up SUServo channels...
suservo0_ch0
suservo0_ch1
suservo0_ch2
suservo0_ch3
suservo0_ch4
suservo0_ch5
suservo0_ch6
suservo0_ch7
...done
Enabling...
suservo0
...done
Each Sampler channel applies proportional amplitude control
on the respective Urukul0 (ADC 0-3) and Urukul1 (ADC 4-7, if
present) channels.
Frequency: 10 MHz, output power: about -9 dBm at 0 V and about -15 dBm at 1.5 V
Verify frequency and power behavior.
```
1. Connect oscilloscope to the `urukul0` port and configure with time and voltage scale and trigger threshold
so that you'll see sine wave, like on the picture: ![](../img/urukul_suservo_output_without_battery.jpg)
2. Verify amplitude and frequency
3. Apply 1.5V (connect the AA-battery) to the `sampler0` port, as on the picture: ![](../img/urukul_sampler_susevo_connections.jpg)
4. You should see significant amplitude decrease, as in the picture: ![](../img/urukul_suservo_output_with_battery.jpg)
5. Verify amplitude difference, and the frequency to be unchanged
6. Repeat steps 1-5 for every available channel.

Binary file not shown.

After

Width:  |  Height:  |  Size: 131 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 103 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 91 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 98 KiB