1
0
Fork 0

Make phaser upconverter instruction more correct

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2023-07-04 17:33:03 +08:00
parent 489b5cea8f
commit 1d655361c3
4 changed files with 5 additions and 5 deletions

View File

@ -29,12 +29,12 @@ phaser0 10+0 10+1 10+2 10+3 10+4 MHz
3. Run gqrx and choose `Nuand bladeRF SN <number>...` 3. Run gqrx and choose `Nuand bladeRF SN <number>...`
4. Input rate 20000000, other settings are default 4. Input rate 20000000, other settings are default
5. Lower the gain in `Input options` 5. Lower the gain in `Input options`
6. When gqrx loaded, start DSP processing with frequency near 2.875 GHz +- frequencies from `artiq_sinara_test` 6. When gqrx loaded, start DSP processing with frequency near 2.875 GHz +- DUC frequencies from `artiq_sinara_test`
in `Receiver Options` in `Receiver Options`
7. Connect the probe through attenuator to the Phaser's ports 7. Connect the probe through attenuator to the Phaser's RF ports
8. You should see 5 tones on `artiq_sinara_test`'s frequencies, like on the picture below 8. You should see 5 tones on `artiq_sinara_test`'s frequencies, like on the pictures below for RF0 and RF1 respectively:
![](../img/phaser_upconverter_gqrx_rf0.png)
![](../img/phaser_upconverter_gqrx.png) ![](../img/phaser_upconverter_gqrx_rf1.png)
### Baseband ### Baseband

Binary file not shown.

Before

Width:  |  Height:  |  Size: 246 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 244 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 69 KiB