morgan
/
assembly
forked from sinara-hw/assembly
1
0
Fork 0
Code Pull Requests Activity

No CIDR on kasli-soc 

Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
Egor Savkin 2024-06-27 15:27:07 +08:00
parent 579749d114
commit 01d479eba3
3 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/build_test_firmware.md
View File

@ -57,7 +57,7 @@ artiq_coremgmt config write -f device_map dev_map.bin
1. Build firmware (see commands below) for SD card variant
2. Copy `results/boot.bin` to the SD card
3. Insert SD card to the Kasli-SoC and boot
4. Change IP from the default one: `artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75/24`
4. Change IP from the default one: `artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75`
5. Reboot and check it works on new IP address
6. Test hardware with the PSU, which is going to be shipped
7. Create a flash-drive with `device_db.py` file for customers (FAT32)
@ -72,7 +72,7 @@ artiq_ddb_template -o device_db.py <variant>.json
nix build -L --impure --expr 'let fl = builtins.getFlake "git+https://git.m-labs.hk/m-labs/artiq-zynq?ref=release-8"; in (fl.makeArtiqZynqPackage {target="kasli_soc"; variant="[master, standalone, satellite]"; json=<full path to the json description>;}).kasli_soc-[master, standalone, satellite]-sd'
# copy `results/boot.bin` to the SD card
# insert SD card to the Kasli-SoC and boot
artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75/24 # or just place extra/CONFIG.TXT near the boot.bin on SD card
artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75 # or just place extra/CONFIG.TXT near the boot.bin on SD card
# update firmware (alternative to copy to SD, if ARTIQ already running)
artiq_coremgmt config write -f boot result/boot.bin
artiq_coremgmt reboot

2
src/extra/CONFIG.TXT
View File

@ -1,2 +1,2 @@
ip=192.168.1.75/24
ip=192.168.1.75
rtio_clock=int_125

4
src/sw_sup/networking.md
View File

@ -8,8 +8,8 @@ a-la `I can't connect, please help`.
1. `device_db.py` has misleading `core_addr` address.
2. PC and the crate are in different subnets. They should be in the same network. Also you may want to directly attach the Kasli to the PC.
3. Network restrictions/problems on your router, either by IP, MAC, protocols or anything else.
4. Wrong configuration of the Kasli. Change IP or MAC address to correspond your network. For ARTIQ-8, add
network mask to the `ip` setting on Kasli, like `192.168.1.75/24`.
4. Wrong configuration of the Kasli. Change IP or MAC address to correspond your network. For ARTIQ-8 and later, add
network mask to the `ip` setting on Kasli (not applicable for Kasli-SoC), like `192.168.1.75/24`.
5. Incompatible Ethernet cables/SFP RJ45. Try different cables and SFP adapters.
We usually test them with CAT6 cables, but lower categories should be supported too.
6. SFP or Ethernet are not pushed til the end.