forked from sinara-hw/assembly
No CIDR on kasli-soc
Signed-off-by: Egor Savkin <es@m-labs.hk>
This commit is contained in:
parent
579749d114
commit
01d479eba3
|
@ -57,7 +57,7 @@ artiq_coremgmt config write -f device_map dev_map.bin
|
|||
1. Build firmware (see commands below) for SD card variant
|
||||
2. Copy `results/boot.bin` to the SD card
|
||||
3. Insert SD card to the Kasli-SoC and boot
|
||||
4. Change IP from the default one: `artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75/24`
|
||||
4. Change IP from the default one: `artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75`
|
||||
5. Reboot and check it works on new IP address
|
||||
6. Test hardware with the PSU, which is going to be shipped
|
||||
7. Create a flash-drive with `device_db.py` file for customers (FAT32)
|
||||
|
@ -72,7 +72,7 @@ artiq_ddb_template -o device_db.py <variant>.json
|
|||
nix build -L --impure --expr 'let fl = builtins.getFlake "git+https://git.m-labs.hk/m-labs/artiq-zynq?ref=release-8"; in (fl.makeArtiqZynqPackage {target="kasli_soc"; variant="[master, standalone, satellite]"; json=<full path to the json description>;}).kasli_soc-[master, standalone, satellite]-sd'
|
||||
# copy `results/boot.bin` to the SD card
|
||||
# insert SD card to the Kasli-SoC and boot
|
||||
artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75/24 # or just place extra/CONFIG.TXT near the boot.bin on SD card
|
||||
artiq_coremgmt -D 192.168.1.56 config write -s ip 192.168.1.75 # or just place extra/CONFIG.TXT near the boot.bin on SD card
|
||||
# update firmware (alternative to copy to SD, if ARTIQ already running)
|
||||
artiq_coremgmt config write -f boot result/boot.bin
|
||||
artiq_coremgmt reboot
|
||||
|
|
|
@ -1,2 +1,2 @@
|
|||
ip=192.168.1.75/24
|
||||
ip=192.168.1.75
|
||||
rtio_clock=int_125
|
||||
|
|
|
@ -8,8 +8,8 @@ a-la `I can't connect, please help`.
|
|||
1. `device_db.py` has misleading `core_addr` address.
|
||||
2. PC and the crate are in different subnets. They should be in the same network. Also you may want to directly attach the Kasli to the PC.
|
||||
3. Network restrictions/problems on your router, either by IP, MAC, protocols or anything else.
|
||||
4. Wrong configuration of the Kasli. Change IP or MAC address to correspond your network. For ARTIQ-8, add
|
||||
network mask to the `ip` setting on Kasli, like `192.168.1.75/24`.
|
||||
4. Wrong configuration of the Kasli. Change IP or MAC address to correspond your network. For ARTIQ-8 and later, add
|
||||
network mask to the `ip` setting on Kasli (not applicable for Kasli-SoC), like `192.168.1.75/24`.
|
||||
5. Incompatible Ethernet cables/SFP RJ45. Try different cables and SFP adapters.
|
||||
We usually test them with CAT6 cables, but lower categories should be supported too.
|
||||
6. SFP or Ethernet are not pushed til the end.
|
||||
|
|
Loading…
Reference in New Issue