assembly/src/hw/phaser.md

# Sinara 4624 AWG Phaser (Upconverter/Baseband)

[Wiki](https://github.com/sinara-hw/Phaser/wiki)

## JSON

```json
{
   "type": "phaser",
   "hw_rev": "vX.Y", // optional
   "ports": [<port num>]
}
```

## Testing

After running `artiq_sinara_test`:

```text
*** Testing Phaser DACs and 6 USER LEDs.
Frequencies:
phaser0 10+0 10+1 10+2 10+3 10+4 MHz
```

### Upconverter

1. Install gqrx `nix-shell -p gqrx`
2. Connect bladeRF via USB cable only
3. Run gqrx and choose `BladeRF #<number>...`
4. Input rate 30000000, other settings are default
5. When gqrx loaded, start DSP processing with frequency near 2.875 GHz + frequencies from `artiq_sinara_test`
   in `Receiver Options`
6. Connect the probe through attenuator to the Phaser's ports
7. You should see 5 tones on `artiq_sinara_test`'s frequencies, like on the picture below

![](../img/phaser_upconverter_gqrx.png)


### Baseband

1. Install gqrx `nix-shell -p gqrx`
2. Connect bladeRF via USB cable only
3. Run gqrx and choose `Nuand bladeRF SN <number>...`
4. Input rate 15000000, other settings are default
5. When gqrx loaded, start DSP processing with frequency near 2.875 GHz (???)
6. Connect the probe through attenuator to the Phaser's ports RF0 or RF1 (not the ADC)
7. You should see 5 tones on `artiq_sinara_test`'s frequencies (???):
   ![phaser_baseband.png](../img/phaser_baseband.png)