cxp downconn firmware: GTX setup

testing: add loopmode mode & tsusrclk mmcm drp bitbang
testing: add IDLE word printout
downconn: add QPLL and GTX setup
downconn: add DRP to support all CXP linerate up to 12.5Gbps

src/gateware/cxp.py

@@ -0,0 +1,74 @@
+from migen import *
+from misoc.interconnect.csr import *
+from misoc.cores.liteeth_mini.mac.crc import LiteEthMACCRCEngine
+
+from cxp_downconn import CXP_DownConn
+from cxp_upconn import CXP_UpConn
+
+class CXP(Module, AutoCSR):
+    def __init__(self, refclk, pads, sys_clk_freq, debug_sma, pmod_pads):
+        self.submodules.crc = CXP_CRC(8)
+        # FIFOs with transmission priority
+        # 0: Trigger packet
+        # 1: IO acknowledgment for trigger packet
+        # 2: All other packets
+        self.submodules.upconn = CXP_UpConn(debug_sma, sys_clk_freq, pmod_pads)
+
+        self.submodules.downconn = CXP_DownConn(refclk, pads, sys_clk_freq, debug_sma, pmod_pads)
+
+
+class CXP_CRC(Module, AutoCSR):
+    width = 32
+    polynom = 0x04C11DB7
+    seed = 2**width-1
+    def __init__(self, data_width):
+        self.d = Signal(data_width)
+        self.stb = Signal()
+        self.reset = Signal()
+        self.val = Signal(self.width, reset=self.seed)
+
+        self.data = CSR(data_width)
+        self.en = CSR()
+        self.value = CSRStatus(self.width)
+        self.processed = CSRStatus(self.width)
+
+        # # #
+        
+        self.submodules.engine = LiteEthMACCRCEngine(data_width, self.width, self.polynom)
+
+        self.sync += [
+            self.val.eq(self.engine.next),
+            If(self.stb,
+                self.engine.data.eq(self.d), 
+
+                If(self.reset,
+                    self.engine.last.eq(self.seed), 
+                    # clear reset bit
+                    self.reset.eq(0),
+                ).Else(
+                    self.engine.last.eq(self.val), 
+                )
+            ),
+        ]
+
+        # DEBUG: remove those csr
+        # TODO: do char bit reverse outside of this submodule
+
+        p0 = Signal(8)
+        p1 = Signal(8)
+        p2 = Signal(8)
+        p3 = Signal(8)
+        self.comb += [
+            p3.eq(self.engine.next[:8][::-1]),
+            p2.eq(self.engine.next[8:16][::-1]),
+            p1.eq(self.engine.next[16:24][::-1]),
+            p0.eq(self.engine.next[24:32][::-1]),
+        ]
+        self.sync += [
+            self.d.eq(self.data.r),
+            self.stb.eq(self.data.re),
+            If(self.en.re, self.reset.eq(1)),
+
+            self.value.status.eq(self.engine.next),
+            self.processed.status.eq(Cat(p3, p2, p1, p0)),
+        ]

src/gateware/cxp_downconn.py

@@ -0,0 +1,820 @@
+from migen import *
+from migen.genlib.cdc import MultiReg
+from migen.genlib.resetsync import AsyncResetSynchronizer
+
+from misoc.cores.code_8b10b import Encoder, Decoder
+from misoc.interconnect.csr import *
+
+from artiq.gateware.drtio.transceiver.gtx_7series_init import *
+
+from functools import reduce
+from operator import add
+
+class CXP_DownConn(Module, AutoCSR):
+    def __init__(self, refclk, pads, sys_clk_freq, debug_sma, pmod_pads):
+        self.rx_start_init = CSRStorage()
+        self.rx_restart = CSR()
+
+        self.tx_start_init = CSRStorage()
+        self.tx_restart = CSR()
+        self.txenable = CSRStorage()
+
+        self.txinit_phaligndone = CSRStatus()
+        self.rxinit_phaligndone = CSRStatus()
+        self.rx_ready = CSRStatus()
+
+        self.qpll_reset = CSR()
+        self.qpll_locked = CSRStatus()
+
+        # # #
+
+        self.submodules.qpll = qpll = QPLL(refclk, sys_clk_freq)
+
+        # single & master tx_mode can lock with rx in loopback 
+        self.submodules.gtx = gtx = GTX(self.qpll, pads, sys_clk_freq, tx_mode="single", rx_mode="single")
+        
+        # NOTE: No need to connect cxp_gtx_tx, we don't use tx anyway (just for loopback)
+
+        # TODO: Connect slave cxp_gtx_rx clock tgt
+        # checkout channel interfaces & drtio_gtx
+        # checkout GTPTXPhaseAlignement for inspiration
+
+        self.sync += [
+            # PLL
+            qpll.reset.eq(self.qpll_reset.re),
+            self.qpll_locked.status.eq(qpll.lock),
+            # GTX
+            self.txinit_phaligndone.status.eq(gtx.tx_init.Xxphaligndone),
+            self.rxinit_phaligndone.status.eq(gtx.rx_init.Xxphaligndone),
+            self.rx_ready.status.eq(gtx.rx_ready),
+
+            gtx.txenable.eq(self.txenable.storage[0]),
+            gtx.tx_restart.eq(self.tx_restart.re),
+            gtx.rx_restart.eq(self.rx_restart.re),
+            gtx.tx_init.clk_path_ready.eq(self.tx_start_init.storage),
+            gtx.rx_init.clk_path_ready.eq(self.rx_start_init.storage),
+        ]
+
+        # GTX Channels DRP
+        self.tx_div = CSRStorage(3)
+        self.rx_div = CSRStorage(3)
+
+        self.gtx_daddr = CSRStorage(9)
+        self.gtx_dread = CSR()
+        self.gtx_din_stb = CSR()
+        self.gtx_din = CSRStorage(16)
+
+        self.gtx_dout = CSRStatus(16)
+        self.gtx_dready = CSR()
+
+        self.comb += gtx.dclk.eq(ClockSignal("sys"))
+        self.sync += [
+            gtx.tx_rate.eq(self.tx_div.storage),
+            gtx.rx_rate.eq(self.rx_div.storage),
+
+            gtx.den.eq(0),
+            gtx.dwen.eq(0),
+            If(self.gtx_dread.re,
+                gtx.den.eq(1),
+                gtx.daddr.eq(self.gtx_daddr.storage),
+            ).Elif(self.gtx_din_stb.re,
+                gtx.den.eq(1),
+                gtx.dwen.eq(1),
+                gtx.daddr.eq(self.gtx_daddr.storage),
+                gtx.din.eq(self.gtx_din.storage),
+            ),
+            If(gtx.dready,
+               self.gtx_dready.w.eq(1),
+               self.gtx_dout.status.eq(gtx.dout),
+            ),
+            If(self.gtx_dready.re,
+               self.gtx_dready.w.eq(0),
+            ),
+        ]
+
+        # QPLL DRP
+
+        self.qpll_daddr = CSRStorage(8)
+        self.qpll_dread = CSR()
+        self.qpll_din_stb = CSR()
+        self.qpll_din = CSRStorage(16)
+
+        self.qpll_dout = CSRStatus(16)
+        self.qpll_dready = CSR()
+
+        self.comb += qpll.dclk.eq(ClockSignal("sys"))
+        self.sync += [
+            qpll.den.eq(0),
+            qpll.dwen.eq(0),
+
+            If(self.qpll_dread.re,
+                qpll.den.eq(1),
+                qpll.daddr.eq(self.qpll_daddr.storage),
+            ).Elif(self.qpll_din_stb.re,
+                qpll.den.eq(1),
+                qpll.dwen.eq(1),
+                qpll.daddr.eq(self.qpll_daddr.storage),
+                qpll.din.eq(self.qpll_din.storage),
+            ),
+            If(qpll.dready,
+               self.qpll_dready.w.eq(1),
+               self.qpll_dout.status.eq(qpll.dout),
+            ),
+            If(self.qpll_dready.re,
+               self.qpll_dready.w.eq(0),
+            ),
+        ]
+
+        # DEBUG: txusrclk PLL DRG
+        
+        self.txpll_reset = CSRStorage()
+        self.pll_daddr = CSRStorage(7)
+        self.pll_dclk = CSRStorage()
+        self.pll_den = CSRStorage()
+        self.pll_din = CSRStorage(16)
+        self.pll_dwen = CSRStorage()
+
+        self.txpll_locked = CSRStatus()
+        self.pll_dout = CSRStatus(16)
+        self.pll_dready = CSRStatus()
+
+        self.comb += [
+        gtx.txpll_reset.eq(self.txpll_reset.storage),
+        gtx.pll_daddr.eq(self.pll_daddr.storage),
+        gtx.pll_dclk.eq(self.pll_dclk.storage),
+        gtx.pll_den.eq(self.pll_den.storage),
+        gtx.pll_din.eq(self.pll_din.storage),
+        gtx.pll_dwen.eq(self.pll_dwen.storage),
+
+        self.txpll_locked.status.eq(gtx.txpll_locked),
+        self.pll_dout.status.eq(gtx.pll_dout),
+        self.pll_dready.status.eq(gtx.pll_dready),
+        ]
+
+        # DEBUG:loopback 
+        self.loopback_mode = CSRStorage(3)
+        self.comb += gtx.loopback_mode.eq(self.loopback_mode.storage) 
+
+        # DEBUG: IO SMA & PMOD
+        self.specials += [
+            Instance("OBUF", i_I=gtx.cd_cxp_gtx_rx.clk, o_O=debug_sma.p_tx),
+            Instance("OBUF", i_I=gtx.cd_cxp_gtx_tx.clk, o_O=debug_sma.n_rx),
+
+            # pmod 0-7 pin
+            Instance("OBUF", i_I=gtx.comma_checker.comma_aligned, o_O=pmod_pads[0]),
+            Instance("OBUF", i_I=gtx.comma_checker.comma_det, o_O=pmod_pads[1]),
+            Instance("OBUF", i_I=gtx.comma_checker.restart_sys, o_O=pmod_pads[2]),
+            Instance("OBUF", i_I=gtx.comma_checker.aligner_en, o_O=pmod_pads[3]),
+            Instance("OBUF", i_I=gtx.comma_checker.check_reset, o_O=pmod_pads[4]),
+            Instance("OBUF", i_I=gtx.comma_checker.has_comma, o_O=pmod_pads[5]),
+            Instance("OBUF", i_I=gtx.comma_checker.has_error, o_O=pmod_pads[6]),
+            Instance("OBUF", i_I=gtx.comma_checker.ready_sys, o_O=pmod_pads[7]),
+
+            # Instance("OBUF", i_I=gtx.dclk, o_O=pmod_pads[0]),
+            # Instance("OBUF", i_I=gtx.den, o_O=pmod_pads[1]),
+            # Instance("OBUF", i_I=gtx.dwen, o_O=pmod_pads[2]),
+            # Instance("OBUF", i_I=gtx.dready, o_O=pmod_pads[3]),
+        ]
+
+        # DEBUG: datain
+
+        
+        self.sync.cxp_gtx_tx += [
+            self.gtx.encoder.d[0].eq(0xBC),
+            self.gtx.encoder.k[0].eq(1),
+            self.gtx.encoder.d[1].eq(0x3C),
+            self.gtx.encoder.k[1].eq(1),
+            self.gtx.encoder.d[2].eq(0x3C),
+            self.gtx.encoder.k[2].eq(1),
+            self.gtx.encoder.d[3].eq(0xB5),
+            self.gtx.encoder.k[3].eq(0),
+        ]
+
+        self.rxdata_0 = CSRStatus(10)
+        self.rxdata_1 = CSRStatus(10)
+        self.rxdata_2 = CSRStatus(10)
+        self.rxdata_3 = CSRStatus(10)
+        self.decoded_data_0 = CSRStatus(8)
+        self.decoded_data_1 = CSRStatus(8)
+        self.decoded_data_2 = CSRStatus(8)
+        self.decoded_data_3 = CSRStatus(8)
+        self.decoded_k_0 = CSRStatus()
+        self.decoded_k_1 = CSRStatus()
+        self.decoded_k_2 = CSRStatus()
+        self.decoded_k_3 = CSRStatus()
+
+        self.sync.cxp_gtx_rx += [
+            self.rxdata_0.status.eq(self.gtx.decoders[0].input),
+            self.decoded_data_0.status.eq(self.gtx.decoders[0].d),
+            self.decoded_k_0.status.eq(self.gtx.decoders[0].k),
+
+            self.rxdata_1.status.eq(self.gtx.decoders[1].input),
+            self.decoded_data_1.status.eq(self.gtx.decoders[1].d),
+            self.decoded_k_1.status.eq(self.gtx.decoders[1].k),
+
+            self.rxdata_2.status.eq(self.gtx.decoders[2].input),
+            self.decoded_data_2.status.eq(self.gtx.decoders[2].d),
+            self.decoded_k_2.status.eq(self.gtx.decoders[2].k),
+
+            self.rxdata_3.status.eq(self.gtx.decoders[3].input),
+            self.decoded_data_3.status.eq(self.gtx.decoders[3].d),
+            self.decoded_k_3.status.eq(self.gtx.decoders[3].k),
+        ]
+
+
+class QPLL(Module):
+    def __init__(self, refclk, sys_clk_freq):
+        self.clk = Signal()
+        self.refclk = Signal()
+        self.lock = Signal()
+        self.reset = Signal()
+
+        # Dynamic Reconfiguration Ports
+        self.daddr = Signal(8)
+        self.dclk = Signal()
+        self.den = Signal()
+        self.dwen = Signal()
+        self.din = Signal(16)
+
+        self.dout = Signal(16)
+        self.dready = Signal()
+        # # #
+
+        # VCO @ 10GHz, linerate = 1.25Gbps
+        # feedback divider = 80
+        qpll_fbdiv = 0b0100100000
+        qpll_fbdiv_ratio = 1
+        refclk_div = 1
+        self.Xxout_div = 8
+
+        # DEBUG: txuserclk
+        fbdiv_real = 80
+        self.tx_usrclk_freq = (sys_clk_freq*fbdiv_real/self.Xxout_div)/40
+        
+        self.specials += [
+            Instance("GTXE2_COMMON",
+                i_QPLLREFCLKSEL=0b001,
+                i_GTREFCLK0=refclk,         
+
+                i_QPLLPD=0,
+                i_QPLLRESET=self.reset,
+                i_QPLLLOCKEN=1,
+                o_QPLLLOCK=self.lock,
+                o_QPLLOUTCLK=self.clk,
+                o_QPLLOUTREFCLK=self.refclk,
+
+                # See UG476 (v1.12.1) Table 2-16
+                p_QPLL_FBDIV=qpll_fbdiv,
+                p_QPLL_FBDIV_RATIO=qpll_fbdiv_ratio,
+                p_QPLL_REFCLK_DIV=refclk_div,
+
+                # From 7 Series FPGAs Transceivers Wizard
+                p_BIAS_CFG=0x0000040000001000,
+                p_COMMON_CFG=0x00000000,
+                p_QPLL_CFG=0x0680181,
+                p_QPLL_CLKOUT_CFG=0b0000,
+                p_QPLL_COARSE_FREQ_OVRD=0b010000,
+                p_QPLL_COARSE_FREQ_OVRD_EN=0b0,
+                p_QPLL_CP=0b0000011111,
+                p_QPLL_CP_MONITOR_EN=0b0,
+                p_QPLL_DMONITOR_SEL=0b0,
+                p_QPLL_FBDIV_MONITOR_EN= 0b0,
+                p_QPLL_INIT_CFG=0x000006,
+                p_QPLL_LOCK_CFG=0x21E8,
+                p_QPLL_LPF=0b1111,
+             
+                # Reserved, values cannot be modified
+                i_BGBYPASSB=0b1,
+                i_BGMONITORENB=0b1,
+                i_BGPDB=0b1,
+                i_BGRCALOVRD=0b11111,
+                i_RCALENB=0b1,
+                i_QPLLRSVD1=0b0,
+                i_QPLLRSVD2=0b11111,
+
+                # Dynamic Reconfiguration Ports
+                i_DRPADDR=self.daddr,
+                i_DRPCLK=self.dclk,
+                i_DRPEN=self.den,
+                i_DRPWE=self.dwen,
+                i_DRPDI=self.din,
+                o_DRPDO=self.dout,
+                o_DRPRDY=self.dready,
+            )
+        ]
+
+# Warning: Xilinx transceivers are LSB first, and comma needs to be flipped
+# compared to the usual 8b10b binary representation.
+class Comma_Checker(Module):
+    def __init__(self, comma, reset_period=10_000_000):
+        self.data = Signal(20)
+        self.comma_aligned = Signal()
+        self.comma_realigned = Signal()
+        self.comma_det = Signal()
+
+        self.aligner_en = Signal()
+        self.ready_sys = Signal()
+        self.restart_sys = Signal()
+
+        # # #
+
+
+        # periodically reset rx until rx is connected and receiving valid data
+        # as after connecting RXP/RXN, the whole RX need to be reset 
+        
+        reset_counter = Signal(reset=reset_period-1, max=reset_period)
+        self.sync += [
+            self.restart_sys.eq(0),
+            If(~self.ready_sys,
+                If(reset_counter == 0,
+                    reset_counter.eq(reset_counter.reset),
+                    self.restart_sys.eq(1),
+                ).Else(
+                    reset_counter.eq(reset_counter - 1),
+                )
+            )
+        ]
+
+
+        # Data and comma checker
+        # From UG476 (v1.12.1) p.228
+        # The built-in RXBYTEISALIGNED can be falsely asserted at linerate higher than 5Gbps
+        # The validity of data and comma needed to be checked externally
+
+        comma_n = ~comma & 0b1111111111
+
+        # DEBUG: remove after use
+        self.has_comma = Signal()
+        self.has_error = Signal()
+
+        comma_seen = Signal()
+        error_seen = Signal()
+        one_counts = Signal(max=11)
+
+        # From CXP-001-2021 section 9.2.5.1
+        # For high speed connection an IDLE word shall be transmitted at least once every 100 words
+        counter_period = 200
+
+        counter = Signal(reset=counter_period-1, max=counter_period)
+        check_reset = Signal()
+        check = Signal()
+
+        self.sync.cxp_gtx_rx += [
+            If(check_reset,
+                counter.eq(counter.reset),   
+                check.eq(0),
+            ).Elif(counter == 0,
+                check.eq(1),
+            ).Else(
+                counter.eq(counter - 1),   
+            ),
+
+            If(check_reset,
+                comma_seen.eq(0),
+            ).Elif((self.data[:10] == comma) | (self.data[:10] == comma_n),
+                comma_seen.eq(1)
+            ),
+
+            one_counts.eq(reduce(add, [self.data[i] for i in range(10)])),
+            If(check_reset,
+                error_seen.eq(0),
+            ).Elif((one_counts != 4) & (one_counts != 5) & (one_counts != 6),
+                error_seen.eq(1),
+            ),
+
+            # DEBUG: 
+            self.has_comma.eq(0),
+            If((self.data[:10] == comma) | (self.data[:10] == comma_n),
+               self.has_comma.eq(1),
+            ),
+
+            self.has_error.eq(0),
+            If((one_counts != 4) & (one_counts != 5) & (one_counts != 6),
+                self.has_error.eq(1),
+            ),
+        ]
+
+        # DEBUG: expose signal
+        self.check_reset = Signal()
+        self.comb +=[
+            self.check_reset.eq(check_reset),
+        ]
+
+        self.submodules.rxfsm = rxfsm = ClockDomainsRenamer("cxp_gtx_rx")(FSM(reset_state="WAIT_COMMA"))
+
+        rxfsm.act("WAIT_COMMA",
+            If(self.comma_det,
+                # # start aligner early, so word aligned will fall
+                # self.aligner_en_rxclk.eq(1),
+                NextState("ALIGNING"),
+            )
+        )
+
+        rxfsm.act("ALIGNING",
+            If(self.comma_aligned & (~self.comma_realigned),
+                NextState("WAIT_ALIGNED_DATA"),               
+            ).Else(
+                self.aligner_en.eq(1),
+            )
+        )
+
+        # wait for the aligned data to arrive at the FPGA RX interface 
+        # as there is a delay before the data is avaiable after RXBYTEISALIGNED is asserted
+        self.submodules.timer = timer = ClockDomainsRenamer("cxp_gtx_rx")(WaitTimer(10_000))
+
+        rxfsm.act("WAIT_ALIGNED_DATA",
+            timer.wait.eq(1),
+            If(timer.done,
+                check_reset.eq(1),
+                NextState("CHECKING"),
+            )
+        )
+
+        rxfsm.act("CHECKING",
+            If(check,
+                check_reset.eq(1),
+                If(comma_seen & (~error_seen),
+                    NextState("READY"),
+                ).Else(
+                    NextState("WAIT_COMMA")
+                )
+            )
+        )
+
+        ready = Signal()
+        self.specials += MultiReg(ready, self.ready_sys)
+        rxfsm.act("READY",
+            ready.eq(1),
+            If(check,
+                check_reset.eq(1),
+                If(~(comma_seen & (~error_seen)),
+                    NextState("WAIT_COMMA"),
+                )
+            )
+        )
+
+
+class GTX(Module):
+    # Settings:
+    # * GTX reference clock @ 125MHz
+    # * GTX data width = 20
+    # * GTX PLL frequency @ 3.125GHz
+    # * GTX line rate (TX & RX) @ 3.125Gb/s
+    # * GTX TX/RX USRCLK @ PLL/datawidth = 156MHz
+    def __init__(self, qpll, pads, sys_clk_freq, tx_mode="single", rx_mode="single"):
+        assert tx_mode in ["single", "master", "slave"]
+        assert rx_mode in ["single", "master", "slave"]
+
+        # linerate = USRCLK * datawidth
+        pll_fbout_mult = 8
+        txusr_pll_div = pll_fbout_mult*sys_clk_freq/qpll.tx_usrclk_freq
+
+        self.tx_restart = Signal()
+        self.rx_restart = Signal()
+        self.loopback_mode = Signal(3)
+
+        self.txenable = Signal()
+        self.rx_ready = Signal()
+
+        self.tx_rate = Signal(3)
+        self.rx_rate = Signal(3)
+
+        # Dynamic Reconfiguration Ports
+        self.daddr = Signal(9)
+        self.dclk = Signal()
+        self.den = Signal()
+        self.dwen = Signal()
+        self.din = Signal(16)
+        self.dout = Signal(16)
+        self.dready = Signal()
+
+        self.submodules.encoder = ClockDomainsRenamer("cxp_gtx_tx")(Encoder(4, True))
+        self.submodules.decoders = [ClockDomainsRenamer("cxp_gtx_rx")(
+            (Decoder(True))) for _ in range(4)]
+
+
+        # transceiver direct clock outputs
+        # useful to specify clock constraints in a way palatable to Vivado
+        self.txoutclk = Signal()
+        self.rxoutclk = Signal()
+
+        # # #
+
+        # TX generates cxp_tx clock, init must be in system domain
+        # FIXME: 500e6 is used to fix Xx reset by holding gtxXxreset for a couple cycle more
+        self.submodules.tx_init = tx_init = GTXInit(500e6, False, mode=tx_mode)
+        self.submodules.rx_init = rx_init = GTXInit(sys_clk_freq, True, mode=rx_mode)
+
+        # RX receives restart commands from txusrclk domain
+        # self.submodules.rx_init = rx_init = ClockDomainsRenamer("cxp_gtx_tx")(GTXInit(500e6, True, mode=rx_mode))
+
+        self.comb += [
+            tx_init.cplllock.eq(qpll.lock),
+            rx_init.cplllock.eq(qpll.lock)
+        ]
+
+        txdata = Signal(40)
+        rxdata = Signal(40)
+
+        comma_aligned = Signal()
+        comma_realigned = Signal()
+        comma_det = Signal()
+        comma_aligner_en = Signal()
+        # Note: the following parameters were set after consulting AR45360
+        self.specials += \
+            Instance("GTXE2_CHANNEL",
+                # PMA Attributes
+                p_PMA_RSV=0x001E7080,
+                p_PMA_RSV2=0x2050,              # PMA_RSV2[5] = 0: Eye scan feature disabled
+                p_PMA_RSV3=0,
+                p_PMA_RSV4=1,                   # PMA_RSV[4],RX_CM_TRIM[2:0] = 0b1010: Common mode 800mV
+                p_RX_BIAS_CFG=0b000000000100,
+                p_RX_OS_CFG=0b0000010000000,
+                p_RX_CLK25_DIV=5,
+                p_TX_CLK25_DIV=5,
+
+                # Power-Down Attributes
+                p_PD_TRANS_TIME_FROM_P2=0x3c,
+                p_PD_TRANS_TIME_NONE_P2=0x3c,
+                p_PD_TRANS_TIME_TO_P2=0x64,
+                i_CPLLPD=1,
+
+                # Dynamic Tx/Rx divider
+                i_TXRATE=self.tx_rate,
+                i_RXRATE=self.rx_rate,
+
+                # QPLL
+                i_QPLLCLK=qpll.clk,
+                i_QPLLREFCLK=qpll.refclk,
+                p_RXOUT_DIV=qpll.Xxout_div,
+                p_TXOUT_DIV=qpll.Xxout_div,
+                i_RXSYSCLKSEL=0b11, # use QPLL & QPLL's REFCLK
+                i_TXSYSCLKSEL=0b11, # use QPLL & CPLL's REFCLK
+
+                # TX clock
+                p_TXBUF_EN="FALSE",
+                p_TX_XCLK_SEL="TXUSR",
+                o_TXOUTCLK=self.txoutclk,
+                # i_TXSYSCLKSEL=0b00,
+                i_TXOUTCLKSEL=0b11,
+
+                # TX Startup/Reset
+                i_TXPHDLYRESET=0,
+                i_TXDLYBYPASS=0,
+                i_TXPHALIGNEN=1 if tx_mode != "single" else 0,
+                i_GTTXRESET=tx_init.gtXxreset,
+                o_TXRESETDONE=tx_init.Xxresetdone,
+                i_TXDLYSRESET=tx_init.Xxdlysreset,
+                o_TXDLYSRESETDONE=tx_init.Xxdlysresetdone,
+                i_TXPHINIT=tx_init.txphinit if tx_mode != "single" else 0,
+                o_TXPHINITDONE=tx_init.txphinitdone if tx_mode != "single" else Signal(),
+                i_TXPHALIGN=tx_init.Xxphalign if tx_mode != "single" else 0,
+                i_TXDLYEN=tx_init.Xxdlyen if tx_mode != "single" else 0,
+                o_TXPHALIGNDONE=tx_init.Xxphaligndone,
+                i_TXUSERRDY=tx_init.Xxuserrdy,
+                p_TXPMARESET_TIME=1,
+                p_TXPCSRESET_TIME=1,
+                i_TXINHIBIT=~self.txenable,
+
+                # TX data
+                p_TX_DATA_WIDTH=40,
+                p_TX_INT_DATAWIDTH=1, # 1 if a line rate is greater than 6.6 Gbps
+                i_TXCHARDISPMODE=Cat(txdata[9], txdata[19], txdata[29], txdata[39]),
+                i_TXCHARDISPVAL=Cat(txdata[8], txdata[18], txdata[28], txdata[38]),
+                i_TXDATA=Cat(txdata[:8], txdata[10:18], txdata[20:28], txdata[30:38]),
+                i_TXUSRCLK=ClockSignal("cxp_gtx_tx"),
+                i_TXUSRCLK2=ClockSignal("cxp_gtx_tx"),
+
+                # TX electrical
+                i_TXBUFDIFFCTRL=0b100,
+                i_TXDIFFCTRL=0b1000,
+
+                # RX Startup/Reset
+                i_RXPHDLYRESET=0,
+                i_RXDLYBYPASS=0,
+                i_RXPHALIGNEN=1 if rx_mode != "single" else 0,
+                i_GTRXRESET=rx_init.gtXxreset,
+                o_RXRESETDONE=rx_init.Xxresetdone,
+                i_RXDLYSRESET=rx_init.Xxdlysreset,
+                o_RXDLYSRESETDONE=rx_init.Xxdlysresetdone,
+                i_RXPHALIGN=rx_init.Xxphalign if rx_mode != "single" else 0,
+                i_RXDLYEN=rx_init.Xxdlyen if rx_mode != "single" else 0,
+                o_RXPHALIGNDONE=rx_init.Xxphaligndone,
+                i_RXUSERRDY=rx_init.Xxuserrdy,
+                p_RXPMARESET_TIME=1,
+                p_RXPCSRESET_TIME=1,
+
+                # RX AFE
+                p_RX_DFE_XYD_CFG=0,
+                p_RX_CM_SEL=0b11,               # RX_CM_SEL = 0b11: Common mode is programmable
+                p_RX_CM_TRIM=0b010,             # PMA_RSV[4],RX_CM_TRIM[2:0] = 0b1010: Common mode 800mV
+                i_RXDFEXYDEN=1,
+                i_RXDFEXYDHOLD=0,
+                i_RXDFEXYDOVRDEN=0,
+                i_RXLPMEN=1,                    # RXLPMEN = 1: LPM mode is enable for non scramble 8b10b data
+                p_RXLPM_HF_CFG=0b00000011110000,
+                p_RXLPM_LF_CFG=0b00000011110000,
+
+                p_RX_DFE_GAIN_CFG=0x0207EA,
+                p_RX_DFE_VP_CFG=0b00011111100000011,
+                p_RX_DFE_UT_CFG=0b10001000000000000,
+                p_RX_DFE_KL_CFG=0b0000011111110,
+                p_RX_DFE_KL_CFG2=0x3788140A,
+                p_RX_DFE_H2_CFG=0b000110000000,
+                p_RX_DFE_H3_CFG=0b000110000000,
+                p_RX_DFE_H4_CFG=0b00011100000,
+                p_RX_DFE_H5_CFG=0b00011100000,
+                p_RX_DFE_LPM_CFG=0x0904,        # RX_DFE_LPM_CFG = 0x0904: linerate <= 6.6Gb/s
+                                                #                = 0x0104: linerate > 6.6Gb/s
+
+                # RX clock
+                i_RXDDIEN=1,
+                # i_RXSYSCLKSEL=0b00,
+                i_RXOUTCLKSEL=0b010,
+                o_RXOUTCLK=self.rxoutclk,
+                i_RXUSRCLK=ClockSignal("cxp_gtx_rx"),
+                i_RXUSRCLK2=ClockSignal("cxp_gtx_rx"),
+
+                # RX Clock Correction Attributes
+                p_CLK_CORRECT_USE="FALSE",
+                p_CLK_COR_SEQ_1_1=0b0100000000,
+                p_CLK_COR_SEQ_2_1=0b0100000000,
+                p_CLK_COR_SEQ_1_ENABLE=0b1111,
+                p_CLK_COR_SEQ_2_ENABLE=0b1111,
+
+                # RX data
+                p_RX_DATA_WIDTH=40,
+                p_RX_INT_DATAWIDTH=1,   # 1 if a line rate is greater than 6.6 Gbps
+                o_RXDISPERR=Cat(rxdata[9], rxdata[19], rxdata[29], rxdata[39]),
+                o_RXCHARISK=Cat(rxdata[8], rxdata[18], rxdata[28], rxdata[38]),
+                o_RXDATA=Cat(rxdata[:8], rxdata[10:18], rxdata[20:28], rxdata[30:38]),
+
+                # RX Byte and Word Alignment Attributes
+                p_ALIGN_COMMA_DOUBLE="FALSE",
+                p_ALIGN_COMMA_ENABLE=0b1111111111,
+                p_ALIGN_COMMA_WORD=4, # align comma to rxdata[:10] only
+                p_ALIGN_MCOMMA_DET="TRUE",
+                p_ALIGN_MCOMMA_VALUE=0b1010000011,
+                p_ALIGN_PCOMMA_DET="TRUE",
+                p_ALIGN_PCOMMA_VALUE=0b0101111100,
+                p_SHOW_REALIGN_COMMA="FALSE",
+                p_RXSLIDE_AUTO_WAIT=7,
+                p_RXSLIDE_MODE="OFF",
+                p_RX_SIG_VALID_DLY=10,
+                i_RXPCOMMAALIGNEN=comma_aligner_en,
+                i_RXMCOMMAALIGNEN=comma_aligner_en,
+                i_RXCOMMADETEN=1,
+                i_RXSLIDE=0,
+                o_RXBYTEISALIGNED=comma_aligned,
+                o_RXBYTEREALIGN=comma_realigned,
+                o_RXCOMMADET=comma_det,
+
+                # RX 8B/10B Decoder Attributes
+                p_RX_DISPERR_SEQ_MATCH="FALSE",
+                p_DEC_MCOMMA_DETECT="TRUE",
+                p_DEC_PCOMMA_DETECT="TRUE",
+                p_DEC_VALID_COMMA_ONLY="FALSE",
+
+                # RX Buffer Attributes
+                p_RXBUF_ADDR_MODE="FAST",
+                p_RXBUF_EIDLE_HI_CNT=0b1000,
+                p_RXBUF_EIDLE_LO_CNT=0b0000,
+                p_RXBUF_EN="FALSE",
+                p_RX_BUFFER_CFG=0b000000,
+                p_RXBUF_RESET_ON_CB_CHANGE="TRUE",
+                p_RXBUF_RESET_ON_COMMAALIGN="FALSE",
+                p_RXBUF_RESET_ON_EIDLE="FALSE",     # RXBUF_RESET_ON_EIDLE = FALSE: OOB is disabled
+                p_RXBUF_RESET_ON_RATE_CHANGE="TRUE",
+                p_RXBUFRESET_TIME=0b00001,
+                p_RXBUF_THRESH_OVFLW=61,
+                p_RXBUF_THRESH_OVRD="FALSE",
+                p_RXBUF_THRESH_UNDFLW=4,
+                p_RXDLY_CFG=0x001F,
+                p_RXDLY_LCFG=0x030,
+                p_RXDLY_TAP_CFG=0x0000,
+                p_RXPH_CFG=0xC00002,
+                p_RXPHDLY_CFG=0x084020,
+                p_RXPH_MONITOR_SEL=0b00000,
+                p_RX_XCLK_SEL="RXUSR",
+                p_RX_DDI_SEL=0b000000,
+                p_RX_DEFER_RESET_BUF_EN="TRUE",
+
+                # CDR Attributes
+                p_RXCDR_CFG=0x03_0000_23FF_1008_0020,   # LPM @ 0.5G-1.5625G , 8B/10B encoded data, CDR setting < +/- 200ppm
+                                                        # (See UG476 (v1.12.1), p.206)
+                p_RXCDR_FR_RESET_ON_EIDLE=0b0,
+                p_RXCDR_HOLD_DURING_EIDLE=0b0,
+                p_RXCDR_PH_RESET_ON_EIDLE=0b0,
+                p_RXCDR_LOCK_CFG=0b010101,
+
+                # Pads
+                i_GTXRXP=pads.rxp,
+                i_GTXRXN=pads.rxn,
+                o_GTXTXP=pads.txp,
+                o_GTXTXN=pads.txn,
+
+                # Dynamic Reconfiguration Ports
+                p_IS_DRPCLK_INVERTED=0b0,
+                i_DRPADDR=self.daddr,
+                i_DRPCLK=self.dclk,
+                i_DRPEN=self.den,
+                i_DRPWE=self.dwen,
+                i_DRPDI=self.din,
+                o_DRPDO=self.dout,
+                o_DRPRDY=self.dready,
+
+                # ! loopback for debugging
+                i_LOOPBACK = self.loopback_mode,
+                p_TX_LOOPBACK_DRIVE_HIZ = "FALSE",
+                p_RXPRBS_ERR_LOOPBACK = 0b0,
+
+                # Other parameters
+                p_PCS_RSVD_ATTR=(
+                    (tx_mode != "single") << 1 |    # PCS_RSVD_ATTR[1] = 0: TX Single Lane Auto Mode
+                                                    #                  = 1: TX Manual Mode
+                    (rx_mode != "single") << 2 |    #              [2] = 0: RX Single Lane Auto Mode
+                                                    #                  = 1: RX Manual Mode
+                    0 << 8                          #              [8] = 0: OOB is disabled
+                ),
+                i_RXELECIDLEMODE=0b11,              # RXELECIDLEMODE = 0b11: OOB is disabled
+                p_RX_DFE_LPM_HOLD_DURING_EIDLE=0b0,
+                p_ES_EYE_SCAN_EN="TRUE",            # Must be TRUE for GTX
+            )
+
+
+        # TX clocking
+        # A PLL is used to generate the correct frequency for TXUSRCLK (UG476 Equation 3-1)
+        self.clock_domains.cd_cxp_gtx_tx = ClockDomain()
+        txpll_fb_clk = Signal()
+        txoutclk_buf = Signal()
+        txpll_clkout = Signal()
+
+        self.txpll_reset = Signal()
+        self.pll_daddr = Signal(7)
+        self.pll_dclk = Signal()
+        self.pll_den = Signal()
+        self.pll_din = Signal(16)
+        self.pll_dwen = Signal()
+
+        self.txpll_locked = Signal()
+        self.pll_dout = Signal(16)
+        self.pll_dready = Signal()
+        self.specials += [
+            Instance("PLLE2_ADV",
+                p_BANDWIDTH="HIGH",
+                o_LOCKED=self.txpll_locked,
+                i_RST=self.txpll_reset,
+                
+                p_CLKIN1_PERIOD=1e9/sys_clk_freq, # ns
+                i_CLKIN1=txoutclk_buf,
+
+                # VCO @ 1.25GHz 
+                p_CLKFBOUT_MULT=pll_fbout_mult, p_DIVCLK_DIVIDE=1,
+                i_CLKFBIN=txpll_fb_clk, o_CLKFBOUT=txpll_fb_clk, 
+
+                # frequency = linerate/40
+                p_CLKOUT0_DIVIDE=txusr_pll_div, p_CLKOUT0_PHASE=0.0, o_CLKOUT0=txpll_clkout,
+
+                # Dynamic Reconfiguration Ports
+                i_DADDR = self.pll_daddr,
+                i_DCLK = self.pll_dclk,
+                i_DEN = self.pll_den,
+                i_DI = self.pll_din,
+                i_DWE = self.pll_dwen,
+                o_DO = self.pll_dout,
+                o_DRDY = self.pll_dready,
+            ),
+            Instance("BUFG", i_I=self.txoutclk, o_O=txoutclk_buf),
+            Instance("BUFG", i_I=txpll_clkout, o_O=self.cd_cxp_gtx_tx.clk),
+            AsyncResetSynchronizer(self.cd_cxp_gtx_tx, ~self.txpll_locked & ~tx_init.done)
+        ]
+
+        # RX clocking
+        # the CDR matches the required frequency for RXUSRCLK, no need for PLL 
+        self.clock_domains.cd_cxp_gtx_rx = ClockDomain()
+        self.specials += [
+            Instance("BUFG", i_I=self.rxoutclk, o_O=self.cd_cxp_gtx_rx.clk),
+            AsyncResetSynchronizer(self.cd_cxp_gtx_rx, ~rx_init.done)
+        ]
+
+        self.comb += [
+            txdata.eq(Cat(self.encoder.output[0], self.encoder.output[1], self.encoder.output[2], self.encoder.output[3])),
+            self.decoders[0].input.eq(rxdata[:10]),
+            self.decoders[1].input.eq(rxdata[10:20]),
+            self.decoders[2].input.eq(rxdata[20:30]),
+            self.decoders[3].input.eq(rxdata[30:]),
+        ]
+
+
+        self.submodules.comma_checker = comma_checker = Comma_Checker(0b0101111100)
+        self.comb += [
+            comma_checker.data.eq(rxdata),
+            comma_checker.comma_aligned.eq(comma_aligned),
+            comma_checker.comma_realigned.eq(comma_realigned),
+            comma_checker.comma_det.eq(comma_det),
+            comma_aligner_en.eq(comma_checker.aligner_en),
+            self.rx_ready.eq(comma_checker.ready_sys),
+
+            rx_init.restart.eq(self.rx_restart | comma_checker.restart_sys),
+            tx_init.restart.eq(self.tx_restart),
+        ]

src/gateware/cxp_upconn.py

@@ -0,0 +1,279 @@
+from migen import *
+from migen.genlib.resetsync import AsyncResetSynchronizer
+from migen.genlib.coding import PriorityEncoder
+
+from misoc.cores.code_8b10b import SingleEncoder
+from misoc.interconnect import stream
+from misoc.interconnect.csr import *
+
+
+class CXP_UpConn(Module, AutoCSR):
+    nfifos = 3
+    def __init__(self, pads, sys_clk_freq, pmod, fifo_depth=32):
+        self.clock_domains.cd_cxp_upconn = ClockDomain()
+        self.clk_reset = CSRStorage(reset=1)
+        self.bitrate2x_enable = CSRStorage()
+        self.tx_enable = CSRStorage()
+
+        # # #
+
+        pll_locked = Signal()
+        pll_fb_clk = Signal()
+        pll_cxpclk = Signal()
+        pll_cxpclk2x = Signal()
+
+        self.specials += [
+            Instance("PLLE2_ADV",
+                p_BANDWIDTH="HIGH",
+                o_LOCKED=pll_locked,
+                i_RST=ResetSignal("sys"),
+                
+                p_CLKIN1_PERIOD=1e9/sys_clk_freq, # ns
+                i_CLKIN1=ClockSignal("sys"),
+
+                # VCO @ 1.25GHz 
+                p_CLKFBOUT_MULT=1.25e9/sys_clk_freq, p_DIVCLK_DIVIDE=1,
+                i_CLKFBIN=pll_fb_clk, o_CLKFBOUT=pll_fb_clk, 
+
+                # 20.83MHz (48ns)
+                p_CLKOUT0_DIVIDE=60, p_CLKOUT0_PHASE=0.0, o_CLKOUT0=pll_cxpclk,
+
+                # 41.66MHz (24ns) for downconnection over 6.25Gpbs
+                p_CLKOUT1_DIVIDE=30, p_CLKOUT1_PHASE=0.0, o_CLKOUT1=pll_cxpclk2x,
+            ),
+            Instance("BUFGMUX",
+                i_I0=pll_cxpclk,
+                i_I1=pll_cxpclk2x,
+                i_S=self.bitrate2x_enable.storage,
+                o_O=self.cd_cxp_upconn.clk
+            ),
+            AsyncResetSynchronizer(self.cd_cxp_upconn, ~pll_locked | self.clk_reset.storage)
+        ]
+
+        self.submodules.fsm = ClockDomainsRenamer("cxp_upconn")(FSM(reset_state="WAIT_TX_ENABLE"))
+        self.submodules.tx_fifos = TxFIFOs(self.nfifos, fifo_depth)
+        self.submodules.tx_idle = TxIdle()
+
+        o = Signal()
+        tx_en = Signal()
+        tx_bitcount = Signal(max=10)
+        tx_wordcount = Signal(max=4)
+        tx_reg = Signal(10)
+
+        disp = Signal()
+        priorities = Signal(max=self.nfifos)
+        idling = Signal()
+
+        # startup sequence
+        self.fsm.act("WAIT_TX_ENABLE",
+            If(self.tx_enable.storage,
+                NextValue(self.tx_idle.word_idx, 0),
+                NextValue(tx_wordcount, 0),
+                NextValue(tx_bitcount, 0),
+                NextState("LOAD_CHAR")
+            )
+        )
+
+        self.fsm.act("LOAD_CHAR",
+            NextValue(idling, 1),
+            NextValue(self.tx_idle.source_ack, 1),
+            NextValue(tx_reg, self.tx_idle.source_data),
+            NextValue(disp, self.tx_idle.disp_out),
+            NextState("START_TX")
+        )
+
+        self.fsm.act("START_TX",
+            tx_en.eq(1),
+            If((~self.tx_enable.storage) & (tx_wordcount == 3),
+                NextState("WAIT_TX_ENABLE")
+            )
+        )
+
+        self.sync.cxp_upconn += [
+            self.tx_fifos.disp_in.eq(disp),
+            self.tx_idle.disp_in.eq(disp),
+
+            If(tx_en,
+                o.eq(tx_reg[0]),
+                tx_reg.eq(Cat(tx_reg[1:], 0)),
+                tx_bitcount.eq(tx_bitcount + 1),   
+
+
+                # char boundary
+                If(tx_bitcount == 9,
+                    tx_bitcount.eq(0),
+                    If((~self.tx_fifos.pe.n) & (self.tx_fifos.pe.o == 0),
+                        # trigger packets are inserted at char boundary and don't contribute to word count
+                        tx_reg.eq(self.tx_fifos.source_data[0]),
+                        self.tx_fifos.source_ack[0].eq(1),
+                        disp.eq(self.tx_fifos.disp_out[0]),
+                    ).Else(
+                        # word boundary
+                        If(tx_wordcount == 3,
+                            tx_wordcount.eq(0),
+                            If(~self.tx_fifos.pe.n,
+                                # priority lv 1 & 2 packets are inserted at word boundary
+                                idling.eq(0),
+                                priorities.eq(self.tx_fifos.pe.o),
+                                self.tx_fifos.source_ack[self.tx_fifos.pe.o].eq(1),
+                                tx_reg.eq(self.tx_fifos.source_data[self.tx_fifos.pe.o]),
+                                disp.eq(self.tx_fifos.disp_out[self.tx_fifos.pe.o]),
+                            ).Else(
+                                idling.eq(1),
+                                self.tx_idle.source_ack.eq(1),
+                                tx_reg.eq(self.tx_idle.source_data),    
+                                disp.eq(self.tx_idle.disp_out),
+                            )
+                        ).Else(
+                            tx_wordcount.eq(tx_wordcount + 1),
+                            If(~idling,
+                                self.tx_fifos.source_ack[priorities].eq(1),
+                                tx_reg.eq(self.tx_fifos.source_data[priorities]),
+                                disp.eq(self.tx_fifos.disp_out[priorities]),
+                            ).Else(
+                                self.tx_idle.source_ack.eq(1),
+                                tx_reg.eq(self.tx_idle.source_data),    
+                                disp.eq(self.tx_idle.disp_out),
+                            )
+                        ),       
+                    )
+                )
+            ).Else(
+                o.eq(0)
+            )
+        ]
+        # DEBUG: remove pads
+        self.encoded_data = CSRStatus(10)
+        self.sync.cxp_upconn +=[
+            If(tx_bitcount == 0,
+                self.encoded_data.status.eq(tx_reg),
+            )
+        ]
+       
+        ninth_bit = Signal()
+        word_bound = Signal()
+
+        p0 = Signal()
+        p3 = Signal()
+        self.comb += [
+           ninth_bit.eq(tx_bitcount == 9),
+           word_bound.eq(tx_wordcount == 3),
+           p0.eq(self.tx_idle.word_idx == 0),
+           p3.eq(self.tx_idle.word_idx == 3),
+        ] 
+        self.specials += [
+            # # debug sma
+            # Instance("OBUF", i_I=o, o_O=pads.p_tx),
+            # Instance("OBUF", i_I=self.cd_cxp_upconn.clk, o_O=pads.n_rx),
+
+            # # pmod 0-7 pin
+            # Instance("OBUF", i_I=o, o_O=pmod[0]),
+            # Instance("OBUF", i_I=self.cd_cxp_upconn.clk, o_O=pmod[1]),
+            # Instance("OBUF", i_I=~self.tx_fifos.pe.n, o_O=pmod[2]),
+            # Instance("OBUF", i_I=ninth_bit, o_O=pmod[3]),
+            # Instance("OBUF", i_I=word_bound, o_O=pmod[4]),
+            # Instance("OBUF", i_I=idling, o_O=pmod[5]),
+            # # Instance("OBUF", i_I=self.tx_fifos.source_ack[0], o_O=pmod[6]),
+            # # Instance("OBUF", i_I=self.tx_fifos.source_ack[2], o_O=pmod[6]),
+            # # Instance("OBUF", i_I=self.tx_fifos.source_ack[1], o_O=pmod[7]),
+            # Instance("OBUF", i_I=p0, o_O=pmod[6]),
+            # Instance("OBUF", i_I=p3, o_O=pmod[7]),
+        ]
+        self.symbol0 = CSR(9)
+        self.symbol1 = CSR(9)
+        self.symbol2 = CSR(9)
+
+        self.sync += [
+            self.tx_fifos.sink_stb[0].eq(self.symbol0.re),
+            self.tx_fifos.sink_data[0].eq(self.symbol0.r),
+            self.tx_fifos.sink_stb[1].eq(self.symbol1.re),
+            self.tx_fifos.sink_data[1].eq(self.symbol1.r),
+            self.tx_fifos.sink_stb[2].eq(self.symbol2.re),
+            self.tx_fifos.sink_data[2].eq(self.symbol2.r),
+        ]
+
+class TxFIFOs(Module):
+    def __init__(self, nfifos, fifo_depth):
+        self.disp_in = Signal()
+        self.disp_out = Array(Signal() for _ in range(nfifos))
+        
+        self.sink_stb = Signal(nfifos)
+        self.sink_ack = Signal(nfifos) 
+        self.sink_data = [Signal(9) for _ in range(nfifos)]
+        
+        self.source_ack = Array(Signal() for _ in range(nfifos))
+        self.source_data = Array(Signal(10) for _ in range(nfifos))
+
+        # # #
+
+        source_stb = Signal(nfifos)
+
+        for i in range(nfifos):
+            cdr = ClockDomainsRenamer({"write": "sys", "read": "cxp_upconn"})
+            fifo = cdr(stream.AsyncFIFO([("data", 9)], fifo_depth))
+            encoder = ClockDomainsRenamer("cxp_upconn")(SingleEncoder(True))
+            setattr(self.submodules, "tx_fifo" + str(i), fifo)
+            setattr(self.submodules, "tx_encoder" + str(i), encoder)
+            self.sync += [
+                fifo.sink.stb.eq(self.sink_stb[i]),
+                self.sink_ack[i].eq(fifo.sink.ack),
+                fifo.sink.data.eq(self.sink_data[i]),
+            ]
+            self.sync.cxp_upconn += [
+                encoder.d.eq(fifo.source.data[:8]),
+                encoder.k.eq(fifo.source.data[8]),
+                encoder.disp_in.eq(self.disp_in),
+                self.disp_out[i].eq(encoder.disp_out),
+
+                source_stb[i].eq(fifo.source.stb),
+                fifo.source.ack.eq(self.source_ack[i]),
+                self.source_data[i].eq(encoder.output),
+                # reset ack after asserted 
+                If(self.source_ack[i], self.source_ack[i].eq(0)),
+            ]
+
+        # FIFOs transmission priority
+        self.submodules.pe = PriorityEncoder(nfifos)
+        self.comb += self.pe.i.eq(source_stb)
+
+class TxIdle(Module):
+    def __init__(self):
+        self.disp_in = Signal()
+        self.disp_out = Signal()
+
+        self.word_idx = Signal(max=4)
+        self.source_ack = Signal()
+        self.source_data = Signal(10)
+        
+        # # #
+
+        # CXP 2.1 section 9.2.5 
+        IDLE_CHARS = Array([
+            #[char, k]
+            [0b10111100, 1], #K28.5
+            [0b00111100, 1], #K28.1
+            [0b00111100, 1], #K28.1
+            [0b10111100, 0], #D28.5
+        ])
+
+        encoder = ClockDomainsRenamer("cxp_upconn")(SingleEncoder(True))
+        self.submodules += encoder
+
+        self.sync.cxp_upconn += [
+            encoder.d.eq(IDLE_CHARS[self.word_idx][0]),
+            encoder.k.eq(IDLE_CHARS[self.word_idx][1]),
+            encoder.disp_in.eq(self.disp_in),
+            self.disp_out.eq(encoder.disp_out),
+            self.source_data.eq(encoder.output),
+
+            If(self.source_ack,
+                # reset after asserted
+                self.source_ack.eq(0),
+
+                If(self.word_idx != 3,
+                   self.word_idx.eq(self.word_idx + 1),
+                ).Else(
+                    self.word_idx.eq(0),
+                )
+            ),
+        ]

src/gateware/zc706.py

@@ -691,6 +691,11 @@ class CXP_FMC():
         )
         self.csr_devices.append("cxp")
 
+        # max freq of cxp_gtx_rx = linerate/internal_datawidth = 12.5Gbps/40 = 312.5MHz
+        platform.add_period_constraint(self.cxp.downconn.gtx.cd_cxp_gtx_tx.clk, 3.2)
+        platform.add_period_constraint(self.cxp.downconn.gtx.cd_cxp_gtx_rx.clk, 3.2)
+        platform.add_false_path_constraints(self.cxp.downconn.gtx.cd_cxp_gtx_tx.clk, self.cxp.downconn.gtx.cd_cxp_gtx_rx.clk)
+
         rtio_channels = []
         # FIXME remove this placeholder RTIO channel
         # There are too few RTIO channels and cannot be compiled (adr width issue of the lane distributor)

src/libboard_artiq/src/cxp_downconn.rs

@@ -0,0 +1,554 @@
+use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
+use libboard_zynq::{println, timer::GlobalTimer};
+use log::info;
+
+// use log::info;
+use crate::pl::csr;
+
+pub struct CXP_DownConn_Settings {
+    pub rxdiv: u8,
+    pub qpll_fbdiv: u8,
+}
+
+#[derive(Clone, Copy, Debug)]
+#[allow(non_camel_case_types)]
+pub enum CXP_SPEED {
+    CXP_1,
+    CXP_2,
+    CXP_3,
+    CXP_5,
+    CXP_6,
+    CXP_10,
+    CXP_12,
+}
+
+pub fn loopback_testing(timer: &mut GlobalTimer, speed: CXP_SPEED) {
+    println!("==============================================================================");
+    CXP_GTX::change_linerate(timer, speed);
+
+    unsafe {
+        info!("waiting for tx&rx setup...");
+        timer.delay_us(50_000);
+        info!(
+            "tx_phaligndone = {} | rx_phaligndone = {}",
+            csr::cxp::downconn_txinit_phaligndone_read(),
+            csr::cxp::downconn_rxinit_phaligndone_read(),
+        );
+
+        // enable txdata tranmission thought MGTXTXP, required by PMA loopback
+        csr::cxp::downconn_txenable_write(1);
+
+        info!("waiting for rx to align...");
+        while csr::cxp::downconn_rx_ready_read() != 1 {}
+        info!("rx ready!");
+
+        // loop {
+        for _ in 0..20 {
+            // NOTE: raw bits
+            // let data0 = csr::cxp::downconn_rxdata_0_read();
+            // let data1 = csr::cxp::downconn_rxdata_1_read();
+            // let data2 = csr::cxp::downconn_rxdata_2_read();
+            // let data3 = csr::cxp::downconn_rxdata_3_read();
+            // let rxready = csr::cxp::downconn_rx_ready_read();
+            // timer.delay_us(100);
+            // if data0 == 0b0101111100 || data0 == 0b1010000011 {
+            //     println!(
+            //         "data[0] = {:#012b} comma = {} | rx ready = {}",
+            //         data0,
+            //         data0 == 0b0101111100 || data0 == 0b1010000011,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // } else if data0 == 0b1001111100 || data0 == 0b0110000011 {
+            //     println!(
+            //         "data[0] = {:#012b} K28.1 | rx ready = {}",
+            //         data0,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // } else {
+            //     println!(
+            //         "data[0] = {:#012b} | rx ready = {}",
+            //         data0,
+            //         rxready,
+            //     );
+            //     timer.delay_us(1_000_000);
+            // }
+
+            // timer.delay_us(1_000_000);
+            // NOTE: raw bits
+            // let data0 = csr::cxp::downconn_rxdata_0_read();
+            // let data1 = csr::cxp::downconn_rxdata_1_read();
+            // let data2 = csr::cxp::downconn_rxdata_2_read();
+            // let data3 = csr::cxp::downconn_rxdata_3_read();
+            // println!(
+            //     "0b{:010b} {:010b} {:010b} {:010b}",
+            //     data0, data1, data2, data3
+            // );
+
+            // NOTE:decode data
+            // let data0_k = csr::cxp::downconn_decoded_k_0_read();
+            // let data1_k = csr::cxp::downconn_decoded_k_1_read();
+            // let data2_k = csr::cxp::downconn_decoded_k_2_read();
+            // let data3_k = csr::cxp::downconn_decoded_k_3_read();
+            let data0_decoded = csr::cxp::downconn_decoded_data_0_read();
+            let data1_decoded = csr::cxp::downconn_decoded_data_1_read();
+            let data2_decoded = csr::cxp::downconn_decoded_data_2_read();
+            let data3_decoded = csr::cxp::downconn_decoded_data_3_read();
+            println!(
+                "{:#04x} {:#04x} {:#04x} {:#04x}",
+                data0_decoded, data1_decoded, data2_decoded, data3_decoded,
+            );
+            // println!(
+            //     "decoded_data[0] = {:#04x} decoded_k[0] = {:#b} decoded_data[1] = {:#04x} decoded_k[1] = {:#b}",
+            //     data0_decoded,
+            //     data0_k,
+            //     data1_decoded,
+            //     data1_k,
+            // );
+        }
+    }
+}
+
+pub fn setup(timer: &mut GlobalTimer) {
+    unsafe {
+        info!("turning on pmc loopback mode...");
+        csr::cxp::downconn_loopback_mode_write(0b010); // Near-End PMA Loopback
+
+        // QPLL setup
+        csr::cxp::downconn_qpll_reset_write(1);
+        info!("waiting for QPLL/CPLL to lock...");
+        while csr::cxp::downconn_qpll_locked_read() != 1 {}
+        info!("QPLL locked");
+
+        // tx/rx setup
+        csr::cxp::downconn_tx_start_init_write(1);
+        csr::cxp::downconn_rx_start_init_write(1);
+
+        info!("waiting for tx & rx setup...");
+        timer.delay_us(50_000);
+        info!(
+            "tx_phaligndone = {} | rx_phaligndone = {}",
+            csr::cxp::downconn_txinit_phaligndone_read(),
+            csr::cxp::downconn_rxinit_phaligndone_read(),
+        );
+    }
+
+    CXP_GTX::change_linerate(timer, CXP_SPEED::CXP_1);
+}
+
+pub mod CXP_GTX {
+    use super::*;
+
+    struct RX_CDR_CFG {
+        pub cfg_reg0: u16, //0x0A8
+        pub cfg_reg1: u16, //0x0A9
+        pub cfg_reg2: u16, //0x0AA
+        pub cfg_reg3: u16, //0x0AB
+        pub cfg_reg4: u16, //0x0AC
+    }
+
+    pub fn change_linerate(timer: &mut GlobalTimer, speed: CXP_SPEED) {
+        info!("Changing datarate to {:?}", speed);
+        // DEBUG: DRP pll for TXUSRCLK = freq(linerate)/20
+        let settings = txusrclk::get_txusrclk_config(speed);
+        txusrclk::setup(timer, settings);
+
+        change_qpll_settings(speed);
+        change_cdr_cfg(speed);
+
+        unsafe {
+            csr::cxp::downconn_qpll_reset_write(1);
+            info!("waiting for QPLL/CPLL to lock...");
+            while csr::cxp::downconn_qpll_locked_read() != 1 {}
+            info!("QPLL locked");
+        }
+
+        unsafe {
+            csr::cxp::downconn_tx_restart_write(1);
+            csr::cxp::downconn_rx_restart_write(1);
+        }
+    }
+
+    fn change_qpll_settings(speed: CXP_SPEED) {
+        // Change QPLL_FBDIV
+        let qpll_div_reg = match speed {
+            CXP_SPEED::CXP_1 | CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 | CXP_SPEED::CXP_10 => 0x0120, // FB_Divider = 80
+            CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 | CXP_SPEED::CXP_12 => 0x0170,                    // FB_Divider = 100
+        };
+
+        println!("0x36 = {:#018b}", qpll_read(0x36));
+        qpll_write(0x36, qpll_div_reg);
+        println!("0x36 = {:#018b}", qpll_read(0x36));
+
+        let rxout_div = match speed {
+            CXP_SPEED::CXP_1 => 0b100,                      // 8
+            CXP_SPEED::CXP_2 | CXP_SPEED::CXP_3 => 0b011,   // 4
+            CXP_SPEED::CXP_5 | CXP_SPEED::CXP_6 => 0b010,   // 2
+            CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => 0b001, // 1
+        };
+
+        unsafe {
+            csr::cxp::downconn_rx_div_write(rxout_div);
+            csr::cxp::downconn_tx_div_write(rxout_div);
+        }
+    }
+
+    fn change_cdr_cfg(speed: CXP_SPEED) {
+        let cdr_cfg = match speed {
+            // rxout_div = 8
+            CXP_SPEED::CXP_1 => {
+                RX_CDR_CFG {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1008, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // rxout_div = 4
+            CXP_SPEED::CXP_2 | CXP_SPEED::CXP_5 => {
+                RX_CDR_CFG {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1010, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // rxout_div = 2
+            CXP_SPEED::CXP_3 | CXP_SPEED::CXP_6 => {
+                RX_CDR_CFG {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1020, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x0003, //0x0AC
+                }
+            }
+            // // Divided by 1
+            // CXP_SPEED::CXP_6 => {
+            //     RX_CDR_CFG {
+            //         cfg_reg0: 0x0020, //0x0A8
+            //         cfg_reg1: 0x1040, //0x0A9
+            //         cfg_reg2: 0x23FF, //0x0AA
+            //         cfg_reg3: 0x0000, //0x0AB
+            //         cfg_reg4: 0x0003, //0x0AC
+            //     }
+            // }
+            // rxout_div = 1
+            CXP_SPEED::CXP_10 | CXP_SPEED::CXP_12 => {
+                RX_CDR_CFG {
+                    cfg_reg0: 0x0020, //0x0A8
+                    cfg_reg1: 0x1040, //0x0A9
+                    cfg_reg2: 0x23FF, //0x0AA
+                    cfg_reg3: 0x0000, //0x0AB
+                    cfg_reg4: 0x000B, //0x0AC
+                }
+            }
+        };
+
+        gtx_write(0x0A8, cdr_cfg.cfg_reg0);
+        gtx_write(0x0A9, cdr_cfg.cfg_reg1);
+        gtx_write(0x0AA, cdr_cfg.cfg_reg2);
+        gtx_write(0x0AB, cdr_cfg.cfg_reg3);
+        gtx_write(0x0AC, cdr_cfg.cfg_reg4);
+    }
+
+    fn gtx_read(address: u16) -> u16 {
+        // DEBUG: DRPCLK need to be on for a few cycle before accessing other DRP ports
+        unsafe {
+            csr::cxp::downconn_gtx_daddr_write(address);
+            csr::cxp::downconn_gtx_dread_write(1);
+            while (csr::cxp::downconn_gtx_dready_read() != 1) {}
+            csr::cxp::downconn_gtx_dout_read()
+        }
+    }
+
+    fn gtx_write(address: u16, value: u16) {
+        // DEBUG: DRPCLK need to be on for a few cycle before accessing other DRP ports
+        unsafe {
+            csr::cxp::downconn_gtx_daddr_write(address);
+            csr::cxp::downconn_gtx_din_write(value);
+            csr::cxp::downconn_gtx_din_stb_write(1);
+            while (csr::cxp::downconn_gtx_dready_read() != 1) {}
+        }
+    }
+
+    fn qpll_read(address: u8) -> u16 {
+        unsafe {
+            csr::cxp::downconn_qpll_daddr_write(address);
+            csr::cxp::downconn_qpll_dread_write(1);
+            while (csr::cxp::downconn_qpll_dready_read() != 1) {}
+            csr::cxp::downconn_qpll_dout_read()
+        }
+    }
+
+    fn qpll_write(address: u8, value: u16) {
+        unsafe {
+            csr::cxp::downconn_qpll_daddr_write(address);
+            csr::cxp::downconn_qpll_din_write(value);
+            csr::cxp::downconn_qpll_din_stb_write(1);
+            while (csr::cxp::downconn_qpll_dready_read() != 1) {}
+        }
+    }
+}
+
+pub mod txusrclk {
+    use super::*;
+
+    pub struct PLLSetting {
+        pub clkout0_reg1: u16,  //0x08
+        pub clkout0_reg2: u16,  //0x09
+        pub clkfbout_reg1: u16, //0x14
+        pub clkfbout_reg2: u16, //0x15
+        pub div_reg: u16,       //0x16
+        pub lock_reg1: u16,     //0x18
+        pub lock_reg2: u16,     //0x19
+        pub lock_reg3: u16,     //0x1A
+        pub power_reg: u16,     //0x28
+        pub filt_reg1: u16,     //0x4E
+        pub filt_reg2: u16,     //0x4F
+    }
+
+    fn one_clock_cycle() {
+        unsafe {
+            csr::cxp::downconn_pll_dclk_write(1);
+            csr::cxp::downconn_pll_dclk_write(0);
+        }
+    }
+
+    fn set_addr(address: u8) {
+        unsafe {
+            csr::cxp::downconn_pll_daddr_write(address);
+        }
+    }
+
+    fn set_data(value: u16) {
+        unsafe {
+            csr::cxp::downconn_pll_din_write(value);
+        }
+    }
+
+    fn set_enable(en: bool) {
+        unsafe {
+            let val = if en { 1 } else { 0 };
+            csr::cxp::downconn_pll_den_write(val);
+        }
+    }
+
+    fn set_write_enable(en: bool) {
+        unsafe {
+            let val = if en { 1 } else { 0 };
+            csr::cxp::downconn_pll_dwen_write(val);
+        }
+    }
+
+    fn get_data() -> u16 {
+        unsafe { csr::cxp::downconn_pll_dout_read() }
+    }
+
+    fn drp_ready() -> bool {
+        unsafe { csr::cxp::downconn_pll_dready_read() == 1 }
+    }
+
+    #[allow(dead_code)]
+    fn read(address: u8) -> u16 {
+        set_addr(address);
+        set_enable(true);
+        // Set DADDR on the mmcm and assert DEN for one clock cycle
+        one_clock_cycle();
+
+        set_enable(false);
+        while !drp_ready() {
+            // keep the clock signal until data is ready
+            one_clock_cycle();
+        }
+        get_data()
+    }
+
+    fn write(address: u8, value: u16) {
+        set_addr(address);
+        set_data(value);
+        set_write_enable(true);
+        set_enable(true);
+        // Set DADDR, DI on the mmcm and assert DWE, DEN for one clock cycle
+        one_clock_cycle();
+
+        set_write_enable(false);
+        set_enable(false);
+        while !drp_ready() {
+            // keep the clock signal until write is finished
+            one_clock_cycle();
+        }
+    }
+
+    fn reset(rst: bool) {
+        unsafe {
+            let val = if rst { 1 } else { 0 };
+            csr::cxp::downconn_txpll_reset_write(val)
+        }
+    }
+
+    pub fn setup(timer: &mut GlobalTimer, settings: PLLSetting) {
+        if false {
+            info!("0x08 = {:#06x}", read(0x08));
+            info!("0x09 = {:#06x}", read(0x09));
+            info!("0x14 = {:#06x}", read(0x14));
+            info!("0x15 = {:#06x}", read(0x15));
+            info!("0x16 = {:#06x}", read(0x16));
+            info!("0x18 = {:#06x}", read(0x18));
+            info!("0x19 = {:#06x}", read(0x19));
+            info!("0x1A = {:#06x}", read(0x1A));
+            info!("0x28 = {:#06x}", read(0x28));
+            info!("0x4E = {:#06x}", read(0x4E));
+            info!("0x4F = {:#06x}", read(0x4F));
+        } else {
+            // Based on "DRP State Machine" from XAPP888
+            // hold reset HIGH during pll config
+            reset(true);
+            write(0x08, settings.clkout0_reg1);
+            write(0x09, settings.clkout0_reg2);
+            write(0x14, settings.clkfbout_reg1);
+            write(0x15, settings.clkfbout_reg2);
+            write(0x16, settings.div_reg);
+            write(0x18, settings.lock_reg1);
+            write(0x19, settings.lock_reg2);
+            write(0x1A, settings.lock_reg3);
+            write(0x28, settings.power_reg);
+            write(0x4E, settings.filt_reg1);
+            write(0x4F, settings.filt_reg2);
+            reset(false);
+
+            // wait for the pll to lock
+            timer.delay_us(100);
+
+            let locked = unsafe { csr::cxp::downconn_txpll_locked_read() == 1 };
+            info!("txusrclk locked = {}", locked);
+        }
+    }
+
+    pub fn get_txusrclk_config(speed: CXP_SPEED) -> PLLSetting {
+        match speed {
+            CXP_SPEED::CXP_1 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 32
+                // TXUSRCLK=62.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1410,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_2 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
+                // TXUSRCLK=62.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1208,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_3 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 16
+                // TXUSRCLK=78.125MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1208,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_5 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
+                // TXUSRCLK=125MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1104,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_6 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 8
+                // TXUSRCLK=156.25MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1104,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_10 => {
+                // CLKFBOUT_MULT = 8, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
+                // TXUSRCLK=250MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1082,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1104, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x5801,     //0x19
+                    lock_reg3: 0xdbe9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9808,     //0x4E
+                    filt_reg2: 0x9100,     //0x4F
+                }
+            }
+            CXP_SPEED::CXP_12 => {
+                // CLKFBOUT_MULT = 10, DIVCLK_DIVIDE = 1 , CLKOUT0_DIVIDE = 4
+                // TXUSRCLK=312.5MHz
+                PLLSetting {
+                    clkout0_reg1: 0x1082,  //0x08
+                    clkout0_reg2: 0x0000,  //0x09
+                    clkfbout_reg1: 0x1145, //0x14
+                    clkfbout_reg2: 0x0000, //0x15
+                    div_reg: 0x1041,       //0x16
+                    lock_reg1: 0x03e8,     //0x18
+                    lock_reg2: 0x7001,     //0x19
+                    lock_reg3: 0xf3e9,     //0x1A
+                    power_reg: 0x0000,     //0x28
+                    filt_reg1: 0x9908,     //0x4E
+                    filt_reg2: 0x1900,     //0x4F
+                }
+            }
+        }
+    }
+}

src/libboard_artiq/src/cxp_upconn.rs

@@ -0,0 +1,88 @@
+use embedded_hal::prelude::_embedded_hal_blocking_delay_DelayUs;
+use libboard_zynq::{println, timer::GlobalTimer};
+
+use crate::pl::csr;
+
+pub fn crc_test() {
+    let arr = [
+        0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, // CXP CRC-32
+        0x56, 0x86, 0x5D, 0x6f,
+    ];
+    let mut crc: u32; // seed = 0xFFFFFFFF
+
+    unsafe {
+        csr::cxp::crc_en_write(1);
+
+        for a in arr.iter() {
+            csr::cxp::crc_data_write(*a);
+            crc = csr::cxp::crc_value_read();
+            println!("input = {:#04x}", *a);
+            println!("CRC NOT(val.reverse) = {:#010x}", !crc.reverse_bits());
+            // since the input bit are reversed when entering the crc engine, the output char need to be reversed to cancel out on the receiver side
+            println!("CRC CXP = {:#010x}", crc);
+        }
+    }
+}
+
+pub fn tx_test(timer: &mut GlobalTimer) {
+    // the 8bit shift is k symbol
+    // const K28_1: u16 = 0x3C | (1 << 8);
+    // const K28_5: u16 = 0xBC | (1 << 8);
+    const D31_1: u16 = 0x3F;
+    const D01_1: u16 = 0x21;
+
+    const LEN: usize = 100;
+    let mut arr: [u16; LEN] = [0; LEN];
+
+    unsafe {
+        csr::cxp::upconn_clk_reset_write(1);
+        // csr::cxp::upconn_bitrate2x_enable_write(1);
+        csr::cxp::upconn_clk_reset_write(0);
+        loop {
+            // TODO: verify the char & word boundary thingy
+            for _ in 0..8 {
+                csr::cxp::upconn_symbol1_write(D01_1);
+            }
+
+            for _ in 0..4 {
+                csr::cxp::upconn_symbol2_write(D31_1);
+            }
+
+            timer.delay_us(1);
+            csr::cxp::upconn_tx_enable_write(1);
+
+            for i in 0..LEN {
+                arr[i] = get_encoded();
+            }
+            for i in 0..LEN {
+                match arr[i] {
+                    0b1010111001 | 0b0101001001 => {
+                        println!("encoded = {:#012b} D31.1", arr[i])
+                    }
+                    0b0111011001 | 0b1000101001 => {
+                        println!("encoded = {:#012b} D01.1", arr[i])
+                    }
+                    0b0011111010 | 0b1100000101 => {
+                        println!("encoded = {:#012b} K28.5 start idling....", arr[i])
+                    }
+                    0b0011111001 | 0b1100000110 => {
+                        println!("encoded = {:#012b} K28.1 idling...", arr[i])
+                    }
+                    0b0011101010 => {
+                        println!("encoded = {:#012b} D28.5 END idle", arr[i])
+                    }
+                    _ => {
+                        println!("encoded = {:#012b}", arr[i])
+                    }
+                }
+            }
+            println!("-------------------------------------");
+
+            csr::cxp::upconn_tx_enable_write(0);
+            timer.delay_us(2_000_000);
+        }
+    }
+    fn get_encoded() -> u16 {
+        unsafe { csr::cxp::upconn_encoded_data_read().reverse_bits() >> 6 }
+    }
+}

src/libboard_artiq/src/lib.rs

@@ -42,6 +42,11 @@ pub mod si5324;
 pub mod si549;
 use core::{cmp, str};
 
+#[cfg(has_cxp)]
+pub mod cxp_downconn;
+#[cfg(has_cxp)]
+pub mod cxp_upconn;
+
 pub fn identifier_read(buf: &mut [u8]) -> &str {
     unsafe {
         pl::csr::identifier::address_write(0);