artiq-zynq

morgan

Author	SHA1	Message	Date
morgan	ef5b06b187	downconn fw: update csr & add doc	2024-10-31 13:13:15 +08:00
morgan	cbd3058c83	downconn GW: fix timing violation testing tx: add buffer to improve timing testing tx: send idle more frequently downconn GW: remove unneeded stb signal downconn GW: add docs	2024-10-31 13:13:06 +08:00
morgan	0969a62aee	cxp GW: update cxp GW: add dchar decoder/injector	2024-10-31 13:12:33 +08:00
morgan	b370ec00ea	pipeline GW: fix packet loss & rx timing pipeline GW: add duplicate char decoder/injector pipeline GW: remove majority voting to fix timing	2024-10-31 13:12:09 +08:00
morgan	63112919a3	cxp coredevice driver: init	2024-10-24 10:55:10 +08:00
morgan	e15f32ec38	api: add cxp api support for CTRL packet	2024-10-24 10:55:10 +08:00
morgan	f96871a398	libboard_artiq: setup libboard_artiq: add cxp_downconn & cxp_upconn libboard_artiq: compile mem with cxp libboard_artiq: add cxp_proto libboard_artiq: add cxp_phys	2024-10-24 10:55:10 +08:00
morgan	fd9d9974cf	cxp downconn firmware: packet testing	2024-10-24 10:55:10 +08:00
morgan	ad9272f157	cxp upconn firmware: packet testing	2024-10-24 10:55:10 +08:00
morgan	be4a60ebec	cxp protocol: init testing: add packet printing helper function testing: add rx loopback proto FW: use memory buffer for tx and rx proto FW: use byteoder crate to handle endianness proto FW: add event packet reader and writer proto FW: add error correction for 4x char	2024-10-24 10:54:52 +08:00
morgan	2531f1b8bd	Cargo: add byteorder	2024-10-24 10:54:40 +08:00
morgan	445a3551c5	main: add testing	2024-10-24 10:54:40 +08:00
morgan	7322085dd2	cxp_phys: low speed serial & GTX setup downconn: add QPLL & GTX setup downconn: add DRP to change linerate up to 12.5Gbps downconn testing: add txuserclk config upconn: add low speed serital setup upconn & downconn: add linerate changer	2024-10-24 10:54:40 +08:00
morgan	ce52e132b4	zc706: add CXP_DEMO variant zc706: add fmc pads zc706: add constraint to fix comma alignment & setup/hold time issue zc706: add csr & mem group for cxp zc706: add CXP to rtio_channel	2024-10-24 10:54:40 +08:00
morgan	2bbe8a6af9	cxp: add PHY and pipeline testing: add loopback tx for rx testing testing: add trigger, trigger ack for testing cxp: add upconn & downconn phy cxp: add upconn & downconn pipeline cxp: add rtlink	2024-10-24 10:54:40 +08:00
morgan	3e5303b4ab	cxp pipeline: packet handling pipeline tx pipeline: add CRC32 inserter tx pipeline: add start & end of packet code inserter tx pipeline: add packet wrapper for start & stop packet indication tx pipeline: add code source for trigger & trigger ack packet tx pipeline: add packet for trigger & trigger ack tx pipeline: add test packet generator tx pipeline: add tx_command_packet for firmware tx command packet: add dma to store control packet rx pipeline: add reciever path rx pipeline: add trig ack checker rx pipeline: add packet decoder decoder: add test packet checher decoder: add packet DMA	2024-10-24 10:54:40 +08:00
morgan	134748d8b8	cxp upconn gw: add low speed serial PHY testing: add debug fifo output b4 encoder cxp upconn: add low speed serial cxp upconn: add reset, tx_busy, tx_enable cxp upconn: add clockgen module for 20.83Mbps & 41.66Mbps using counters cxp upconn: add oserdes using CEInserter	2024-10-24 10:54:40 +08:00
morgan	6497293bb5	cxp downconn gw: add gtx up to 12.5Gbps testing: add txusrclk mmcm & loopback mode testing: add debug output testing: send comma in the middle of long packet to maintain lock downconn: don't put IDLE into fifo downconn: add GTX and QPLL support downconn: add DRP for GTX and QPLL to support all CXP linerates GTX: add gtx with mmcm for TXUSRCLK freq requirement GTX: add loopback mode parameter for testing GTX: add gtx with 40bits internal width GTX: use built-in comma aligner GTX: add comma checker to ensure comma is aligner on highest linerate GTX: set QPLL as CLK source for GTX	2024-10-24 10:54:23 +08:00

1 changed files with 1 additions and 1 deletions

									
										2

src/gateware/cxp_downconn.py

										View File
									
					@ -83,7 +83,7 @@ class Receiver(Module):

					            cdc_fifo.source.connect(tx_fifo.sink),

					            cdc_fifo.source.connect(tx_fifo.sink),

					        ]

					        ]

					        idle_period = 50 # express in word

					        idle_period = 50 # press in word

					        word_count = Signal(max=idle_period)

					        word_count = Signal(max=idle_period)

					        # JANK: fix the every 98th word got eaten

					        # JANK: fix the every 98th word got eaten

Compare commits

18 Commits

465609b3f3 ... ef5b06b187

2

src/gateware/cxp_downconn.py

View File

Compare commits

18 Commits 465609b3f3 ... ef5b06b187

2 src/gateware/cxp_downconn.py Unescape Escape View File

18 Commits

465609b3f3 ... ef5b06b187

2

src/gateware/cxp_downconn.py

View File