0bc06186dd
libboard_artiq: setup
...
libboard_artiq: compile mem with cxp
libboard_artiq: add cxp_proto
libboard_artiq: add cxp_phys
libboard_artiq: add cxp
libboard artiq: add cxp_ctrl
2025-02-06 15:45:23 +08:00
96b17b3760
CXP firmware: camera setup init
...
cxp FW: add camera discovery
cxp FW: add multi channel discovery
cxp FW: add CXP version negotiate
cxp FW: add CXP operation linerate setter
cxp FW: add ConnectReset, CXP version readout
cxp FW: add connection tester
cxp FW: add master channel & topology checker
cxp FW: set packet max size to 2KiB
cxp FW: add frame buffer cfg & hostconnid
2025-02-06 15:45:23 +08:00
e728907704
cxp ctrl: Control packet handler
...
ctrl: add buildin delay_ms
ctrl: add proper RX Downconn ACK & REPLAY packet handling
ctrl: add send, receive & receive with timeout
ctrl: add write/read u32 u64
ctrl: add read bytes
2025-02-06 15:45:23 +08:00
4abd9abdb1
cxp protocol: init
...
testing: add packet printing helper function
proto FW: use memory buffer for tx and rx
proto FW: use byteoder crate to handle endianness
proto FW: add event packet reader and writer
proto FW: add error correction for 4x char
proto FW: add pending packet
proto fw: cleanup
2025-02-06 15:45:23 +08:00
0148ddfffa
Cargo: add byteorder
...
Cargo lock: add byteorder
Cargo: update
2025-02-06 15:45:23 +08:00
84e8f683fb
cxp_phys: low speed serial & GTX setup
...
downconn: add QPLL & GTX setup
downconn: add DRP to change linerate up to 12.5Gbps
downconn testing: add txuserclk config
upconn: add low speed serital setup
upconn & downconn: add linerate changer
2025-02-06 15:45:23 +08:00
547e62785d
cargo fmt
2025-01-28 11:14:31 +08:00
5dfedab12f
use forked core_io, up nalgebra
2025-01-28 11:14:28 +08:00
922a03b807
drtio: restore copy_work_buffer for transmission
2024-12-11 12:09:21 +08:00
e1f493f3ca
drtio: add InjectionRequest to expects_response
2024-11-26 14:58:24 +08:00
beb7e6f994
cargo fmt
2024-11-18 12:19:37 +08:00
4502a47aa6
drtio_proto: add allocate step for flashing
...
This avoids reallocation while transfering binaries.
2024-11-18 12:19:37 +08:00
6f1d727ca2
drtio-proto: avoid expecting response to drop link ack
2024-11-18 12:19:37 +08:00
59954829a2
drtio-proto: (N)ACK -> Reply { succeeded }
2024-11-18 12:19:37 +08:00
960864c847
drtio-proto: add coremgmt-over-drtio messages
2024-11-18 12:19:37 +08:00
244c7396d9
runtime: handle drtio-eem satellite disconnection
2024-11-18 12:08:44 +08:00
3390abd5a1
subkernels: pass now_mu when calling subkernels
2024-10-18 13:51:48 +08:00
81790257a5
Add ebaz4205 support ( #327 )
...
Co-authored-by: newell <newell.jensen@gmail.com>
Co-committed-by: newell <newell.jensen@gmail.com>
2024-10-05 15:05:49 +08:00
63f4783687
subkernels: support exceptions from subkernels
2024-07-31 17:22:29 +08:00
2b2ebb5354
aux: increase max payload size
2024-05-20 15:20:06 +08:00
35ea0ed2ca
WRPLL: add filter for DRTIO 100MHz
2024-05-08 18:50:55 +08:00
cdf4ff24c0
WRPLL: replace PI controller with new filter
2024-05-08 18:50:55 +08:00
285b02c4b1
WRPLL: remove anti-windup
2024-05-08 18:50:55 +08:00
61315c29b9
Si549: recalibrate TAG_OFFSET for ISERDESE2
2024-04-29 13:03:30 +08:00
a30c7d1f3a
runtime: drtio aux refactoring, revert async flag
2024-04-26 11:37:14 +08:00
2d10503c20
libboard_artiq: support multiple aux rx buffers
2024-04-24 17:12:57 +08:00
14fa038118
Firmware: Runtime WRPLL
...
runtime: drive CLK_SEL to true when si549 is used
runtime & libboard_artiq: allow standalone to use io_expander
si549: add bit bang mmcm dynamic configuration
si549: add frequency counter for refclk
rtio_clocking & si549: add 125Mhz wrpll refclk setup
2024-04-12 16:38:46 +08:00
b81323af30
Firmware: Satman skew calibration & tester
...
cargo template: add calibrate_wrpll_skew feature
tag collector: add TAG_OFFSET for Satman WRPLL
tag collector: add TAG_OFFSET getter & setter for calibration
wrpll: add skew tester and calibration
wrpll: gate calibration behind calibrate_wrpll_skew feature
2024-04-12 16:38:46 +08:00
291777f764
Firmware: Satman WRPLL
...
satman: drive CLK_SEL to true when si549 is used
satman : add main & helper si549 setup
satman : add WRPLL select_recovered_clock
si549: add tag collector to process gtx & main tags
si549: add frequency counter to set BASE_ADPLL
si549: add set_adpll for main & helper PLL
si549: add main & helper PLL
FIQ & si549: replace dummy with a custom handler for gtx & main tags ISR
2024-04-12 16:38:39 +08:00
a1d80fb93b
Firmware: Si549 and io_expander
...
io_expander: set CLK_SEL pin to output when si549 is used
io_expander: gate virtual leds for standalone
si549: add bit bang i2c
si549: add si549 programming
si549: add main & helper setup
2024-04-11 15:18:10 +08:00
63bf1c81d4
fiq: use dummy handler to fix compilation error
2024-03-07 13:26:52 +08:00
30e6bf4a3a
subkernel: add support for (d)dma
2024-01-11 12:33:02 +08:00
8f4e30dd9c
satman: support sub-subkernels, routing
2024-01-11 12:33:02 +08:00
e31a31c4ff
master: drtioaux:
...
- support async flag
- source in packets
- rerouting packets
2024-01-11 12:33:02 +08:00
b76f634686
drtio: increase robustness for longer payloads
2023-11-02 14:48:52 +08:00
43e4527392
fix kasli-soc demo compilation warning
2023-10-25 11:45:13 +08:00
b768d5648c
Add grabber module
...
Signed-off-by: Egor Savkin <es@m-labs.hk>
2023-10-16 14:35:20 +08:00
812aea33b3
rustfmt
2023-10-11 17:56:30 +08:00
a4d1be00c0
Firmware: Add drtio_eem.rs support
...
- Port from Artiq repo
- Initialize the drtio_eem on main, rtio_clocking
- Driver for eem_transceiver
2023-10-10 11:22:05 +08:00
e5aafad60d
force cargo to use our copy of zynq-rs
2023-10-09 18:27:58 +08:00
6785ca2c85
subkernel: port master support
2023-10-09 10:35:03 +08:00
37df7fd45b
cargo fmt
2023-08-30 16:14:35 +08:00
2ac7eedec1
firmware: fix compilation without virtual LEDs
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-30 15:33:44 +08:00
622d267d55
add virtual LEDs, improve IO expander setup, drive TX_DISABLE
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-08-28 16:08:10 +08:00
ca17cd419e
Revert "kasli_soc: add SFP0..3 LED indication"
...
This reverts commit 5111778363
2023-08-03 10:42:09 +08:00
5111778363
kasli_soc: add SFP0..3 LED indication
...
Co-authored-by: morgan <mc@m-labs.hk>
Co-committed-by: morgan <mc@m-labs.hk>
2023-07-24 16:30:14 +08:00
6088e6bb6f
fix cargo fmt
2023-05-24 10:00:48 +08:00
259b0ba1b7
satellite: port analyzer, drtio packets
2023-05-22 15:23:23 +08:00
48721ca9cb
apply rustfmt policies to ddma code
2023-03-27 15:53:32 +08:00
908dfc780e
satman: add dma support
2023-03-23 11:04:26 +08:00
